Search NASA⌕ Search

SEARCH · Search NASA

Results for “Supported iridium oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Decoupling the catalytic and degradation mechanisms of cobalt active sites during acidic water oxidation

Advancement of iridium-free catalysts for the low-pH oxygen evolution reaction (OER) is required to enable multi-gigawatt-scale proton-exchange water electrolysis. Cobalt-based materials might address this requirement, but little is known about the mechanism of operation of these OER catalysts at low pH. Here we investigate the nature and evolution of the active cobalt sites along with charge- and mass-transfer processes that support their catalytic function within a cobalt–iron–lead oxide material using in situ spectroscopic, gravimetric and electrochemical techniques. We demonstrate that corrosion of the cobalt sites and their reformation through electrooxidation of dissolved Co 2+ do not affect the catalytic mechanism and are decoupled from the OER. The OER-coupled charge transfer is supported by Co (3+δ)+ -oxo-species, which are structurally different from those reported for alkaline/near-neutral conditions and are formed on a relatively slow timescale of minutes. These mechanistic insights might assist in developing genuinely practical catalysts for this vital technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Selective Methane Oxidation by Heterogenized Iridium Catalysts

Oxidative methane (CH 4 ) carbonylation promises a direct route to the synthesis of value-added oxygenates such as acetic acid (CH 3 COOH). Here, in this paper, we report a strategy to realize oxidative CH 4 carbonylation through immobilized Ir complexes on an oxide support. Our immobilization approach not only enables direct CH 4 activation but also allows for easy separation and reutilization of the catalyst. Furthermore, we show that a key step, methyl migration, that forms a C–C bond, is sensitive to the electrophilicity of carbonyl, which can be tuned by a gentle reduction to the Ir centers. While the as-prepared catalyst that mainly featured Ir(IV) preferred CH 3 COOH production, a reduced catalyst featuring predominantly Ir(III) led to a significant increase of CH 3 OH production at the expense of the reduced yield of CH 3 COOH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Thrifting iridium for hydrogen

Using renewable electricity to produce hydrogen fuel reduces reliance on fossil fuels. Proton exchange membrane water electrolyzers (PEMWEs) are the highest-performing commercialized technology. These devices split water into oxygen gas and hydrogen ions (protons) at the anode. The protons then migrate through an ion-conducting polymer membrane (ionomer) to be reduced to hydrogen gas at the cathode. Further, the anode reaction’s harsh environment requires the use of precious-metal catalysts, such as iridium oxide (IrO x ). Given the expense and scarcity, the design of electrodes that minimize the use of precious metals without compromising the requisite stability and activity is desired for large-scale hydrogen production. On page 791 of this issue, Shi et al. report that anchoring IrO x catalysts onto porous cerium-oxide (CeO x ) supports maintains performance even with much reduced precious metal use.

08 HYDROGEN↗
DOE OSTI2022

Highly stable preferential carbon monoxide oxidation by dinuclear heterogeneous catalysts

Atomically dispersed catalysts have been shown highly active for preferential oxidation of carbon monoxide in the presence of excess hydrogen (PROX). However, their stability has been less than ideal. We show here that the introduction of a structural component to minimize diffusion of the active metal center can greatly improve the stability without compromising the activity. Using an Ir dinuclear heterogeneous catalyst (DHC) as a study platform, we identify two types of oxygen species, interfacial and bridge, that work in concert to enable both activity and stability. In conclusion, the work sheds important light on the synergistic effect between the active metal center and the supporting substrate and may find broad applications for the use of atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Theoretical Prediction and Experimental Verification of IrO x Supported on Titanium Nitride for Acidic Oxygen Evolution Reaction

Reducing iridium (Ir) catalyst loading for acidic oxygen evolution reaction (OER) is a critical strategy for large-scale hydrogen production via proton exchange membrane (PEM) water electrolysis. However, simultaneously achieving high activity, long-term stability, and reduced material cost remains challenging. To address this challenge, we develop a frame-work by combining density functional theory (DFT) prediction using model surfaces and proof-of-concept experimental ver-ification using thin films and nanoparticles. DFT results predict that oxidized Ir monolayers over titanium nitride (IrO x /TiN) should display higher OER activity than IrO x while reducing Ir loading. Further, this prediction is verified by depositing Ir monolayers over TiN thin films via physical vapor deposition. The promising thin film results are then extended to commercially viable powder IrO x /TiN catalysts, which demonstrate a lower overpotential and higher mass activity than commercial IrO 2 , and a long-term stability of 250 hours to maintain a current density of 10 mA cm -2 . The superior OER performance of IrO x /TiN is further confirmed using proton exchange membrane water electrolyzer (PEMWE), which shows a lower cell voltage than commercial IrO 2 to achieve a current density of 1 A cm -2 . Both DFT and in situ X-ray absorption spectroscopy reveal that the high OER performance of IrO x /TiN strongly depends on the IrO x - TiN interaction via direct Ir-Ti bonding. This study highlights the importance of close interaction between theoretical prediction based on mechanistic understanding and experimental verification based on thin film model catalysts to facilitate the development of more practical powder IrO x /TiN catalysts with high activity and stability for acidic OER.

08 HYDROGEN↗
DOE OSTI2021

Electrolysis on a Chip with Tunable Thin Film Nanostructured PGM Electrocatalysts Generated from Self-Assembled Block Copolymer Templates

Self-assembled block copolymers are promising templates for fabricating thin film materials with tuned periodic feature sizes and geometry at the nanoscale. Here, a series of nanostructured platinum and iridium oxide electrocatalysts templated from poly(styrene)-block-poly(vinyl pyridine) (PSbPVP) block copolymers via an incipient wetness impregnation (IWI) pathway is reported. Both nanowire and nanocylinder electrocatalysts of varying feature sizes are assessed and higher catalyst loadings are achieved by the alkylation of the pyridine moieties in the PVP block prior to IWI. Electrocatalyst evaluations featuring hydrogen pump and water electrolysis demonstrations are carried out on interdigitated electrode (IDE) chips flexible with liquid supporting electrolytes and thin film polymer electrolytes. Notably, the mass activities of the nanostructured electrocatalysts from alkylated block copolymer templates are 35%–94% higher than electrocatalysts from non-alkylated block copolymer templates. Standing cylinder nanostructures lead to higher mass activities than lamellar variants despite their not having the largest surface area per unit catalyst loading demonstrating that mesostructure architectures have a profound impact on reactivity. Overall, IDE chips with model thin film electrocatalysts prepared from self-assembled block copolymers offer a high-throughput experimental method for correlating electrocatalyst nanostructure and composition to electrochemical reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Supported Organoiridium-Pincer Catalysts for the Nonoxidative Dehydrogenation of High-Density Polyethylene

The iridium-pincer complex {p-OP( t Bu) 2 -C 6 H 2 -2,6-OP( t Bu) 2 ] 2 }Ir(C 2 H 4 ) ( P [Ir]) has been reported as a stable and active catalyst toward alkane dehydrogenation in homogeneous and supported heterogeneous systems. Dehydrogenation has been shown as a practical method toward functional polyolefins, with dehydrogenated high-density polyethylene (deHDPE) demonstrated as a valuable synthon for upcycling, as orthogonal C-H strategies are key to end-of-life upcycling. The heterogenization of P [Ir] on oxides (SiO 2 , Al 2 O 3 , and TiO 2 ; P [Ir]/E y O x ) yields a mixture of organometallic Ir-fragments whose catalytic nonoxidative dehydrogenation activity is modulated by the binding modes of the active metal on the surface. The binding mode was elucidated by a combination of solid-state NMR and XAFS analyses and supported by DFT calculations. Surface binding through the ligand enables active organoiridium that catalyzes internal olefination of deHDPE up to 1.23 mol % at 200 °C under dynamic vacuum. Alternatively, when the organoiridium is bonded though the metal center (Ir-O SiO ), catalyst activity is negligible. Furthermore, the catalytic activity of P [Ir]/SiO 2 showed comparable reactivity with the homogeneous analogue under the same catalytic conditions, and the heterogenized catalyst can be reused up to three cycles. In conclusion, this work highlights the importance of understanding how organometallic precursors react with hydroxylated metal oxide surfaces to establish structure-property relationships.

Hunt, Samuel B. [Argonne National Laboratory (ANL)↗
DOE OSTI2024

Ruthenium-lead oxide for acidic oxygen evolution reaction in proton exchange membrane water electrolysis

Developing an active and stable anode catalyst for the proton exchange membrane water electrolyzer (PEM-WE) is a critical objective to enhance the economic viability of green hydrogen technology. However, the expensive iridium-based electrocatalyst remains the sole practical material with industrial-level stability for the acidic oxygen evolution reaction (OER) at the anode. Ruthenium-based catalysts have been proposed as more cost-effective alternatives with improved activity, though their stability requires enhancement. The current urgent goal is to reduce costs and noble metal loading of the OER catalyst while maintaining robust activity and stability. Here, in this study, we design a Ru-based OER catalyst incorporating Pb as a supporting element. This electrocatalyst exhibits an OER overpotential of 201 mV at 10 mA.cm -2 , simultaneously reducing Ru noble metal loading by similar to 40%. Normalization of the electrochemically active surface area unveils improved intrinsic activity compared to the pristine RuO 2 catalyst. During a practical stability test in a PEM-WE setup, our developed catalyst sustains stable performance over 300 h without notable degradation, underscoring its potential for future applications as a reliable anodic catalyst.

Electrocatalysis↗
DOE OSTI2020

Supported Metal Pair-Site Catalysts

Complexes with neighboring metal centers in isolated pairs and their analogues on surfaces are drawing increasing attention as catalysts. These include molecular homogeneous catalysts incorporating various ligands, enzymes, and solids that include pairs of metal atoms mounted on supports. Catalysts in this broad class are active for numerous reactions and offer unexplored opportunities to address challenging reactions, such as oxidation of methane and oxidation of water in artificial photosynthesis. The subject of supported metal pair-site catalysts is in its infancy, facing challenges in (a) precise synthesis, (b) structure determination at the atomic scale, and (c) stabilization in reactive atmospheres. In this Perspective, we summarize key characteristics of molecular and enzymatic catalysts that incorporate neighboring metal centers and build on this foundation to assess the emerging literature of metal pair-site catalysts on various supports. The supported catalysts include those synthesized by anchoring molecular dinuclear precursors to support surfaces and those synthesized by selective formation of dinuclear surface species from mononuclear surface species. Examples of metals in this class are rhodium and iridium, and examples of supports are MgO and Fe 2 O 3 . We summarize characterization of these materials by electron microscopy and spectroscopy, emphasizing atomic-resolution aberration-corrected scanning transmission electron microscopy and spectroscopies that provide atomic-scale structural information and allow characterization of functioning catalysts, especially X-ray absorption spectroscopy. Finally, we list some opportunities for research, including suggestions that might lead to structurally well-defined supported metal pair-sites with new catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Remotely Bonded Bridging Dioxygen Ligands Enhance Hydrogen Transfer in a Silica-Supported Tetrairidium Cluster Catalyst

A longstanding challenge in catalysis by noble metals has been to understand the origin of enhancements of rates of hydrogen transfer that result from bonding of oxygen near metal sites. We investigated structurally well-defined catalysts consisting of supported tetrairidium carbonyl clusters with single-atom (apical iridium) catalytic sites for ethylene hydrogenation. Reaction of the clusters with ethylene and H 2 followed by O 2 led to the onset of catalytic activity as a terminal CO ligand at each apical Ir atom was removed and bridging dioxygen ligands replaced CO ligands at neighboring (basal-plane) sites. The presence of the dioxygen ligands caused a 6-fold increase in the catalytic reaction rate, which is explained by the electron-withdrawing capability induced by the bridging dioxygen ligands, consistent with the inference that reductive elimination is rate determining. Electronic structure calculations demonstrate an additional role of the dioxygen ligands, changing the mechanism of hydrogen transfer from that involving equatorial hydride ligands to that involving bridging hydride ligands. This mechanism is made evident by an inverse kinetic isotope effect observed in ethylene hydrogenation reactions with H 2 and, alternatively, with D 2 on the cluster incorporating the dioxygen ligands, and is a consequence of quasi-equilibrated hydrogen transfer in this catalyst. The same mechanism accounts for rate enhancements induced by the bridging dioxygen ligands for the catalytic reaction of H 2 with D 2 to give HD. Here, we posit that the mechanism involving bridging hydride ligands facilitated by oxygen ligands remote from the catalytic site may have some generality in catalysis by oxide-supported noble metals.

02 PETROLEUM↗
DOE OSTI2020

IHS-60 Stored Energy Analysis

The IHS-60 consists of a General Purpose Heat Source (GPHS) Fueled Clad (FC) that has been hot isostatically pressed to eliminate the gap between the iridium clad and the fuel pellet, thus preventing differential motion between the pellet and the clad in shock and vibration environments. The vented FC is enclosed within a Molybdenum barrier comprising the liner body and the lower support member. The slip- t Molybdenum liner members serve as a mechanical barrier to plutonia contact of the tantalum alloy (T-111) strength member in the event the iridium clad should fail. The slip- t liner is not a barrier to gaseous transport, so a tantalum getter is installed near the vent region of the FC to preclude potential oxygen transport to the T-111 interior surface. The T-111 strength member encloses the Molybdenum liner assembly and provides for both helium gas retention and isotope fuel containment under impact and external pressure environments. It is surrounded by an outer clad of Hastelloy-S which protects the strength member from external oxidation and corrosive sources during nominal operation and in the event of off-nominal operation or accidents. Both the strength member and outer clad parts are closed with seal welds. The strength member and outer clad are the primary containment members of the 60-Watt IHS. The iridium clad contains the fuel pellet during nominal operation and mild accident environments, but it is not considered to be a primary containment member.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Stabilization of Dinuclear Rhodium and Iridium Clusters on Layered Titanate and Niobate Supports

Atomically dispersed organometallic clusters can provide well-defined nuclearity of active sites for both fundamental studies as well as new regimes of activity and selectivity in chemical transformations. More recently, dinuclear clusters adsorbed onto solid surfaces have shown novel catalytic properties resulting from the synergistic effect of two metal centers to anchor different reactant species. Difficulty in synthesizing, stabilizing, and characterizing isolated atoms and clusters without agglomeration challenges allocating catalytic performance to atomic structure. Here, we explore the stability of dinuclear rhodium and iridium clusters adsorbed onto layered titanate and niobate supports using molecular precursors. Both systems maintain their nuclearity when Statistical analysis of HAADF-STEM images revealed that rhodium and iridium dimers had mean cluster-to-cluster distances very similar to what is expected from a random distribution of atoms over a large area, indicating that they are dispersed without aggregation. The stability of dinuclear rhodium clusters supported on titanate nanosheets was also investigated by X-ray absorption fine structure (EXAFS), DRIFTS, and first-principles calculations. Both X-ray absorption spectroscopy and HAADF-STEM simulations, guided by density functional theory (DFT)-optimized structure models, suggested that rhodium dimers adsorb onto the nanosheets in an end-on binding mode that is stable up to 100 degrees C under reducing conditions. Finally, this study highlights that crystalline nanosheets derived from layered metal oxides can be used as model supports to selectively stabilize dinuclear clusters, which could have implications for heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Probing the active sites of oxide encapsulated electrocatalysts with controllable oxygen evolution selectivity

Electrocatalysts encapsulated by nanoscopic overlayers can control the rate of redox reactions at the outer surface of the overlayer or at the buried interface between the overlayer and the active catalyst, leading to complex behavior in the presence of two competing electrochemical reactions. This study investigated oxide encapsulated electrocatalysts (OECs) comprised of iridium (Ir) thin films coated with an ultrathin (2–10 nm thick) silicon oxide (SiO x ) or titanium oxide (TiO x ) overlayer. The performance of SiO x |Ir and TiO x |Ir thin film electrodes towards the oxygen evolution reaction (OER) and Fe(II)/Fe(III) redox reactions were evaluated. An improvement in selectivity towards the OER was observed for all OECs. Overlayer properties, namely ionic and electronic conductivity, were assessed using a combination of electroanalytical methods and molecular dynamics simulations. SiO x and TiO x overlayers were found to be permeable to H 2 O and O 2 such that the OER can occur at the MO x |Ir (M = Ti, Si) buried interface, which was further supported with molecular dynamics simulations of model SiO 2 coatings. In contrast, Fe(II)/Fe(III) redox reactions occur to the same degree with TiO x overlayers having thicknesses less than 4 nm as bare electrocatalyst, while SiO x overlayers inhibit redox reactions at all thicknesses. This observation is attributed to differences in electronic transport between the buried interface and outer overlayer surface, as measured with through-plane conductivity measurements of wetted overlayer materials. These findings reveal the influence of oxide overlayer properties on the activity and selectivity of OECs and suggest opportunities to tune these properties for a wide range of electrochemical reactions.

08 HYDROGEN↗
DOE OSTI2020

Polymer Entrapment Flash Pyrolysis for the Preparation of Nanoscale Iridium-Free Oxygen Evolution Electrocatalysts

This paper describes the use of a new polymer entrapment flash pyrolysis (PEFP) method for making nanoscale yttrium ruthenate (Y 2 Ru 2 O 7-δ ) electrocatalysts. Here, this approach effectively reduced the synthesis temperature of phase-pure pyrochlore catalysts from 1000 °C to 550 °C, and greatly suppressed the sintering of catalyst particles. The supported nanocrystalline Y 2 Ru 2 O 7-δ catalysts showed enhanced activity towards oxygen evolution reaction (OER) in acidic electrolyte and were stable at 1.50 V for the comparative study (>20 h) under the current density of 10 mA/cm 2 geo in chronopotentiometry testing. This is equivalent to an overpotential value of 270 mV, about half of that of the reference IrO 2 catalyst. X-ray absorption spectroscopy (XAS) and transmission electron microscopy (TEM) analysis showed that the high-surface-area Y 2 Ru 2 O 7-δ catalyst had an oxygen-deficient structure. This study provides a route to the synthesis of fine ceramic (or oxide)-based electrocatalysts for making high-performing electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Acid–Base Chemistry of a Model IrO 2 Catalytic Interface

Iridium oxide (IrO 2 ) is one of the most efficient catalytic materials for the oxygen evolution reaction (OER), yet the atomic scale structure of its aqueous interface is largely unknown. Herein, the hydration structure, proton transfer mechanisms and acid-base properties of the rutile IrO 2 (110)-water interface are investigated using ab-initio based deep neural-network potentials and enhanced sampling simulations. The proton affinities of the different surface sites are characterized by calculating their acid dissociation constants, which yield a point of zero-charge in good agreement with experiments. A large fraction (≈ 80%) of adsorbed water dissociation is observed, together with a short lifetime (≈ 0.5 ns) of the resulting terminal hydroxy groups, due to rapid proton exchanges between adsorbed H 2 O and adjacent OH species. As a result, this rapid surface proton transfer supports the suggestion that the rate-determining step in the OER may not involve proton transfer across the double layer into solution, as indicated by recent experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Time of Flight Secondary Ion Mass Spectrometry for Characterization of Pt-Coated Porous Transport Layers in PEM Water Electrolyzers

Titanium-based porous transport layers (PTLs) and iridium-based catalyst layers (CLs) are two main components of proton exchange membrane water electrolyzers (PEMWEs). PTLs are typically coated with platinum to minimize interfacial losses and to support long-term operation. Optimizing coatings and the PTL-CL interface requires comprehensive characterization. This study establishes time-of-flight secondary ion mass spectrometry (ToF-SIMS) as a valuable technique for PTL characterization, addressing capabilities and limitations related to PTL morphology. A methodology was developed that uses a Cs + sputter beam for dynamic depth profiling, with data collected in both positive-ion (MCs + ) and negative-ion modes to generate depth profiles, 2D ion maps, and 3D ion reconstructions. ToF-SIMS detected relative differences in platinum-layer thickness between samples; these trends were validated by cross-sectional scanning transmission electron microscope (STEM) measurements and flat-titanium substrate controls. Interfacial oxide layers are identified in both ion modes, with enhanced oxide sensitivity in negative mode. The technique’s high sensitivity enables detection of nanometer-scale coatings and trace impurities within the bulk PTL structure. These results provide a methodological framework for analyzing Pt-coated PTLs, with the potential to extend to other components in PEMWEs and other electrolyzer systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural and electronic properties of the first iridium containing mixed B-site spinel oxide: Cu [ Ir 1.5 Cu 0.5 ] O 4

Geometrically frustrated systems populated with large spin-orbit coupled ions are an ideal setting for the exploration of novel exotic states of matter. In this study we present an example of iridium on a mixed B-site spinel oxide structure: Cu [ Ir 1.498 ( 2 ) Cu 0.502 ( 2 ) ] O 4 . Synchrotron XRD refinements reveal a face-centered-cubic structure with space group F d 3 ¯ m and mixed Cu-Ir site disorder within the B 2 O 4 rocksalt substructure. Electrical properties reveal a metallic state within the 50–600-K range with a Kondo effect at T < 50 K . X-ray absorption spectroscopy (XAS) measurements show a mixed Cu 1 + / 2 + and Ir 3 + / 4 + charge partitioned picture, which suggests a metallic/band description with reduced on-site Coulomb interactions. Spin-glass-like freezing is seen at T g = 49 K , and the hysteresis behavior for T > T g resembles that of a strongly frustrated magnet. DFT calculations show sizable hybridization between the Cu 3 d and Ir 5 d states with an effective mixed Ir 3 + / 4 + charge partitioned picture, supporting the electronic and XAS results.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultrahigh Oxygen Evolution Reaction Activity Achieved Using Ir Single Atoms on Amorphous CoO x Nanosheets

Developing efficient electrocatalysts for an oxygen evolution reaction (OER) is important for renewable energy storage. Here, we design high-density Ir single-atom catalysts supported by CoO x amorphous nanosheets (ANSs) for the OER. Experimental results show that Ir single atoms are anchored by abundant surface-absorbed O in CoO x ANSs. Ir single-atom catalysts possess ultrahigh mass activity that is 160-fold of commercial IrO 2 . The OER of IrCoO x ANSs reached a record low onset overpotential of less than 30 mV. In situ X-ray absorption spectroscopy reveals that Ir-O-Co pairs directly boosted the OER efficiency and enhanced the Ir stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗