Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface Passivation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Kinetic Suppression of Photoinduced Halide Migration in Wide Bandgap Perovskites via Surface Passivation

In this work, we study the kinetics of photoinduced halide migration in FA 0.8 Cs 0.2 Pb(I 0.8 Br 0.2 ) 3 wide (~1.69 eV) bandgap perovskites and show that halide migration slows down following surface passivation with (3-aminopropyl) trimethoxysilane (APTMS). We use scanning Kelvin probe microscopy (SKPM) to probe the contact potential difference (CPD) shift under illumination and the kinetics of surface potential relaxation in the dark. Our results show that APTMS-passivated perovskites exhibit a smaller CPD shift under illumination and a slower surface potential relaxation in the dark. We compare the evolution of the photoluminescence spectra of APTMS-passivated and unpassivated perovskites under illumination. We find that APTMS-passivated perovskites exhibit more than 5 times slower photoluminescence red-shift, consistent with the slower surface potential relaxation as observed by SKPM. In conclusion, these observations provide evidence for kinetic suppression of photoinduced halide migration in APTMS-passivated samples, likely due to reduced halide vacancy densities, opening avenues to more efficient and stable devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Critical Influence of Spin–Dry Technique on the Surface Passivation Quality of Crystalline Silicon Solar Cell Structures

This study examines the effects of spin-dry (SD) and N 2 blow-dry (ND) techniques on the quality and surface passivation performance of silicon oxide grown in ozone-dissolved deionized water. The SD method achieves greater oxide thickness uniformity, averaging 1.39 nm ± 4.17% across 49 points, compared to 1.68 nm ± 21.67% for the ND wafers. However, persistently poor passivation of ozonated oxide-grown wafers following the SD process is exhibited, with carrier lifetime, τ eff < 0.3 ms and saturation current density, J 0 (per side) ranging from 26 to 45 fA cm 2 . These findings are analyzed in the context of the fundamental phenomena involved in the drying processes of both techniques. Following this, an optimized spin-drying process is developed, resulting in improved τ eff and J 0 values of 1.4 ms and 5.6 fA cm –2 , respectively. Scanning electron microscopy further confirms that the oxide films dried with the enhanced SD technique are free of pinholes.

14 SOLAR ENERGY↗
DOE OSTI2020

Surface Passivation by Excess Sulfur for Controlled Synthesis of Large, Thin SnS Flakes

Tin sulfide (SnS) is part of the group IV chalcogenides (SnX, GeX; X: S, Se), a family of anisotropic layered materials considered for thin film photovoltaics, optoelectronics, and valleytronics, and predicted narrow bandgap multiferroic materials. Large ultrathin SnS flakes, suitable for a variety of applications, are challenging to synthesize because of the enhanced surface reactivity due to the open layer structure of SnS which gives rise to a competition between lateral and vertical growth. Here we investigate the effects of added sulfur on passivating the surface and modifying the balance between lateral expansion and thickening of SnS flakes in chemical vapor transport from a SnS precursor. In addition, we investigate the growth of SnS flakes and compare the results of synthesis from a pure SnS precursor with growth, in which a slight excess of sulfur is supplied in different ways. Our results demonstrate that small amounts of excess sulfur can profoundly affect the size and thickness distributions of SnS flakes. The largest and thinnest flakes are obtained if (i) traces of sulfur are added and (ii) the sulfur source consists either of small Sx fragments released at high temperatures from the reactor walls, or atomic S supplied by sublimation from SnS 2 . The likely mechanism for the observed growth modifications is a transient surface passivation of SnS flakes during growth, which reduces the reactivity of the top facet of the flakes, limits vertical growth, and thus gives rise to ensembles with increased lateral size and reduced thickness.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Wide-Gap Perovskite via Synergetic Surface Passivation and Its Application toward Efficient Stacked Tandem Photovoltaics

Superior bandgap tunability enables solution-processed halide perovskite a promising candidate for multi-junction photovoltaics (PVs). Particularly, optically coupling wide-gap perovskite by stacking with commercially available PVs such as silicon and CIGS (also known as 4-terminal tandem) simplifies the technology transfer process, and further advances the commercialization potential of perovskite technology. However, compared with matured PV materials and the phase-pure FAPbI 3 , wide-gap perovskite still suffers from huge voltage deficits. Here, the authors take advantage of the synergetic effect behind a sequential fluoride and organic ammonium salt surface passivation strategy to control non-radiative energy losses, and obtained a 17.7% efficiency in infrared-transparent wide-gap perovskite solar cells (21.1% for opaque device), and achieved efficiencies of over 25% when stacked with commercial Si and CIGS products with original PCEs of 18–20% under a 4-terminal working condition.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Acceleration of Near-IR Emission through Efficient Surface Passivation in Cd 3 P 2 Quantum Dots

Fast near-IR (NIR) emitters are highly valuable in telecommunications and biological imaging. The most established NIR emitters are epitaxially grown In x Ga 1-x As quantum dots (QDs), but epitaxial growth has several disadvantages. Colloidal synthesis is a viable alternative that produces a few NIR-emitting materials, but they suffer from long photoluminescence (PL) times. These long PL times are intrinsic in some NIR materials (PbS, PbSe) but are attributed to emission from bright trapped carrier states in others. We show that Cd 3 P 2 QDs possess substantial trap emission with radiative times >10 1 ns. Surface passivation through shell growth or coordination of Lewis acids is shown to accelerate the NIR emission from Cd 3 P 2 QDs by decreasing the amount of trap emission. This finding brings us one step closer to the application of colloidally synthesized QDs as quantum emitters.

36 MATERIALS SCIENCE↗
DOE OSTI2023

New value of old knowledge: sulphur-based GaAs surface passivation and potential GaAs application in molecular electronics and spintronics

GaAs is well known for its extremely high electron mobility and direct band gap. Owing to the technological advances in silicon-based technology, GaAs has been limited to niche areas. This paper discusses the application of GaAs in molecular electronics and spintronics as a potential field for considering this amazing but challenging material. GaAs is challenging because its surface is characterized by a high density of surface states, which precludes the utilization of this semiconducting material in mainstream devices. Sulfur(S)-based passivation has been found to be significantly useful for reducing the effect of dangling bonds and was researched thoroughly. GaAs applications in molecular spintronics and electronics can benefit significantly from prior knowledge of GaAs and S interactions because S is a popular functional group for bonding molecular device elements with different semiconductors and metals. In this article, the problem associated with the GaAs surface is discussed in a tutorial form. A wide variety of surface passivation methods has been briefly introduced. We attempted to highlight the significant differences in the S-GaAs interactions for different S passivation methods. We also elaborate on the mechanisms and atomic-scale understanding of the variation in surface chemistry and reconstruction due to various S passivation methods. It is envisioned that GaAs and thiol-terminated molecule-based novel devices can exhibit innovative device characteristics and bring the added advantage of S-based passivation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nanoparticle Surface Passivation Strategies to Improve the Cycle and Calendar Lifetime of Silicon Anodes in Standard Carbonate Electrolytes

Silicon Lithium alloys (SiLix) as the anode active material in a Li-Ion battery configuration offer possible energy densities paralleled only by pure lithium metal. However, the extreme mechanical deformation of alloying and dealloying SiLix through charge/discharge cycles paired with the highly reactive interface of SiLix which generates an interfacial layer known as the solid-electrolyte-interphase are large barriers to industrial adoption of high-silicon-content negative electrodes. Moreover, these challenges are magnified when the thickness of the electrode is brought to relevant levels (>3 mg/cm2). Here, I describe our efforts to address these challenges by utilizing single-nanometer-scale silicon nanoparticles to reduce capacity fade related to mechanical failure. I also detail our efforts to modify the silicon surface through interfacial chemical engineering strategies to passivate the silicon surface. This development three different majority silicon electrodes (50-74 wt%) to achieve cycle capacity retention of greater than 73% through 1000 charge/discharge cycles against capacity-matched NMC-based cathodes and calendar lifetimes greater than one year. This research is a part of the multi-national lab Silicon Consortium Project.

anodes↗
DOE OSTI2020

Sub-micrometer random-pyramid texturing of silicon solar wafers with excellent surface passivation and low reflectance

Select emerging solar cell technologies, ranging from very narrow screen-printed fingers to perovskite/silicon tandems, would benefit from a reduction of the height of the standard pyramidal texture of monocrystalline silicon wafers to below 1 μm. However, fabricating such small surface features usually compromises the requisite low reflectance and high passivation quality. Through systematic design of experiments, we demonstrate that conventional alkaline-based wet-chemical etching processes can be tuned to produce dense, spatially homogeneous, and uniformly sized sub-micrometer pyramids. Precise texture size can be further controlled by adding potassium silicate to the texturing solution to effectively slow the pyramid growth rate and promote nucleation. With pyramid size distribution data—extracted from multiple atomic force microscopy images across each wafer—we demonstrate 16 nanotextures with average pyramid sizes ranging from 62 to 512 nm, with the largest having only 0.3% of its pyramids taller than 1 μm. Six of the nanotextures exhibit light trapping and surface defect densities comparable to state-of-the-art microtextured wafers. In conclusion, the best nanotexture achieved an AM1.5G-weighted reflectance of 11.8% and a minority-carrier lifetime of 3.4 ms after passivation with amorphous silicon, demonstrating that smaller textures need not deteriorate solar cell performance.

14 SOLAR ENERGY↗
DOE OSTI2026

Electrochemical quantification of phosphonic acid passivated surface sites of NiO x for perovskite solar cells

Nickel oxide (NiO x ) is among the few p-type metal oxide semiconductors considered a strong candidate for hole transport layers in halide perovskite solar cells (PSCs). However, its reactivity with perovskite ions poses significant challenges to achieving high efficiency and long-term stability. Here, we investigate passivation of detrimental reactive surface sites on NiO x by carbazole phosphonic acids. We leverage electrochemical cyclic voltammetry (CV) of NiO x electrodes as a proxy measure for the redox activity that afflicts PSCs. From the CVs, we derive a metric, N (units cm −2 ), that relates to the number of redox active sites on NiO x surfaces. We observe a statistically significant negative correlation between PSC efficiency and N-value that indicates PSCs are more efficient on NiO x with lower electrochemical reactivity. The new mechanistic insight into NiO x passivation demonstrates it requires a reducing agent and Brønsted acid combination, providing a broadly applicable approach for evaluating and enhancing the stability and performance of NiO x -based interfaces in photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2024

Intergranular corrosion of Ni-30Cr in high-temperature hydrogenated water after removing surface passivating film

Abstract High-resolution transmission electron microscopy and atom probe tomography are used to characterize the initial passivation and subsequent intergranular corrosion of degraded grain boundaries in a model Ni-30Cr alloy exposed to 360 °C hydrogenated water. Upon initial exposure for 1000 h, the alloy surface directly above the grain boundary forms a thin passivating film of Cr 2 O 3 , protecting the underlying grain boundary from intergranular corrosion. However, the metal grain boundary experiences severe Cr depletion and grain boundary migration during this initial exposure. To understand how Cr depletion affects further corrosion, the local protective film was sputtered away using a glancing angle focused ion beam. Upon further exposure, the surface fails to repassivate, and intergranular corrosion is observed through the Cr-depleted region. Through this combination of high-resolution microscopy and localized passive film removal, we show that, although high-Cr alloys are resistant to intergranular attack and stress corrosion cracking, degradation-induced changes in the underlying metal at grain boundaries make the material more susceptible once the initial passive film is breached.

(S)TEM↗
DOE OSTI2021

Room temperature plasma-etching and surface passivation of far-ultraviolet Al mirrors using electron beam generated plasmas

The development of optical systems operating in the far ultraviolet range (FUV, λ=100-200 nm) is limited by the efficiency of passivated aluminum (Al) mirrors. Although it is presently possible to obtain high-reflectivity FUV mirrors through physical vapor deposition, the process involves deposition with substrates at high temperatures, which is technically challenging for large optical elements. A novel passivation procedure for bare Al mirrors is reported. The treatment consisted of using a low-temperature electron-beam generated plasma produced in a gas mixture of Ar and SF6 to etch away the native oxide layer from the Al film, while simultaneously promoting the generation of a thin aluminum tri-fluoride (AlF3) layer on the Al surface. In the first section we analyze the effect of varying both ion energy and SF6 concentration on the FUV reflectance, thickness, composition, and surface morphology of the resulting AlF3 protective layers. In the second section, the reflectivity of samples is optimized at selected important FUV wavelengths for astronomical observations. Notably, samples attained state-of-the-art reflectances of 75% at 108.5 nm (He Lyman γ), 91% at 121.6 nm (H Lyman α), 90% at 130.4 nm (OI), and of 95% at 155.0 nm (C IV). The stability over time of these passivated mirrors is also investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Development of electronically passivating surfaces to enhance battery performance

For many decades, lithium metal batteries (LMBs) have been studied for their high energy density, though they suffer from high reactivity, which safety concerns such as explosions and fires. These events can occur as a result of degradation due to redox reactions and lithium morphology that evolve during cycling. Mostly, the failure is caused by the electrolyte degradation leading to the creation of a solid electrolyte interphase (SEI), which tends to induce electron leakage, lithium dendrite growth, and capacity decay. SEI formation is practically inevitable. This work investigated the minimization of degradation events by modifying different battery configurations. Modifications were made by exchanging electrolytes, electrode surfaces, and even annexing innovative components. Our goal is to achieve a configuration where Li-ion transfer is facilitated, and electron transfer is limited which would enable a longer lithium metal battery life cycle. When performing these modifications and testing their electrochemical performance, a current reduction was observed when the electrodes were spontaneously coated with preformed SEI. Herein several classes of artificial SEI layers are explored for their ability to form passivating layers through use of a redox active molecule.

25 ENERGY STORAGE↗
DOE OSTI2020

Transient Lattice Response upon Photoexcitation in CuInSe 2 Nanocrystals with Organic or Inorganic Surface Passivation

CuInSe 2 nanocrystals offer promise for optoelectronics including thin-film photovoltaics and printed electronics. Additive manufacturing methods such as photonic curing controllably sinter particles into quasi-continuous films and offer improved device performance. To gain understanding of nanocrystal response under such processing conditions, we investigate impacts of photoexcitation on colloidal nanocrystal lattices via time-resolved X-ray diffraction. We probe three sizes of particles and two capping ligands (oleylamine and inorganic S 2- ) to evaluate resultant crystal lattice temperature, phase stability, and thermal dissipation. Elevated fluences produce heating and loss of crystallinity, the onset of which exhibits particle size dependence. We find size-dependent recrystallization and cooling lifetimes ranging from 90 to 200 ps with additional slower cooling on the nanosecond time scale. Sulfide-capped nanocrystals show faster recrystallization and cooling compared to oleylamine-capped nanocrystals. Using these lifetimes, we find interfacial thermal conductivities from 3 to 28 MW/(m 2 K), demonstrating that ligand identity strongly influences thermal dissipation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗