Search NASA⌕ Search

SEARCH · Search NASA

Results for “Synthetic Image Generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Spacecraft on-board SAR image generation for EOS-type missions

Spacecraft on-board synthetic aperture radar (SAR) image generation is an extremely difficult problem because of the requirements for high computational rates (usually on the order of Giga-operations per second), high reliability (some missions last up to 10 years), and low power dissipation and mass (typically less than 500 watts and 100 Kilograms). Recently, a JPL study was performed to assess the feasibility of on-board SAR image generation for EOS-type missions. This paper summarizes the results of that study. Specifically, it proposes a processor architecture using a VLSI time-domain parallel array for azimuth correlation. Using available space qualifiable technology to implement the proposed architecture, an on-board SAR processor having acceptable power and mass characteristics appears feasible for EOS-type applications.

Liu, K. Y.↗
NASA NTRS1981

Evaluation of the soil moisture prediction accuracy of a space radar using simulation techniques

Image simulation techniques were employed to generate synthetic aperture radar images of a 17.7 km x 19.3 km test site located east of Lawrence, Kansas. The simulations were performed for a space SAR at an orbital altitude of 600 km, with the following sensor parameters: frequency = 4.75 GHz, polarization = HH, and angle of incidence range = 7 deg to 22 deg from nadir. Three sets of images were produced corresponding to three different spatial resolutions; 20 m x 20 m with 12 looks, 100 m x 100 m with 23 looks, and 1 km x 1 km with 1000 looks. Each set consisted of images for four different soil moisture distributions across the test site. Results indicate that, for the agricultural portion of the test site, the soil moisture in about 90% of the pixels can be predicted with an accuracy of = + or - 20% of field capacity. Among the three spatial resolutions, the 1 km x 1 km resolution gave the best results for most cases, however, for very dry soil conditions, the 100 m x 100 m resolution was slightly superior.

Ulaby, F. T.↗
NASA NTRS1991

Cometary activity, discrete outgassing areas, and dust-jet formation

Conceptual models for various types of features observed in cometary comae (jets, spirals, halos, fans, etc.), their computer simulation, and the hydrodynamic models for jet formation are critically reviewed, and evidence for anisotropic, strongly collimated flows of ejecta emanating from discrete active regions (vents) on the rotating cometary nuclei is presented. Techniques employed to generate synthetic comet images that simulate the features observed are described, and their relevance to the primary objects of coma-morphology studies is discussed. Modeling of temporal variations in the water emission from discrete active regions suggests that production curves asymmetric with respect to perihelion should be commonplace. Critical comparisons with the activity profiles of Enke's comet and with light curves of disappearing comets and comets that undergo outbursts are presented. Recent developments in the understanding of the processes that cause the nongravitational perturbations of cometary motions are reviewed, and the observed discontinuities are identified with the birth of new sources and/or deactivation of old vents.

Sekanina, Z.↗
NASA NTRS2004

Discovering Planetary Nebula Geometries: Explorations with a Hierarchy of Models

Astronomical objects known as planetary nebulae (PNe) consist of a shell of gas expelled by an aging medium-sized star as it makes its transition from a red giant to a white dwarf. In many cases this gas shell can be approximately described as a prolate ellipsoid. Knowledge of the physics of ionization processes in this gaseous shell enables us to construct a model in three dimensions (3D) called the Ionization-Bounded Prolate Ellipsoidal Shell model (IBPES model). Using this model we can generate synthetic nebular images, which can be used in conjunction with Hubble Space Telescope (HST) images of actual PNe to perform Bayesian model estimation. Since the IBPES model is characterized by thirteen parameters, model estimation requires the search of a 13-dimensional parameter space. The 'curse of dimensionality,' compounded by a computationally intense forward problem, makes forward searches extremely time-consuming and frequently causes them to become trapped in local solutions. We find that both the speed and of the search can be improved by judiciously reducing the dimensionality of the search space. Our basic approach employs a hierarchy of models of increasing complexity that converges to the IBPES model. Earlier studies establish that a hierarchical sequence converges more quickly, and to a better solution, than a search relying only on the most complex model. Here we report results for a hierarchy of five models. The first three models treat the nebula as a 2D image, while the last two models explore its characteristics as a 3D object and enable us to characterize the physics of the nebula. This five-model hierarchy is applied to HST images of ellipsoidal PNe to estimate their geometric properties and gas density profiles.

Huyser, Karen A.↗
NASA NTRS1992

Geometric ortho-rectification and generation of sigma(0) image products from multiple incidence synthetic aperture radar images

The results of the first phase of a cooperative effort in geometric orthorectification and generation of sigma(0) images of multiple incidence SAR images are presented. The geometric accuracy of the final image products is approximately 18 m or 1.5 pixels. A method for registering radar imagery collected from an airborne platform to an existing digital elevation model despite the effects of unmodeled variations in the flight path of the platform is demonstrated. The results indicate the requirements for a more detailed digital elevation model.

Curlander, James↗
NASA NTRS1991

Three dimensional scattering center imaging techniques

Two methods to image scattering centers in 3-D are presented. The first method uses 2-D images generated from Inverse Synthetic Aperture Radar (ISAR) measurements taken by two vertically offset antennas. This technique is shown to provide accurate 3-D imaging capability which can be added to an existing ISAR measurement system, requiring only the addition of a second antenna. The second technique uses target impulse responses generated from wideband radar measurements from three slightly different offset antennas. This technique is shown to identify the dominant scattering centers on a target in nearly real time. The number of measurements required to image a target using this technique is very small relative to traditional imaging techniques.

Younger, P. R.↗
NASA NTRS1987

Data volume reduction for imaging radar polarimetry

Two data reduction algorithms developed using the scattering and phase matrix approaches are described. In the scattering matrix approach, the scattering matrices of four consecutive along-track pixels are averaged and in the phase matrix approach, the phase matrices of four consecutive along-track pixels are averaged. The basic procedures necessary to generate a synthetic polarization image from original data sets are discussed. The two algorithms are evaluated in terms of data volume reduction and the number of errors introduced in the synthesized images. It is observed that the reduced data set produced by the scattering matrix algorithm is smaller than that generated by the phase matrix algorithm; however, greater errors are introduced into the data set by the scattering matrix algorithm than the phase algorithm. Flowcharts for the scattering and phase matrix approaches and for synthesis of uncompressible data are presented.

Dubois, Pascale C.↗
DOE OSTI2025

Analysis of streaked images of x-ray self-emission in laser-driven spherical implosions

Imaging of x-ray self-emission provides a powerful in situ measurement of the spatial and temporal evolution of high-energy-density plasmas. However, interpretation of these measurements requires detailed understanding of the data-generating process. This work presents a case study in the interpretation of x-ray self-emission data for the specific application of streaked one-dimensional slit imaging of spherical laser-driven implosions. A comprehensive generative model of the streaked slit-imaging diagnostic is developed including detailed treatments of the radiation transfer, photometrics, and photostatistics associated with the measurement. The model is used to generate realistic synthetic streaked images and to analyze experimental streaked images to extract important physical quantities of interest. An example analysis of streaked images from implosion experiments on the OMEGA laser is presented, where the model developed in this work is used to constrain the trajectory and peak velocity of the implosion using Bayesian inference.

Bayesian inference↗
NASA NTRS1988

Data volume reduction for imaging radar polarimetry

Two alternative methods are presented for digital reduction of synthetic aperture multipolarized radar data using scattering matrices, or using Stokes matrices, of four consecutive along-track pixels to produce averaged data for generating a synthetic polarization image.

Zebker, Howard A.↗
NASA NTRS1989

Data volume reduction for imaging radar polarimetry

Two alternative methods are disclosed for digital reduction of synthetic aperture multipolarized radar data using scattering matrices, or using Stokes matrices, of four consecutive along-track pixels to produce averaged data for generating a synthetic polarization image.

Zebker, Howard A.↗
NASA NTRS2011

Constraining the Absolute Orientation of eta Carinae's Binary Orbit: A 3-D Dynamical Model for the Broad [Fe III] Emission

We present a three-dimensional (3-D) dynamical model for the broad [Fe III] emission observed in Eta Carinae using the Hubble Space Telescope/Space Telescope Imaging Spectrograph (HST/STIS). This model is based on full 3-D Smoothed Particle Hydrodynamics (SPH) simulations of Eta Car's binary colliding winds. Radiative transfer codes are used to generate synthetic spectro-images of [Fe III] emission line structures at various observed orbital phases and STIS slit position angles (PAs). Through a parameter study that varies the orbital inclination i, the PA(theta) that the orbital plane projection of the line-of-sight makes with the apastron side of the semi-major axis, and the PA on the sky of the orbital axis, we are able, for the first time, to tightly constrain the absolute 3-D orientation of the binary orbit. To simultaneously reproduce the blue-shifted emission arcs observed at orbital phase 0.976, STIS slit PA = +38deg, and the temporal variations in emission seen at negative slit PAs, the binary needs to have an i approx. = 130deg to 145deg, Theta approx. = -15deg to +30deg, and an orbital axis projected on the sky at a P A approx. = 302deg to 327deg east of north. This represents a system with an orbital axis that is closely aligned with the inferred polar axis of the Homunculus nebula, in 3-D. The companion star, Eta(sub B), thus orbits clockwise on the sky and is on the observer's side of the system at apastron. This orientation has important implications for theories for the formation of the Homunculus and helps lay the groundwork for orbital modeling to determine the stellar masses.

Madura, T. I.↗
DOE OSTI2024

DENNIS: a design and analysis tool for dynamic material x-ray diffraction experiments

We present DENNIS (Diffraction Experiment desigN and aNalysiS): a graphical software tool useful for the design and analysis of dynamic x-ray diffraction experiments, such as those performed on the Z Pulsed Power Facility, Thor Pulsed Power Generator, and Dynamic Compression Sector (DCS) of the Advanced Photon Source. DENNIS provides rapid powder and single-crystal diffraction pattern predictions and powder diffraction pattern image integration in three-dimensional geometries. Additional features include crystallographic information file reading, image processing, and synthetic diffraction pattern image generation. We overview the software's capabilities, detail the prediction and integration methodologies, and provide example implementations on Z and DCS experiments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Synthetic data-driven deep learning for label-free autonomous atomic force microscopy

Atomic force microscopy (AFM) is a widely used tool for nanoscale characterization across materials science, energy research, and biology. However, its adoption in high-throughput materials discovery and statistically driven studies remains limited by a strong dependence on expert operator input and by the scarcity of annotated experimental AFM datasets needed to enable data-driven automation. Here, we introduce SimuScan, a synthetic-data–driven framework that enables reliable AFM feature identification, segmentation, and targeted imaging without requiring large manually labeled experimental datasets. SimuScan generates tunable, high-fidelity synthetic AFM images of defined morphologies while incorporating realistic experimental artifacts, including tip–sample convolution, noise, flattening distortions, and surface debris. These datasets are shown to support scalable, label-free training of modern deep learning models for AFM analysis. When integrated into data-driven AFM workflows, SimuScan-trained models can locate and analyze nanoscale structures across large datasets and guide targeted follow-up imaging. We validate this approach on nanostructured surfaces, DNA assemblies, and bacterial cells, demonstrating robust generalization across diverse sample types with minimal operator intervention. More broadly, this work establishes a general strategy for generating explicitly conditioned, task-relevant synthetic data to improve the reliability of downstream models in autonomous microscopy.

Millan-Solsona, Ruben [Oak Ridge National Laborato↗
NASA NTRS1990

Fractal image analysis - Application to the topography of Oregon and synthetic images.

Digitized topography for the state of Oregon has been used to obtain maps of fractal dimension and roughness amplitude. The roughness amplitude correlates well with variations in relief and is a promising parameter for the quantitative classification of landforms. The spatial variations in fractal dimension are low and show no clear correlation with different tectonic settings. For Oregon the mean fractal dimension from a two-dimensional spectral analysis is D = 2.586, and for a one-dimensional spectral analysis the mean fractal dimension is D = 1.487, which is close to the Brown noise value D = 1.5. Synthetic two-dimensional images have also been generated for a range of D values. For D = 2.6, the synthetic image has a mean one-dimensional spectral fractal dimension D = 1.58, which is consistent with the results for Oregon. This approach can be easily applied to any digitzed image that obeys fractal statistics.

Huang, Jie↗
NASA NTRS2009

Wrap-Around Out-the-Window Sensor Fusion System

The Advanced Cockpit Evaluation System (ACES) includes communication, computing, and display subsystems, mounted in a van, that synthesize out-the-window views to approximate the views of the outside world as it would be seen from the cockpit of a crewed spacecraft, aircraft, or remote control of a ground vehicle or UAV (unmanned aerial vehicle). The system includes five flat-panel display units arranged approximately in a semicircle around an operator, like cockpit windows. The scene displayed on each panel represents the view through the corresponding cockpit window. Each display unit is driven by a personal computer equipped with a video-capture card that accepts live input from any of a variety of sensors (typically, visible and/or infrared video cameras). Software running in the computers blends the live video images with synthetic images that could be generated, for example, from heads-up-display outputs, waypoints, corridors, or from satellite photographs of the same geographic region. Data from a Global Positioning System receiver and an inertial navigation system aboard the remote vehicle are used by the ACES software to keep the synthetic and live views in registration. If the live image were to fail, the synthetic scenes could still be displayed to maintain situational awareness.

Fox, Jeffrey↗
DOE OSTI2026

An ultra-fast method for generating synthetic down-scattered neutron data for inertial confinement fusion implosions

In inertial confinement fusion experiments at the National Ignition Facility, asymmetries are probed by a variety of neutron diagnostics, including neutron imaging systems, real-time neutron activation diagnostics (RTNADs), and neutron spectrometers. It is often useful to generate synthetic data based on these diagnostics to validate and tune models. However, current methods of doing so using Monte Carlo particle tracing are time-consuming. In this paper, an ultra-fast method is presented for generating synthetic neutron images, RTNAD data, and spectrometry data using line integrals and 3D convolutions. While it does not contain as much physics as particle tracing codes, it is thousands of times faster and produces nearly identical data. This enables analysis techniques that depend on generating large amounts of synthetic data, which will prove very useful for the study of asymmetries going forward.

Deuterium↗
NASA NTRS1988

Simulation of ocean SAR images via phase history generation

A method for simulating an ocean synthetic-aperture radar (SAR) image is illustrated for a simple internal wave current pattern. The method calculates both the amplitude image and the radar signal history. The simulation model used consists of six stages. In the first stage, the full wave spectrum in two spatial coordinates is calculated from the wind speed and direction using the action spectral density equation. In the second stage, the pixel size is selected and used as the basis for dividing the spectrum into large and small scale motions. Realizations for the large-scale ocean surface height and velocity are then calculated. In the third stage, the sensor wavelength and geometry are used to calculate the small scale statistics (radar cross section, coherence time, root-mean square (RMS), radial velocity and RMS slope). In the fourth stage, an autoregressive method is used to generate a realization of the surface reflectivity history that is consistent with the radial velocity and the radial velocity variance. In the fifth stage, the signal history is generated by summing the reflectivities at the proper times with the appropriate antenna weighting function for the SAR. As a consequence of this process, speckle is automatically included in the signal. In the final stage, the SAR image can be created by using any of the traditional ways to process the signal history, including variable focusing and multilook processing.

Bennett, John R.↗
NASA NTRS1993

The Radar Image Generation (RIG) model

RIG is a modeling system which creates synthetic aperture radar (SAR) and inverse SAR images from 3-D faceted data bases. RIG is based on a physical optics model and includes the effects of multiple reflections. Both conducting and dielectric surfaces can be modeled; each surface is labeled with a material code which is an index into a data base of electromagnetic properties. The inputs to the program include the radar processing parameters, the target orientation, the sensor velocity, and (for inverse SAR) the target angle rates. The current version of RIG can be run on any workstation, however, it is not a real-time model. We are considering several approaches to enable the program to generate realtime radar imagery. In addition to its image generation function, RIG can also generate radar cross-section (RCS) plots as well as range and doppler radar return profiles.

Stenger, Anthony J.↗