Search NASA⌕ Search

SEARCH · Search NASA

Results for “TUNGSTATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Niobium hyperfine structure in crystal calcium tungstate

A study of the niobium hyperfine structure in single crystal calcium tungstate was made by the combination of the technique of electron paramagnetic resonance and electron nuclear double resonance (EPR/ENDOR). The microwave frequency was about 9.4 GHz and the radio frequency from 20MHz to 70 MHz. The rare earth ions Nd(3+), U(3+), or Tm(3+) were added as the charge compensator for Nb(5+). To create niobium paramagnetic centers, the sample was irradiated at 77 deg K with a 10 thousand curie Co-60 gamma source for 1 to 2 hours at a dose rate of 200 K rads per hour and then transferred quickly into the cavity. In a general direction of magnetic field, the spectra showed 4 sets of 10 main lines corresponding to 4 nonequivalent sites of niobium with I = 9/2. These 4 sets of lines coalesced into 2 sets of 10 in the ab-plane and into a single set of 10 along the c-axis. This symmetry suggested that the tungsten ions are substituted by the niobium ions in the crystal.

Tseng, D. L.↗
DOE OSTI2022

Robust hierarchical three dimensional nickel cobalt tungstate-MXene nanocomposite for high performance symmetric coin cell supercapacitors

Design of rational electrode materials with hierarchically structured pseudocapacitive materials has been identified as a successful strategy for revamping the electrochemical characteristics of supercapacitors. However, the simultaneous assurance of strong electrical conductivity and higher specific capacitance via a simple and cost-effective synthesis protocol is of concern today. In this work, Ni-CoWO 4 incorporated MXene nanocomposite has been successfully prepared by a facile hydrothermal process. The structure, morphology, stoichiometry, and chemical characterization of the prepared Ni-CoWO 4 , Ti 3 C 2 T x , and Ni-CoWO4@MXene nanocomposite were explored extensively. MXene demonstrated a layered 2D nanoscale structure whereas pure Ni-CoWO 4 was composed of spherical nanoparticles. The composite Ni-CoWO 4 @MXene revealed the morphology of spherical Ni-CoWO 4 nanoparticles decorated on MXene sheets. Furthermore, a series of electrochemical characterizations illustrated the contribution of the delightful morphology of Ni-CoWO 4 @MXene composite to excellent electrochemistry. The resultant Ni-CoWO 4 @MXene electrode exhibited high specific capacitance of 582 Fg -1 at 1 A g -1 and 93.5 % capacitance retention over the 10,000 cycles., which is higher than that of the individual counterparts Ni-CoWO 4 and MXene. The excellent electrochemical performance of Ni-CoWO 4 @MXene is attributed to the synergistic interaction between Ni-CoWO4 nanoparticles and nanolayered MXene that may create new active sites that enhanced the charge transfer, charge/discharge kinetics and the electrical conductivity. Significantly, the unique Ni-CoWO 4 @MXene supercapacitor prototype delivered a higher energy density of 85.7 Wh kg -1 and power density of 0.85 kW kg -1 establishing its superiority over other Cosingle bondW based supercapacitors. A theoretical study was also performed to correlate the improved charge storage capacity of the prepared Ni-CoWO 4 @MXene composite.

25 ENERGY STORAGE↗
DOE OSTI2020

Sodium tungstate-promoted CaMnO 3 as an effective, phase-transition redox catalyst for redox oxidative cracking of cyclohexane

Oxidative cracking, which combines catalytic oxidation and cracking reactions, represents a promising approach to reduce the energy and carbon intensities for light olefin production from naphtha. The need to co-feed gaseous oxygen with hydrocarbons, however, leads to significant CO x formation and safety concerns. The cost and energy consumption associated with air separation also affects its economic attractiveness. In this study, we investigated a redox oxidative cracking (ROC) scheme and evaluated perovskites (La 0.8 Sr 0.2 FeO 3 and CaMnO 3 ) and Na 2 WO 4 -promoted perovskite (La 0.8 Sr 0.2 FeO 3 @Na 2 WO 4 and CaMnO 3 @Na 2 WO 4 ) as the redox catalysts for ROC. CaMnO 3 @Na 2 WO 4 redox catalyst shows high activity, selectivity, and stability for light olefin production from cyclohexane. Operated under a redox oxidative cracking (ROC) scheme, CaMnO 3 @Na 2 WO 4 enhances the catalytic cracking of cyclohexane, while showing high selectivity towards hydrogen combustion with its built-in, active lattice oxygen. Over three-fold increase in olefin yield compared to thermal cracking and 35% yield increase compared to conventional O 2 -cofeed oxidative cracking were achieved. Low energy ion scattering (LEIS), X-ray photoelectric spectroscopy (XPS), and differential scanning calorimetry (DSC) indicated a core-shell structure, where a molten Na 2 WO 4 layer covers the CaMnO 3 core. Na 2 WO 4 modifies the oxygen donation behavior of CaMnO 3 and provides a catalytically active surface for cyclohexane activation. In-situ XRD revealed that CaMnO 3 @Na 2 WO 4 exhibited excellent structural stability and regenerability. The transformation of Mn 4+ ↔ Mn 3+ ↔ Mn 2+ in CaMnO 3 , facilitated by reversible phase transition to (Ca/Mn)O solid solution, is responsible for the lattice oxygen donation and uptake during redox cycles. Electrochemical impedance spectroscopy (EIS) measurements further confirmed that the oxygen species were transported through the molten Na 2 WO 4 layer to participate in ROC. These findings offer mechanistic insights to design effective redox catalysts for hydrocarbon valorization using the chemical looping strategy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Investigation of the photoluminescent properties, scintillation behaviour and toxicological profile of various magnesium tungstate nanoscale motifs

We have synthesized several morphologies and crystal structures of MgWO 4 using a one-pot hydrothermal method, producing not only monoclinic stars and large nanoparticles but also triclinic wool balls and sub-10 nm nanoparticles. Herein we describe the importance of reaction parameters in demonstrating morphology control of as-prepared MgWO 4 . Moreover, we correlate structure and composition with the resulting photoluminescence and radioluminescence properties. Specifically, triclinic-phase samples yielded a photoluminescence emission of 421 nm, whereas monoclinic-phase materials gave rise to an emission maximum of 515 nm. The corresponding radioluminescence data were characterized by a broad emission peak, located at 500 nm for all samples. Annealing the wool balls and sub-10 nm particles to transform the crystal structure from a triclinic to a monoclinic phase yielded a radioluminescence (RL) emission signal that was two orders of magnitude greater than that of their unannealed counterparts. Finally, to confirm the practical utility of these materials for biomedical applications, a series of sub-10 nm particles, including as-prepared and annealed samples, were functionalized with biocompatible PEG molecules, and subsequently were found to be readily taken up by various cell lines as well as primary cultured hippocampal neurons with low levels of toxicity, thereby highlighting for the first time the potential of this particular class of metal oxides as viable and readily generated platforms for a range of biomedical applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1972

Single crystals of selected titanates and tungstates

The compound preparation and crystal growth of a number of mixed titanate compositions was investigated. None of the compounds studied were found to melt congruently and therefore, crystal growth was extremely difficult. Various single crystal preparation methods always resulted in mixed phases from which 1-2 mm size crystals could be separated. It is concluded from this study that before successful single crystal growth can be accomplished, a detailed study of the phase diagrams in each of the systems of interest must be completed.

Loiacono, G. M.↗
DOE OSTI2022

Oxidation of Cyclopentene with Manganese Oxides Octahedral Molecular Sieves with Layer and Tunnel Structures

We report manganese oxides type octahedral molecular sieves OL-1, OMS-1, and OMS-2 were synthesized, impregnated with sodium tungstate, and evaluated as catalysts for the selective epoxidation of cyclopentene (CPE) to cyclopentene oxide (CPO) in the sodium bicarbonate/hydrogen peroxide (BAP) system. OL-1 was the best catalyst with a conversion of 78.6 % and a selectivity to CPO of 31.4 %. Impregnation with sodium tungstate affected the structure and activity of OL-1 and OMS-1. Mn 2+ is required for the epoxidation of CPE. FTIR spectra provides evidence that tungstate ions react, during impregnation, with Mg 2+ and/or Mn 2+ present in OMS-1 and OL-1 producing an amorphous compound that is not active in the epoxidation reaction. The crystalline and chemical structure of OMS-2 was not affected by tungstate impregnation, since most of the manganese occurs as Mn 3+ and Mn 4+ , which in presence of hydrogen peroxide, tend to form radicals, active in the total oxidation of organic compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Decoupling of catalysis and transition state analog binding from mutations throughout a phosphatase revealed by high-throughput enzymology

Using high-throughput microfluidic enzyme kinetics (HT-MEK), we measured over 9,000 inhibition curves detailing impacts of 1,004 single-site mutations throughout the alkaline phosphatase PafA on binding affinity for two transition state analogs (TSAs), vanadate and tungstate. As predicted by catalytic models invoking transition state complementary, mutations to active site and active-site-contacting residues had highly similar impacts on catalysis and TSA binding. Unexpectedly, most mutations to more distal residues that reduced catalysis had little or no impact on TSA binding and many even increased tungstate affinity. These disparate effects can be accounted for by a model in which distal mutations alter the enzyme’s conformational landscape, increasing the occupancy of microstates that are catalytically less effective but better able to accommodate larger transition state analogs. In support of this ensemble model, glycine substitutions (rather than valine) were more likely to increase tungstate affinity (but not more likely to impact catalysis), presumably due to increased conformational flexibility that allows previously disfavored microstates to increase in occupancy. These results indicate that residues throughout an enzyme provide specificity for the transition state and discriminate against analogs that are larger only by tenths of an Ångström. Thus, engineering enzymes that rival the most powerful natural enzymes will likely require consideration of distal residues that shape the enzyme’s conformational landscape and fine-tune active-site residues. Biologically, the evolution of extensive communication between the active site and remote residues to aid catalysis may have provided the foundation for allostery to make it a highly evolvable trait.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Scintillating glass for precision calorimetry in nuclear physics

High-performance scintillator materials are needed for particle identification and measurements of energy and momentum of electromagnetic particles in modern nuclear physics experiments. As an example, the US Electron-Ion Collider, a unique collider with diverse physics topics, requires electromagnetic calorimetry enabling high-quality electron identification and detection in the momentum range of 0.3 to tens of GeV. The highest resolution in electromagnetic calorimeters can be provided by homogeneous materials, e.g., lead tungstate crystals. Inorganic glass scintillators have been investigated as an attractive and cost-effective alternative to crystals, that is also easier and faster to manufacture in mass production. In this paper, we discuss progress in the fabrication and characterization of recent scintillating glass samples on both test bench and beam tests. Further, the results are well-reproduced by simulation and are discussed in the context of the Electron-Ion Collider experimental requirements and bench-marked against lead tungstate crystals.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1979

Thermionic cathode life-test studies

A NASA-Lewis Research Center program for life testing commercial, high-current-density thermionic cathodes has been in progress since 1971. The purpose of the program is to develop long-life power microwave tubes for space communications. Four commercial-type cathodes are being evaluated in this investigation. They are the 'Tungstate', 'S' type, 'B' type, and 'M' type cathodes, all of which are capable of delivering 1 A/ sq cm or more of emission current at an operating temperature in the range of 1000-1100 C. The life test vehicles used in these studies are similar in construction to that of a high-power microwave tube and employ a high-convergence electron-gun structure; in contrast to earlier studies that used close-space diodes. These guns were designed for operation at 2 A/sq cm of cathode loading. The 'Tungstate' cathodes failed at 700 h or less and the 'S' cathode exhibited a lifetime of about 20,000 h. One 'B' cathode has failed after 27,000 h, the remaining units continuing to operate after up to 30,000 h. Only limited data are now available for the 'M' cathode, because only one has been operated for as long as 19,000 h. However, the preliminary results indicate the emission current from the 'M' cathode is more stable than the 'B' cathode and that it can be operated at a true temperature approximately 100 C lower than for the 'B' cathode.

Forman, R.↗
NASA NTRS1983

Research study for gel precursors as glass and ceramic starting materials for space processing applications research

The development of techniques for the preparation of glass and ceramic starting materials that will result in homogeneous glasses or ceramic products when melted and cooled in a containerless environment is described. Metal-organic starting materials were used to make compounds or mixtures which were then decomposed by hydrolysis reactions to the corresponding oxides. The sodium tungstate system was chosen as a model for a glass with a relatively low melting temperature. The alkoxide tungstates also have interesting optical properties. For all the compositions studied, comparison samples were prepared from inorganic starting materials and submitted to the same analyses.

Downs, R. L.↗
NASA NTRS1991

Microanalysis of extended-test xenon hollow cathodes

Four hollow cathode electron sources were analyzed via boroscopy, scanning electron microscopy, energy dispersive x ray analysis, and x ray diffraction analysis. These techniques were used to develop a preliminary understanding of the chemistry of the devices that arise from contamination due to inadequate feed-system integrity and improper insert activation. Two hollow cathodes were operated in an ion thruster simulator at an emission current of 23.0 A for approximately 500 hrs. The two tests differed in propellant-feed systems, discharge power supplies, and activation procedures. Tungsten deposition and barium tungstate formation on the internal cathode surfaces occurred during the first test, which were believed to result from oxygen contamination of the propellant feed-system. Consequently, the test facility was upgraded to reduce contamination, and the test was repeated. The second hollow cathode was found to have experienced significantly less tungsten deposition. A second pair of cathodes examined were the discharge and the neutralizer hollow cathodes used in a life-test of a 30-cm ring-cusp ion thruster at a 5.5 kW power level. The cathodes' test history was documented and the post-test microanalyses are described. The most significant change resulting from the life-test was substantial tungsten deposition on the internal cathode surfaces, as well as removal of material from the insert surface. In addition, barium tungstate and molybdate were found on insert surfaces. As a result of the cathode examinations, procedures and approaches were proposed for improved discharge ignition and cathode longevity.

Verhey, Timothy R.↗
DOE OSTI2024

Novel 4x4 SiPM array readout with integrated preamplification stage, optimized for the PWO detectors of the EIC EEEMCal

Here we are reporting on a new readout circuit developed for the lead tungstate (PbWO4) scintillation detectors for the Electron Ion Collider (EIC) Electron Endcap Electromagnetic Calorimeter EEEMCal. The high magnetic field region precludes the use of photomultiplier tubes while the detector requirements specify good spectral resolution performance and fast pulse integration over a large dynamic range. We selected a silicon photomultiplier (SiPM) from Hamamatsu and produced a matrix of 4 x 4 sensors to cover the 20 mm x 20 mm scintillator coupling surface. Signal acquisition and amplification electronics boards were designed and integrated with the sensor board to produce a compact high performance readout package. A prototype detector was built and tested at Jefferson Lab with encouraging resolution and timing performance results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗