Search NASA⌕ Search

SEARCH · Search NASA

Results for “TURBULENT DIFFUSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Effects of turbulent diffusion and back-reaction on the dust distribution around two resonant planets

In evolved and dusty circumstellar discs, two planets with masses comparable to Jupiter and Saturn that migrate outwards while maintaining an orbital resonance can produce distinctive features in the dust distribution. Dust accumulates at the outer edge of the common gas gap, which behaves as a dust trap, where the local dust concentration is significantly enhanced by the planets’ outward motion. Concurrently, an expanding cavity forms in the dust distribution inside the planets’ orbits, because dust does not filter through the common gaseous gap and grain depletion in the region continues via inward drifting. There is no cavity in the gas distribution because gas can filter through the gap, although ongoing gas accretion on the planets can reduce the gas density in the inner disc. Such behaviour was demonstrated by means of simulations neglecting the effects of dust diffusion due to turbulence and of dust backreaction on the gas. Both effects may alter the formation of the dust peak at the gap outer edge and of the inner dust cavity, by letting grains filter through the dust trap. We performed high-resolution hydrodynamical simulations of the coupled evolution of gas and dust species, the latter treated as pressureless fluids, in the presence of two giant planets. We show that diffusion and backreaction can change some morphological aspects of the dust distribution but do not alter some main features, such as the outer peak and the expanding inner cavity. Furthermore, these findings are confirmed for different parametrizations of gas viscosity.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2001

Extinction and Scattering Properties of Soot Emitted from Buoyant Turbulent Diffusion Flames

Extinction and scattering properties at wavelengths of 250-5200 nm were studied for soot emitted from buoyant turbulent diffusion flames in the long residence time regime where soot properties are independent of position in the overfire region and characteristic flame residence times. Flames burning in still air and fueled with gas (acetylene, ethylene, propane, and propylene) and liquid (benzene, toluene, cyclohexane, and n-heptane) hydrocarbon fuels were considered Measured scattering patterns and ratios of total scattering/absorption cross sections were in good agreement with predictions based on the Rayleigh-Debye-Gans (RDG) scattering approximation in the visible. Measured depolarization ratios were roughly correlated by primary particle size parameter, suggesting potential for completing RDG methodology needed to make soot scattering predictions as well as providing a nonintrusive way to measure primary soot particle diameters. Measurements of dimensionless extinction coefficients were in good agreement with earlier measurements for similar soot populations and were independent of fuel type and wavelength except for reduced values as the near ultraviolet was approached. The ratios of the scattering/absorption refractive index functions were independent of fuel type within experimental uncertainties and were in good agreement with earlier measurements. The refractive index function for absorption was similarly independent of fuel type but was larger than earlier reflectometry measurements in the infrared. Ratios of total scattering/absorption cross sections were relatively large in the visible and near infrared, with maximum values as large as 0.9 and with values as large as 0.2 at 2000 nm, suggesting greater potential for scattering from soot particles to affect flame radiation properties than previously thought.

Krishnan, S. S.↗
NASA NTRS2001

Extinction and Scattering Properties of Soot Emitted from Buoyant Turbulent Diffusion Flames

Extinction and scattering properties at wavelengths of 250-5200 nm were studied for soot emitted from buoyant turbulent diffusion flames in the long residence time regime where soot properties are independent of position in the overfire region and characteristic flame residence times. Flames burning in still air and fueled with gas (acetylene, ethylene, propane, and propylene) and liquid (benzene, toluene, cyclohexane, and n-heptane) hydrocarbon fuels were considered. Measured scattering patterns and ratios of total scattering/absorption cross sections were in good agreement with predictions based on the Rayleigh-Debye-Gans (RDG) scattering approximation in the visible. Measured depolarization ratios were roughly correlated by primary particle size parameter, suggesting potential for completing RDG methodology needed to make soot scattering predictions as well as providing a nonintrusive way to measure primary soot particle diameters. Measurements of dimensionless extinction coefficients were in good agreement with earlier measurements for similar soot populations and were independent of fuel type and wavelength except for reduced values as the near ultraviolet was approached. The ratios of the scattering/absorption refractive index functions were independent of fuel type within experimental uncertainties and were in good agreement with earlier measurements. The refractive index junction for absorption was similarly independent of fuel type but was larger than earlier reflectometry measurements in the infrared. Ratios of total scattering/absorption cross sections were relatively large in the visible and near infrared, with maximum values as large as 0.9 and with values as large as 0.2 at 2000 nm, suggesting greater potential for scattering from soot particles to affect flame radiation properties than previously thought.

Krishnan, S. S.↗
NASA NTRS2003

Buoyancy Effects in Fully-Modulated, Turbulent Diffusion Flames

Pulsed combustion appears to have the potential to provide for rapid fuel/air mixing, compact and economical combustors, and reduced exhaust emissions. The objective of this experiment (PuFF, for Pulsed-Fully Flames) is to increase the fundamental understanding of the fuel/air mixing and combustion behavior of pulsed, turbulent diffusion flames by conducting experiments in microgravity. In this research the fuel jet is fully-modulated (i.e., completely shut off between pulses) by an externally controlled valve system. This gives rise to drastic modification of the combustion and flow characteristics of flames, leading to enhanced fuel/air mixing compared to acoustically excited or partially-modulated jets. Normal-gravity experiments suggest that the fully-modulated technique also has the potential for producing turbulent jet flames significantly more compact than steady flames with no increase in exhaust emissions. The technique also simplifies the combustion process by avoiding the acoustic forcing generally present in pulsed combustors. Fundamental issues addressed in this experiment include the impact of buoyancy on the structure and flame length, temperatures, radiation, and emissions of fully-modulated flames.

Hermanson, J. C.↗
NASA NTRS2001

An Investigation of Fully Modulated, Turbulent Diffusion Flames in Reduced Gravity

Pulsed combustion appears to have the potential to provide for rapid fuel/air mixing, compact and economical combustors, and reduced exhaust emissions. The objective of this Flight-Definition experiment (PuFF, for Pulsed-Fully Flames) is to increase the fundamental understanding of the fuel/air mixing and combustion behavior of pulsed, turbulent diffusion flames by conducting experiments in microgravity. In this research the fuel jet is fully modulated (i.e., completely shut off between pulses) by an externally controlled valve system. This gives rise to drastic modification of the combustion and flow characteristics of flames, leading to enhanced fuel/air mixing mechanisms not operative for the case of acoustically excited or partially-modulated jets. The fully-modulated injection approach also simplifies the combustion process by avoiding the acoustic forcing generally present in pulsed combustors. Relatively little is known about the behavior of turbulent flames in reduced-gravity conditions, even in the absence of pulsing. Fundamental issues addressed in this experiment include the impact of buoyancy on the fuel/air mixing and combustion characteristics of fully-modulated flames. It is also important for the planned space experiments to establish the effects of confinement and oxidizer co-flow on these flames.

Hermanson, J. C.↗
DOE OSTI2024

On how structures convey non-diffusive turbulence spreading

Abstract We report on comprehensive experimental studies of turbulence spreading in edge plasmas. These studies demonstrate the relation of turbulence spreading and entrainment to intermittent convective density fluctuation events or bursts (i.e. blobs and holes). The non-diffusive character of turbulence spreading is thus elucidated. The turbulence spreading velocity (or mean jet velocity) manifests a linear correlation with the skewness of density fluctuations, and increases with the auto-correlation time of density fluctuations. Turbulence spreading by positive density fluctuations is outward, while spreading by negative density fluctuations is inward. The degree of symmetry breaking between outward propagating blobs and inward propagating holes increases with the amplitude of density fluctuations. Thus, blob-hole asymmetry emerges as crucial to turbulence spreading. These results highlight the important role of intermittent convective events in conveying the spreading of turbulence, and constitute a fundamental challenge to existing diffusive models of spreading.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1980

An analysis of turbulent diffusion flame in axisymmetric jet

The kinetic theory of turbulent flow was employed to study the mixing limited combustion of hydrogen in axisymmetric jets. The integro-differential equations in two spatial and three velocity coordinates describing the combustion were reduced to a set of hyperbolic partial differential equations in the two spatial coordinates by a binodal approximation. The MacCormick's finite difference method was then employed for solution. The flame length was longer than that predicted by the flame-sheet analysis, and was found to be in general agreement with a recent experimental result. Increase of the turbulence energy and scale resulted in an enhancement of the combustion rate and, hence, in a shorter flame length. Details of the numerical method as well as of the physical findings are discussed.

Chung, P. M.↗
NASA NTRS1994

Turbulent diffusion and concentration of chondrules in the protoplanetary nebula

Turbulence is known to possess structure on many scales. The largest or integral scale L is usually taken to be the largest dimension of the system. Two different turbulent regimes are likely to be of importance. Early stage convective turbulence in a hot nebula probably extends over the entire nebula scale height, and probably has typical eddy frequency comparable to the orbit frequency. At a later stage, midplane shear layer turbulence can be driven by the presence of a differently rotating, densely settled particle layer, with different length and timescales.

Cuzzi, J. N.↗
NASA NTRS1994

Turbulent Diffusion and Concentration of "Chondrules" in the Protoplanetary Nebula

Turbulence is known to possess structure on many scales. The largest or integral scale L is usually taken to be the largest relevant dimension of the system; for the nebula as a whole, it would be on the order of a vertical gas scale height H approximately 0.1R where R is the distance from the sun. Turbulent kinetic energy cascades towards smaller scales; for fully developed, homogeneous turbulence, the turbulent kinetic energy peaks at the integral scale and is distributed within its "inertial range" according to the Kolmogorov energy spectrum dE(k) = E(sub 0)(kL)(sup -5/3)dk where k is the wavenumber or inverse wavelength. The smallest scale in a turbulent regime is the Kolmogorov scale (n)(sometimes referred to as the inner scale). On this scale, molecular viscosity can dissipate turbulent kinetic energy . Turbulent flows are characterized by their Reynolds number Re = UL/v, where U is a characteristic velocity scale and v is molecular viscosity. More energetic (higher Re) flows drive turbulence to smaller Kolmogorov scales: n = LRe(sup -3/4). Two different turbulent regimes are likely to be of importance; early stage convective turbulence in a hot nebula probably extends over the entire nebula scale height, and probably has typical eddy frequency comparable to the orbit frequency. At a later stage, midplane shear layer turbulence can be driven by the presence of a differentially rotating, densely settled particle layer, with different length and time scales.

Cuzzi, Jeffrey N.↗
NASA NTRS1999

Turbulent Diffusivities for Momentum, Heat, Salt and Passive Scalars

A program began ten years ago to build a turbulence model to describe high Reynolds numbers flows. Specifically, the aim was to devise a model that would satisfy two basic conditions: reproduce available turbulence data (laboratory, numerical simulations, etc.) concerning shear driven flows, buoyancy driven flows, 2D turbulence, freely decaying turbulence etc., and yet be manageable so as to be used, for example, in GCM'S. The model was presented in a series of papers that have appeared in Physics of Fluids since 1996. A total of about 80 turbulence statistics were reproduced. The model has no adjustable parameters. The next step was to apply the model to construct the vertical diffusities K for moment K(sub m), temperature K(sub h), salt K(sub s), and passive scalars K(sub c). First, we took K(sub c) = K(sub h) and tested the model using the GFDL ocean model. The results for the profiles of T and S vs. depth are indistinguishable from those derided using the latest model, the KPP model by the NCAR group. Presently, we are running the same GFDL code relaxing the assumptive K(sub c) = K(sub h). Indeed, the turbulence model yelds a salt diffusivity that depends on R(sub i) and R(sub rho) = ((beta)(delta)S/(alpha)(delta)T/(delta)z) in such a way that K(sub s) may be quite different from K(sub h). Salt fingers and double diffusivity laboratory data are reproduced. Results from the ocean model will be available shortly. Finally, we are trying to derive the horizontal diffusivities with the goal of providing a physically acceptable representation of mesoscale eddies. The recently suggested GMW parameterization has improved several O-GCM results and the goal here is to try to derive/justify it from a turbulence model and/or propose improvements/modifications. Theoretical work is in progress.

Canuto, V. M.↗
NASA NTRS1999

Turbulent Diffusivities for Momentum, Heat, Salt and Passive Scalars

A program began ten years ago to build a turbulence model to describe high Reynolds numbers flows. Specifically, the aim was to devise a model that would satisfy two basic conditions: reproduce available turbulence data (laboratory, numerical simulations, etc.) concerning shear driven flows, buoyancy driven flows, 2D turbulence, freely decaying turbulence etc., and yet be manageable so as to be used, for example, in General Circulation Models (GCM'S). The model was presented in a series of papers that have appeared in Physics of Fluids since 1996. A total of about 80 turbulence statistics were reproduced. The model has no adjustable parameters. The next step was to apply the model to construct the vertical diffusities K for moment K(sub m), temperature K(sub h), salt K(sub s). and passive scalars K(sub c). First, we took K(sub s) = K(sub h) and tested the model using the GFDL ocean model. The results for the profiles of T and S vs. depth are indistinguishable from those derived using the latest model, the KPP model by the NCAR group. Presently, we are running the same Geophysical Fluid Dynamics Laboratory (GFDL) code relaxing the assumptive K(sub s) = K(sub h). Indeed, the turbulence model yields a salt diffusivity that depends on Ri and R rho (= Beta delta S/delta z/alpha delta T/delta z) in such a way that K(sub s) may be quite different from K(sub h). Salt fingers and double diffusivity laboratory data are reproduced. Results from the ocean model will be available shortly. Finally, we are trying to derive the horizontal diffusivities with the goal of providing a physically acceptable representation of mesoscale eddies. The recently suggested GMW parameterization has improved several O-GCM results and the goal here is to try to derive/justify it from a turbulence model and/or propose improvements/modifications. Theoretical work is in progress.

Canuto, V. M.↗
NASA NTRS1999

Turbulent Diffusivities for Momentum, Heat, Salt and Passive Scalars

A program began ten years ago to build a turbulence model to describe high Reynolds numbers flows. Specifically, the aim was to devise a model that would satisfy two basic conditions: reproduce available turbulence data (laboratory, numerical simulations, etc.) concerning shear driven flows, buoyancy driven flows, 2D turbulence, freely decaying turbulence etc., and yet be manageable so as to be used, for example, in GCM'S. The model was presented in a series of papers that have appeared in Physics of FLuids since 1996. A total of about 80 turbulence statistics were reproduced. The model has no adjustable parameters. The next step was to apply the model to construct the vertical diffusivities K for moment K(sub m), temperature K(sub h), salt K(sub g) and passive scalars K(sub c). First, we took K(sub g) = K(sub h) and tested the model using the Geophysical Fluid Dynamics Laboratory (GFDL) ocean model. The results for the profiles of T and S vs. depth are indistinguishable from those derided using the latest model, the KPP model by the NCAR group. Presently, we are running the same GFDL code relaxing the assumptive K(sub g) = K(sub h). Indeed, the turbulence model yields a salt diffusivity that depends on Ri and R Rho (= Beta Sigma S/Sigma z/Alpha Sigma T/Sigma z) in such a way that K(sub g) may be quite different from K(sub h). Salt fingers and double diffusivity laboratory data are reproduced. Results from the ocean model will be available shortly. Finally, we are trying to derive the horizontal diffusivities with the goal of providing a physically acceptable representation of mesoscale eddies. The recently suggested GMW parameterization has improved several O-GCM results and the goal here is to try to derive/justify it from a turbulence model and/or propose improvements/modifications. Theoretical work is in progress.

Canuto, Vittorio↗
NASA NTRS1974

Development of a second order closure model for computation of turbulent diffusion flames

A typical eddy box model for the second-order closure of turbulent, multispecies, reacting flows developed. The model structure was quite general and was valid for an arbitrary number of species. For the case of a reaction involving three species, the nine model parameters were determined from equations for nine independent first- and second-order correlations. The model enabled calculation of any higher-order correlation involving mass fractions, temperatures, and reaction rates in terms of first- and second-order correlations. Model predictions for the reaction rate were in very good agreement with exact solutions of the reaction rate equations for a number of assumed flow distributions.

Varma, A. K.↗