Search NASA⌕ Search

SEARCH · Search NASA

Results for “Tabulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Modeling ignition and chemical structure of partially premixed turbulent flames using tabulated chemistry

Correctly reproducing the autoignition and the chemical composition of partially premixed turbulent flames is a challenge for numerical simulations of industrial applications such as diesel engines. A new model DF-PCM (diffusion flame presumed conditional moment) is proposed based on a coupling between the FPI (flame prolongation of ILDM) tabulation method and the PCM (presumed conditional moment) approach. Because the flamelets used to build the table are laminar diffusion flames, DF-PCM cannot be used for industrial applications like Diesel engines due to excessive CPU requirements. Therefore two new models called AI-PCM (autoignition presumed conditional moment) and ADF-PCM (approximated diffusion flames presumed conditional moment) are developed to approximate it. These models differ from DF-PCM because the flamelet libraries used for the table rely on PSR calculations. Comparisons between DF-PCM, AI-PCM, and ADF-PCM are performed for two fuels, n-heptane, representative of diesel fuels, and methane, which does not exhibit a ''cool flame'' ignition regime. These comparisons show that laminar diffusion flames can be approximated by flamelets based on PSR calculations in terms of autoignition delays and steady state profiles of the progress variable. Moreover, the evolution of the mean progress variable of DF-PCM can be correctly estimated by the approximated models. However, as discussed in this paper, errors are larger for CO and CO{sub 2} mass fractions evolutions. Finally, an improvement to ADF-PCM, taking into account ignition delays, is proposed to better reproduce the ignition of very rich mixtures. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear Magnetic Dipole and Electric Quadrupole Moments: Their Measurement and Tabulation as Accessible Data

The most recent tabulations of nuclear magnetic dipole and electric quadrupole moments have been prepared and published by the Nuclear Data Section of the IAEA, Vienna [N. J. Stone, Report No. INDC(NDS)-0650 (2013); Report No. INDC(NDS)-0658 (2014)]. The first of these is a table of recommended quadrupole moments for all isotopes in which all experimental results are made consistent with a limited number of adopted standards for each element; the second is a combined listing of all measurements of both moments. Both tables cover all isotopes and energy levels. In this paper, the considerations relevant to the preparation of both tables are described, together with observations as to the importance and (where appropriate) application of necessary corrections to achieve the “best” values. Some discussion of experimental methods is included with emphasis on their precision. The aim of the published quadrupole moment table is to provide a standard reference in which the value given for each moment is the best available and for which full provenance is given. A table of recommended magnetic dipole moments is in preparation, with the same objective in view.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tabulated equation of state for supernova matter including full nuclear ensemble

This is an introduction to the tabulated database of stellar matter properties calculated within the framework of the Statistical Model for Supernova Matter (SMSM). The tables present thermodynamical characteristics and nuclear abundances for 31 values of baryon density (10{sup –8} < ρ/ρ{sub 0} < 0.32, ρ{sub 0} = 0.15 fm{sup –3} is the normal nuclear matter density), 35 values of temperature (0.2 MeV < T < 25 MeV), and 28 values of electron-to-baryon ratio (0.02 < Y{sub e} < 0.56). The properties of stellar matter in β equilibrium are also considered. The main ingredients of the SMSM are briefly outlined, and the data structure and content of the tables are explained.

79 ASTRONOMY AND ASTROPHYSICS↗

Tabulated equations of state from models informed by chiral effective field theory

Abstract We construct four equation of state (EoS) tables, tabulated over a range of temperatures, densities, and charge fractions, relevant for neutron star applications such as simulations of neutron star mergers. The EoS are computed from a relativistic mean-field theory constrained by the pure neutron matter EoS from chiral effective field theory, inferred properties of isospin-symmetric nuclear matter, and astrophysical observations of neutron star structure. To model nuclear matter at low densities, we attach an EoS that models inhomogeneous nuclear matter at arbitrary temperatures and charge fractions. The four EoS tables we develop are available from the CompOSE EoS repository https://compose.obspm.fr/eos/297 and gitlab.com/ahaber/qmc-rmf-tables .

79 ASTRONOMY AND ASTROPHYSICS↗

TabVar: Tabulated Variables

TabVar: A Python library for manipulating datasets in the form of tabulated variables. Tables in tabvar contain many columns representing independent variables, but exactly one distinguished column for the dependent variable. Having a single distinguished column allows a natural lifting of arithmetic operators to tables, much (and in fact fully generalizing) multidimensional array arithmetic. The convenient syntax of whole-table arithmetic, along with the usual operations of filtering and aggregation, and all in the setting of python's interactive REPL allows for rapid exploration of datasets.

Bachan, John↗

Tabulated Neutron Emission Rates for Plutonium Oxide

This work tabulates neutron emission rates for 80 plutonium oxide samples as reported in the literature. Plutonium-­238 and plutonium-­239 oxides are included and such emission rates are useful for scaling tallies from Monte Carlo simulations and estimating dose rates for health physics applications.

61 RADIATION PROTECTION AND DOSIMETRY↗

Tabulated data for Lignin-Derived Phenolic Compounds and Water Are Effective Cosolvents for Reductive Catalytic Fractionation

Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents. This is the tabulated data for the paper

biorefining↗

Machine Learning-Driven Conservative-to-Primitive Conversion in Hybrid Piecewise Polytropic and Tabulated Equations of State

We present a novel machine learning (ML)-based method to accelerate conservative-to-primitive inversion, focusing on hybrid piecewise polytropic and tabulated equations of state. Traditional root-finding techniques are computationally expensive, particularly for large-scale relativistic hydrodynamics simulations. To address this, we employ feedforward neural networks (NNC2PS and NNC2PL), trained in PyTorch (2.0+) and optimized for GPU inference using NVIDIA TensorRT (8.4.1), achieving significant speedups with minimal accuracy loss. The NNC2PS model achieves 𝐿 1 and 𝐿 ∞ errors of 4.54 × 10 −7 and 3.44 × 10−6, respectively, while the NNC2PL model exhibits even lower error values. TensorRT optimization with mixed-precision deployment substantially accelerates performance compared to traditional root-finding methods. Specifically, the mixed-precision TensorRT engine for NNC2PS achieves inference speeds approximately 400 times faster than a traditional single-threaded CPU implementation for a dataset size of 1,000,000 points. Ideal parallelization across an entire compute node in the Delta supercomputer (dual AMD 64-core 2.45 GHz Milan processors and 8 NVIDIA A100 GPUs with 40 GB HBM2 RAM and NVLink) predicts a 25-fold speedup for TensorRT over an optimally parallelized numerical method when processing 8 million data points. Moreover, the ML method exhibits sub-linear scaling with increasing dataset sizes. We release the scientific software developed, enabling further validation and extension of our findings. By exploiting the underlying symmetries within the equation of state, these findings highlight the potential of ML, combined with GPU optimization and model quantization, to accelerate conservative-to-primitive inversion in relativistic hydrodynamics simulations.

conservative-to-primitive conversion↗

Optimization of Workload Distribution of Data Centers Based on a Self-Learning In Situ Adaptive Tabulation Model

Data center cooling typically involves non-uniform airflow and temperature distributions, which are affected by the IT workload distribution. It is helpful to simulate the airflow and temperature to optimize the workload distribution. Traditional computational fluid dynamics (CFD) simulation is usually time-consuming while conventional reduced order models (ROMs), though computationally fast, may generate inaccurate results even after being fully trained. In Situ Adaptive Tabulation (ISAT), contracting to conventional ROM, can make prediction with error lower than a user-specified tolerance. To demonstrate using of ISAT for optimal workload distribution in data center, this paper presents a preliminary study of an ISAT-based genetic algorithm optimization platform. The ISAT is trained offline by using the results from CFD simulations using a hypothetical simple data center. The optimal workload distribution determined by the platform leads to approximately 6.8% of energy savings when compared to the benchmark with a uniform workload distribution. We note that the time cost for the entire optimization process, including the training of ISAT is about 4 hours, which is acceptable in the design phase.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Time integration of reacting flows with CSP tabulation.

This paper presents recent progress on the use of Computational Singular Perturbation (CSP) techniques for time integration of stiff chemical systems. The CSP integration approach removes fast time scales from the reaction system, thereby enabling integration with explicit time stepping algorithms. For further efficiency improvements, a tabulation strategy was developed to allow reuse of the relevant CSP quantities. This paper outlines the method and demonstrates its use on the simulation of hydrogen-air ignition.

08 HYDROGEN↗

Using the tabulated diffusion flamelet model ADF-PCM to simulate a lifted methane-air jet flame

Two formulations of a turbulent combustion model based on the approximated diffusion flame presumed conditional moment (ADF-PCM) approach [J.-B. Michel, O. Colin, D. Veynante, Combust. Flame 152 (2008) 80-99] are presented. The aim is to describe autoignition and combustion in nonpremixed and partially premixed turbulent flames, while accounting for complex chemistry effects at a low computational cost. The starting point is the computation of approximate diffusion flames by solving the flamelet equation for the progress variable only, reading all chemical terms such as reaction rates or mass fractions from an FPI-type look-up table built from autoigniting PSR calculations using complex chemistry. These flamelets are then used to generate a turbulent look-up table where mean values are estimated by integration over presumed probability density functions. Two different versions of ADF-PCM are presented, differing by the probability density functions used to describe the evolution of the stoichiometric scalar dissipation rate: a Dirac function centered on the mean value for the basic ADF-PCM formulation, and a lognormal function for the improved formulation referenced ADF-PCM{chi}. The turbulent look-up table is read in the CFD code in the same manner as for PCM models. The developed models have been implemented into the compressible RANS CFD code IFP-C3D and applied to the simulation of the Cabra et al. experiment of a lifted methane jet flame [R. Cabra, J. Chen, R. Dibble, A. Karpetis, R. Barlow, Combust. Flame 143 (2005) 491-506]. The ADF-PCM{chi} model accurately reproduces the experimental lift-off height, while it is underpredicted by the basic ADF-PCM model. The ADF-PCM{chi} model shows a very satisfactory reproduction of the experimental mean and fluctuating values of major species mass fractions and temperature, while ADF-PCM yields noticeable deviations. Finally, a comparison of the experimental conditional probability densities of the progress variable for a given mixture fraction with model predictions is performed, showing that ADF-PCM{chi} reproduces the experimentally observed bimodal shape and its dependency on the mixture fraction, whereas ADF-PCM cannot retrieve this shape. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physics informed machine learning for chemistry tabulation

Modeling of turbulent combustion system requires modeling the underlying chemistry and the turbulent transport. Solving both systems simultaneously is computationally prohibitive. Instead, given the difference in scales at which the two sub-systems evolve, the two sub-systems are typically (re)solved separately. Popular approaches such as the Flamelet Generated Manifolds (FGM) use a two-step strategy where the governing reaction kinetics are pre-computed and mapped to a low-dimensional manifold, characterized by a few reaction progress variables (model reduction) and the manifold is then “looked-up” during the run-time to estimate the high-dimensional system state by the turbulent transport system. While existing works have focused on these two steps independently, in this work we show that joint learning of the progress variables and the look-up model, can yield more accurate results. Here, we build on the base formulation and implementation to include the dynamically generated Thermochemical State Variables (Lower Dimensional Dynamic Source Terms). We discuss the challenges in the implementation of this deep neural network architecture and experimentally demonstrate its superior performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Further Development of the Tamped Richtmyer-Meshkov Instability Method and Application to Molybdenum Dynamic Strength Calibration and Tabulation

The high pressure and high strain rate dynamic strength of Mo is experimentally and computationally investigated in the 3–20 GPa stress, 50–600 C temperature, and 10 5 –10 6 /s strain rate regimes using a modified tamped Richtmyer-Meshkov instability (RMI) method. Modifications to the tamped RMI method include a method to determine loading states during strain, a new strength calibration function based on interface shape, and a robust uncertainty quantification method. These modifications improve fidelity of the tamped RMI method, allowing evaluation of the compensating effects of pressure hardening, strain rate hardening, strain hardening, and thermal softening. The new calibration function based on interface shape is not limited to sinusoidal corrugations and could be applied to additional interface shapes. Plate impact experiments are performed at Argonne National Laboratory’s Advanced Photon Source’s Dynamic Compression Sector operated by Washington State University (DCS), driving a planar shock front through a corrugated Mo-D 2 O or Mo-C 8 F 18 interface, forcing the corrugation to significantly deform. The extent of interfacial deformation, RMI growth, is experimentally observed using X-ray phase contrast imaging at the DCS. RMI jet lengths and jet shapes are extracted from the experimental radiographs, then used to calibrate numerical simulations performed with the Sandia National Laboratories (SNL) hydrocode CTH. Mo yield strength, Y, as a function of shock pressure, P, strain rate, $\dot{\varepsilon }$, accumulated strain, ϵ, relative volumetric compression, RD , and temperature, T , is determined for each impact experiment and presented. The calibrated Mo yield strength values range 1.2–1.8 GPa, with strength generally decreasing as the impact stress increases. This trend is likely caused by thermal softening or strain localization. The tabular yield strength versus loading condition data presented in this paper can be used to fit complex strength models.

Voorhees, T. J. [Sandia National Lab. (SNL-CA), Li↗

Efficient bifurcation and tabulation of multi-dimensional combustion manifolds using deep mixture of experts: An a priori study

This work describes and validates an approach for autonomously bifurcating turbulent combustion man-ifolds to divide regression tasks amongst specialized artificial neural networks (ANNs). This approach relies on the mixture of experts (MoE) framework, where each neural network is trained to be specialized in a given portion of the input space. The assignment of different input regions to the experts is determined by a gating network, which is a neural network classifier. In some previous studies, it has been demonstrated that bifurcation of a complex combustion manifold and fitting different ANNs for each part leads to better fits or faster inference speeds. However, the manner of bifurcation in these studies was based on heuristic approaches or clustering techniques. In contrast, the proposed technique enables automatic bifurcation using non-linear planes in high-dimensional turbulent combustion manifolds that are often associated with complex behavior due to different dominating physics in various zones. Furthermore, the proposed concept is validated using 4-dimensional (4D) and 5D flamelet tables, showing that the errors obtained with a given network size, or conversely the network size required to achieve a given accuracy, is considerably reduced. The effect of the number of experts on inference speed is also investigated, showing that by increasing the number of experts from 1 to 8, the inference time can be approximately reduced by a factor of two. Moreover, it is shown that the MoE approach divides the input manifold in a physically intuitive manner, suggesting that the MoE framework can elucidate high-dimensional datasets in a physically meaningful way.

42 ENGINEERING↗

Addition of tabulated equation of state and neutrino leakage support to illinoisgrmhd

Here we have added support for realistic, microphysical, finite-temperature equations of state (EOS) and neutrino physics via a leakage scheme to illinoisgrmhd, an open-source GRMHD code for dynamical spacetimes in the einstein toolkit. These new features are provided by two new, nrpy+-based codes: nrpyeos, which performs highly efficient EOS table lookups and interpolations, and nrpyleakage, which implements a new, adaptive mesh refinement (AMR)-capable neutrino leakage scheme in the einstein toolkit. We have performed a series of strenuous validation tests that demonstrate the robustness of these new codes, particularly on the Cartesian AMR grids provided by carpet. Furthermore, we show results from fully dynamical GRMHD simulations of single unmagnetized neutron stars, and magnetized binary neutron star mergers. This new version of illinoisgrmhd, as well as nrpyeos and nrpyleakage, is pedagogically documented in jupyter notebooks and fully open source. The codes will be proposed for inclusion in an upcoming version of the einstein toolkit.

79 ASTRONOMY AND ASTROPHYSICS↗

SESAME: The Los Alamos National Laboratory’s Tabulated Equation of State Database Description with Extensions for Multi-phase Representations

Modeling of the thermodynamic equation of state (EOS) of various materials has had a long storied tradition at LANL. As early as 1949 Feynman, Metropolis, and Teller published a paper presenting EOS values for some elements and a methodology for calculating the EOS at high compression [1]. Cowan and Ashkin made notable methodology improvements for compressed materials throughout the 1950’s and beyond [2]. In 1971 Jack Barnes and Jerry Rood created the SESAME database and by 1972 the database became publicly available.

36 MATERIALS SCIENCE↗