Search NASA⌕ Search

SEARCH · Search NASA

Results for “Taylor series”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Multiscale Temporal Variability of the Global Air‐Sea CO 2 Flux Anomaly

Abstract The global air‐sea CO 2 flux (F) impacts and is impacted by a plethora of climate‐related processes operating at multiple time scales. In bulk mass transfer formulations, F is driven by physico‐ and bio‐chemical factors such as the air‐sea partial pressure difference (∆pCO 2 ), gas transfer velocity, sea surface temperature, and salinity–all varying at multiple time scales. To de‐convolve the impact of these factors on variability in F at different time scales, time‐resolved estimates of F were computed using a global data set assembled between 1988 and 2015. The F anomalies were defined as temporal deviations from the 28‐year time‐averaged value. Spectral analysis revealed four dominant timescales of variability in F–subseasonal, seasonal, interannual, and decadal with relative amplitude differences varying across regions. A second‐order Taylor series expansion was then conducted along these four timescales to separate drivers across differing regions. The analysis showed that on subseasonal timescales, wind speed variability explains some 66% of the global F anomaly and is the dominant driver. On seasonal, interannual, and decadal timescales, the ∆pCO 2 effect controlled by the ∆pCO 2 anomaly, explained much of the F anomaly. On decadal timescales, the F anomaly was almost entirely governed by the ∆pCO 2 effect with large contributions from high latitudes. The main drivers across timescales also dominate the regional F anomaly, particularly in the mid‐high latitude regions. Finally, the driver of the ∆pCO 2 effect was closely connected with the relative strength of atmospheric pCO 2 and the nonthermal component of oceanic pCO 2 anomaly associated with dissolved inorganic carbon and alkalinity.

Environmental Sciences & Ecology↗

A Gradient Based Subgrid-Scale Parameterization for Ocean Mesoscale Eddies

Mesoscale eddies play an important role in transport of heat and biogeochemical tracers in the global ocean circulation. Resolving these energetic eddies, however, is challenging in ocean general circulation models (OGCM) because it requires a horizontal grid spacing of ≲1/8° that is computationally expensive. As a result, we are required to parameterize mesoscale eddy effects on large-scale ocean flows. In this work, we introduce a new subgrid-scale (SGS) model that is developed based on a Taylor series expansion of resolved variables to parameterize subgrid mesoscale eddy transports and momentum fluxes in OGCM. We have performed an a priori study to evaluate the performance of our new gradient model using high-resolution ocean simulations. Our results show that the gradient model well predicts the actual SGS thickness fluxes in the zonal and meridional directions in coarse-resolution simulations with the grid spacing ≳1/4°. The unresolved kinetic energy at the ocean surface is also skillfully estimated. More importantly, unlike current mesoscale eddy parameterizations, which are mainly developed based on an assumption of flat bottom ocean, our new SGS model can capture the structure of unresolved standing meanders at the ocean surface. We have also developed a dynamic procedure for setting in non-dimensional parameters in our new parameterization through a non-ad hoc and tuning-free method. Overall, this work suggests that implementing the gradient model in OGCM can improve the model accuracy with an affordable computational cost in eddy-permitting and non-eddying simulations.

54 ENVIRONMENTAL SCIENCES↗

Critical percolation on the kagome hypergraph

In this report we study the percolation critical surface of the kagome lattice in which each triangle is allowed an arbitrary connectivity. Using the method of critical polynomials, we find points along this critical surface to high precision. This kagome hypergraph contains many unsolved problems as special cases, including bond percolation on the kagome and (3, 12 2 ) lattices, and site percolation on the hexagonal, or honeycomb, lattice, as well as a single point for which there is an exact solution. We are able to compute enough points along the critical surface to find a very accurate fit, essentially a Taylor series about the exact point, that allows estimations of the critical point of any system that lies on the surface to precision rivaling Monte Carlo and traditional techniques of similar accuracy. We find also that this system sheds light on some of the surprising aspects of the method of critical polynomials, such as why it is so accurate for certain problems, like the kagome and (3, 12 2 ) lattices. The bond percolation critical points of these lattices can be found to 17 and 18 digits, respectively, because they are in close proximity, in a sense that can be made quantitative, to the exact point on the critical surface. We also discuss in detail a parallel implementation of the method which we use here for a few calculations.

97 MATHEMATICS AND COMPUTING↗

Redshift drift cosmography with ELT and SKAO measurements

ABSTRACT Mapping the expansion history of the universe is a compelling task of physical cosmology, especially in the context of the observational evidence for the recent acceleration of the universe, which demonstrates that canonical theories of cosmology and particle physics are incomplete and that there is new physics still to be discovered. Cosmography is a phenomenological approach to cosmology, where (with some caveats) physical quantities are expanded as a Taylor series in the cosmological redshift z, or analogous parameters such as the rescaled redshift y = z/(1 + z) or the logarithmic redshift x = ln (1 + z). Moreover, the redshift drift of objects following cosmological expansion provides a model-independent observable, detectable by facilities currently under construction, viz. the Extremely Large Telescope and the Square Kilometre Array Observatory (at least in its full configuration). Here, we use simulated redshift drift measurements from the two facilities to carry out an assessment of the cosmological impact and model discriminating power of redshift drift cosmography. We find that the combination of measurements from the two facilities can provide a stringent test of the Λ cold dark matter paradigm, and that overall the logarithmic-based expansions of the spectroscopic velocity drift are the most reliable ones, performing better than analogous expansions in the redshift or the rescaled redshift: the former nominally gives the smaller error bars for the cosmographic coefficients but is vulnerable to biases in the higher order terms (in other words, it is only reliable at low redshifts), while the latter always performs poorly.

Rocha, B. A. R.↗

Generalized quasiharmonic approximation via space group irreducible derivatives

The quasiharmonic approximation (QHA) is the simplest nontrivial approximation for interacting phonons under constant pressure, bringing the effects of anharmonicity into temperature-dependent observables. Nonetheless, the QHA is often implemented with additional approximations due to the complexity of computing phonons under arbitrary strains, and the generalized QHA, which employs constant stress boundary conditions, has not been completely developed. In this work we formulate the generalized QHA, providing a practical algorithm for computing the strain state and other observables as a function of temperature and true stress. We circumvent the complexity of computing phonons under arbitrary strains by employing irreducible second-order displacement derivatives of the Born-Oppenheimer potential and their strain dependence, which are efficiently and precisely computed using the lone irreducible derivative approach. We formulate two complementary strain parametrizations: a discretized strain grid interpolation and a Taylor series expansion in symmetrized strain. We illustrate our approach by evaluating the temperature and pressure dependence of select elastic constants and the thermal expansion in thoria (ThO 2 ) using density functional theory with three exchange-correlation functionals. The QHA results are compared to our measurements of the elastic constant tensor using time-domain Brillouin scattering and inelastic neutron scattering. Our irreducible derivative approach simplifies the implementation of the generalized QHA, which will facilitate reproducible, data-driven applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamic Phasor Modeling of Various Multipulse Rectifiers and a VSI Fed by 18-Pulse Asymmetrical Autotransformer Rectifier Unit for Fast Transient Analysis

To study the fast modelling of dynamic characteristics caused by power electronic switching, the dynamic phasor (DP) theory based on the time-varying Fourier decomposition and frequency shifting is firstly applied to the modelling of various multipulse rectifiers. The DP model for symmetrical 12-pulse phase-shifting reactor rectifier unit (PSR-RU) is derived with model order reduction, relations between ac and dc terminals, and Taylor series expansion. The DP model of asymmetrical 18-pulse autotransformer rectifier unit (AT-RU) is proposed based on the switching functions expressed in the DP domain. Meanwhile, the DP model of voltage source inverter (VSI) fed by asymmetrical 18-pulse AT-RU is built with the harmonic state-space (HSS) equations. Under both balanced and unbalanced conditions, the good calculation accuracy and rapid simulation speed of the developed DP models are validated by the detailed time-domain (TD) simulation.

42 ENGINEERING↗

A Voltage Inference Framework for Real-Time Observability in Active Distribution Grids

Active distribution grids are gaining traction to meet the growing environmental, socio-economic, and sustainability targets. Various advanced smart grid technologies facilitate the integration of Distributed Energy Resources (DERs) by supporting the bi-directional power flow. The limited observability of distribution grids, primarily related to their location at the very edge of power system infrastructure, brings challenges to optimal grid management. Moreover, only a limited number of measurements at regular intervals are usually available. This paper presents a novel inference framework, referred to as “Voltage Inference”, to overcome the observability issues. The proposed framework employs a prediction step based on the Multivariate Taylor series approximation, followed by a corrector step that minimizes the estimation error to infer the otherwise unknown voltages from the available measurements. Furthermore, numerical results on the IEEE 13-bus test feeder validate the accuracy and computational performance of the proposed framework.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A New Analytical Expression for Estimating the Adiabatic Temperature Rise in Lithium-Ion Batteries During High-Power Pulses

A coupled, thermal-electrochemical model is used to explain why the Joule heating assumption (i.e., I 2 R) does not provide a good representation of the temperature rise during high power pulses in lithium-ion batteries, even in cases where the reversible heat generation can be neglected. The poor agreement occurs because the internal resistance changes during the pulse due to the opposing effects of mass transport in the electrolyte, which raises the resistance, and heat generation (temperature rise), which lowers the resistance. These insights are used to propose a new analytical expression for predicting the temperature rise during adiabatic pulses with limited experimental and physical data. The expression accounts for thermal effects using a Taylor series expansion of an Arrhenius-type equation. It accounts for transport effects using an approximate solution to the one-dimensional diffusion equation. The new expression is shown to accurately estimate the simulated, adiabatic temperature rise across a range of loadings (1 to 4 mAh cm -2 ) and C-rates (1C to 10C) for cells containing LiNi 0.5 Mn 0.3 Co 0.2 O 2 positive electrodes and graphite negative electrodes. In conclusion, it is also shown to accurately estimate the experimental, adiabatic temperature rise measured for cells with LiFePO 4 positive electrodes and mesocarbon negative electrodes with minimal changes to the fitted parameters.

25 ENERGY STORAGE↗

Improved Prediction of Cold-Air Pools in the Weather Research and Forecasting Model Using a Truly Horizontal Diffusion Scheme for Potential Temperature

The terrain-following vertical coordinate system used by many atmospheric models, including the Weather Research and Forecasting (WRF) Model, is prone to errors in regions of complex terrain. These errors stem, in part, from the calculation of horizontal gradients within the diffusion term of the momentum or scalar evolution equations. In WRF, such gradients can be calculated along coordinate surfaces, or using metric terms that help account for grid skewness. However, neither of these options ensures a truly horizontal gradient calculation, especially if a grid cell is skewed enough that the heights of the neighboring grid points used in the calculation fall outside the vertical range of the cell. In this work, an improved scheme that uses Taylor series approximations to vertically interpolate variables to the level necessary for a truly horizontal gradient calculation is implemented in WRF for the diffusion of potential temperature. The scheme is validated using an atmosphere-at-rest configuration, in which spurious flows develop only as a result of numerical errors and can thus be used as a proxy for model performance. Following validation, the method is applied to the simulation of cold-air pools (CAPs), which occur in regions of complex terrain and are characterized by strong near-surface temperature gradients. Using the truly horizontal scheme, idealized simulations demonstrate reduced numerical mixing in a quiescent CAP, and a realistic case study in the Columbia River basin shows a reduction in positive wind speed bias by up to roughly 20% compared to observations from the Second Wind Forecast Improvement Project.

54 ENVIRONMENTAL SCIENCES↗

(U) Calculating First-Order Sensitivities to Material Density and Composition in Fixed-Source Problems Using the MCNP6 Perturbation Capability

The Taylor series (differential operator) perturbation method, as implemented in the PERT capability in MCNP6 (Ref. 1), can be used for first-order sensitivity analyses in fixed-source problems.2 Sensitivities of a response with respect to material and nuclide densities can be used for efficient first-order uncertainty quantification. This report discusses how to compute sensitivities of material densities and compositions in order to propagate uncertainties using the standard uncertainty propagation formula.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Calculation of machine precision second order derivatives using dual-complex numbers

It is well known that both complex and dual numbers can be employed to obtain machine precision first-order derivatives; however, neither, on their own, can compute machine precision 2nd order derivatives. To address this limitation, it is demonstrated in this paper that combined dual-complex numbers can be used to compute machine precision 1st and 2nd order derivatives. The dual-complex approach is simpler than utilizing multicomplex or hyper-dual numbers as existing dual libraries can be used as is or easily augmented to accept complex numbers, and the complexity of developing, integrating, and deploying multicomplex or hyper-dual libraries is avoided. The efficacy of this approach is demonstrated for both univariate and multivariate functions. Finally, source code examples using the Python, Julia, and Mathematica languages are provided as supplemental material.

97 MATHEMATICS AND COMPUTING↗

A review of high order strong stability preserving two-derivative explicit, implicit, and IMEX methods

High order strong stability preserving time discretizations ensure the nonlinear non-inner-product strong stability properties of spatial discretizations suited for the stable simulation of hyperbolic PDEs in a wide variety of application areas including fluid dynamics, magnetohydrodynamics, semiconductor devices, electromagnetics, and astrophysics. Over the past decade multiderivative time-stepping have been increasingly used for the time-evolution hyperbolic PDEs, so that the strong stability properties of these methods have become important. In this work we review sufficient conditions for a two-derivative multistage method to preserve the strong stability properties of spatial discretizations in a forward Euler and different conditions on the second derivative. In particular we present the strong stability preserving theory for explicit and implicit two-derivative Runge–Kutta schemes, including a special condition on the second derivative under which these implicit methods may be unconditionally strong stability preserving. This special condition is natural for the stiff component of wide range of plasma physics problems, and can be useful in the context of strong stability preserving implicit-explicit multi-derivative Runge–Kutta schemes, where the time-step restriction is then independent of the stiff term. Lastly, we present the strong stability preserving theory for implicit-explicit multi-derivative general linear methods, and some novel second and third order methods where the time-step restriction is independent of the stiff term.

97 MATHEMATICS AND COMPUTING↗

Adaptive Power Flow Approximations With Second-Order Sensitivity Insights

The power flow equations are fundamental to power system planning, analysis, and control. However, the inherent non-linearity and non-convexity of these equations present formidable obstacles in problem-solving processes. To mitigate these challenges, recent research has proposed adaptive power flow linearizations that aim to achieve accuracy over wide operating ranges. The accuracy of these approximations inherently depends on the curvature of the power flow equations within these ranges, which necessitates considering second-order sensitivities. In this paper, we leverage second-order sensitivities to both analyze and improve power flow approximations. We evaluate the curvature across broad operational ranges and subsequently utilize this information to inform the computation of various sample-based power flow approximation techniques. Additionally, we leverage second-order sensitivities to guide the development of rational approximations that yield linear constraints in optimization problems. In conclusion, this approach is extended to enhance accuracy beyond the limitations of linear functions across varied operational scenarios.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Validation of Nuclear Data Sensitivity Calculations by the MCNP PERT Card [Poster]

This work validates a method of estimating sensitivities that utilized the MCNP PERT card and tallies. The agreement of the PERT card and Brute Force results proves the validity of calculating nuclear data sensitivities by use of the MCNP PERT card, especially at higher energies. The overall agreement will be easier to understand once an uncertainty analysis is completed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Multi-Modal Bayesian Neural Network Surrogates with Conjugate Last-Layer Estimation

As data collection and simulation capabilities advance, multi-modal learning, the task of learning from multiple modalities and sources of data, is becoming an increasingly important area of research. Surrogate models that learn from data of multiple auxiliary modalities to support the modeling of a highly expensive quantity of interest have the potential to aid outer loop applications such as optimization, inverse problems, or sensitivity analyses when multi-modal data are available. We develop two multi-modal Bayesian neural network surrogate models and leverage conditionally conjugate distributions in the last layer to estimate model parameters using stochastic variational inference (SVI). We provide a method to perform this conjugate SVI estimation in the presence of partially missing observations. Here, we demonstrate improved prediction accuracy and uncertainty quantification compared to unimodal surrogate models for both scalar and time series data.

97 MATHEMATICS AND COMPUTING↗

Physical Regime Sensitivity

Abstract This work presents a novel sensitivity approach that quantifies sensitivity to regimes of a model’s state variables rather than constitutive model parameters. This Physical Regime Sensitivity (PRS) determines which regimes of a model’s independent variables have the biggest influence on an experiment or application. PRS analysis is demonstrated on a strength model used in the simulation of a copper Taylor cylinder. In a series of simulations, the strength model was perturbed sequentially in local regimes of plastic strain, plastic strain rate, temperature and pressure, and then the prediction of cylinder shape was compared to unperturbed calculations. Results show, for example, that the deformed length of the cylinder was most sensitive to strength at a strain rate of 1.0 × 10 4 /sec., but the deformed footprint radius was most sensitive to strength at a strain rate of about 4.0 × 10 4 /sec. Compared to current histogram approaches, PRS can be used to design or interpret integrated experiments by identifying not just which regimes are accessed somewhere in the experiment but the causality question of which regimes actually affect the measured data. PRS should allow one to focus experimental and modeling efforts where they are most needed and to better interpret experiments.

36 MATERIALS SCIENCE↗