Search NASA⌕ Search

SEARCH · Search NASA

Results for “Teague”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

The 1.06 micrometer wideband laser modulator: Fabrication and life testing

The design, fabrication, testing and delivery of an optical modulator which will operate with a mode-locked Nd:YAG laser at 1.06 micrometers were performed. The system transfers data at a nominal rate of 400 Mbps. This wideband laser modulator can transmit either Pulse Gated Binary Modulation (PGBM) or Pulse Polarization Binary Modulation (PPBM) formats. The laser beam enters the modulator and passes through both crystals; approximately 1% of the transmitted beam is split from the main beam and analyzed for the AEC signal; the remaining part of the beam exits the modulator. The delivered modulator when initially aligned and integrated with laser and electronics performed very well. The optical transmission was 69.5%. The static extinction ratio was 69:1. A 1000 hour life test was conducted with the delivered modulator. A 63 bit pseudorandom code signal was used as a driver input. At the conclusion of the life test the modulator optical transmission was 71.5% and the static extinction ratio 65:1.

Teague, J. R.↗
NASA NTRS1976

Identification of satellites possibly active during the IMS and their orbital configurations

A survey has been made to identify presently operating as well as planned spacecraft which may contribute measurements of the magnetosphere or interplanetary medium during the IMS. The total set consists of 25 scientific earth-orbiting, 9 heliocentric, and 17 communication, navigation or meteorological spacecraft, which carry environmental monitoring experiments. The orbital elements of each are displayed. In addition, techniques for the display of positions in various orbits are presented to illustrate how interesting configurations can be determined during the IMS. The positions of presently orbiting heliocentric spacecraft are shown at various intervals with respect to the nominal interplanetary magnetic field spiral and the earth. Plots of the latest ISEE-A orbit in solar magnetospheric co-ordinates are presented to determine neutral-sheet crossing.

Vette, J. I.↗
NASA NTRS1977

Studies of the sea using HF radio scatter

Radio signals of decameter wavelength resonantly scattered from waves on the sea surface are used to measure precisely the wavelength, frequency, and direction of travel of those waves. These measurements are not only important in themselves, but are also used to deduce currents, winds, and perhaps wind stress at the sea surface. Techniques for obtaining these measurements, as well as experiments to evaluate these techniques are discussed. Finally, scatter has been used to produce the first high-resolution measurements of the directional distribution of large ocean waves, measurements of ocean surface currents at ranges of 20 km, and of surface winds at ranges of 3000 km.

Teague, C. C.↗
NASA NTRS1979

A study of inner zone electron data and their comparison with trapped radiation models

A summary and intercomparison of recent inner radiation zone electron data are presented. The morphology of the inner radiation zone is described and the data compared with the current generation of inner zone trapped electron models. An analytic representation of the inner zone equatorial pitch angle distribution is presented. This model was based upon data from eight satellites and was used to reduce all data to the form of equatorial flux. Although no Starfish-free high energy electron measurements were available from the inner portion of the inner radiation zone, it was found that the AE-6 model provided a good description of the present solar maximum environment.

Teague, M. J.↗
NASA NTRS1978

A review of the near-earth radiation environment

The spatial volume surrounding the earth out to 30 earth radii has been divided into the five regions known as the interplanetary medium, magnetosheath, plasma sheet, high-latitude magnetotail, and inner magnetosphere. In each region, the primary attributes of the particle populations and available models are described, and integral energy spectra covering the range from 10 to 10 billion eV are shown. The effects of the solar cycle on future projections are discussed.

Sawyer, D. M.↗
NASA NTRS1979

Modeling the Earth's radiation belts. A review of quantitative data based electron and proton models

The evolution of quantitative models of the trapped radiation belts is traced to show how the knowledge of the various features has developed, or been clarified, by performing the required analysis and synthesis. The Starfish electron injection introduced problems in the time behavior of the inner zone, but this residue decayed away, and a good model of this depletion now exists. The outer zone electrons were handled statistically by a log normal distribution such that above 5 Earth radii there are no long term changes over the solar cycle. The transition region between the two zones presents the most difficulty, therefore the behavior of individual substorms as well as long term changes must be studied. The latest corrections to the electron environment based on new data are outlined. The proton models have evolved to the point where the solar cycle effect at low altitudes is included. Trends for new models are discussed; the feasibility of predicting substorm injections and solar wind high-speed streams make the modeling of individual events a topical activity.

Vette, J. I.↗
NASA NTRS1979

Long term magnetospheric particle variations (1 day T infinity), appendix 2

Effects of solar variations on energetic particle propagation are discussed, as well as prediction techniques for such particles within the magnetosphere. Magnetic field models, magnetic energy stored in the tail, magnetic monitoring measurements in the geostationary orbit and at certain ground based stations are important elements concerning improving such techniques.

Vette, J. I.↗
NASA NTRS1979

Modeling of electron time variations in the radiation belts

A review of the temporal variation in the trapped electron population of the inner and outer radiation zones is presented. Techniques presently used for modeling these zones are discussed and their deficiencies identified. An intermediate region is indicated between the zones in which the present modeling techniques are inadequate due to the magnitude and frequency of magnetic storms. Future trends are examined, and it is suggested that modeling of individual magnetic storms may be required in certain L bands. An analysis of seven magnetic storms is presented, establishing the independence of the depletion time of the storm flux and the storm magnitude. Provisional correlation between the storm magnitude and the Dst index is demonstrated.

Chan, K. W.↗
NASA NTRS1980

Radar observations of wave transformations in the vicinity of islands

Remote sensing by ground-based HF radar and airborne synthetic aperture radar and in situ wave measurements performed on March 25, 1977 during the West Coast Experiment have made it possible to form an overall picture of the 7-sec-period wave climate over a 35,000 sq km region off the southern California coast. The picture which emerges from these measurements shows a broad deep-ocean directional distribution arriving from the west and being significantly modified as it travels coastward passing San Clemente and Santa Catalina islands.

Vesecky, J. F.↗
NASA NTRS1982

Evaluation of methods for characterizing surface topography of models for high Reynolds number wind-tunnels

Current work by the National Bureau of Standards at the NASA National Transonic Facility (NTF) to evaluate the performance of stylus instruments for determining the topography of models under investigation is described along with instrumentation for characterization of the surface microtopography. Potential areas of surface effects are reviewed, and the need for finer surfaced models for the NTF high Reynolds number flows is stressed. Current stylus instruments have a radii as large as 25 microns, and three models with surface finishes of 4-6, 8-10, and 12-15 micro-in. rms surface finishes were fabricated for tests with a stylus with a tip radius of 1 micron and a 50 mg force. Work involving three-dimensional stylus profilometry is discussed in terms of stylus displacement being converted to digital signals, and the design of a light scattering instrument capable of measuring the surface finish on curved objects is presented.

Teague, E. C.↗
NASA NTRS1982

Overview of the IMS July 29, 1977, magnetic storm analysis

The physical characteristics and temporal development of a significant IMS magnetospheric event - the sudden commencement and multiple substorms of July 29, 1977 - are reviewed. It is pointed out that the ring current showed a maximum at 0600 UT and a major perturbation at 1230 UT, corresponding to the last substorm. The computerized coordinated data analysis workshop (CDAW 2) conducted in October 1979 is described. Attention is given to the solar wind conditions and magnetospheric response.

Manka, R. H.↗
NASA NTRS1983

Surface finish measurement studies

The performance of stylus instruments for measuring the topography of National Transonic Facility (NTF) model surfaces both for monitoring during fabrication and as an absolute measurement of topography was evaluated. It was found that the shop-grade instruments can damage the surface of models and that their use for monitoring fabrication procedures can lead to surface finishes that are substantially out of range in critical areas of the leading edges. The development of a prototype light-scattering instrument which would allow for rapid assessment of the surface finish of a model is also discussed.

Teague, E. C.↗
NASA NTRS1982

The Satellite Situation Center

Considerations related to the early planning for the International Magnetospheric Study (IMS) took into account the desirability of an establishment of specific entities for generating and disseminating coordination information for both retrospective and predictive periods. The organizations established include the IMS/Satellite Situation Center (IMS/SSC) operated by NASA. The activities of the SSC are related to the preparation of reports on predicted and actually achieved satellite positions, the response to inquiries, the compilation of information on satellite experiments, and the issue of periodic status summaries. Attention is given to high-altitude satellite services, other correlative satellite services, non-IMS activities of the SSC, a summary of the SSC request activity, and post-IMS and future activities.

Teague, M. J.↗
NASA NTRS1982

The origin and evolution of the coordinated data analysis workshop process

During the planning stage for the International Magnetospheric Study (IMS), it was stressed that coordinated observations among various satellites and among satellite, ground-based, balloon, and rocket (GBR) experiments were essential in obtaining the required observational data base. In the course of operating the Satellite Situation Center (SSC), it was found to be desirable to assemble a problem-oriented digital data base, consisting of a large number of physical parameters obtained from satellite and GBR sensors, in a computer system which would permit a large number of scientists to manipulate, display, discuss, study and analyze the data together in a coordinated manner. It was felt that such a process might shorten the time required to gain full scientific understanding of the observations. This approach was called the Coordinated Data Analysis Workshop (CDAW) process. Attention is given to the preliminary concept, the the initial implementation of the CDAW process, and aspects of subsequent evolution.

Vette, J. I.↗
NASA NTRS1982

Three-dimensional stylus profilometry

The method of three-dimensional stylus profilometry is presented together with a computer-based system for transforming the surface topography of a specimen into an intensity image. Examples are given in which intensity images obtained by stylus profilometry are compared with scanning electron micrographs and two other representations of the stylus data. The comparisons are made for three types of surface irregularities: a discrete feature, a periodic profile surface, and a random profile surface. It is shown that stylus profilometry provides high vertical resolution for low sloped surfaces and thus can be useful in revealing features not easily detectable with other methods.

Teague, E. C.↗
NASA NTRS1984

Surface roughness studies with DALLAS-detector array for laser light angular scattering

An attempt is made to develop a better mathematical description of optical scattering phenomena, in order to construct an optical scattering apparatus for reliable and routine measurements of roughness parameters without resorting to comparator standards. After a brief outline of optical scattering theory, a description is presented of an experimental instrument for measuring surface roughness which incorporates optical scattering principles. The instrument has a He-Ne laser which illuminates the test surface at a variable angle of incidence. Scattered light distribution is detected by an array of 87 fiber-optic sensors positioned in a rotating semicircular yoke. The output from the detector is digitized and analyzed in a laboratory computer. For a comparison with experimental data, theoretical distributions are calculated by substituting the roughness profiles into the operand of and integral equation for electromagnetic scattering developed by Beckmann and Spizzichino (1963). A schematic diagram of the instrument is provided and the general implications of the experimental results are discussed.

Vorburger, T. V.↗
NASA NTRS1985

Surface texture characterization by angular distributions of scattered light

Work at the National Bureau of Standards to develop an on-line optical measurement device and attendant algorithms for automated optical scattering measurements of machined metal surfaces are described. The surfaces could be milled, ground or lapped, and the system is intended to categorize the resulting surface characteristics. The optical device consists of a He-Ne laser which is shone on a surface. The scattered light is captured by a semicircular array of 87 detector elements rotated over the scanned area. The light signals are processed through a digital voltmeter and then an A/D converter. The signals are then stored for later comparisons with optical scattering data obtained by optical instruments used with stylus instruments for characterizing surface topographies. A theoretical model has been defined which relates light scattering and the characteristics of the surface roughness. Initial experimental results with a sinusoidal surface have indicated that although the system can follow the trend of the roughness, the roughness amplitude is as yet uncertainly defined and the computations require excessive time.

Gilsinn, D. E.↗
NASA NTRS1986

Ultranarrowband searches for extraterrestrial intelligence with dedicated signal-processing hardware

An evaluation is made of the prospects for SETI applications of multichannel spectroscopy, assuming narrowband RF beacon transmission, with a mHz resolution that matches interstellar medium properties. Receiver Doppler corrections must furnish substantial interference rejection. Results are presented from an Arecibo antenna search of 250 sunlike stars at 1.4 and 2.8 GHz. A meridian transit search of the northern sky is also in progress with the Harvard-Smithsonian 26-m antenna.

Horowitz, P.↗