Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thermal characteristics identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Combustion Dynamic Characteristics Identification in a 9-point LDI Combustor Under Choked Outlet Boundary Conditions

Combustion dynamics data were collected at the NASA Glenn Research Center's CE-5 flame tube test facility under combustor outlet choked conditions. Two 9-point Swirl-Venturi Lean Direct Injection (SV-LDI) configurations were tested in a rectangular cuboid combustor geometry. Combustion dynamic data were measured at different engine operational conditions up to inlet air pressure and temperature of 24.13 bar and 828 K, respectively. In this study, the effects of acoustic cavity resonance, precessing vortex core (PVC), and non-uniform thermal expansion on the dynamic noise spectrum are identified by comparing the dynamic data that collected at various combustor inlet conditions along with combustor geometric calculations. The results show that the acoustic cavity resonance noises were seen in the counter-rotating pilot configuration but not in the co-rotating pilot configuration. Dynamic pressure noise band at around 0.9 kHz was only detected at the P'41 location (9.8 cm after fuel injector face) but not at the P'42 location (29 cm after the fuel injector face); the amplitude of this noise band depended on the thermal expansion ratio (T4/T3). The noise band at around 1.8 kHz was found to depend on the inlet air pressure or the air density inside the combustor. The PVC frequency was not observed in these two configurations.

lean direct injection↗
NASA NTRS1999

Method and Apparatus for the Portable Identification of Material Thickness and Defects Using Spatially Controlled Heat Application

A method and a portable apparatus for the nondestructive identification of defects in structures. The apparatus comprises a heat source and a thermal imager that move at a constant speed past a test surface of a structure. The thermal imager is off set at a predetermined distance from the heat source. The heat source induces a constant surface temperature. The imager follows the heat source and produces a video image of the thermal characteristics of the test surface. Material defects produce deviations from the constant surface temperature that move at the inverse of the constant speed. Thermal noise produces deviations that move at random speed. Computer averaging of the digitized thermal image data with respect to the constant speed minimizes noise and improves the signal of valid defects. The motion of thermographic equipment coupled with the high signal to noise ratio render it suitable for portable, on site analysis.

Cramer, K. Elliott↗
NASA NTRS2001

Search for the Identification of 3EG J1835+5918: Evidence for a New Type of High-Energy Gamma-Ray Source

The EGRET source 3EG J1835+5918 is the brightest and most accurately positioned of the as-yet unidentified high-energy gamma-ray sources at high Galactic latitude (l, b = 89 deg, 25 deg). We present a multiwavelength study of the region around it, including X-ray, radio, and optical imaging surveys, as well as optical spectroscopic classification of most of the active objects in this area. Identifications are made of all but one of the ROSAT and ASCA sources in this region to a flux limit of approximately 5 x 10(exp -14) erg/sq cm s, which is 10(exp -4) of the gamma-ray flux. The identified X-ray sources in or near the EGRET error ellipse are radio-quiet QSOs, a galaxy cluster, and coronal emitting stars. We also find eight quasars using purely optical color selection, and we have monitored the entire field for variable optical objects on short and long time scales without any notable discoveries. The radio sources inside the error ellipse are all fainter than 4 mJy at 1.4 GHz. There are no flat-spectrum radio sources in the vicinity; the brightest neighboring radio sources are steep-spectrum radio galaxies or quasars. Since no blazar-like or pulsar-like candidate has been found as a result of these searches, 3EG J1835+5918 must be lacking one or more of the physically essential attributes of these known classes of gamma-ray emitters. If it is an AGN it lacks the beamed emission radio of blazars by at least a factor of 100 relative to identified EGRET blazars. If it is an isolated neutron star, it lacks the steady thermal X-rays from a cooling surface and the magnetospheric non-thermal X-ray emission that is characteristic of all EGRET pulsars. If a pulsar, 3EG J1835+5918 must be either older or more distant than Geminga, and probably an even more efficient or beamed gamma-ray engine. One intermittent ROSA T source falls on a blank optical field to a limit of B greater than 23.4, V greater than 23.3, and R greater than 22.5. In view of this conspicuous absence, RX J1836-2+5925 should be examined further as a candidate for identification with 3EG J1835+5918 and possibly the prototype of a new class of high-energy gamma-ray source.

Mirabal, N.↗
NASA NTRS2004

Lunar and Planetary Science XXXV: Mars Mineralogy: Weathered and Dry

The session "Mars Mineralogy: Weathered and Dry" presented the following reports:Hyperspectral and Field Mapping of an Archaean Komatiite Unit in the Pilbara Craton, Western Australia: Applications for CRISM Mission; Emission Spectroscopy of Smectites: Implications for the TES Andesite-weathered Basalt Debate; Volcanism and/or Aqueous Alteration on Mars: Constraints on Distinguishing Glass and Phyllosilicate in the Thermal Infrared; Olivine Weathering on Mars: Getting Back to Basics; Sulfate-cemented Soils Detected in TES Data Through the Application of an Automated Band Detection Algorithm; Thermal Emission Spectroscopy of Sulfates: Possible Hydrous Iron-Sulfate in the Soil at the MER-A Gusev Crater Landing Site ; Barite and Celestine Detection in the Thermal Infrared: Possible Application to Determination of Aqueous Environments on Mars; Search for Evaporite Minerals in Flaugergues Basin, Mars; Contributions from Hydrated States of MgSO4 to the Reservoir of Hydrogen at Equatorial Latitudes on Mars; Identification of a Quartz and Na-Feldspar Surface Mineralogy in Syrtis Major; Pigeonite Masquerading as Olivine at Mars: First Results from Mars Spectroscopy Consortium; Green Mars: Geologic Characteristics of Olivine-bearing Terrains as Observed by THEMIS, MOC, and MOLA; and Global Chemical Abundances and Distributions on Mars from MGS-TES Spectra.

Source record↗
NASA NTRS1995

Plasma wave evidence for lightning on Venus

Plasma wave data from the Pioneer Venus Orbiter provide the largest body of data cited as evidence for lightning on Venus. These data are also the most controversial, mainly because of the ambiguity in mode identification due to limited spectral information. We review some of the more recent studies of the plasma wave data at Venus, and we demonstrate that the characteristics of the 100 Hz waves are consistent with whistler-mode waves propagating vertically from below the ionosphere. We further show that in situ instabilities are too weak to generate whistler-mode waves, mainly because the thermal pressure is comparable with the magnetic field pressure in the ionosphere of Venus. The lower hybrid drift instability has also been suggested as an alternative source for the 100 Hz waves. However, the wave properties are more consistent with whistler-mode propagation; the lower hybrid dirft instability requires very short gradient scale lengths to overcome damping due to collisions. We also note that an apparent association between Langmuir probe anomalies and 100 Hz waves is much lower than previously reported, once we apply a consistent intensity threshold for identifying wave bursts. The lightning hyposthesis remains the most probable explanation of the plasma waves detected at low altitudes in the nightside ionosphere of Venus.

Strangeway, Robert J.↗
NASA NTRS1988

A two component model for thermal emission from organic grains in Comet Halley

Observations of Comet Halley in the near infrared reveal a triple-peaked emission feature near 3.4 micrometer, characteristic of C-H stretching in hydrocarbons. A variety of plausible cometary materials exhibit these features, including the organic residue of irradiated candidate cometary ices (such as the residue of irradiated methane ice clathrate, and polycyclic aromatic hydrocarbons. Indeed, any molecule containing -CH3 and -CH2 alkanes will emit at 3.4 micrometer under suitable conditions. Therefore tentative identifications must rest on additional evidence, including a plausible account of the origins of the organic material, a plausible model for the infrared emission of this material, and a demonstration that this conjunction of material and model not only matches the 3 to 4 micrometer spectrum, but also does not yield additional emission features where none is observed. In the case of the residue of irradiated low occupancy methane ice clathrate, it is argued that the lab synthesis of the organic residue well simulates the radiation processing experienced by Comet Halley.

Chyba, Christopher↗
NASA NTRS1974

Simulation of lunar carbon chemistry. II - Lunar winds contribution

Simulation experiments, computations, and analysis of glassy agglutinates show that a directly condensed lunar wind vapor phase is strongly depleted in carbon and sulfur compounds and may recrystallize rapidly in the lunar thermal cycle and separate from host crystals. Factors preventing identification of low-energy species implanted from the lunar atmosphere are discussed. Computational results indicate that the implanted lunar winds carbon originates both from the vapor phases injected into the lunar atmosphere during thermal metamorphism of mature lunar soil grains and from direct volatization of impacting micrometeorites. It is suggested that microglass splashes and tiny crystalline grains possibly attached to the surface of coarser grains do not affect the characteristics of solar wind carbon chemistry in the lunar soil.

Bibring, J. P.↗
NASA NTRS1980

Research in the application of spectral data to crop identification and assessment, volume 2

The development of spectrometry crop development stage models is discussed with emphasis on models for corn and soybeans. One photothermal and four thermal meteorological models are evaluated. Spectral data were investigated as a source of information for crop yield models. Intercepted solar radiation and soil productivity are identified as factors related to yield which can be estimated from spectral data. Several techniques for machine classification of remotely sensed data for crop inventory were evaluated. Early season estimation, training procedures, the relationship of scene characteristics to classification performance, and full frame classification methods were studied. The optimal level for combining area and yield estimates of corn and soybeans is assessed utilizing current technology: digital analysis of LANDSAT MSS data on sample segments to provide area estimates and regression models to provide yield estimates.

Daughtry, C. S. T.↗
NASA NTRS1993

Regional mantle upwelling on Venus: The Beta-Atla-Themis anomaly and correlation with global tectonic patterns

The morphology and global distribution of volcanic centers and their association with other geological characteristics offers significant insight into the global patterns of geology, tectonic style, thermal state, and interior dynamics of Venus. Magellan data permit the detailed geological interpretation necessary to address questions about interior dynamics of Venus particularly as they reflect relatively physical, chemical, and thermal conditions of the interior. This paper focuses on the distribution of anomalous concentrations of volcanic centers on Venus and regional patterns of tectonic deformation as it may relate to the identification of global internal anomalies, including mantle dynamic, petrological, or thermal patterns.

Crumpler, L. S.↗
NASA NTRS2019

Properties of Rubble-Pile Asteroid (101955) Bennu from OSIRIS-REx Imaging and Thermal Analysis

Establishing the abundance and physical properties of regolith and boulders on asteroids is crucial for understanding the formation and degradation mechanisms at work on their surfaces. Using images and thermal data from NASA's Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft, we show that asteroid (101955) Bennu's surface is globally rough, dense with boulders, and low in albedo. The number of boulders is surprising given Bennu's moderate thermal inertia, suggesting that simple models linking thermal inertia to particle size do not adequately capture the complexity relating these properties. At the same time, we find evidence for a wide range of particle sizes with distinct albedo characteristics. Our findings imply that ages of Bennu's surface particles span from the disruption of the asteroid's parent body (boulders) to recent in situ production (micrometre-scale particles).

DellaGiustina, D. N.↗
NASA NTRS2020

Volatile-rich Asteroids in the Inner Solar System

Bennu (101195), target of the Origins, Spectral Interpretation, Resource Identification, Security, Regolith Explorer (OSIRIS-REx) mission, is a type-B asteroid with abundant spectral evidence for hydrated silicates, low thermal inertia “boulders” and frequent bursts of particle emission. We suggest that Bennu’s parent body formed in the outer solar system before it was perturbed into the asteroid belt and then evolved into a near-Earth object. We show that this is consistent with models of planetesimal evolution. Bennu has many characteristics expected for a dormant comet, and could potentially contain a minimum of 1 wt.% adsorbed water if its gross mineralogy is consistent with the Orgueil meteorite. This is in addition to any ice or water contained within the hydrous minerals themselves. Based on this hypothesis, we predict the properties of the samples that will be returned to Earth by the OSIRIS-REx mission, including abundant phyllosilicate minerals, amorphous hydrated silicates and low-density, very high-porosity aggregates, already observed by the OSIRIS-REx instrument suite. We predict enrichments in D/H and 15N/14N, high C/Mg ratios (>∼7 wt%), and a greater range of organic compositions than found in meteorites, including an organic component poor in aromatics, and a more labile organic fraction. Ammonium salts, ranging from NH4Cl to ammonium–organic acid salts could carry much of the nitrogen in comets, yet only NH4CH3COO and heavier salts are sufficiently stable to be found in these returned samples. Water adsorbed onto highly porous grains should also be detected provided that the sample return capsule remains below 300 K during Earth return, and this water should be isotopically heavy.

Joseph A. Nuth, III↗
NASA NTRS1983

Character and stability of axisymmetric thermal convection in spheres and spherical shells

The influence of shell size and mode of heating on the behavior and stability of axisymmetric, infinite Prandtl number convection in a spherical geometry is studied. Heating from within and below features convection onset governed by a self-adjoint system of equations and boundary conditions. For heating only from within or from below, linearized equations and boundary conditions are non-self-adjoint. Identification of the parameter which initiates the departure from self-adjointness, together with the properties of the self-adjoint solution, provide a basis for calculating the heat transfer characteristics of the non-self-adjoint situations. The investigations are an effort to develop a model for heat transfer in planetary interiors. Further development of the technique by modifying the Galerkin method by the introduction of diagonal mode truncation is suggested to permit the consideration of higher values of the Rayleigh numbers, i.e., those more commensurate with terrestrial planet mantles.

Zebib, A.↗
NASA NTRS1984

A deployable structure and solar array controls experiment for STEP

A candidate configuration for a controls experiment on the Space Technology Experiments Platform (STEP) is described. The elements of the experiment are the mast, the solar array, and an articulation module between the two. The characteristic dimensions are very compatible for integration on a pallet such a STEP's proposed configuration. The controls' objective would be the measurement of orbiter interaction as well as the system identification of the appendages. The flight experiment configuration would also provide a test bed for various active vibration controls concepts. The instrumentation being considered would measure accelerations, strains, displacements, and temperatures. The deployable mast has eight elements defining a structural bay. Uniaxial measurements would be required to define loads at a cross section of the structure. Displacements due to thermal distortion of the mast and the local state of the solar concentrator may be measured by an optical ranging technique from the orbiter aft flight deck.

Nishimoto, T. S.↗
NASA NTRS1983

Optical characteristics of young quasars as sources of the cosmic X-ray background

The sources which dominate the thermal cosmic X-ray background cannot have X-ray spectra similar to the power laws measured for bright active galactic nuclei. The optical consequences of this disparity are pursued by considering a standard model for the photoexcitation and heating of the line emitting gas surrounding a central source (e.g., such as a quasar). The optical line emission to be associated with compact young quasar sources having the same X-ray spectrum as the X-ray background is found to be substantially different from that characteristic of typical quasars. Implications on quasar source counts and the identification of such new objects are discussed.

Boldt, E.↗
NASA NTRS1994

Magnetite: What it reveals about the origin of the banded iron formations

Magnetite, Fe3O4 is produced abiotically and biotically. Abiotically, magnetite is a late magmatic mineral and forms as a consequence of the cooling of iron rich magma. Biotically, magnetite is produced by several organisms, including magnetotactic bacteria. Hematite, Fe2O3, is also produced abiotically and biotically. Abiotically, hematite rarely occurs as a primary mineral in igneous rocks, but is common as an alteration product, fumarole deposit, and in some metamorphosed Fe-rich rocks. Biotically, hematite is produced by several types of microorganisms. Biologically-produced magnetite and hematite are formed under the control of the host organism, and consequently, have characteristics not found in abiotically produced magnetite and hematite crystals. To determine if the magnetite and hematite in the Banded Iron Formation was biologically or abiotically produced, the characteristics of biologically-produced magnetite and hematite (concentrated from Aquaspirillum magnetotacticum) and abiotically-produced magnetite and hematite obtained from Wards Scientific Supply Company, were compared with characteristics of magnetite and hematite concentrated from the Gunflint Banded Iron Formation (Ontario, Canada) using thermal and crystallographic analytical techniques. Whole rock analysis of the Gunflint Banded Iron Formation by x-ray diffraction (XRD) and differential thermal analysis (DTA) revealed the presence of quartz, hematite, siderite and dolomite as the major minerals, and magnetite, greenalite, pyrite, pyrrhotite and apatite as the minor minerals. Analysis of a crude magnetic fraction of the Gunflint showed the minerals quartz, hematite, siderite, dolomite, and magnetite. Analysis of the crude magnetic fraction from Aquaspirillum magnetotacticum revealed organic compounds plus hematite and magnetite. The mineral identification and particle size distribution data obtained from the DTA along with XRD data indicate that the magnetite and hematite from the Gunflint BIF share some similarities with biologically formed magnetite and hematite.

Schwartz, D. E.↗
NASA NTRS1984

Optical characteristics of young quasars as sources of the cosmic X-ray background

The sources which dominate the thermal cosmic X-ray background cannot have X-ray spectra similar to the power laws measured for bright active galactic nuclei. The optical consequences of this disparity are pursued by considering a standard model for the photoexcitation and heating of the line-emitting gas surrounding a central source (e.g., such as a quasar). The optical line emission to be associated with compact young quasar sources having the same X-ray spectrum as the X-ray background is found to be substantially different from that characteristic of typical quasars. Implications on quasar source counts and the identification of such new objects are discussed.

Boldt, E.↗
NASA NTRS1988

Physical properties of asteroids

Infrared photometry at 1.2, 1.6 and 2.2 micrometer provides a relatively rapid and accurate method for the classification of asteroids and is important for comparison with laboratory measurements of meteorites and other possible compositional analogues. Extension beyond the visual is espicially useful for minerals which have strong characteristic infrared colors such as olivine in the A class asteroids. Radiometry at long infrared wavelengths is important for deriving basic physical parameters (via thermal models) such as size and albedo which in turn enables the conversion of relative colors to absolute reflectances. In particular, albedos are the only way to distinguish among the otherwise ambiguous E, M and P classes of asteroids. Infrared observations of 15 asteroids were made at the NASA infrared Telescope Facility (IRTF) on Mauna Kea in 1987. Researchers completed the analysis of 22 Aten, Apollo and Amor asteroids. Results include albedos and diameters for these objects as well as the identification of the first known class M and Class E near-Earth asteroids. The standard thermal model appears to be inadequate for some of these small asteroids because of their coarse regolith, so researchers constructed a rotating thermal model for such asteroids. They have identified a subtle systematic difference between the sub-populations of large and small IRAS asteroids as well as several anomalous objects.

Veeder, Glenn J.↗
NASA NTRS2012

G-LiHT: Goddard's LiDAR, Hyperspectral and Thermal Airborne Imager

Scientists at NASA's Goddard Space Flight Center have developed an ultra-portable, low-cost, multi-sensor remote sensing system for studying the form and function of terrestrial ecosystems. G-LiHT integrates two LIDARs, a 905 nanometer single beam profiler and 1550 nm scanner, with a narrowband (1.5 nanometers) VNIR imaging spectrometer and a broadband (8-14 micrometers) thermal imager. The small footprint (approximately 12 centimeters) LIDAR data and approximately 1 meter ground resolution imagery are advantageous for high resolution applications such as the delineation of canopy crowns, characterization of canopy gaps, and the identification of sparse, low-stature vegetation, which is difficult to detect from space-based instruments and large-footprint LiDAR. The hyperspectral and thermal imagery can be used to characterize species composition, variations in biophysical variables (e.g., photosynthetic pigments), surface temperature, and responses to environmental stressors (e.g., heat, moisture loss). Additionally, the combination of LIDAR optical, and thermal data from G-LiHT is being used to assess forest health by sensing differences in foliage density, photosynthetic pigments, and transpiration. Low operating costs (approximately $1 ha) have allowed us to evaluate seasonal differences in LiDAR, passive optical and thermal data, which provides insight into year-round observations from space. Canopy characteristics and tree allometry (e.g., crown height:width, canopy:ground reflectance) derived from G-LiHT data are being used to generate realistic scenes for radiative transfer models, which in turn are being used to improve instrument design and ensure continuity between LiDAR instruments. G-LiHT has been installed and tested in aircraft with fuselage viewports and in a custom wing-mounted pod that allows G-LiHT to be flown on any Cessna 206, a common aircraft in use throughout the world. G-LiHT is currently being used for forest biomass and growth estimation in the CONUS and Mexico in support of NASA's Carbon Monitoring System (CMS) and AMIGA-Carb (AMerican Icesat Glas Assessment of Carbon). For NASA's CMS, wall-to-wall G-LiHT data have been acquired over intensive study sites with historic LiDAR datasets, dense inventory data, stem maps and flux tower observations. For AMIGA-Carb, G-LiHT transects have been acquired over ICESat tracks and USDA-FS inventory plots throughout the CONUS, and similar data will be acquired in Mexico during 2013. This talk will highlight recent science results from continental-scale transects landscape-scale deployments of G-LiHT, as well as seasonal forest dynamics from repeat pass G-LiHT acquisitions.

Cook, Bruce↗