SEARCH · Search NASA
Results for “Thermogravimetric analysis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Kinetics of TATB and LX-17 Decomposition by Thermal Analysis
The kinetics of TATB decomposition have been investigated by thermal analysis (thermogravimetric analysis, TGA, and differential scanning calorimetry, DSC) at both LLNL and the University of Alabama Birmingham. This report summarizes progress in understanding from those results within the context of identifying the global reaction mechanism, i.e., sequential, autocatalytic, competitive, or some mixture thereof. A particularly important issue is how pressure affects both the reaction rate and enthalpy. The effect of pressure helps identify dominant mechanisms and construct and constrain a global mechanism that will work over a wide range of conditions. This memorandum is simply a snapshot of current progress and not a definitive interpretation. I have written it to organize work of others and my interpretations in a systematic manner with the intention of stimulating further advances in understanding. SDT data comes from Jen Montgomery at LLNL, and high-pressure DSC comes from Victoria Stanford and Sergey Vyazovkin at University of Alabama at Birmingham. Major observations and conclusions, some new and some not, are (1) outgassing below 150 °C prior to decomposition releases adsorbed water vapor, (2) outgassing between 150 and 250 °C may come primarily from intercalated water (3) initial thermal decomposition above 250 °C or so involves dehydration of TATB to create furazans, (4) quickly heating to higher temperatures in open pans with flowing gas leads primarily to TATB evaporation between 270 and 390 °C, (5) using a pinhole crucible at atmospheric pressure largely eliminates TATB sublimation, (6) at typical thermal analysis heat rates, the main stage of decomposition is described by a single mass loss process, and decomposition of residual material is spread over a wide range of thermal severity, (7) at typical thermal analysis heat rates and constant temperatures above 300 °C, heat release occurs in two overlapping peaks, with the first one a little faster than mass loss and the second on a little slower than mass loss, (8) total heat release increases significantly with heating rate and substantially with increased pressure, and (9) isothermal experiments at 340 °C indicate that the first exotherm increases by more with LX-17 than TATB, which suggests a possible chemical role of Kel-F decomposition.
Semiconducting polymers for gas detection
Conjugated polyenes, and polyesters containing phthalocyanine in their backbone, were synthesized. These polymers were characterized by chemical analysis, thermogravimetric analysis, spectral analysis, and X-ray diffraction studies for crystallinity, as well as for their film-forming capability and gas/polymer interactions. Most of the polymers were relatively insensitive to water vapor up to 50 percent relative humidity, but the polyester/phthalocyanine (iron) polymer was relatively insensitive up to 100 percent RH. On the other hand, poly(p-dimethylaminophenylacetylene) was too conductive at 100 percent RH. Of the gases tested, the only ones that gave any evidence of interacting with the polymers were SO2, NOx, HCN and NH3. Poly(imidazole)/thiophene responded to each of these gases at all relative humidities, while the other polymers gave varying response, depending upon the RH. Thus, since most of these gases were electron-accepting, the electron-donating character of poly(imidazole)/thiophene substantiates the concept of electronegativity being the operating principle for interaction effects. Of the six polymers prepared, poly(imidazole)/thiophene first showed a very good response to smoldering cotton, but it later became nonresponsive; presumably due to oxidation effects.
Development of Methods of Characterizing Coal in Its Plastic State
Coal in its plastic state (typically 400-460 C) was examined by the isothermal Gieseler plastometry of seven selected coals of widely varying plastic properties. Kinetic models were proposed for the isothermal plastometric curves. Plastic behavior was compared with a variety of laboratory analyses and characterizations of these coals, including classical coal analysis; mineral analysis; microstructural analysis (extractable fractions, surface area measurement, and petrographic analysis); and thermal analysis (thermogravimetric analysis, thermomechanical analysis, and differential scanning calorimetry). The phenomenon of a sharp, large, poorly reproducible exotherm in the differential scanning calorimetric analysis of coking coals was examined. Several coal extrudates show mineral distribution, organic maceral composition and overall calorific value to be little affected by 800 F extrusion. Volatile matter and plastic properties are moderately reduced, and the network structure (as gauged by extractables) appears to be slightly degraded in the extrusion process.
Low temperature synthesis of monolithic transparent Ta2O5 gels from hydrolysis of metal alkoxide
Tantalum oxide gels in the form of transparent monoliths and powder were prepared from hydrolysis of tantalum pentaethoxide under controlled conditions using different mole ratios of Ta(OC2H5)5:C2H50H:H20:HCl. Alcohol acts as the mutual solvent and HCl as the deflocculating agent. For a fixed alkoxide:water:HCl ratio, time of gel formation increased with the alcohol to alkoxide mole ratio. Thermal evolution of the physical and structural changes in the gel was monitored by differential thermal analysis, thermogravimetric analysis, x-ray diffraction, and infrared spectroscopy. On heating to approximately 400 C, the amorphous gel crystallized into the low temperature orthorhombic phase Beta-Ta2O5, which transformed into the high temperature tetragonal phase Alpha-Ta2O5 when further heated to approximately 1450 C. The volume fraction of the crystalline phase increased with the firing temperature. The Alpha-Ta205 converted back into the low temperature phase, Beta-Ta2O5, on slow cooling through the transformation temperature of 1360 C indicating a slow but reversible transformation.
Synthesis and thermal evolution of structure in alkoxide-derived niobium pentoxide gels
Niobium pentoxide gels in the form of transparent monoliths and powder have been synthesized from the controlled hydrolysis and polycondensation of niobium pentaethoxide under different experimental conditions using various mole ratios of Nb(OC2H5)5:H2O:C2H5OH:HCl. Alcohol acted as the mutual solvent and HCl as the deflocculating agent. In the absence of HCl, precipitation of colloidal particles was encountered on the addition of any water to the alkoxide. The gels were subjected to various thermal treatments and characterized by differential thermal analysis, thermogravimetric analysis, x-ray diffraction, and infrared spectroscopy. After drying at 400 C, the gels were amorphous to x-rays. The amorphous powder crystallized into the low-temperature orthorhombic form of Nb2O5 at approximately 500 C, which transformed irreversibly into the high-temperature monoclinic alpha-Nb2O5 between 900 to 1000 C. The kinetics of crystallization of the amorphous niobium pentoxide have been investigated by non-isothermal differential scanning calorimetry. The crystallization activation energy was determined to be 399 kJ/mol.
Synthesis and Characterization of High Performance Polyimides Containing the Bicyclo(2.2.2)oct-7-ene Ring System
Due to the difficulty in processing polyimides with high temperature stability and good solvent resistance, we have synthesized high performance polyimides with bicyclo(2.2.2)-oct-7-ene ring system which can easily be fabricated into films and fibers and subsequently converted to the more stable aromatic polyimides. In order to improve processability, we prepared two polyimides by reacting 1,4-phenylenediamine and 1,3phenylediamine with bicyclo(2.2.2)-7-octene-2,3,5,6-tetracarboxylic dianhydride. The polyimides were characterized by FTIR, FTNMR, solubility and thermal analysis. Thermogravimetric analysis (TGA) showed that the 1,4-phenylenediamine and 1,3-phenylenediamine containing polyimides were stable up to 460 and 379 C, respectively under nitrogen atmosphere. No melting transitions were observed for both polyimides. The 1,4-phenylenediamine containing polyimide is partially soluble in dimethyl sulfoxide, methane sulfonic acid and soluble in sulfuric acid at room temperature. The 1,3-phenylenediamine containing polyimide is partially soluble in dimethyl sulfoxide, tetramethyl urea, N,N-dimethyl acetamide and soluble in methane sulfonic acid and sulfuric acid.
Adsorption of molecular iodine and alkyl iodides from spent-nuclear-fuel-reprocessing off-gas using reduced silver mordenite
Radioactive iodine is a hazardous byproduct of spent-nuclear-fuel reprocessing that must be removed from the off-gas stream before it can be discharged. Reduced silver mordenite (Ag 0 Z) is currently the baseline material for iodine capture in the U.S. Although the performance characteristics and capture mechanisms of I 2 and CH 3 I have been established, similar investigations into long-chain organic iodides have yet to be performed. In this study, thin beds of Ag 0 Z were loaded with I 2 , CH 3 I, C 4 H 9 I, and C 12 H 25 I (5 ppm to 50 ppm) carried in a dry air stream at 150°C. The maximum iodine capacity was 105 ± 5 mg I/g Ag 0 Z for all species. Saturated Ag 0 Z samples were characterized using scanning electron microscopy, X-ray fluorescence, X-ray photoelectron spectroscopy, diffuse reflectance UV–visible spectroscopy, pair distribution function analysis, and thermogravimetric analysis. Further, near-complete Ag utilization and similar physical/chemical properties were observed for all samples. Through a comparison with previous studies and an investigation of aged Ag 0 Z, we propose that iodine species react with Ag + at exchange sites, forming α-AgI within the mordenite channels, and with surface Ag 0 nanoparticles, yielding β-/γ-AgI. The available Ag sites in the interior (Ag + ) and exterior (Ag 0 ) of mordenite determine the adsorption capacity since α-AgI formation is limited by the total pore volume. Potential iodine uptake routes were summarized for aging and non-aging environments. A scalable predictive model was implemented for deep-bed iodine removal, and predictions were in good agreement with experimental data. Sensitivity analysis suggests that iodine uptake kinetics is governed by pore diffusion.
Syntheses and crystal structures of four new d 0 transition metal tellurites
Four new d 0 transition metal tellurites, namely InVTeO 6 (1), β-InVTe 2 O 8 (2), FeVTe 2 O 8 (3), and Fe 2 MoTe 2 O 10 (4), were synthesized under hydrothermal conditions, and their crystal structures were determined using single-crystal X-ray diffraction. Compound 1 crystallizes in the noncentrosymmetric space group P2 1 2 1 2 1 (No. 19), with unit cell parameters of a = 5.0759(2) Å, b = 8.5030(3) Å, c = 11.6376(5) Å, V = 502.28(3) Å 3 , and Z = 4, while the other three compounds crystallize in centrosymmetric structures, with space group Cmca and unit cell parameters of a = 7.0633(7) Å, b = 8.962(1) Å, c = 20.162(2) Å, V = 1276.3(2) Å 3 , and Z = 8 for compound 2, space group P2 1 /n and unit cell parameters of a = 7.8901(2) Å, b = 4.9617(1) Å, c = 16.4290(3) Å, β = 93.6198(8)°, V = 641.88(2) Å 3 , and Z = 4 for compound 3, and space group Pnma and unit cell parameters of a = 8.7878(2) Å, b = 6.1327(2) Å, c = 15.2423(4) Å, V = 821.45(4) Å 3 , and Z = 4 for compound 4. Compound 3 adopts a two-dimensional (2D) sheet structure composed of FeO 6 octahedra, VO 4 tetrahedra, and TeO 4 polyhedra. The other three compounds exhibit three-dimensional (3D) framework structures: Compound 1 is built from InO 6 octahedra, VO 4 tetrahedra, TeO 4 polyhedra; Compound 2 consists of InO 6 octahedra, VO 5 square pyramids, and TeO 3 polyhedra; and Compound 4 is composed of FeO 6 octahedra, MoO 6 octahedra, and TeO 3 polyhedra. The band structures, density of states, and electron localization functions of all four compounds were calculated. The vibrational spectra were examined for compounds 1, 2, and 4. Furthermore, powder X-ray diffraction, element analysis, and thermogravimetric analysis were conducted for compound 4.
High-Temperature Thermodynamics of Cerium Silicates, A-Ce 2 Si 2 O 7 , and Ce 4.67 (SiO 4 ) 3 O
Lanthanide disilicates and oxyapatites have potential roles in high temperature applications as thermal (TBC) and environmental barrier coatings (EBC), or possible alteration phases in geological nuclear waste repositories. However, those Ce 3+ -bearing silicates have only been limitedly studied. In this work, we performed detailed structural and thermodynamic investigations on A-Ce 2 Si 2 O 7 (tetragonal, P4 1 ) and Ce 4.67 (SiO 4 ) 3 O (hexagonal, P6 3 /m). The high temperature structural behaviors and coefficients of thermal expansion were determined by in situ high temperature synchrotron X-ray diffraction (HT-XRD) implemented with Rietveld analysis and thermogravimetric analysis coupled with differential scanning calorimetry (TGA-DSC). A-Ce 2 Si 2 O 7 was found to be stable in N 2 and air up to ~1483 K with anisotropic thermal expansion along the a and c axes (α a = 12.3 × 10 -6 K -1 and α c = 12.4 × 10 -6 K -1 ). Ce 4.67 (SiO 4 ) 3 O had a slow partial oxidation between 533 K and 873 K to a new nonstoichiometric phase Ce 3+ 1.67- xCe4 + x Ce 3+ 3 (SiO 4 ) 3 O 1+0.5x , followed by a thermal decomposition to CeO 2 and SiO 2 at ~1000 K in air. By using high temperature oxide melt solution calorimetry at 973 K with lead borate as the solvent, the standard enthalpy of formation was determined for A-Ce 2 Si 2 O 7 (-3825.1 ± 6.0 kJ/mol) and Ce 4.67 (SiO 4 ) 3 O (-7391.3 ± 9.5 kJ/mol). Finally, these thermodynamic parameters were compared with those of CeO 2 , CeSiO 4 , and other silicate oxyapatites for examining their chemical stability in high temperature environments relevant for aeronautical applications, mineral formation, and nuclear fuel cycle.
Simultaneous Thermal Analysis of Anion and Cation Exchange Resins
The decomposition reactions of one anion exchange resin (Bio-Rad AG MP-1) and one cerium-loaded cation exchange resin (DOWEX 50W-X8), both in nitrate form, were analyzed using simultaneous thermal analysis methods. Thermogravimetric analysis, dynamic scanning calorimetry, and evolved gas analysis were deployed in combination to probe the temperature profiles, reaction enthalpies, and off-gases from these resins under process-relevant temperature ranges. Analysis indicates that both resins undergo three clear phases during heating. The first is a dehydration step with prominent off-gassing of water, the second is a decomposition step with evolution of several gaseous species, and lastly is a combustion step with a large release of CO 2 . The temperature at which combustion ends varies slightly between AG MP-1 and DOWEX 50W: combustion completed at ~690°C and ~810°C, respectively. For the DOWEX cation resin, the combustion reaction showed greater sensitivity to the availability of oxygen under the test conditions. Both resins displayed broad exotherms during the combustion step of the decomposition, but the DOWEX cation resin demonstrated a 4.5 times higher specific enthalpy than that of the AG MP-1.
Preparation and properties of silane-endcapped polyimide adhesives
Silane-endcapped polyimide high temperature adhesive formulations were prepared by reacting anhydride-terminated poly(amic acid), obtained from benzophenonetetracarboxylic dianhydride and a diamine (3,3'-, 3,4'- or 4,4'-diaminodiphenylmethane and 3,3', 3,4'- or 4,4'-diaminobenzophenone) with varying amounts of gama-aminopropyltriethoxysilane in dimethylacetamide. Resin properties were evaluated by torsional braid analysis and thermogravimetric analysis. Lap shear strengths of some of the adhesive bonds were determined at room temperature and at 177 C before and after ageing at 200 C for 2500 h and after boiling in water for 72 h.
Grain size dependence of thermally induced oxidation in zirconium carbide
Here complementary analytical approaches were employed to probe the effect of grain size on thermally induced oxidation of zirconium carbide (ZrC) utilizing thermogravimetric analysis, differential scanning calorimetry, and Raman spectroscopy, as well as synchrotron-based and laboratory-based X-ray diffraction (XRD) experiments. The oxidation mechanism and phase behavior of nanocrystalline ZrC (grain size ~ 20 nm) were compared with that of the more documented microcrystalline ZrC (grain size ~ 1 µm). Synchrotron XRD at the Advanced Photon Source with a hydrothermal diamond anvil cell (HDAC) used as a sample chamber revealed that the onset of oxidation is at ~ 380 °C for microcrystalline ZrC which is in agreement with previous work. In contrast, the critical oxidation temperature was ~ 330 °C for nanocrystalline ZrC. Additional high-temperature synchrotron XRD experiments at the National Synchrotron Light Source II using a lamp furnace in combination with Raman analysis showed that tetragonal ZrO 2 forms as an initial oxidation product and transforms at higher temperatures to the monoclinic phase. Thermogravimetric analysis (TGA) coupled with differential scanning calorimetry (DSC) confirmed the X-ray results of a lower critical oxidation temperature for the nanocrystalline sample. The phase transformations in the oxide phase with associated critical temperatures were also evident in the thermodynamic data as exothermic heat events.
Embedded Error Bayesian Calibration of Thermal Decomposition of Organic Materials
Organic materials are an attractive choice for structural components due to their light weight and versatility. However, because they decompose at low temperatures relative to tradiational materials they pose a safety risk due to fire and loss of structural integrity. To quantify this risk, analysts use chemical kinetics models to describe the material pyrolysis and oxidation using thermogravimetric analysis. This process requires the calibration of many model parameters to closely match experimental data. Previous efforts in this field have largely been limited to finding a single best-fit set of parameters even though the experimental data may be very noisy. Furthermore the chemical kinetics models are often simplified representations of the true de- composition process. The simplification induces model-form errors that the fitting process cannot capture. In this work we propose a methodology for calibrating decomposition models to thermogravimetric analysis data that accounts for uncertainty in the model-form and experimental data simultaneously. The methodology is applied to the decomposition of a carbon fiber epoxy composite with a three-stage reaction network and Arrhenius kinetics. The results show a good overlap between the model predictions and thermogravimetric analysis data. Uncertainty bounds capture devia- tions of the model from the data. The calibrated parameter distributions are also presented. In conclusion, the distributions may be used in forward propagation of uncertainty in models that leverage this material.
Preparation and characterization of aminated co-solvent enhanced lignocellulosic fractionation lignin as a renewable building block for the synthesis of non-isocyanate polyurethanes
Lignin is a major bioresource from 2nd generation biorefinery process streams and from pulp and paper production that is still severely underutilized nowadays. Its natural polymeric and aromatic structures make it suitable as a potential building block for biopolymer production. Due to the growing environmental and health concerns over conventional polyurethane (PU) manufacturing processes that utilize toxic isocyanates, there is a great interest to develop a non-isocyanate PU (NIPU) route. Herein, we demonstrate a novel strategy that uses highly pure lignin isolated from co-solvent enhanced lignocellulosic fractionation (CELF) pretreatment of poplar wood to produce biobased NIPUs. In this strategy, hardwood poplar is firstly fractionated via a CELF pretreatment to produce a clean lignin stream that is rich in phenolics. The CELF lignin was then aminated by a Mannich reaction, and the aminated CELF lignin was finally reacted with bicyclic carbonates to yield an advanced NIPU. In this work, the structure, mechanical, and thermal properties of these novel NIPUs were elucidated by FTIR, NMR, tensile test, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). The mechanical properties of these lignin based NIPUs could be tuned from highly rigid to elastic polymers by simply modifying the lignin constituents of the polymer. The thermal stabilities of NIPUs were improved because of the addition of aminated lignin, and NIPU containing 55 and 23 wt% lignin showed the highest tensile strength (~1.2 MPa) and elongation at break (~140%), respectively. The results obtained in this study demonstrate that the reaction of cyclic carbonate with aminated lignin represents an interesting pathway for the synthesizing of lignin based NIPU with a relative high lignin content.
Energetics of oxidation and formation of uranium monocarbide
To enable better implementation of uranium monocarbide (UC) as an advanced nuclear fuel for future high-temperature reactors, it is essential to have a thorough knowledge of its thermal and thermodynamic properties under reactor operational conditions. In this work, we studied thermal bulk oxidation of UC by simultaneous thermal analysis consisting of thermogravimetric analysis – differential scanning calorimetry coupled with evolved gas mass spectrometry (TGA-DSC-MS), and we examined the thermodynamic stability of UC using high temperature oxide melt drop solution calorimetry. Further, in air, our studied UC sample (which contains ~5 mol% UO 2 ) was found to undergo a step-wise thermal oxidation process consisting of consecutive oxidations and thermal decomposition reactions: 0.95UC·0.05UO 2 → UO 3 ·0.29(C x O y ) + 0.66CO 2 → UO 3 ·0.20(C x O y ) + 0.09CO 2 → UO 3 ·0.03(C x O y ) + 0.17CO 2 → U 3 O 8 + 0.03CO 2 + 0.166O 2 . DSC was further used to determine the enthalpies of reactions associated with this series of oxidation reactions. Synchrotron X-ray diffraction (XRD) and extended X-ray absorption spectroscopy (EXAFS) were performed to characterize both the long- and short-range structures of UC. The standard enthalpy of formation (ΔH° f ) of UC was determined to be –50.7 ± 10.8 kJ/mol·atom, in good agreement with previous values measured by bomb calorimetry. Lastly, the enthalpic landscape of U-C compounds, including UC, U 2 C 3 , and α-UC 1.94 , were established based on the enthalpy normalized per mole atom, which suggests that U-C phases are thermodynamically stable at lower C/U ratios.
Characterization of Aluminum Metal Powders for Plutonium-238 Program
As part of radioisotope thermoelectric generator (RTG) production for power sources in deep space exploration, Oak Ridge National Laboratory (ORNL) produces plutonium-238 ( 238 Pu). To produce 238 Pu, neptunium-237 ( 237 Np) targets are fabricated at ORNL and subsequently irradiated at the High Flux Isotope Reactor (HFIR) at ORNL and the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). Specifically, current flowsheets utilize neptunium dioxide ( 237 NpO 2 ) targets. Aluminum (Al) powder is blended with 237 NpO 2 target material to improve thermal conductivity during irradiation. The current composition of 237 NpO 2 /Al pellets (i.e., cermets, or ceramic–metallics) is 20% 237 NpO 2 , 70% Al, and 10% void space. Al powders utilized by the 238 Pu program are high-fired under vacuum before blending into targets. The primary objective of this work is to measure the physical, chemical, and thermal properties of Al before and after the high-firing process. Properties of interest include the morphology, surface texture, particle size, crystal phase(s), and thermal conductivity of the material. These properties are measured with existing materials characterization equipment at ORNL, including powder x-ray diffraction (pXRD), scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS), laser flash analysis (LFA), and thermogravimetric analysis (TGA). A secondary objective of this work is to compare the Al powders before and after the high-firing procedure to determine the effects of high-firing on chemical, physical, and thermal properties and to determine the efficacy of the high-firing process.
Microwave-Assisted Catalytic Conversion of Tar Using Iron Catalyst Doped with Ni/La/Ce
The goal of this research is to study the microwave-assisted catalytic dry reforming of toluene using Fe/Al2O3 as a catalyst in the presence of various dopants such as Ni/La/Ce in a conventional fixed-bed reactor. Initial studies show that both CO2 and toluene conversion can be achieved up to 85% at 500 °C. Higher toluene conversion and syngas production was achieved under microwave conditions compared to conventional thermal conditions. The pre and post-reaction catalyst characterizations were performed using X-ray diffraction analysis (XRD) and thermogravimetric analysis (TGA). The tar analysis was performed using gas chromatography–mass spectrometry (GC-MS). The product gas mainly consisted of H2, CO, methane, propane, ethylene, and ethane along with small amounts of benzene, and naphthalene. The production of benzene indicates the hydrodemethylation (HDM) process of toluene, which requires hydrogen to initiate the reaction. The reaction pathway was proposed based on the observed product gas.