Search NASA⌕ Search

SEARCH · Search NASA

Results for “Time Dependent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Time-dependent boundary-layer response in a propeller slipstream

The time-dependent behavior of a wing boundary layer immersed in a propeller slipstream has been studied experimentally in wind-tunnel tests and in flight. Hot-wire anemometer measurements were made through the boundary layer for time-dependent, ensemble-average velocity and turbulence-intensity profiles at various chord locations. The boundary layer has a coherent, time-dependent cycle of transitional behavior, varying from a laminar to a turbulent-transitional state. Local drag coefficients determined from the velocity profiles for the freewheeling propeller case in flight show that the time-dependent drag in the propeller slipstream varies from the undisturbed laminar value to a value less than that predicted for fully turbulent flow. Local drag coefficients determined from the thrusting propeller case in the wind tunnel indicate that the effects of the slipstream are to enhance the stability of the boundary layer and to reduce the drag coefficient in the laminar portion of the cycle below its undisturbed laminar value.

Howard, Richard M.↗
NASA NTRS1992

The simulated features of heliospheric cosmic-ray modulation with a time-dependent drift model. II - On the energy dependence of the onset of new modulation in 1987

Time-dependent heliospheric cosmic-ray modulation for the period 1985-1989 is simulated by means of a time-dependent axially symmetric drift model with an emulated wavy heliospheric neutral sheet (HNS). The model is used to extend previous calculations to other energies in order to study a possible energy-dependence of the onset of new modulation at various radial distances in 1987. The model, with the outward propagating changes of the HNS as the only time-dependent parameters, is found to predict essentially no energy-dependence in the time when new modulation started in the simulated 1987. When a more practical approach in defining 'constant' modulation in 1987 is followed, the present calculations can be interpreted to indicate that the end of the recovery period in 1987 happened progressively earlier and the onset of new modulation progressively later the higher the rigidity of the cosmic rays. This period of relatively unchanged modulation is predicted to last longer with increasing radial distance.

Le Roux, J. A.↗
NASA NTRS1984

Time-dependent model of the Martian atmosphere for use in orbit lifetime and sustenance studies

A time-dependent model of the Martian atmosphere suitable for calculation of long-term aerodynamic effects on low altitude satellites is presented. The atmospheric model is both position dependent, through latitude and longitude effects, and time dependent. The time dependency includes diurnal and seasonal effects, effects of annual motion, long and short term solar activity effects, and periodic dust storm effects. Nine constituent gases are included in the model. Uncertainties in exospheric temperature, turbidity, and turbopause altitude are used to produce bounds on the expected density. A computer model - a Fortran subroutine which, when given the Julian date, Cartesian position of the sun and the spacecraft in aerocentric coordinates, returns the local values of mass density, temperature, scale height, and upper and lower bounds on the mass density is presented.

Culp, R. D.↗
NASA NTRS2024

Time-dependent Photoionization Modeling of Warm Absorbers: High-resolution Spectra and Response to Flaring Light Curves

Time-dependent photoionization modeling of warm absorber (WA) outflows in active galactic nuclei can play an important role in understanding the interaction between WAs and the central black hole. The WA may be out of the equilibrium state because of the variable nature of the central continuum. In this paper, with the help of time dependent photoionization modeling, we study how the WA gas properties change with time and how it reacts to changing radiation fields. Incorporating a flaring incident light curve, we investigate the behavior of WAs using a photoionization code that simultaneously and consistently solves the time-dependent equations of level population, heating and cooling, and radiative transfer. We simulate the physical processes in the gas clouds, such as ionization, recombination, heating, cooling, and the transfer of ionizing radiation through the cloud and present high-resolution time-resolved absorption spectra. We demonstrate that time-dependent radiative transfer is important and the calculations that omit this effect quantitatively and systematically underestimate the absorption. Time-dependent photoionization models provide crucial insights into the characteristics of WAs and can be used to constrain their density and spatial distribution.

Astrophysicists↗
NASA NTRS2024

Time-Dependent Photoionization Modeling of Warm Absorbers: High-Resolution Spectra and Response to Flaring Light Curves

Time-dependent photoionization modeling of warm absorber (WA) outflows in active galactic nuclei can play an important role in understanding the interaction between WAs and the central black hole. The WA may be out of the equilibrium state because of the variable nature of the central continuum. In this paper, with the help of time dependent photoionization modeling, we study how the WA gas properties change with time and how it reacts to changing radiation fields. Incorporating a flaring incident light curve, we investigate the behavior of WAs using a photoionization code that simultaneously and consistently solves the time-dependent equations of level population, heating and cooling, and radiative transfer. We simulate the physical processes in the gas clouds, such as ionization, recombination, heating, cooling, and the transfer of ionizing radiation through the cloud and present high-resolution time-resolved absorption spectra. We demonstrate that time-dependent radiative transfer is important and the calculations that omit this effect quantitatively and systematically underestimate the absorption. Time-dependent photoionization models provide crucial insights into the characteristics of WAs and can be used to constrain their density and spatial distribution.

Dev R. Sadaula↗
NASA NTRS1980

Determination of efficiencies, loss mechanisms, and performance degradation factors in chopper controlled dc vehical motors. Section 2: The time dependent finite element modeling of the electromagnetic field in electrical machines: Methods and applications

The time dependent solution of the magnetic field is introduced as a method for accounting for the variation, in time, of the machine parameters in predicting and analyzing the performance of the electrical machines. The method of time dependent finite element was used in combination with an also time dependent construction of a grid for the air gap region. The Maxwell stress tensor was used to calculate the airgap torque from the magnetic vector potential distribution. Incremental inductances were defined and calculated as functions of time, depending on eddy currents and saturation. The currents in all the machine circuits were calculated in the time domain based on these inductances, which were continuously updated. The method was applied to a chopper controlled DC series motor used for electric vehicle drive, and to a salient pole sychronous motor with damper bars. Simulation results were compared to experimentally obtained ones.

Hamilton, H. B.↗
NASA NTRS1993

Spectral characteristics of time-dependent orbit errors in altimeter height measurements

A mean reference surface and time-dependent orbit errors are estimated simultaneously for each exact-repeat ground track from the first two years of Geosat sea level estimates based on the Goddard Earth model (GEM)-T2 orbits. Motivated by orbit theory and empirical analysis of Geosat data, the time-dependent orbit errors are modeled as 1 cycle per revolution (cpr) sinusoids with slowly varying amplitude and phase. The method recovers the known 'bow tie effect' introduced by the existence of force model errors within the precision orbit determination (POD) procedure used to generate the GEM-T2 orbits. The bow tie pattern of 1-cpr orbit errors is characterized by small amplitudes near the middle and larger amplitudes (up to 160 cm in the 2 yr of data considered here) near the ends of each 5- to 6-day orbit arc over which the POD force model is integrated. A detailed examination of these bow tie patterns reveals the existence of daily modulations of the amplitudes of the 1-cpr sinusoid orbit errors with typical and maximum peak-to-peak ranges of about 14 cm and 30 cm, respectively. The method also identifies a daily variation in the mean orbit error with typical and maximum peak-to-peak ranges of about 6 and 30 cm, respectively, that is unrelated to the predominant 1-cpr orbit error. Application of the simultaneous solution method to the much less accurate Geosat height estimates based on the Naval Astronautics Group orbits concludes that the accuracy of POD is not important for collinear altimetric studies of time-dependent mesoscale variability (wavelengths shorter than 1000 km), as long as the time-dependent orbit errors are dominated by 1-cpr variability and a long-arc (several orbital periods) orbit error estimation scheme such as that presented here is used.

Chelton, Dudley B.↗
NASA NTRS1991

A comparison of three time-dependent wave packet methods for calculating electron-atom elastic scattering cross sections

Three time-dependent wave packet methods for performing elastic scattering calculations from screened Coulomb potentials are compared. The three methods are the time-dependent amplitude density method (TDADM), a Cayley-transform method (CTM), and the Chebyshev propagation method of Tal-Ezer and Kosloff. Both the TDADM and the CTM are based on a time-dependent integral equation for the wave function. In the first, the time-dependent amplitude density is propagated, while in the other two, the wave function is propagated. As a numerical example, phase shifts and cross sections are calculated using a screened Coulomb, Yukawa type potential over the range 200-1000 eV. It is found that, in most cases, all three methods yield comparable accuracy and are about equally efficient computationally. However for l = 0, where the Coulomb well is not screened by the centrifugal potential, the TDADM requires smaller grid spacings to maintain accuracy.

Judson, Richard S.↗
NASA NTRS1992

Designing for time-dependent material response in spacecraft structures

To study the influence on overall deformations of the time-dependent constitutive properties of fiber-reinforced polymeric matrix composite materials being considered for use in orbiting precision segmented reflectors, simple sandwich beam models are developed. The beam models include layers representing the face sheets, the core, and the adhesive bonding of the face sheets to the core. A three-layer model lumps the adhesive layers with the face sheets or core, while a five-layer model considers the adhesive layers explicitly. The deformation response of the three-layer and five-layer sandwich beam models to a midspan point load is studied. This elementary loading leads to a simple analysis, and it is easy to create this loading in the laboratory. Using the correspondence principle of viscoelasticity, the models representing the elastic behavior of the two beams are transformed into time-dependent models. Representative cases of time-dependent material behavior for the facesheet material, the core material, and the adhesive are used to evaluate the influence of these constituents being time-dependent on the deformations of the beam. As an example of the results presented, if it assumed that, as a worst case, the polymer-dominated shear properties of the core behave as a Maxwell fluid such that under constant shear stress the shear strain increases by a factor of 10 in 20 years, then it is shown that the beam deflection increases by a factor of 1.4 during that time. In addition to quantitative conclusions, several assumptions are discussed which simplify the analyses for use with more complicated material models. Finally, it is shown that the simpler three-layer model suffices in many situations.

Hyer, M. W.↗
NASA NTRS1979

A time dependent difference theory for sound propagation in ducts with flow

A time dependent numerical solution of the linearized continuity and momentum equation was developed for sound propagation in a two dimensional straight hard or soft wall duct with a sheared mean flow. The time dependent governing acoustic difference equations and boundary conditions were developed along with a numerical determination of the maximum stable time increments. A harmonic noise source radiating into a quiescent duct was analyzed. This explicit iteration method then calculated stepwise in real time to obtain the transient as well as the steady state solution of the acoustic field. Example calculations were presented for sound propagation in hard and soft wall ducts, with no flow and plug flow. Although the problem with sheared flow was formulated and programmed, sample calculations were not examined. The time dependent finite difference analysis was found to be superior to the steady state finite difference and finite element techniques because of shorter solution times and the elimination of large matrix storage requirements.

Baumeister, K. J.↗
NASA NTRS1979

A time dependent difference theory for sound propagation in ducts with flow

A time dependent numerical solution of the linearized continuity and momentum equation is developed for sound propagation in a two-dimensional straight hard or soft wall duct with a sheared mean flow. The time dependent governing acoustic-difference equations and boundary conditions are developed along with a numerical determination of the maximum stable time increments. The analysis begins with a harmonic noise source radiating into a quiescent duct. This explicit iteration method then calculates stepwise in real time to obtain the transient as well as the 'steady' state solution of the acoustic field. Example calculations are presented for sound propagation in hard and soft wall ducts, with no flow and with plug flow. Although the problem with sheared flow has been formulated and programmed, sample calculations have not yet been examined. So far, the time dependent finite difference analysis has been found to be superior to the steady state finite difference and finite element techniques because of shorter solution times and the elimination of large matrix storage requirements.

Baumeister, K. J.↗
NASA NTRS1996

First Measurements of Time-Dependent Nucleation as a Function of Composition in Na2O.2CaO.3SiO2 Glasses

The first measurements in any system of the composition dependence of the time-dependent nucleation rate are presented Nucleation rates of the stoichiometric crystalline phase, Na2O.2CaO.3SiO2, from quenched glasses made with different SiO2 concentrations were determined as a function of temperature and glass composition. A strong compositional dependence of the nucleation rates and a weak dependence for the induction times are observed. Using measured values of the liquidus temperatures and growth velocities as a function of glass composition, these data are shown to be consistent with predictions from the classical theory of nucleation, assuming a composition-dependent interfacial energy.

Kelton, K. F.↗
NASA NTRS2003

A Study of Time-dependent and Anisotropic Effects on the Deformation Response of Two Flywheel Designs

The influence of material time dependency and anisotropy in the context of two specific flywheel designs-preload and multi-directional composite (MDC)--is investigated. In particular, we focus on the following aspects: 1) geometric constraints, 2) material constraints, 3) loading type, and 4) the fundamental character of the time-dependent response, i.e., reversible or irreversible. The bulk of the results presented were obtained using a composite (PMC IM7/8552 at 135 C) material system. The material was characterized using a general multimechanism hereditary (viscoelastoplastic) model. As a general conclusion, the results have clearly shown that both the preload and the MDC rotor designs are significantly affected by time-dependent material behavior, which may impact the state of rotor balance and potentially reduce its operating life. In view of the results of the parametric studies and predictions made in the present study, the need for actual experimentation focusing on the time-dependent behavior of full-scale flywheel rotors is self-evident.

Saleeb, Atef F.↗
NASA NTRS1990

A time-dependent dusty gas dynamic model of axisymmetric cometary jets

The present time-dependent, axisymmetric dusty gas dynamical model of inner cometary atmospheres solves the coupled and time-dependent equations of continuity, momentum, and energy for a gas-dust mixture between the surface of the nucleus and 100 km, using an axisymmetric 40 x 40 grid structure. A novel numerical method employing a second-order accurate Godunov-type scheme with dimensional splitting is used to solve the time-dependent pde system. It is established that a subsolar dust spike not predicted by previous calculations is generated by narrow axisymmetric jets, together with a jet cone whose opening angle depends on the jet length.

Korosmezey, A.↗
NASA NTRS1979

Time-dependent difference theory for noise propagation in a two-dimensional duct

A time dependent numerical formulation was derived for sound propagation in a two dimensional straight soft-walled duct in the absence of mean flow. The time dependent governing acoustic-difference equations and boundary conditions were developed along with the maximum stable time increment. Example calculations were presented for sound attenuation in hard and soft wall ducts. The time dependent analysis were found to be superior to the conventional steady numerical analysis because of much shorter solution times and the elimination of matrix storage requirements.

Baumeister, K. J.↗