Search NASA⌕ Search

SEARCH · Search NASA

Results for “Trajectory Reconstruction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Shuttle /STS-1/ entry trajectory reconstruction

The methods and data used to reconstruct the Shuttle entry trajectory aerodynamics from 180 km to landing are reviewed. Onboard accelerometer and gyro measurements are used with a weighted least squares filter along with ground tracking data to provide the evolving spacecraft state. The software development is described, noting that computations include linear acceleration and angular rate data, aerodynamic coefficient, and inertial measurement units, sampled at 170 Hz. Ground tracking data was gathered on S- and C-bands; Guam data is considered critical as it was taken during the blackout at the beginning of entry. The generation of a best estimate trajectory, combining flight and ground data, yields inplane parameters of altitude, flight path angle, and velocity for comparison with navigational instrumentation. Predicted lift/drag ratios were found to be accurate from Mach 1-25, and up to 23% low below Mach 1.

Compton, H. R.↗

Orbit determination results and trajectory reconstruction for the Cassini/Huygens Mission

During Cassini's third orbit around Saturn, the Huygens Probe was successfully released on a trajectory that resulted in the probe entering Titan's atmosphere on January 14, 2005, making it both the most distant spacecraft landing and the first spacecraft to successfully land on the moon of another planet. This paper documents the reconstruction of both the orbiter and probe trajectoriespanning the Titan-B and Titan-C encounters.

reconstruction↗

Iterated Sigma-Point Kalman Filtering for Trajectory Reconstruction

Two second-order Kalman filtering methods are added to the New Statistical Trajec-tory Estimation Program (NewSTEP). The two filters are of the class of Sigma-Point Kalman Filters, namely the Unscented Kalman Filter and the Divided Difference Filter. Both filters are implemented with an iterative measurement update step. Results from simulation test case and a flight data test case are provided to show the filter performance. The results indicate that the new second-order filters pro-duce trajectory estimates with reduced uncertainties when compared to the existing first-order filtering method.

Sophia Vedvik↗

Simulated Trajectory Reconstruction of the Genesis Aeroballistic Testing for Dragonfly

Dragonfly is a NASA New Frontiers Program mission, led by Johns Hopkins Applied Physics Laboratory (APL), that will deliver a rotorcraft lander to Saturn’s moon, Titan, which uses a Genesis derived entry vehicle shape. During the Genesis mission, there were concerns with the dynamic stability of the configuration leading to testing at the Aeroballistic Research Facility at Eglin Air Force Base and Dragonfly shares these concerns given the similarity of the entry vehicle shapes. The focus of this paper is to compare the dynamics observed in the ballistic range shots from 1999 against the dynamics from simulation using the Program to Optimize Trajectories II (POST2). This analysis provides a confirmation that the aerodynamics developed during the Genesis mission, especially from ballistic range shots, is being used properly in the Dragonfly mission entry aerodynamics database.

Dragonfly↗

Mars 2020 Perseverance trajectory reconstruction and performance from launch through landing

The Mars 2020 (M2020) Mission carrying Perseverance, the most advanced rover ever sent to Mars, successfully launched on an Atlas V 541 (AV-088) launch vehicle from the Eastern Test Range (ETR) at Cape Canaveral Air Force Station (CCAFS) in Florida at 11:50:00 UTC (T-Zero time) on July 30, 2020. After some station reconfiguration, carrier/telemetry were locked at both Deep Space Network (DSN) Canberra and Goldstone stations. Perseverance entered the Martian atmosphere at 20:36:50 Spacecraft Event Time (SCET) UTC, and landed inside Jezero Crater at 20:43:49 SCET UTC on February 18, 2021. Confirmation of nominal landing was received at the DSN Goldstone and Madrid tracking stations via the Mars Reconnaissance Orbiter at 20:55:11 Earth Received Time (ERT) UTC. This paper summarizes in detail the actual vs. predicted performance in terms of launch vehicle events, launch vehicle injection performance, actual DSN spacecraft lockup, trajectory correction maneuver performance, Entry, Descent, and Landing events, and overall trajectory and geometric characteristics.

Abilleira, Fernando↗

Mars 2020 Perseverance Trajectory Reconstruction and Performance from Launch through Landing

The Mars 2020 (M2020) Mission carrying Perseverance, the most advanced rover ever sent to Mars, successfully launched on an Atlas V 541 (AV-088) launch vehicle from the Eastern Test Range (ETR) at Cape Canaveral Air Force Station (CCAFS) in Florida at 11:50:00 UTC (T-Zero time) on July 30, 2020. After some station reconfiguration, carrier/telemetry were locked at both Deep Space Network (DSN) Canberra and Goldstone stations. Perseverance entered the Martian atmosphere at 20:36:50 Spacecraft Event Time (SCET) UTC, and landed inside Jezero Crater at 20:43:49 SCET UTC on February 18, 2021. Confirmation of nominal landing was received at the DSN Goldstone and Madrid tracking stations via the Mars Reconnaissance Orbiter at 20:55:11 Earth Received Time (ERT) UTC. This paper summarizes in detail the actual vs. predicted performance in terms of launch vehicle events, launch vehicle injection performance, actual DSN spacecraft lockup, trajectory correction maneuver performance, Entry, Descent, and Landing events, and overall trajectory and geometric characteristics.

Wong, Mau↗

2011 Mars Science Laboratory Trajectory Reconstruction and Performance from Launch Through Landing

The Mars Science Laboratory (MSL) mission successfully launched on an Atlas V 541 Expendable Evolved Launch Vehicle (EELV) from the Eastern Test Range (ETR) at Cape Canaveral Air Force Station (CCAFS) in Florida at 15:02:00 UTC on November 26th, 2011. At 15:52:06 UTC, six minutes after the MSL spacecraft separated from the Centaur upper stage, the spacecraft transmitter was turned on and in less than 20 s spacecraft carrier lock was achieved at the Universal Space Network (USN) Dongara tracking station located in Western Australia. MSL, carrying the most sophisticated rover ever sent to Mars, entered the Martian atmosphere at 05:10:46 SpaceCraft Event Time (SCET) UTC, and landed inside Gale Crater at 05:17:57 SCET UTC on August 6th, 2012. Confirmation of nominal landing was received at the Deep Space Network (DSN) Canberra tracking station via the Mars Odyssey relay spacecraft at 05:31:45 Earth Received Time (ERT) UTC. This paper summarizes in detail the actual vs. predicted trajectory performance in terms of launch vehicle events, launch vehicle injection performance, actual DSN/USN spacecraft lockup, trajectory correction maneuver performance, Entry, Descent, and Landing events, and overall trajectory and geometry characteristics.

trajectory↗

Trajectory Reconstruction for the Genesis Entry

An overview of the reconstruction analyses performed for the Genesis capsule entry is described. The results indicate that the actual entry prior to the drogue deployment failure was very close to the pre-entry predictions. The capsule landed 8.3 km south of the desired target at Utah Test and Training Range. Analysis on infrared video footage (obtained from the tracking stations) during the descent estimated the onset of the capsule tumble at Mach 0.9. Frequency analysis on the infrared video data indicates that the aerodynamics generated for the Genesis capsule reasonably predicted the drag and static stability. Observations of the heatshield support the pre-entry simulation estimates of a small hypersonic angles-of-attack, since there is very little, if any, charring of the shoulder region or the afterbody. Through this investigation, an overall assertion can be made that all the data gathered from the Genesis entry is consistent with flight performance close to the nominal pre-entry prediction. Consequently, the design principles and methodologies utilized for the flight dynamics, aerodynamics, and aerothermodynamics analyses have been corroborated.

Desai, Prasun N.↗

2018 Mars Insight Trajectory Reconstruction and Performance from Launch Through Landing

The InSight mission successfully launched to Mars on an Atlas V 401 launch vehicle from the Western Test Range (WTR) at Vandenberg Air Force Base (VAFB) at 04:05:00 PDT on May 5th, 2018 and landed in the Elysium Planitia Region on November 26th, 2018. Data confirming nominal touchdown was received at 11:52:59 AM PST. This paper summarizes in detail the actual vs. predicted performance of the InSight spacecraft and all associated assets in terms of launch vehicle events, injection performance, DSN performance, cruise performance, and Entry, Descent, and Landing events.

Abilleira, Fernando↗

6-DOF aerobraking trajectory reconstruction by use of inertial measurements unit (IMU) data for the improvement of aerobraking navigation

For any interplanetary mission, there are certain types of data that are used as a means of determining both the position and velocity of a spacecraft. The data types currently in use are Doppler, Range, Optical and VLBI. All of them are radiometric with the exception of the Optical data type. NASA's Deep Space Network is employed for the purpose of transmitting and receiving data to and from the spacecraft repsectively. For this exchange of information to take place, both the DSN and spacecrft high gain antennae must be pointed towards each other.

Lisano, Michael E.↗

MAVEN Navigation During the First Mars Year of the Science Mission

The Mars Atmosphere and Volatile Evolution mission (MAVEN) is the first mission devoted to studying the Martian atmosphere. From a Navigation perspective it is unique in that science is performed at near aerobraking altitudes. This results in the requirements on Navigation trajectory accuracy requirements which are an order of magnitude tighter than those of aerobraking phases on previous missions. Navigation experiences with the Mars atmosphere are described as they pertain to Navigation models, trajectory reconstructions, trajectory predictions, density corridor control, and collision avoidance of other bodies around Mars.

Demcak, Stuart↗

An Investigation of Parallel Programming Techniques Applied to Monte Carlo Simulations for Post-Flight Reconstruction of Spacecraft Trajectory

Parallelizing software to execute on multi-core central processing units (CPUs) and graphics processing units (GPUs) can be challenging. For some fields outside of Computer Science, this transition comes with new issues. For example, memory limitations can require modifications to code not initially developed to run on GPUs. This work applies the Open Multi-Processing (OpenMP) and Open Accelerators (OpenACC) directive-based parallelization strategies on a Monte Carlo simulation approach for trajectory reconstruction enabling it to run on multi-core CPUs and GPUs. Large matrix operations are the most common use of GPUs, which are not present in this algorithm; however, the natural parallelism of independent trajectories in Monte Carlo simulations is exploited. Benchmarking data are presented comparing execution times of the software for single-thread CPUs, multi-thread CPUs with OpenMP, and multi-thread GPUs using OpenACC. These data were collected using nodes with Intel® Xeon® E5-2670 (Sandy Bridge) CPUs enhanced with NVIDIA® Tesla® K40 GPUs on the Pleiades Supercomputer cluster at the National Aeronautics and Space Administration (NASA) Ames Research Center (ARC) and a local Intel® Xeon Phi™ node at NASA Langley Research Center (LaRC).

Williams, R. Anthony↗