Search NASA⌕ Search

SEARCH · Search NASA

Results for “Upcoming Enhancements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

The 2011 Draconid Shower Risk to Earth-Orbiting Satellites

Current meteor shower forecast models project a strong Draconid outburst, possibly a storm, on October 8, 2011, with a duration of approximately 7 hours and peaking between 19 and 21 hours UT. Predicted rates span an order of magnitude, with maximum Zenithal Hourly Rates (ZHRs) ranging from a few tens to several hundred. Calibration of the NASA MSFC Meteoroid Stream Model 1 to radar and optical observations of past apparitions, particularly the 2005 Draconid outburst 2, suggest that the maximum rate will be several hundreds per hour. Given the high spatial density of the Draconid stream, this implies a maximum meteoroid flux of 5-10 Draconids km(exp -2)/hr (to a limiting diameter of 1 mm), some 25-50 times greater than the normal sporadic flux of 0.2 km(exp -2)/ hr for particles of this size. Total outburst fluence, assuming a maximum ZHR of 750, is 15.5 Draconids km(exp -2), resulting in an overall 10x risk increase to spacecraft surfaces vulnerable to hypervelocity impacts by 1 mm particles. It is now established that a significant fraction of spacecraft anomalies produced by shower meteoroids (e.g. OLYMPUS and LandSat 5) are caused by electrostatic discharges produced by meteoroid impacts. In these cases, the charge generated is roughly proportional to v(exp 3.5(4)), giving a Draconid moving at 20 km/s approximately 1/80th the electrical damage potential of a Leonid of the same mass. In other words, a Draconid outburst with a maximum ZHR of 800 presents the same electrical risk as a normal Leonid shower with a ZHR of 15, assuming the mass indices and shower durations are the same. This is supported by the fact that no spacecraft electrical anomalies were reported during the strong Draconid outbursts of 1985 and 1998. However, the lack of past anomalies should not be taken as carte blanche for satellite operators to ignore the 2011 Draconids, as the upcoming outburst will constitute a period of enhanced risk for vehicles in near-Earth space. Each spacecrft is unique, and components have differing damage thresholds; programs are encouraged to conduct analyses to determine whether or not mitigation strategies are necessary for their vehicles.

Cooke, William J.↗
NASA NTRS1992

STS-49 Endeavour Overview

Daniel Germany, Manager, Orbiter and GFE Projects, Johnson Flight Center, gives an overview of the STS-49 Endeavour mission. He discusses Endeavour's successful firing test, the upcoming launch, and the Endeavour Orbiter's recent enhancements. He then answers questions from the press.

Source record↗
NASA NTRS2017

Thermal Development of the Mars 2020 Enhanced Engineering Cameras

The engineering cameras (ECAMs) of the 2003 Mars Exploration Rover (MER) mission were re-flown on the Mars Science Laboratory (MSL) mission that launched in 2011. The upcoming Mars 2020 rover mission will introduce a new fleet of cameras called the enhanced engineering cameras (EECAMs). These EECAMs will have improved imaging capability, as the technology of the past ECAMs flown on Mars surface missions have become outdated. The EECAMs include six upgraded HazCams, two upgraded NavCams, and a single, newly-conceived CacheCam. The purposes of the HazCams and NavCams remain the same as they were for MER and MSL: to detect hazards to the front and rear of the rover, and to help in navigation across the Martian surface. The CacheCam will be used to take images of samples obtained by the rover’s Sample Caching System. This paper compares the differences in the thermal designs of the ECAMs and EECAMs, their design drivers, and their implications for the mission operations of the Mars 2020 rover.

Novak, Keith S.↗
NASA NTRS2022

Bringing Planetary Science Mission Outreach to the Deaf and Blind Communities

Introduction: Technology for enhancing outreach, like 3D printing, and science communication products, such as videos and podcasts, can be utilized within the planetary science community, especially for the engagement and excitement of current or upcoming planetary exploration missions. However, these communication products can also be further enhanced for the benefit of the blind and deaf communities. While such products may already be readily available, such projects are not easily accessible to blind and/or deaf certified educators, which often rely on making their own resources or do not have the funds to provide such resources (e.g., cost of 3D printers or cost of braille books). The planetary science community can have better practices to reach these broader audiences. Best practices can include transcripts from podcasts, transcripts in videos, and large-font captions. Images on websites and social media accounts should also include alt-text descriptive captions. 3D printing can also enhance planetary science for the blind community, through tactile posters, maps, and pamphlets. Planetary data can also be augmented by providing different tactile geological maps (e.g., topography or various datasets), and audio-visual videos freely available for educators. Visual Engagement: Visual engagement consists of several avenues to consider, the three main themes includes: 1) swag; 2) videos; 3) interactive exploration. Swag can include the fun visual take-home materials, such as stickers, posters, bookmarks, etc. Videos can include educational-specific videos (available freely via YouTube or by other educational-specific streaming avenues, such as Nebula or Curiosity Stream), provided they have Closed Captioning (CC). The use of QR codes to such videos or websites can also benefit to being added on swag. Interactive exploration can also be sub-divided by different types of engagement. A popular and still fairly new technology for public engagement is the use of virtual reality (VR). While this has been mainly for martian and lunar surface exploration [1], the deaf communities can benefit from VR through a more extensive look at our solar system and beyond (for example, a VR experience of the flight path, or visual map of the heliosphere/dynamics of our Sun). Audio Engagement: Audio tools can also be a useful avenue of communication, especially for the blind communities. Audio archiving can certainly be transcripts from the video engagements, but also the use of podcasts can also be a benefit. Podcasting can take on two forms: 1) interview engagement; and 2) update engagement. For interviews, scientists can communicate with STEM-specific podcast platforms to make other listener-bases aware of what is going on with a specific mission. For update-type communication, missions may opt to have an archived podcast of news, updates, and the teams involved. The most important aspect of such podcasts would be for the need of complimentary transcripts (including descriptive transcripts if sounds are included), and the limited use of jargon. Research Engagement: There have been several examples of involving the blind and low-vision communities in citizen science, such as through the NASA Heliophysics division. Examples include the NASA PUNCH (Polarimeter to Unify the Corona and Heliosphere) mission led by the Southwest Research Institute [2], which include blind and visually-impaired citizens to assist in the Sun’s coronal rhythms.” Another example is the Eclipse Soundscapes: Citizen Science Project (ES:CSP), which documents observations of acoustical changes of nature and ecosystems during solar eclipse events [3]. Inclusivity: A major theme that is necessary for public engagement is inclusivity and the awareness of reaching broader audiences. Outreach to include hearing/seeing impaired communities are still lacking in the sciences. There are several opportunities that the planetary sciences could take. Other projects that have emerged from the space sciences include adding transcripts to visual engagement [4], and the use of 3D printing for the visually-impaired [5]. References: [1] Olgin, J. (2020) 51st LPSC, Abstract 2137. [2] https://scitechdaily.com/outreach-for-nasa-punch-mission-embraces-ancient-and-modern-sun-watching-theme/ [3] https://science.nasa.gov/science-activation-team/eclipse-soundscapes [4] NASA International Observe the Moon Night (Blind and Deaf Accessible), Youtube Video ( https://www.youtube.com/watch?v=neHCfg0S3-Q) [5] Richardson, J., et al. (2018) AGU Fall Meeting, Abstract ED23F-0963.

C J Ahrens↗
NASA NTRS2015

Integrated Medical Model Project - Overview and Summary of Historical Application

Introduction: The Integrated Medical Model (IMM) Project represents one aspect of NASA's Human Research Program (HRP) to quantitatively assess medical risks to astronauts for existing operational missions as well as missions associated with future exploration and commercial space flight ventures. The IMM takes a probabilistic approach to assessing the likelihood and specific outcomes of one hundred medical conditions within the envelope of accepted space flight standards of care over a selectable range of mission capabilities. A specially developed Integrated Medical Evidence Database (iMED) maintains evidence-based, organizational knowledge across a variety of data sources. Since becoming operational in 2011, version 3.0 of the IMM, the supporting iMED, and the expertise of the IMM project team have contributed to a wide range of decision and informational processes for the space medical and human research community. This presentation provides an overview of the IMM conceptual architecture and range of application through examples of actual space flight community questions posed to the IMM project. Methods: Figure 1 [see document] illustrates the IMM modeling system and scenario process. As illustrated, the IMM computational architecture is based on Probabilistic Risk Assessment techniques. Nineteen assumptions and limitations define the IMM application domain. Scenario definitions include crew medical attributes and mission specific details. The IMM forecasts probabilities of loss of crew life (LOCL), evacuation (EVAC), quality time lost during the mission, number of medical resources utilized and the number and type of medical events by combining scenario information with in-flight, analog, and terrestrial medical information stored in the iMED. In addition, the metrics provide the integrated information necessary to estimate optimized in-flight medical kit contents under constraints of mass and volume or acceptable level of mission risk. Results and Conclusions: Historically, IMM simulations support Science and Technology planning, Exploration mission planning, and ISS program operations by supplying simulation support, iMED data information, and subject matter expertise to Crew Health and Safety and the HRP. Upcoming release of IMM version 4.0 seeks to provide enhanced functionality to increase the quality of risk decisions made using the IMM through a more accurate representation of the real world system.

Myers, J.↗
NASA NTRS2023

Aqua MODIS: 20 Years of On-orbit Calibration and Performance

Since its launch in May 2002, Aqua MODIS has successfully operated for more than 20 years and has continuously generated a wide range of data products that have enabled and supported the remote sensing community and users worldwide for their studies of the Earth’s system by monitoring changes in its key environmental parameters. Although Aqua MODIS, designed with a lifetime requirement of 6 years, is currently operated in its extended mission phase, it continues to make high quality global observations of the Earth’s surface via its 36 spectral bands that cover wavelengths from visible to long-wave infrared. To date, all instrument on-board calibrators (OBC) remain capable of performing their design functions, providing various calibration data sets to help monitor on-orbit changes in sensor responses and performance characteristics. In addition to the OBC, regularly scheduled lunar observations and select Earth-view targets are used extensively to support sensor on-orbit calibration, especially for the calibration of the visible channels (or bands). In this paper, we provide an overview of Aqua MODIS on-orbit calibration activities and methodologies for both reflective solar bands (RSB) and thermal emissive bands (TEB), illustrate its on-orbit performance over the past 20 years using examples derived from OBC measurements, lunar observations, and Earth-view response trends, and describe various calibration improvements made over its entire mission. We focus on key issues identified since launch, such as solar diffuser degradation, electronic crosstalk, and on-orbit changes in sensor response versus scan-angle, along with approaches and strategies developed to mitigate their impact on sensor calibration quality. Also discussed in this paper are some of the key calibration enhancements incorporated recently in the Collection 6.1 and the upcoming Collection 7 Level-1B algorithms.

Polarization↗
NASA NTRS2011

Enhancing a Simple MODIS Cloud Mask Algorithm for the Landsat Data Continuity Mission

The presence of clouds in images acquired by the Landsat series of satellites is usually an undesirable, but generally unavoidable fact. With the emphasis of the program being on land imaging, the suspended liquid/ice particles of which clouds are made of fully or partially obscure the desired observational target. Knowing the amount and location of clouds in a Landsat scene is therefore valuable information for scene selection, for making clear-sky composites from multiple scenes, and for scheduling future acquisitions. The two instruments in the upcoming Landsat Data Continuity Mission (LDCM) will include new channels that will enhance our ability to detect high clouds which are often also thin in the sense that a large fraction of solar radiation can pass through them. This work studies the potential impact of these new channels on enhancing LDCM's cloud detection capabilities compared to previous Landsat missions. We revisit a previously published scheme for cloud detection and add new tests to capture more of the thin clouds that are harder to detect with the more limited arsenal channels. Since there are no Landsat data yet that include the new LDCM channels, we resort to data from another instrument, MODIS, which has these bands, as well as the other bands of LDCM, to test the capabilities of our new algorithm. By comparing our revised scheme's performance against the performance of the official MODIS cloud detection scheme, we conclude that the new scheme performs better than the earlier scheme which was not very good at thin cloud detection.

Wilson, Michael J.↗
NASA NTRSDate not supplied

CyanoSCape: Freshwater Phytoplankton and Floating Aquatic Vegetation Biodiversity

In Southern Africa, the impacts of anthropogenic activities on biodiversity and ecosystem services are exacerbated by the climate crisis. Rapid land use change and the lack of emphasis on environmentally sustainable agricultural practices has hindered hydrological processes and compromised riverine and aquatic ecosystems. This poses obvious risks to natural/indigenous aquatic biodiversity and long-term ecosystem sustainability. Phytoplankton serve as the foundation of the freshwater food web with zooplankton as consumers, which feed fish, invertebrates, and so on up the food chain that comprises the biodiversity of the freshwater system that serves as habitat for biodiversity as well. The diversity of phytoplankton (microscopic organisms) includes photosynthesizing bacteria (cyanobacteria), plant-like diatoms, dinoflagellates, and green algae. Nutrient run-off from agricultural fertilizers and urban overflows, warm temperatures, abundant light availability and compromised hydrological systems provide an ideal environment for cyanobacteria to flourish. Increased prevalence of cyanobacteria, due to both natural and anthropogenic causes, can incur significant effects on the biodiversity of the overall phytoplankton assemblage. These bloom forming algae can significantly outcompete other phytoplankton classes in warmer and eutrophic waters where they are quick to dominate the freshwater system. Eutrophication and toxic cyanobacteria blooms (cyanoHABs) in the inland waters of the Greater Cape Floristic Region (GCFR) incur significant effects on the biodiversity of the overall phytoplankton assemblage and provide a favorable environment forthe overgrowth of floating aquatic vegetation (FAV), which is often invasive and associated with reduced aquatic biodiversity. The algal biodiversity of the GCFR’s freshwater systems is not well characterized. Hyperspectral optical observations are expected to facilitate the improvement of current phytoplankton functional type retrievals significantly, as the sensitivity is sufficient that the distinctive, fine spectral features of different phytoplankton groups can be detected. This will enable testing emerging algorithms and inform the development of new algorithms for use with upcoming hyperspectral satellite missions in this decade. Innovations in optical sensor sensitivity and next generation machine learning capabilities considerably enhance the potential for accurate and rapid detection of phytoplankton, namely the presence, extent, and diversity of cyanobacteria present in cyanoHABs and additionally, invasive FAV. Upcoming hyperspectral satellite missions such as NASA’s Surface Biology and Geology (SBG), Plankton, Aerosol, Cloud, ocean Ecosystem (PACE), and the European Space Agency’s Copernicus Hyperspectral Imaging Mission (CHIME) will provide imagery with unprecedented spectral and spatial resolution which will further enable the discovery of linkages between the seasonality and dynamics of HABs and FAV. The overarching goal of this project is to utilize hyperspectral data, with recently developed and next-generation algorithms, to determine the biodiversity of freshwater systems phytoplankton assemblage with emphasis on genus level distinction, as well as monitor the prevalence and diversity of FAV.

CyanoSCape↗
NASA NTRS2023

Modeling and Simulation for Exercise Vibration Isolation and Stabilization System Design

The microgravity environment that crew members experience on orbit presents a well-known health challenge, particularly when it comes to loss of muscle and bone mass. To counteract these negative effects, exercise countermeasures play a critical role in the daily routine of the crew on the International Space Station (ISS). To help inform requirements for upcoming exploration missions such as the Gateway Program, a new device, called the European Enhanced Exploration Exercise Device (E4D), is being built by the European Space Agency through their contractor, the Danish Aerospace Company. The E4D is being demonstrated on the ISS and is unique from other current exercise devices in that it provides four separate modalities in a single device: resistive, cycle ergometry, seated aerobic rowing, and rope pulling. To support the integration of E4D on ISS, a passive Vibration Isolation and Stabilization (VIS) system was required by NASA, and this responsibility was given to the Johnson Space Center. This paper describes the end-to-end process of modeling, simulation, and analysis used to inform the mechanical design of the VIS system. The process begins with the collection of representative exerciser motion capture (MoCap) through ground-based testing with the developmental E4D in both the Prototype Immersive Technology (PIT) Laboratory and the Active Response Gravity Offload System (ARGOS) facility at the Johnson Space Center. These collected MoCap data are processed through human biomechanics modeling to create forcing functions as input to a multibody dynamics simulation of the combined E4D/VIS system, with numerous resulting outputs. These outputs include microgravity accelerations, overall system displacements, internal and transmitted loads, as well as collisions. Microgravity accelerations are compared for compliance against ISS requirements while displacements are used for sway space determinations on the design and volumetric constraints within the targeted module. Internal loads are supplied to the supporting stress analysis teams and external loads for structural loads and dynamics teams, both at NASA and ESA. Finally, contact and clearance analysis is performed using the simulation to eliminate potential design issues. To ensure that the elements of the multibody simulation were verified and validated, correlation against multiple VIS related ground hardware testbeds was performed and characterized. In addition to the isolation part of the VIS problem, stabilization is also key to the integrated performance and evaluation. Due to the difficulty in defining ISS requirements in this area, the stability of the exerciser was inspected via analysis. Loss of balance was defined analytically as occurring when the resultant force vector acting on the exerciser lies outside the base of support of the feet. Both the VIS and E4D teams have recently gone through their Critical Design Reviews (CDRs) and the iterative model-based approach has been integral to inform mechanical design, particularly in the case of the VIS. This same end-to-end approach is now being applied for the Gateway Program, where an Exploration Exercise Device (EED) derived from the E4D and notional VIS for the device are under concept development.

Countermeasures↗
NASA NTRSDate not supplied

NASA’s Moon Trek Portal: New Capabilities Supporting Mission Planning and Engagement

Introduction: NASA’s Moon Trek (https://trek.nasa.gov/moon/) is one of a growing number of interactive, browser-based, online portals for planetary data visualization and analysis produced by NASA’s Solar System Treks Project (SSTP). Moon Trek continues to be enhanced with new data and new capabilities enabling it to facilitate the planning and conducting of upcoming lunar missions by NASA, its commercial partners, and its international partners, as well as advancing its role as a valuable outreach tool. A Comprehensive Online Web Portal: Developed at NASA’s Jet Propulsion Laboratory (JPL) and managed as a project of NASA’s Solar System Exploration Research Virtual Institute (SSERVI) at NASA Ames Research Center, Moon Trek is a browser-based web portal. The portal provides easy-to-use tools for browsing, data layering, data product blending, and feature search among thousands of data products covering topography, mineralogy, elemental abundance, geology, and much more. Visualizations are provided in var-ious map projections, interactive 3D viewing, and in virtual reality. Using an in-house stereo workflow, SSTP is able to produce new NAC-based high-resolution mosaics and DEMs. Diverse Applications for Lunar Exploration: Baseline analytic tools available to all users include dis-tance measurement, elevation profiling, sun angle calculation, and 3D print file generation. More advanced account-level tools allow users to perform more computationally intensive analyses. These include ray-traced lighting analysis for user-specified areas over user-specified time/date ranges and time intervals, electro-static surface potential analysis, subsetting of large data products, slope analysis, and Lunar Laser Ranging geometry calculation. Artificial intelligence (AI) and ma-chine learning (ML) based tools have been implemented for crater detection and hazard analysis, boulder detection and hazard analysis, and rockfall detection. New Tools Facilitating Exploration: Additional, new tools have recently been added and others are in development, offering even greater functionality in con-ducting analyses of potential landing sites and areas of surface operations. The new Line-of-Sight tool facilitates communications planning between locations on the lunar surface, between any given site on the lunar surface and a specified ground station on the Earth, and between a site on the lunar surface and a relay asset in lunar orbit, all taking into account local lunar topography. The new Data Plotter tool provides both tabular and graphical representations of pixel values along a user specified path for a growing number of data products. The new NAC Finder tool will identify and pro-vide access to NAC images that intersect a user-defined path or bounded area. The SSTP development team is looking to leverage the capabilities of its existing AI and ML crater, boulder, and rockfall detection and analysis tools, and extend that technology to a generalized feature detector that can be trained on instances of specific types of landforms and then search the lunar surface for more examples of such features. New traverse planning tools are being developed with use cases in generalized concept studies and specific mission planning in mind. These will facilitate finding optimal traverse paths based on constraints such as slope, lighting, hazard avoidance, and communications. These will be complemented by new traverse visualization capabilities. Users will be able to interactively ride along with a rover, examining 3D views of the terrain while adjusting camera height and viewing angle along with selecting different data layer overlays to drape across the terrain. Engaging the Public: The capabilities being developed for mission planning are being leveraged to further enhance Moon Trek’s proven utility as a valuable public outreach resource. This includes providing multiple lev-els of engagement with different points of entry. At its simplest level, promoting understanding through visualization, media and the public will be able to easily visualize and conduct their own exploration of lunar sites targeted by NASA and its partners. For a more in-depth experience, we are working with our stakeholders to promote understanding through interaction by extend-ing our current landing site and traverse analysis capabilities, making simplified access to these tools available to those who want to explore more deeply key factors in planning a mission through interactive and possibly even gamified experiences. The highest degree of public outreach, focusing on engagement through scientific participation, could be achieved through our work with missions and the NASA Office of the Chief Scientist on Moon Trek’s extension as a tool with specialized capabilities for facilitating citizen science. In such scenarios, participants become members of extended mis-sion science teams, using dedicated and integrated interfaces to analyze mission data to help answer questions key to lunar science and exploration. We are work-ing with NASA’s Office of Communications, museums, planetariums, and the media to help them easily integrate accurate, detailed visualizations of NASA’s lunar destinations and exploration into their content/productions and to engage diverse audiences in diverse venues.

Moon Trek↗
NASA NTRS2003

Experiences with Testing the Largest Ground System NASA Has Ever Built

In the 1980s, the National Aeronautics and Space Administration (NASA) embarked upon a major Earth-focused program called Mission to Planet Earth. The Goddard Space Flight Center (GSFC) was selected to manage and develop a key component - the Earth Observing System (EOS). The EOS consisted of four major missions designed to monitor the Earth. The missions included 4 spacecraft. Terra (launched December 1999), Aqua (launched May 2002), ICESat (Ice, Cloud, and Land Elevation Satellite, launched January 2003), and Aura (scheduled for launch January 2004). The purpose of these missions was to provide support for NASA s long-term research effort for determining how human-induced and natural changes affect our global environment. The EOS Data and Information System (EOSDIS), a globally distributed, large-scale scientific system, was built to support EOS. Its primary function is to capture, collect, process, and distribute the most voluminous set of remotely sensed scientific data to date estimated to be 350 Gbytes per day. The EOSDIS is composed of a diverse set of elements with functional capabilities that require the implementation of a complex set of computers, high-speed networks, mission-unique equipment, and associated Information Technology (IT) software along with mission-specific software. All missions are constrained by schedule, budget, and staffing resources, and rigorous testing has been shown to be critical to the success of each mission. This paper addresses the challenges associated with the planning, test definition. resource scheduling, execution, and discrepancy reporting involved in the mission readiness testing of a ground system on the scale of EOSDIS. The size and complexity of the mission systems supporting the Aqua flight operations, for example, combined with the limited resources available, prompted the project to challenge the prevailing testing culture. The resulting success of the Aqua Mission Readiness Testing (MRT) program was due in no small measure to re-structuring the traditional programmatic and technical approach to a more efficient and robust program. Programmatically, it meant gaining the endorsement, commitment, and cooperation of the numerous subsystem element managers and other stakeholder organizations. Technically, it required an MRT program that was agile, could rapidly adapt to requirements changes, and was flexible in its overall approach. Furthermore, this paper addresses the following questions: 1. What are the key ingredients (e.g., test tools, organization) needed to conduct a successful MRT program? 2. What distinguishes EOS MRT from the traditional system testing approach? 3. Where should the focus of testing be since it is infeasible to test every element or subsystem? 4. How can MRT be applied effectively to other systems or missions? To provide answers to these questions, this paper relies heavily on real-life, hands-on experiences ("lessons learned") gained during mission readiness testing of the Terra ground system and, most recently, the Aqua and ICESat missions. Moreover, this paper explores how lessons learned were turned into lessons applied for the upcoming Aura mission. Although derived from the EOS missions, MRT techniques and strategies can be applied to enhance the testing of other missions.

Lehtonen, Ken↗
NASA NTRS2004

Development and Evaluation of an Airborne Separation Assurance System for Autonomous Aircraft Operations

NASA Langley Research Center is developing an Autonomous Operations Planner (AOP) that functions as an Airborne Separation Assurance System for autonomous flight operations. This development effort supports NASA s Distributed Air-Ground Traffic Management (DAG-TM) operational concept, designed to significantly increase capacity of the national airspace system, while maintaining safety. Autonomous aircraft pilots use the AOP to maintain traffic separation from other autonomous aircraft and managed aircraft flying under today's Instrument Flight Rules, while maintaining traffic flow management constraints assigned by Air Traffic Service Providers. AOP is designed to facilitate eventual implementation through careful modeling of its operational environment, interfaces with other aircraft systems and data links, and conformance with established flight deck conventions and human factors guidelines. AOP uses currently available or anticipated data exchanged over modeled Arinc 429 data buses and an Automatic Dependent Surveillance Broadcast 1090 MHz link. It provides pilots with conflict detection, prevention, and resolution functions and works with the Flight Management System to maintain assigned traffic flow management constraints. The AOP design has been enhanced over the course of several experiments conducted at NASA Langley and is being prepared for an upcoming Joint Air/Ground Simulation with NASA Ames Research Center.

Barhydt, Richard↗
NASA NTRS2011

Digital Beamforming Synthetic Aperture Radar (DBSAR) Polarimetric Upgrade

The Digital Beamforming Synthetic Aperture Radar (DBSAR) is a state-of-the-art radar system developed at NASA/Goddard Space Flight Center for the development and implementation of digital beamforming radar techniques. DBSAR was recently upgraded to polarimetric operation in order to enhance its capability as a science instrument. Two polarimetric approaches were carried out which will be demonstrated in upcoming flight campaigns.

Rincon, Rafael F.↗
NASA NTRS2022

In Situ Measurements of Surface Texture with Virtual Environments Support Science-Driven Human Surface Operations on the Moon and Beyond

Visualization tools enabling real-time scientific analysis are important for supporting future astronaut operations on the lunar surface. Such tools can be built into virtual environments to support scientific investigations, as well as situational awareness, real-time decision making, and efficient communication between astronauts and ground and support systems. Understanding how these tools can be optimized for science is essential for upcoming Artemis missions. In this contribution, we discuss how measurements of surface texture at multiple length scales can greatly enhance in situ science on/of the Moon, and eventually Mars, asteroids, and beyond. Roughness measurements at various wavelengths directly support objectives defined in the Artemis Science Plan, including (O1) “understanding planetary processes,” (O2) “understanding volatile cycles,” and (O3) “interpreting the impact history of the Earth-Moon system” . Key scientific analyses enabled by texture measurements at different length scales include: ● Sub-centimeter scales: Texture measurements can help constrain lava flow crystallinity, lava rheology, emplacement flow dynamics, and cooling histories (O1). Measurements of lacunarity (voids in fractal fill space) can shed light on eruptive volatile content, residence time of migrating volatiles, and near-surface volume available for micro-cold trapping of volatiles (O1, O2). ● Centimeter–meter scales: Texture measurements can be used for the differentiation of individual lava flows, the reconstruction of local stratigraphies and emplacement sequences, characterization of post-emplacement surface modification processes (O1, O3). Derived roughness (polarization) metrics can be used in the detection of water ice and characterization of ice properties (e.g., purity, grade, depth, abundance). ● Hectometer–Kilometer scales: Texture measurements can be used to differentiate major geologic surface units and surface structures (O1), constrain the presence of abundant ground ices (O2), and analyze surface modification and estimate surface age (O3). Real-time measurements of surface texture across these multiple length scales will enable efficient sample identification and scientific investigations by future astronauts. To support these investigations and the objective classification of surface texture, virtual environments employed by astronauts should be able to instantaneously convert raw data into processed data (e.g., digital terrain and elevation models) and derived metrics (e.g., RMS, std, Hurst, CPR) and perform statistical analyses (e.g., PCA, outliers, correlation matrices). Such tools are being developed and tested by the Resource Exploration and Science of our Cosmic Environment (RESOURCE) team, a node of NASA’s Solar System Exploration Research Virtual Institute (SSERVI), and are an excellent example of the powerful synergies of human and robotic ground assets critical in the return of humans to the Moon.

Ariel N. Deutsch↗
NASA NTRS1996

Space VLBI Co-Observing Developments in the DSN

The JPL/NASA Deep Space Network (DSN) plans to participate in the upcoming Space VLBI missions by using its 70m antenna time to co-observe with space-based radio telescopes. To enhance this support, the DSN is upgrading its radio astronomy equipment at L- and K-band, its VLBI recorders, and its computers and software for co-observing operations.

telescopes radio astronomy Jet Propulsion Laborato↗
NASA NTRSDate not supplied

NASA’s Atmospheric Science Data Center’s Approach to a Cloud-Based Model of Ingest, Archival, and Distribution of TEMPO Data: Methods, Challenges, and Best Practices

The National Aeronautics and Space Administration's (NASA) Atmospheric Science Data Center (ASDC) at NASA Langley Research Center in Hampton, VA provides atmospheric science data products and services to the science community, including enhanced search and subsetting capabilities for numerous datasets. The ASDC is the official Distributed Active Archive Center (DAAC) of record for the upcoming Tropospheric Emissions: Monitoring of Pollution (TEMPO) instrument. TEMPO will be situated on a geostationary satellite positioned at a longitude near the center of the conterminous United States and focused on North America, making hourly swaths of its field of regard from east to west. ASDC’s data products are currently hosted locally and services (e.g., spatial and temporal subsetting) are managed on premises. The ASDC is planning to provide TEMPO data and services in the cloud through the Earthdata Search platform. This presentation will discuss the ASDC’s approach to a cloud-based model of ingest, archival, and distribution of TEMPO data. Methods, challenges, best practices, lessons learned, and future plans will be discussed.

Iman Nasif↗