Search NASA⌕ Search

SEARCH · Search NASA

Results for “Urban Air Mobility/ Advanced Air Mobility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Distributed Visual Sensing and Fusion for Advanced Air Mobility

Surveillance solutions for Advanced and Urban Air Mobility frameworks are a key factor to enable safe operations of highly automated aircraft in the civil airspace. To design solutions suitable for all types of aircraft, non-cooperative sensors can be used, though many challenges arise when the small dimensions of the vehicles and their proximity to the ground during low-altitude missions are considered. A distributed sensing concept can be efficiently applied to address these challenges by exploiting multiple sensors within a surveillance network. This paper proposes a strategy to fuse the information collected by three ground-fixed cameras within a network of multiple distributed sensors and is tested with during experimental flight tests. The solution exploits standalone tracking estimates of each camera within a fusion center that performs triangulation and three-dimensional tracking. This approach is tested in a scenario involving two small UAVs flying at low altitude. The paper deals with the challenges of associating the two objects from independent and unrelated tracks to achieve robust triangulation, which produces meter-level mean errors with respect to GNSS-based ground truth.

Federica Vitiello↗
NASA NTRSDate not supplied

Sensing Small Uncrewed Aerial Vehicles with Distributed Radars for Advanced Air Mobility Surveillance

In the context of Advanced and Urban Air Mobility major attention is being reserved to the development of sensing strategies for small Uncrewed Aerial Vehicles (sUAVs) to enable their safe operations in and around urban areas. Such strategies should rely on non-cooperative distributed sensors to strengthen the surveillance solution towards the unreliability of Global Navigation Satellite System (GNSS) positioning information, which is typical for low-altitude-flying platforms in urban regions, and increase the monitored airspace volume. To this aim, this paper proposes a fusion solution for a network of distributed ground-based radars, which can be exploited to not only increase the coverage over large airspace volumes but also improve the overall detectability and traceability of sUAVs by leveraging on multiple views over the same area. The solution exploits a centralized fusion scheme in which measurements collected by each radar are shared with a Fusion Center where Kalman Filtering is exploited to build a unique, fused track. Tests conducted on experimental data collected using two sUAVs as flying targets and three distributed radars showed that the proposed solution can produce an increase in coverage from about 20 % (single radar configuration) to about 80 % of the targets’ flight path, as well as a finer accuracy yielding meter and meter-per-second root mean square error values on position and velocity components.

Federica Vitiello↗
NASA NTRSDate not supplied

Prediction-Based Auralization of a Multirotor Urban Air Mobility Vehicle

Recent advances in auralization methods applicable to rotary wing vehicles have made it possible to undertake a prediction-based auralization of a representative multirotor urban air mobility vehicle. These advances include a new capability for synthesizing loading and thickness noise directly from the prediction method and a new capability for predicting and synthesizing modulating broadband self noise within a unified system noise prediction-auralization framework. These capabilities are demonstrated for a six passenger quadrotor reference vehicle design using collective-pitch control. Propagation of the source noise to a ground observer completes the auralization process. The demonstrated capability serves as the basis for future work directed at perception-influenced design of low noise urban air mobility vehicles.

Auralization↗
NASA NTRSDate not supplied

Preliminary Evaluation of National Campaign Scenarios for Urban Air Mobility

Urban Air Mobility and Advanced Air Mobility concepts offer a novel method for transportation of passengers and cargo. Whereas the concept may reduce congestion of roads and highways, it also introduces new complexity to the National Airspace in terms of management of such operations. NASA, in partnership with FAA and industry, approaches these complexities with research and development activities such as flight tests and simulations, in order to better understand the impacts and necessary mechanisms by which these operations could be integrated. One example of such research and development activity that NASA is conducting is the Advanced Air Mobility National Campaign effort. Flight-test scenarios were proposed as part of the National Campaign and tested in simulation for evaluation with industry partners prior to the Flight test. This simulation, exercised as an engineering evaluation, provided a data collection opportunity to better understand what iterations and modifications would be needed to successfully demonstrate the flight-test scenarios in order to mature the concept of Urban Air Mobility and Advanced Air Mobility.

urban air mobility↗
NASA NTRSDate not supplied

Preliminary Evaluation of National Campaign Scenarios for Urban Air Mobility

Urban Air Mobility and Advanced Air Mobility concepts offer a novel method for transportation of passengers and cargo. Whereas the concept may reduce congestion of roads and highways, it also introduces new complexity to the National Airspace in terms of management of such operations. NASA, in partnership with FAA and industry, approaches these complexities with research and development activities such as flight tests and simulations, in order to better understand the impacts and necessary mechanisms by which these operations could be integrated. One example of such research and development activity that NASA is conducting is the Advanced Air Mobility National Campaign effort. Flight-test scenarios were proposed as part of the National Campaign and tested in simulation for evaluation with industry partners prior to the Flight test. This simulation, exercised as an engineering evaluation, provided a data collection opportunity to better understand what iterations and modifications would be needed to successfully demonstrate the flight-test scenarios in order to mature the concept of Urban Air Mobility and Advanced Air Mobility.

Urban Air Mobility↗
NASA NTRSDate not supplied

Multirotor Configuration Trades Informed by Handling Qualities for Urban Air Mobility Application

Many contemporary Advanced Air Mobility (AAM), and more specifically, urban air mobility (UAM) vehicle designers are attracted to variable rotor speed-controlled designs with multiple rotors because of the great potential for mass savings compared to more traditional, variable blade pitch-controlled vehicles. These designs are based on the assumption that the stability and control of recreation or basic utility-sized drones can be scaled to larger passenger-sized vehicles. Previous work had shown the challenges in stabilizing passenger-sized quadcopters. In this study, power constraints were made less restrictive and varied, allowing more control power. Motor parameters such as efficiency, nominal voltage and current operating point, and rise time of the rotor speed controller step response were studied. By fixing the efficiency of the motor to 95% and assuming a motor voltage to current ratio of 2.0 (previously, assumed to be 1.0), the authors were able to stabilize the quadcopter in the roll axis because this allowed the vehicle to achieve adequate rise times between 0.4 and 0.8 s. This motor optimization was extended to a hexacopter and octocopter designed to the same payload size and mission as the quadcopter. The three vehicle configurations and their motor speed controllers were compared. It was found that while hexacopter and octocopter required more mass and overall power; all three configurations had similar margins required for control. However, the hexacopter and octocopter were able to use this power margin to achieve lower rise times (i.e. the vehicle responded more quickly to pilot inputs) than the quadcopter, with the octocopter having the lowest rotor response rise time of the three vehicle configurations studied.

Multirotor↗
NASA NTRSDate not supplied

Community Noise Impact of Urban Air Mobility Vehicle Operations

Advanced air mobility (AAM) missions, carried out by electrically driven air vehicles, are characterized by ranges of less than about 300-500 nm (about 500-900 km) and include both rural and urban operations. The missions may include public transportation, cargo delivery, air taxi, and emergency response. While the urban air mobility (UAM) subset of AAM is projected to have high economic benefit, it is also the most difficult to develop because it must overcome many barriers, including those associated with the airspace system, safety, and community noise. This presentation focuses on the utilization of UAM source noise data for assessment of community noise impact. Although a limited number of acoustic flight measurement campaigns have been made to characterize the source noise of prototype and preproduction UAM aircraft, prediction-based approaches are primarily considered herein. Following conceptual design, in which the vehicle is appropriately sized for its intended mission, a comprehensive analysis must be performed for a range of operating conditions spanning the flight envelope to determine the corresponding configurations of the vehicle, that is, the trimmed states. For each trimmed state, the noise produced by each source, for example, steady and unsteady rotor noise, may be computed and so-called source noise (hemi)spheres generated. These source data may subsequently be used in various community noise impact analyses. Several use cases are presented including those supporting noise certification and those for auralizations that may, in turn, be used as part of a perception-influenced design process. Land use planning tools for generating noise exposure maps, including those using simulation and integrated modeling approaches, are also presented. Finally, use cases supporting development of low noise flight operations, including an acoustic flight simulator and acoustically aware flight control, are considered.

aircraft community noise↗
NASA NTRSDate not supplied

Individual Response Trends to Urban Air Mobility Noise in A Laboratory Study

Advanced Air Mobility, of which Urban Air Mobility (UAM) is a subset, presents new opportunities for more dynamic aviation transportation systems. It is essential to understand the human response to the noise of these vehicles for sustainable operations. This research aims to investigate the relationship between the noise level and number of events on individual human annoyance to UAM vehicle noise. A “noise and number” laboratory psychoacoustic study was conducted in the Exterior Effects Room at NASA Langley Research Center in January 2023. A total of 38 participants listened to 4-minute audio clips of UAM vehicle flyover noise and provided their annoyance response on an 11-point numerical scale. A test hypothesis was that annoyance to multiple flyovers can be found by adding the annoyance responses to individual flyovers. Results for the overall test subject pool suggest that annoyance grows faster than hypothesized as the number of aircraft events increases. This trend of faster annoyance growth only seems to hold when the individual flyovers are heard as distinct events. Parsing the data down to individuals provides further insight into the mechanisms contributing to the increased annoyance with number of events.

noise and number↗
NASA NTRSDate not supplied

High-Intensity Radiated Field (HIRF) Map - An Avoidance Approach for UAM, AAM, and UAS Vehicles

Advanced Air Mobility (AAM), Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles will fly in similar airspace to Transport Category Rotorcraft, thereby requiring them to meet the most severe requirements for HighIntensity Radiated Fields (HIRF) certification. The environment is severe for rotorcraft, much more so than for fixed-wing aircraft, due to lower altitude operations, potentially exposing the vehicles to close and direct view of high-power transmitters on the ground. High-level HIRF exposure potentially leads to avionic system upsets, interference, and undesirable effects. Shielding and circuit protection against HIRF will be a significant barrier to size, weight, and cost, especially for emerging electric vertical take-off and landing (eVTOL) and electric short take-off and landing (eSTOL) vehicles. This paper proposes a novel approach to HIRF protection, which reduces costs by testing and certifying vehicles to a “vehicle tolerance level” that is lower than required for Transport Category Rotorcraft. The remaining protection is achieved by maintaining a safe distance from known HIRF sources, calculated based on the vehicle's tolerance level and transmitter characteristics such as transmit power, antenna beamwidth, and direction. Tailored maps are developed, identifying transmitters and avoidance zones within an operating area or along a flight path, allowing for restricted vehicle operations. The HIRF avoidance zones could be smaller for vehicles with higher tolerance levels, enabling them to operate closer to transmitters. Transmitter data can be extracted from regulatory databases like the FCC and NOAA. A map tool is developed in Matlab to calculate and plot HIRF avoidance zones from transmitters in FCC and NOAA databases as proof of concept. Illustrations are presented for AM/FM/TV transmitters, communication satellite dishes, and weather radars. Also illustrated are HIRF zones for smaller transmitters, including land-mobile radios, pagers, microwave links, and cellular towers. An example of flight planning around the transmitters is presented. This method is a substantial deviation from the standard approach and involves slightly higher flight-planning complexity, but the potential cost savings are significant. Future AAM/UAM/UAS aeronautical charts could include these new HIRF avoidance zones.

HIRF↗
NASA NTRSDate not supplied

High-Intensity Radiated Field (HIRF) Map - An Avoidance Approach for UAM, AAM, and UAS Vehicles

Advanced Air Mobility (AAM), Urban Air Mobility (UAM), and Unmanned Aerial Systems (UAS) vehicles will fly in similar airspace to Transport Category Rotorcraft, thereby requiring them to meet the most severe requirements for High Intensity Radiated Fields (HIRF) certification. The environment is severe for rotorcraft, much more so than for fixed-wing aircraft, due to lower altitude operations, potentially exposing the vehicles to close and direct view of high-power transmitters on the ground. High-level HIRF exposure potentially leads to avionic system upsets, interference, and undesirable effects. Shielding and circuit protection against HIRF will be a significant barrier to size, weight, and cost, especially for emerging electric vertical take-off and landing (eVTOL) and electric short take-off and landing (eSTOL) vehicles. This paper proposes a novel approach to HIRF protection, which reduces costs by testing and certifying vehicles to a “vehicle tolerance level” that is lower than required for Transport Category Rotorcraft. The remaining protection is achieved by maintaining a safe distance from known HIRF sources, calculated based on the vehicle's tolerance level and transmitter characteristics such as transmit power, antenna beamwidth, and direction. Tailored maps are developed, identifying transmitters and avoidance zones within an operating area or along a flight path, allowing for restricted vehicle operations. The HIRF avoidance zones could be smaller for vehicles with higher tolerance levels, enabling them to operate closer to transmitters. Transmitter data can be extracted from regulatory databases like the FCC and NOAA. A map tool is developed in Matlab to calculate and plot HIRF avoidance zones from transmitters in FCC and NOAA databases as proof of concept. Illustrations are presented for AM/FM/TV transmitters, communication satellite dishes, and weather radars. Also illustrated are HIRF zones for smaller transmitters, including land-mobile radios, pagers, microwave links, and cellular towers. An example of flight planning around the transmitters is presented. This method is a substantial deviation from the standard approach and involves slightly higher flight-planning complexity, but the potential cost savings are significant. Future AAM/UAM/UAS aeronautical charts could include these new HIRF avoidance zones.

HIRF↗
NASA NTRSDate not supplied

Eye Glance Behaviors of Ground Control Station Operators in a Simulated Urban Air Mobility Environment

Research into concepts such as advanced air mobility (AAM) and urban air mobility (UAM) offers an opportunity for successfully and safely adding new classes of vehicles into the National Airspace System. However, a need exists for research into the human factors associated with these concepts. In this paper, we evaluate the gaze behaviors of three remote ground control station operators (GCSOs) conducting simulated UAM operations. The participants monitored and controlled an unmanned aircraft system (UAS) from pre-flight to landing using ground control station (GCS) software across nine scenarios within a remote UAS operations center at NASA Langley Research Center (LaRC). As this work was exploratory, descriptive statistics were calculated to provide some initial insight into GCSO gaze patterns associated with the GCS display. Scenarios that required the operator to directly interact with an airspace scheduling system off-screen resulted in fewer on-screen glances than scenarios that did not include direct interactions with the off-screen system. After investigating several areas of interest (AOIs) within the GCS display, participants primarily viewed three AOIs: the map, vehicle status, and operations checklist. The results yielded several GCS design and operational improvement recommendations to include: (a) adding altitude information to the vehicle icon, (b) adding additional traffic information, and (c) including additional GCS training, to reduce the need to scan an operations checklist, which would allow allocation of visual attention towards other AOIs.

Urban Air Mobility↗
NASA NTRS2020

In-time System-wide Safety Assurance (ISSA) Concept of Operations and Design Considerations for Urban Air Mobility (UAM)

Emerging operations involving Advanced Air Mobility (AAM), such as Urban Air Mobility (UAM), pose a challenge to safety assurance and to accessibility within the National Airspace System (NAS).In particular, the public has a low tolerance for risk in aviation and the current NAS tends to be labor-intensive with limited ability to scale up for UAM. In response to this landscape, NASA is collaborating with industry to define a Concept of Operations (ConOps) for In-time System-Wide Safety Assurance (ISSA) for scalable UAM involving a service-oriented architecture. This architecture focuses safety investments for technological solutions that can overcome safety related barriers for emerging operations. By working with industry, consensus can be reached on desirable system traits that are based on integration and fusion of data and leverage increasingly autonomous and automated systems. These complex systems can identify anomalies, precursors, and trends that together enable more proactive management of operational risks. AAM and UAM elevate the need for risk management in relation to increasing density and heterogeneity of vehicles and operations. Whereas safety in today’s NAS is built on a history of programs and technologies that react to incidents and accidents, AAM presents an opportunity to leverage that experience and its implications and proactively integrate safety into the earliest designs of vehicles and systems. In a perfect world AAM and UAM would not be inherently dangerous but until then ensuring the highest quality of safety requirements is the bridge to mitigating risks.

In-Time System-Wide Safety Assurance↗
NASA NTRSDate not supplied

Requirement Discovery Using Embedded Knowledge Graph With ChatGPT

The field of Advanced Air Mobility (AAM) is witnessing a transformation with innovations such as electric aircraft and increasingly automated airspace operations. Within AAM, the Urban Air Mobility (UAM) con-cept focuses on providing air-taxi services in densely populated urban areas. This research introduces the utilization of Large Language Models (LLMs), such as OpenAI's GPT-4, to enhance the UAM Requirement discovery process. This study explores two distinct approaches to leverage LLMs in the context of UAM Requirement discovery. The first approach evaluates the LLM's ability to provide responses without relying on additional outside systems, such as a relational or graph database. Instead, a vector store provides relevant information to the LLM based on the user’s question, a process known as Retrieval Augmented Generation (RAG). The second approach integrates the LLM with a graph database. The LLM acts as an intermediary between the user and the graph database, translating user questions into cypher queries for the database and database responses into human-readable answers for the user. Our team implemented and tested both solutions to analyze require-ments within a UAM dataset. This paper will talk about our approaches, implementations, and findings related to both approaches.

systems engineering↗
NASA NTRSDate not supplied

Requirement Discovery Using Embedded Knowledge Graph with ChatGPT

The field of Advanced Air Mobility (AAM) is witnessing a transformation with innovations such as electric aircraft and increasingly automated airspace operations. Within AAM, the Urban Air Mobility (UAM) concept focuses on providing air-taxi services in densely populated urban areas. This research introduces the utilization of Large Language Models (LLMs), such as OpenAI's GPT-4, to enhance the UAM Requirement discovery process. This study explores two distinct approaches to leverage LLMs in the context of UAM Requirement discovery. The first approach evaluates the LLM's ability to provide responses without relying on additional outside systems, such as a relational or graph database. Instead, a vector store provides relevant information to the LLM based on the user’s question, a process known as Retrieval Augmented Generation (RAG). The second approach integrates the LLM with a graph database. The LLM acts as an intermediary between the user and the graph database, translating user questions into cypher queries for the database and database responses into human-readable answers for the user. Our team implemented and tested both solutions to analyze requirements within a UAM dataset. This paper will talk about our approaches, implementations, and findings related to both approaches.

systems engineering↗
NASA NTRSDate not supplied

Requirement Discovery Using Embedded Knowledge Graph With ChatGPT - Poster

The field of Advanced Air Mobility (AAM) is witnessing a transformation with innovations such as electric aircraft and increasingly automated airspace operations. Within AAM, the Urban Air Mobility (UAM) con-cept focuses on providing air-taxi services in densely populated urban areas. This research introduces the utilization of Large Language Models (LLMs), such as OpenAI's GPT-4, to enhance the UAM Requirement discovery process. This study explores two distinct approaches to leverage LLMs in the context of UAM Requirement discovery. The first approach evaluates the LLM's ability to provide responses without relying on additional outside systems, such as a relational or graph database. Instead, a vector store provides relevant information to the LLM based on the user’s question, a process known as Retrieval Augmented Generation (RAG). The second approach integrates the LLM with a graph database. The LLM acts as an intermediary between the user and the graph database, translating user questions into cypher queries for the database and database responses into human-readable answers for the user. Our team implemented and tested both solutions to analyze require-ments within a UAM dataset. This paper will talk about our approaches, implementations, and findings related to both approaches.

systems engineering↗