Search NASA⌕ Search

SEARCH · Search NASA

Results for “VALUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Transmission Value in 2023: Market Data Shows the Value of Transmission Remained High in Certain Locations Despite Overall Low Wholesale Electricity Prices

In 2023 additional electricity transmission would have provided the most value for links that crossed between grid interconnection regions in the United States (the Western Interconnection, the Eastern Interconnection, the Texas Interconnection) or crossed between system operator regions within the same interconnection. Many multi-interconnection or multi-region links had values of greater than $\$20$/MWh, or up to $\$175$ million/yr per 1 GW expanded transmission (subject to limits to the depth of the market at each side of the link). In contrast, many links within regions, or between regions in the northeast, had relatively low values in 2023, following the overall decline in wholesale electricity prices in 2023 compared with 2021-2022. The most valuable link in 2023, at $\$61$ /MWh, was between Texas and the Southwest. Multiple events in 2023 (high natural gas prices in the western U.S., and high summer temperatures in Texas and the Southwest) were observed to have driven this high value. Of particular note, high prices in Texas occurred at a largely distinct set of hours from high prices in the Southwest, helping to drive up the value of transmission in total and demonstrating significant value to both regions. This example demonstrates the unique value of transmission (compared to other solutions, such as building local generation resources) in delivering benefits to multiple regions given its ability to connect areas of the country that inevitably face differing circumstances.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2013

Comparing Capacity Value Estimation Techniques for Photovoltaic Solar Power

In this paper, we estimate the capacity value of photovoltaic (PV) solar plants in the western U.S. Our results show that PV plants have capacity values that range between 52% and 93%, depending on location and sun-tracking capability. We further compare more robust but data- and computationally-intense reliability-based estimation techniques with simpler approximation methods. We show that if implemented properly, these techniques provide accurate approximations of reliability-based methods. Overall, methods that are based on the weighted capacity factor of the plant provide the most accurate estimate. We also examine the sensitivity of PV capacity value to the inclusion of sun-tracking systems.

14 SOLAR ENERGY↗
DOE OSTI2012

Estimating the Capacity Value of Concentrating Solar Power Plants: A Case Study of the Southwestern United States

We estimate the capacity value of concentrating solar power (CSP) plants without thermal energy storage in the southwestern U.S. Our results show that CSP plants have capacity values that are between 45% and 95% of maximum capacity, depending on their location and configuration. We also examine the sensitivity of the capacity value of CSP to a number of factors and show that capacity factor-based methods can provide reasonable approximations of reliability-based estimates.

14 SOLAR ENERGY↗
DOE OSTI2015

Calibration and data collection protocols for reliable lattice parameter values in electron pair distribution function (ePDF) studies

We explore and describe different protocols for calibrating electron pair distribution function (ePDF) measurements for quantitative studies on nano-materials. We find the most accurate approach to determine the camera-length is to use a standard calibration sample of Au nanoparticles from National Institute of Standards and Technology. Different protocols for data collection are also explored, as are possible operational errors, to find the best approaches for accurate data collection for quantitative ePDF studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

What Is the Value of Alternative Methods for Estimating Ramping Needs?

Power system operators procure and deploy flexibility reserves or ramping products to address balancing needs caused by uncertainty and variability of load and generation. Existing methods estimate ramping needs using calendar information and historical forecast errors. Novel methods investigate if real-time weather information could inform ramping and other balancing requirements. This paper compares estimation methods for ramping requirements in theory and practice. The theoretical framework indicates when an alternative method could yield improved economic or reliability performance than existing methods by requiring lower or higher levels of ramping products. Preliminary simulations on a 118-bus test system for 4 days in May 2019 illustrate how system performance improves or deteriorates when ramping requirements are weather-informed (alternative) instead of calendar-based (baseline). Preliminary results suggest high variability in change of performance and underline the impact of additional factors, such as system conditions, on the realized performance change.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2024

Controls on Stable Methane Isotope Values in Northern Peatlands and Potential Shifts in Values Under Permafrost Thaw Scenarios

Abstract Northern peatlands are a globally significant source of methane (CH 4 ), and emissions are projected to increase due to warming and permafrost loss. Understanding the microbial mechanisms behind patterns in CH 4 production in peatlands will be key to predicting annual emissions changes, with stable carbon isotopes (δ 13 C‐CH 4 ) being a powerful tool for characterizing these drivers. Given that δ 13 C‐CH 4 is used in top‐down atmospheric inversion models to partition sources, our ability to model CH 4 production pathways and associated δ 13 C‐CH 4 values is critical. We sought to characterize the role of environmental conditions, including hydrologic and vegetation patterns associated with permafrost thaw, on δ 13 C‐CH 4 values from high‐latitude peatlands. We measured porewater and emitted CH 4 stable isotopes, pH, and vegetation composition from five boreal‐Arctic peatlands. Porewater δ 13 C‐CH 4 was strongly associated with peatland type, with δ 13 C enriched values obtained from more minerotrophic fens (−61.2 ± 9.1‰) compared to permafrost‐free bogs (−74.1 ± 9.4‰) and raised permafrost bogs (−81.6 ± 11.5‰). Variation in porewater δ 13 C‐CH 4 was best explained by sedge cover, CH 4 concentration, and the interactive effect of peatland type and pH (r 2 = 0.50,p < 0.001). Emitted δ 13 C‐CH 4 varied greatly but was positively correlated with porewater δ 13 C‐CH 4 . We calculated a mixed atmospheric δ 13 C‐CH 4 value for northern peatlands of −65.3 ± 7‰ and show that this value is more sensitive to landscape drying than wetting under permafrost thaw scenarios. Our results suggest northern peatland δ 13 C‐CH 4 values are likely to shift in the future which has important implications for source partitioning in atmospheric inversion models.

Environmental Sciences & Ecology↗
DOE OSTI2013

Improved value for the silicon free exciton binding energy

The free exciton binding energy is a key parameter in silicon material and device physics. In particular, it provides the necessary link between the energy threshold for valence to conduction band optical absorption and the bandgap determining electronic properties. The long accepted low temperature binding energy value of 14.7 ± 0.4 meV is reassessed taking advantage of developments subsequent to its original determination, leading to the conclusion that this value is definitely an underestimate. Using three largely independent experimental data sets, an improved low temperature value of 15.01 ± 0.06 meV is deduced, in good agreement with the most comprehensive theoretical calculations to date.

36 MATERIALS SCIENCE↗
DOE OSTI2010

Doping evolution of the absolute value of the London penetration depth and superfluid density in single crystals of Ba(Fe 1-x Co x ) 2 As 2

The zero-temperature value of the in-plane London penetration depth, λ ab (0) , has been measured in single crystals of Ba(Fe 1-x Co x )₂ As₂ as a function of the Co concentration, x , across both the underdoped and overdoped superconducting regions of the phase diagram. For x ≳ 0.047 , λ ab (0) has been found to have values between 120 ± 50 and 300 ± 50 nm . A pronounced increase in λ ab (0) , to a value as high as 950 ± 50 nm , has been observed for x ≲ 0.047 , corresponding to the region of the phase diagram where the itinerant antiferromagnetic and superconducting phases coexist and compete. Direct determination of the doping-dependent λ ab (0) has allowed us to track the evolution of the temperature-dependent superfluid density, from which we infer the development of a pronounced superconducting gap anisotropy at the edges of the superconducting dome.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2011

ESTIMATED NEPTUNIUM SEDIMENT SORPTION VALUES AS A FUNCTION OF PH AND MEASURED BARIUM AND RADIUM KD VALUES

The objective of this document is to provide traceability and justification for a select few new geochemical data used in the Special Analysis entitled 'Special Analysis for the Dose Assessment of the Final Inventories in Center Slit Trenches One through Five'. Most values used in the Special Analysis came from the traditional geochemical data package, however, some recent laboratory measurements have made it possible to estimate barium K{sub d} values. Additionally, some recent calculations were made to estimate neptunium K{sub d} values as a function of pH. The assumptions, justifications, and calculations needed to generate these new values are presented in this document, and the values are summarized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

U.S. Solar Market Value Report: Further Evidence that Solar Adds Value to Real Estate

Solar photovoltaic systems provide cost savings to the property owner in terms of avoided electricity costs that accrue over the system lifetime. From an investment standpoint, the equipment and the value of the energy generated can potentially increase the underlying property value. This first-of-a-kind study presents real market data collected from real estate appraisers using the PV Value® tool to develop a market value for solar as part of a property sale or refinance. Aggregated results at the state level are discussed for California, Arizona and Massachusetts, using 2015 and 2016 data where appraisers used the income capitalization approach to develop a market value for solar. Additional data collection using future transaction data could reveal market-specific trends and insights at the zip code, city and metropolitan statistical area (MSA) levels.

14 SOLAR ENERGY↗
DOE OSTI2012

Capacity Value of Solar Power

Evaluating the capacity value of renewable energy sources can pose significant challenges due to their variable and uncertain nature. In this paper the capacity value of solar power is investigated. Solar capacity value metrics and their associated calculation methodologies are reviewed and several solar capacity studies are summarized. The differences between wind and solar power are examined, the economic importance of solar capacity value is discussed and other assessments and recommendations are presented.

Duignan, Roisin↗
DOE OSTI2018

Portable SHMEMCache: A High-Performance Key-Value Store on OpenSHMEM and MPI

The integration of Big Data frameworks and HPC capabilities has drawn enormous interests in recent years. SHMEMCache is a distributed key-value store built on the OpenSHMEM global address space. It has solved several practical issues in leveraging OpenSHMEM’s one-sided operations for a distributed key-value store and providing efficient key-value operations on both commodity machines and supercomputers. However, being based solely on OpenSHMEM, SHMEMCache cannot leverage one-sided operations from a variety of software packages. This results in several limitations for SHMEMCache. First, we cannot make SHMEMCache available to a wider range of platforms. Second, an opportunity for potential performance improvement is missed. Third, there is a lack of deep understanding about how different one-sided operations can fit in with SHMEMCache and other distributed key-values in general. For example, the one-sided operations in OpenSHMEM and MPI have many differences in their interfaces, memory semantics and synchronization methods, all of which can have distinct implications and also increase the complexity in supporting both OpenSHMEM and MPI for SHMEMCache. Therefore, we have taken on an effort on leveraging different one-sided operations for SHMEMCache and proposed a design of portable SHMEMCache. Based on this new framework, we have supported both OpenSHMEM and MPI for SHMEMCache. We have also conducted an extensive set of experiments to compare the performance of the two versions on both commodity machines and the Titan supercomputer.

Computer Science↗
DOE OSTI2014

Stabilization of prescribed values and periodic orbits with regular and pulse target oriented control

Investigating a method of chaos control for one-dimensional maps, where the intervention is proportional to the difference between a fixed value and a current state, we demonstrate that stabilization is possible in one of the two following cases: (1) for small values, the map is increasing and the slope of the line connecting the points on the line with the origin is decreasing; (2) the chaotic map is locally Lipschitz. Moreover, in the latter case we prove that any point of the map can be stabilized. In addition, we study pulse stabilization when the intervention occurs each m-th step and illustrate that stabilization is possible for the first type of maps. In the context of population dynamics, we notice that control with a positive target, even if stabilization is not achieved, leads to persistent solutions and prevents extinction in models which experience the Allee effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Chemical Upcycling of Polyethylene, Polypropylene, and Mixtures to High-Value Surfactants

Conversion of plastic wastes to fatty acids is an attractive means to supplement the sourcing of these high-value, high-volume chemicals. We report a method for transforming polyethylene (PE) and polypropylene (PP) at ~80% conversion to fatty acids with number-average molar masses of up to ~700 and 670 daltons, respectively. The process is applicable to municipal PE and PP wastes and their mixtures. Temperature-gradient thermolysis is the key to controllably degrading PE and PP into waxes and inhibiting the production of small molecules. The waxes are upcycled to fatty acids by oxidation over manganese stearate and subsequent processing. PP ..beta..-scission produces more olefin wax and yields higher acid-number fatty acids than does PE ..beta..-scission. We further convert the fatty acids to high-value, large-market-volume surfactants. Industrial-scale technoeconomic analysis suggests economic viability without the need for subsidies.

deconstruction↗
DOE OSTI2017

PapyrusKV: a high-performance parallel key-value store for distributed NVM architectures

This paper introduces PapyrusKV, a parallel embedded key-value store (KVS) for distributed high-performance computing (HPC) architectures that offer potentially massive pools of nonvolatile memory (NVM). PapyrusKV stores keys with their values in arbitrary byte arrays across multiple NVMs in a distributed system. PapyrusKV provides standard KVS operations such as put, get, and delete. More importantly, PapyrusKV provides advanced features for HPC such as dynamic consistency control, zero-copy workflow, and asynchronous checkpoint/restart. Beyond filesystems, PapyrusKV provides HPC programmers with a high-level interface to exploit distributed NVM in the system, and it transparently organizes data to achieve high performance. Also, it allows HPC applications to specialize PapyrusKV to meet their specific requirements. We empirically evaluate PapyrusKV on three HPC systems with real NVM devices: OLCF's Summitdev, TACC's Stampede, and NERSC's Cori. Our results show that PapyrusKV can offer high performance, scalability, and portability across these various distributed NVM architectures.

97 MATHEMATICS AND COMPUTING↗