Search NASA⌕ Search

SEARCH · Search NASA

Results for “VORTEX SHEETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

The use of curved higher order panels for vortex sheet modeling

A method is presented for predicting the geometry of a vortex sheet trailing a lift generating wing in its vicinity. It differs from others in that it uses a continuous vorticity distribution rather than discrete vortex filaments. It was found that the results were in good agreement with available experimental data, after the initial cycle of what was to be a relaxation scheme, so that iterations for this end were unnecessary. While the technique is computing intensive, it becomes attractive when used in conjunction with panel methods applications for complete aircraft configurations. The panel method solution needs to be found only once for each streamwise station downstream of the wing. Corrections applied are geometric in nature and are independent of other computational aspects.

Nagati, M. G.↗
NASA NTRS1986

Recent extensions to the free-vortex-sheet theory for expanded convergence capability

A new version of the free vortex sheet formulation is presented which has greatly improved convergence characteristics for a broad range of geometries. The enhanced convergence properties were achieved largely with extended modeling capabilities of the leading edge vortex and the near field trailing wake. Results from the new code, designated FVS-1, are presented for a variety of configurations and flow conditions with emphasis on vortex flap applications.

Luckring, J. M.↗
NASA NTRS1982

Study of highly sweptback wings by the free vortex sheet method

The aerodynamic characteristics of highly sweptback wings with separations induced vortex flows have been numerically investigated using the free vortex sheet method, developed by Boeing Company, under a contract with NASA/Langley Research Center. The models studied included delta and straked wings, and wings with leading edge extensions. Also, PAN-AIR code has been used to design a fixed leading edge extension into a thick delta wing. The theoretical results predicted have been compared with the experimental data wherever available, and the code capabilities and limitations explored. New fuselage effects also have been considered in some cases.

C Subba Reddy↗
NASA NTRS1975

A subvortex technique for the close approach to a discretized vortex sheet

The close-approach problem associated with flow calculation methods based on vortex-lattice theory was examined numerically using two-dimensional discretized vortex sheets. The analysis first yields a near-field radius of approximately the distance apart of the vortices in the lattice; only within this distance from the sheet are the errors arising from the discretization significant. Various modifications to the discrete vortices are then considered with the objective of reducing the errors. This leads to a near-field model in which a vortex splits into an increasing number of subvortices as it is approached. The subvortices, whose strengths vary linearly from the vortex position, are evenly distributed along an interpolated curve passing through the basic vortices. This subvortex technique can be extended to the three-dimensional case and is efficient because the number of vortices is effectively increased, but only where and when needed.

Maskew, B.↗
NASA NTRS1976

A subvortex technique for the close approach to a discretized vortex sheet

The close-approach problem associated with vortex-lattice methods was examined numerically with the objective of calculating velocities at arbitrary points, not just at midpoints, between the vortices. The objective was achieved using a subvortex technique in which a vortex splits into an increasing number of subvortices as it is approached. The technique, incorporated in a two-dimensional potential flow method using "submerged" vortices and sources, was evaluated for a cambered Joukowski airfoil. The method could be extended to three dimensions, and should improve non-linear methods, which calculate interference effects between multiple wings and vortex wakes, and which include procedures for force-free wakes.

Maskew, B.↗
NASA NTRS1973

Theoretical study of lift generated vortex sheets designed to avoid roll up

The random motions of the vortex elements behind a wing that sheds a disturbed, translating array of vortices are analyzed. The analysis indicates that the wake would diffuse and decay rapidly when viscosity is present and would produce small rolling moments on encountering aircraft. It was found that comparable results could also be achieved with an array consisting of vortices that are equal in magnitude but which alternate in sign. This observation indicates that random motion can probably be achieved with a variety of stepped loadings.

Rossow, V. J.↗
NASA NTRS1978

Subsonic longitudinal and lateral-directional static aerodynamic characteristics of a general research fighter configuration employing a jet sheet vortex generator

A configuration concept for developing vortex lift, which replaces the physical wing strake with a jet sheet generated fluid strake, was investigated on a general research fighter model. The vertical and horizontal location of the jet sheet with respect to the wing leading edge was studied over a momentum coefficient range from 0 to 0.24 in the Langley 7- by 10-foot high speed tunnel over a Mach number range from 0.3 to 0.8. The angle of attack range studied was from -2 to 30 deg at sideslip angles of 0, -5, and 5 deg. Test data are presented without analysis.

Huffman, J. K.↗
NASA NTRS1978

Aerodynamic characteristics of a jet sheet vortex generator

A configuration concept for augmenting the lift capability of low aspect ratio, thin wings, typically used on fighter aircraft was investigated. The fluid strake concept uses a jet sheet formed by blowing from a series of small orifices located in the side of the fuselage ahead of the wing to generate a stable vortex flow over the wing at high angle of attack. The effect of the location of the fluid strake relative to the wing was investigated for three different designs of the in-line orifices using a half-span model tested in a 7 by 10 foot low speed tunnel. Based on the results of the low speed test, a jet sheet producing module was incorporated into a NASA general research fighter model and tested in the Langley 7 by 10 foot high speed tunnel to determine the effectiveness of the fluid strake as a lift-enhancement device in the high-speed maneuver regime. Tests were conducted over a Mach number range from 0.3 to 0.8, with a jet momentum coefficient range from 0 to 0.24. Significant lift increments resulted at the higher angles of attack and drag polars were improved.

Ziegler, H.↗
NASA NTRS1961

A Theoretical Investigation of Vortex-Sheet Deformation Behind a Highly Loaded Wing and Its Effect on Lift

The induced drag polar is developed for wt-ngs capable of attaining extremely high loadings while possessing an elliptical distribution of circulation. This development is accomplished through a theoretical investigation of the vortex-wake deformation process and the deduction of the airfoil forces from the impulse and kinetic energy contents of the ultimate wake form. The investigation shows that the induced velocities of the wake limit the maximum lift coefficient to a value of 1.94 times the wing aspect ratio, for aspect ratios equal to or less than 6.5, and that the section properties of the airfoil limit the lift coefficient to 12.6 for aspect ratios greater than 6.5. Relations are developed for the rate of deformation of the vortex wake. It is also shown that linear wing theory is app1icable up to lift coefficients equal to 1.1 times the aspect ratio.

Cone, Clarence D., Jr.↗
NASA NTRS1987

Analysis of induced velocities in the wake of a hovering helicopter rotor

A simple analytical method has been developed to predict the induced velocities at the tip vortex in the wake of a hovering helicopter rotor. The wake model in the analysis includes the blade bound vortex as well as a tip vortex and vortex sheet trailed from each blade. Standard, prescribed wake models were used to describe the geometry of the tip vortex and the vortex sheet. Curved vortex elements were used to model the tip vortices and the vortex sheets. The analysis was used to study the contribution from each wake component to the axial-induced velocity of the tip vortex. Results show a highly variable induced velocity at the tip vortex both before and after the first blade passage. However, the prescribed tip vortex models require a constant axial velocity of the tip vortex. This inconsistency between the prescribed axial velocity of the tip vortex and the velocity that the wake geometry induces on the tip vortex points to a limitation of the current prescribed tip vortex geometry models.

Light, Jeffrey S.↗
NASA NTRS1979

Theoretical study of aerodynamic characteristics of wings having vortex flow

The aerodynamic characteristics of slender wings having separation induced vortex flows are investigated by employing three different computer codes--free vortex sheet, quasi vortex lattice, and suction analogy methods. Their capabilities and limitations are examined, and modifications are discussed. Flat wings of different configurations: arrow, delta, and diamond shapes, as well as cambered delta wings, are studied. The effect of notch ratio on the load distributions and the longitudinal characteristics of a family of arrow and diamond wings is explored. The sectional lift coefficients and the accumulated span loadings are determined for an arrow wing and are seen to be unusual in comparison with the attached flow results. The theoretically predicted results are compared with the existing experimental values.

Reddy, C. S.↗
NASA NTRS1986

Wake shape and its effects on aerodynamic characteristics

The wake shape under symmetrical flight conditions and its effects on aerodynamic characteristics are examined. In addition, the effect of wake shape in sideslip and discrete vortices such as strake or forebody vortex on lateral characteristics is presented. The present numerical method for airplane configurations, which is based on discretization of the vortex sheet into vortex segments, verified the symmetrical and asymmetrical roll-up process of the trailing vortices. Also, the effect of wing wake on tail planes is calculated. It is concluded that at high lift the assumption of flat wake for longitudinal and lateral-directional characteristics should be reexamined.

Emdad, H.↗
NASA NTRS1988

Computational methods for the problems of the tip vortex

The tip vortex problem for helicopter rotors in transonic flow was studied. The first model was that of potential flow past a single blade in parallel transonic flow. The incidence on the wing of a vortex sheet trailing from a blade in front was studied by modeling the incident sheet by a single vortex filament. A 3-D potential flow code was written to incorporate the usual boundary conditions at infinity together with the model of such a vortex filament and to analyze the resulting flow over the wing. The code was used to study the effect of the vortex filament on the production of shocks at the tip of the wing. Another problem studied within the framework of potential flow theory was the rollup of the vortex sheet behind the wing. A comparison was made of flow models described by the potential equation, by the Euler equations for steady flow, and by the Navier-Stokes equations. The question was also studied as to whether there is an advantage in solving the Navier-Stokes equations rather than the Euler equations for steady flow.

Garabedian, Paul R.↗
NASA NTRS1950

Investigation of Downwash, Sidewash, and Mach Number Distribution behind a Rectangular Wing at a Mach Number of 2.41

An investigation of the nature of the flow field behind a rectangular circular-arc wing has been conducted in the Langley 9-inch supersonic tunnel. Pitot- and static-pressure surveys covering a region of flow behind the wing have been made together with detailed pitot surveys throughout the region of the wake. In addition, the flow direction has been measured using a weathercocking vane measurements. Theoretical calculations of the variation of both downwash and sidewash with angle of attack using Lagerstrom's superposition method have been made. In addition the effect of the wing thickness on the sidewash with the wing at 0 angle of attack has been evaluated. Near an angle of attack of 0, agreement between theory and experiment is good, particularly for the downwash results, except in the plane of the wing, inboard of the tip. In this region the proximity of the shed vortex sheet and the departure of the spanwise distribution of vorticity from theory would account for the disagreement. At higher angles of attack prediction of downwash depends on a knowledge of the location of the trailing vortex sheet, in order that the downwash may be corrected for its displacement and distortion. The theoretical location of the trailing vortex sheet, based on the theoretical downwash values integrated downstream from the wing trailing edge, is shown to differ widely from the experimental case. The rolling-up of the trailing vortex sheet behind the wing tip is evidenced by both the wake surveys and the flow-angle measurements.

Adamson, D.↗