Search NASA⌕ Search

SEARCH · Search NASA

Results for “Variational approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Evaluating switch lifetime in soft-switched single-stage differential-mode SST

The reliability of semiconductor switches in single-stage differential-mode solid-state transformers (DM-SSTs) has not been systematically evaluated under soft-switching operation and realistic grid conditions. This paper presents a switch-level reliability analysis for soft-switched and hard-switched DM-SST configurations by integrating converter-specific power loss modeling with empirical lifetime prediction. Analytical derivation of device current profiles specific to the DM-SST is used to characterize electrothermal stress, which is then mapped to lifetime using degradation models obtained from power cycling tests (PCTs). Applied to realistic SST load profiles and grid voltage variations, this approach provides a probabilistic prediction of switch lifetime for the DM-SST. Lifetime estimates for both SiC MOSFETs and Si IGBTs are presented, offering insight into device degradation under converter operating conditions. The results quantify the reliability benefits of soft switching in single-stage SSTs, highlighting how switching dynamics influence long-term switch degradation.

14 SOLAR ENERGY↗
DOE OSTI2025

Sensitivity of the Shallow‐To‐Deep Convective Transition to Moisture and Wind Shear in the Amazon

Deep convection is the primary influence on weather and climate in tropical regions. However, understanding and simulating the shallow‐to‐deep (STD) convective transition has long been challenging. Here, we conduct high‐resolution numerical simulations to assess the environmental controls on the evolution of isolated convection in the Amazon during the wet season. The large‐scale forcing derived through a constrained variational analysis approach for the GoAmazon2014/5 Experiment is used in the simulations. Through sensitivity experiments, we examine the relative importance of moisture and wind shear in controlling the shallow‐to‐deep convective transition for isolated convective events. Convection exhibits the greatest sensitivity to humidity within the lowest 1.5 km, where a 4 mm reduction in column water vapor nearly suppresses ice water formation on deep convective days. In contrast, a reduction in column water vapor in the free troposphere by a factor of two or more is necessary to produce a comparable impact on convection. Increasing low‐level wind speed from 6 to 9 m s -1 enhances afternoon deep convection, raising the cloud ice mixing ratio by approximately 25%. Conversely, upper‐level wind shear reveals the weakest correlation with daytime convection in our simulations. Our results help characterize the role of moisture and wind shear on the STD transition and our understanding of the underlying mechanisms.

environmental controls↗
DOE OSTI2024

Wavelength modulation laser-induced fluorescence for plasma characterization

Laser-Induced Fluorescence (LIF) spectroscopy is an essential tool for probing ion and atom velocity distribution functions (VDFs) in complex plasmas. VDFs carry information about the kinetic properties of species that is critical for plasma characterization. Accurate interpretation of these functions is challenging due to factors such as multicomponent distributions, broadening effects, and background emissions. Our research investigates the use of Wavelength Modulation (WM) LIF to enhance the sensitivity of VDF measurements. Unlike standard Amplitude Modulation (AM) methods, WM–LIF measures the derivative of the LIF signal. This approach makes variations in VDF shape more pronounced. VDF measurements with WM–LIF were investigated with both numerical modeling and experimental measurements. The developed model enables the generation of both WM and AM signals, facilitating comparative analysis of fitting outcomes. Experiments were conducted in a weakly collisional argon plasma with magnetized electrons and non-magnetized ions. Measurements of the argon ion VDFs employed a narrow-band tunable diode laser, which scanned the 4p 4 D 7/2 –3d 4 F 9/2 transition centered at 664.553 nm in vacuum. A lock-in amplifier detected the second harmonic WM signal, which was generated by modulating the laser wavelength with an externally controlled piezo-driven mirror of the diode laser. Finally, our findings indicate that the WM–LIF signal is more sensitive to fitting parameters, allowing for better identification of VDF parameters such as the number of distribution components, their temperatures, and velocities. In addition, WM–LIF can serve as an independent method to verify AM measurements and is particularly beneficial in environments with substantial light noise or background emissions, such as those involving thermionic cathodes and reflective surfaces.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

State preparation of lattice field theories using quantum optimal control

Here, we explore the application of quantum optimal control (QOC) techniques to state preparation of lattice field theories on quantum computers. As a first example, we focus on the Schwinger model, quantum electrodynamics in 1+1 dimensions. We demonstrate that QOC can significantly speed up the ground state preparation compared to gate-based methods, even for models with long-range interactions. Using classical simulations, we explore the dependence on the interqubit coupling strength and the device connectivity, and we study the optimization in the presence of noise. While our simulations indicate potential speedups, the results strongly depend on the device specifications. In addition, we perform exploratory studies on the preparation of thermal states. Our results motivate further studies of QOC techniques in the context of quantum simulations for fundamental physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Neuralized fermionic tensor networks for quantum many-body systems

In this work, we describe a class of neuralized fermionic tensor network states (NN-fTNSs) that introduce nonlinearity into fermionic tensor networks through configuration-dependent neural network transformations of the local tensors. The construction uses the fTNS algebra to implement a natural fermionic sign structure and is compatible with standard tensor network algorithms but gains enhanced expressivity through the neural network parametrization. Using the 1D and 2D Fermi-Hubbard models as benchmarks, we demonstrate that NN-fTNSs achieve order of magnitude improvements in the ground-state energy compared to pure fTNSs with the same bond dimension and can be systematically improved through both the tensor network bond dimension and the neural network parametrization. Compared to existing fermionic neural quantum states based on Slater determinants and Pfaffians, NN-fTNSs offer a physically motivated alternative fermionic structure. Furthermore, compared to such states, NN-fTNSs naturally exhibit improved computational scaling and we demonstrate a construction that achieves linear scaling with the lattice size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Enhancing Short-Range Weather Forecasts through Temporal Variation Encoding: A Multiperiod Embedding Approach

Machine learning (ML) techniques have emerged as promising approaches to improve regional weather forecast accuracy and reliability through data-driven methods. We propose a novel ML-based weather forecasting model, the Multiperiod Embed Net (MPENet). A key distinguishing feature of MPENet is its explicit utilization of the inherent cyclic nature in weather dynamics, unlike the autoregressive strategies commonly used in other ML weather forecasting approaches. Critical cyclic structures are identified via Fourier analyses of dynamic time series. Cyclicity in the convolutional representation is achieved by transforming one-dimensional time series of meteorological variables into two-dimensional tensors based on identified periods. This approach enables the model to leverage intrinsic weather patterns, enhancing regional forecast performance. To demonstrate the effectiveness of MPENet, we conduct a comparative analysis with Nvidia’s FourCastNet. Both models are trained on High-Resolution Rapid Refresh (HRRR) data from 2015 to 2022, over a 192 km × 192 km region in Tennessee. The comparisons are performed locally at two specific locations known to have different weather dynamics due to orographic effects: Crossville, on the relatively flat Cumberland Plateau with fewer topographic airflow disruptions, and Oak Ridge, in the ridge-and-valley region, where airflow is heavily influenced by surrounding valleys and mountains. Our results indicate that FourCastNet achieves strong accuracy at very short lead times, while MPENet maintains competitive skill and shows advantages in capturing temporal evolution over longer periods. Cross-correlation analyses of MPENet and FourCastNet predictions with the HRRR data suggest that encoding critical cyclicity into the network architecture leads to improvements in the forecasting skill.

Artificial intelligence↗
DOE OSTI2024

Longitudinal form Factors of A ≤ 10 Nuclei in a Chiral Effective Field Theory Approach

Here, in this work, we present the elastic electron scattering longitudinal form factors of A ≤ 10 nuclei computed in a variational Monte Carlo approach. We employ the Norfolk family of local chiral interactions and a consistent electromagnetic charge operator. Our calculations are compared both to data and past theoretical evaluations. This work represents, to our knowledge, the first accurate calculation of longitudinal form factors using manybody methods based on interacting nucleon degrees of freedom in the 7 ≤ A ≤ 10 mass range. Finally, we identify 9 Be and 10 B as candidate targets for renewed experimental interest, as they exhibit the potential to provide more stringent constraints on the theoretical models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

CO 2 storage site characterization using ensemble-based approaches with deep generative models

Estimating spatially distributed properties such as permeability from available sparse measurements is a great challenge in efficient subsurface CO 2 storage operations. In this paper, a deep generative model that can accurately capture complex subsurface structure is tested with an ensemble-based inversion method for accurate and accelerated characterization of CO 2 storage sites. We chose Wasserstein Generative Adversarial Network with Gradient Penalty (WGAN-GP) for its realistic reservoir property representation and Ensemble Smoother with Multiple Data Assimilation (ES-MDA) for its robust data fitting and uncertainty quantification capability. WGAN-GP are trained to generate high-dimensional permeability fields from a low-dimensional latent space and ES-MDA then updates the latent variables by assimilating available measurements. Several subsurface site characterization examples including Gaussian, channelized, and fractured reservoirs are used to evaluate the accuracy and computational efficiency of the proposed method and the main features of the unknown permeability fields are characterized accurately with reliable uncertainty quantification. Furthermore, the estimation performance is compared with a widely-used variational, i.e., optimization-based, inversion approach, and the proposed approach outperforms the variational inversion method in several benchmark cases. We explain such superior performance by visualizing the objective function in the latent space: because of nonlinear and aggressive dimension reduction via generative modeling, the objective function surface becomes extremely complex while the ensemble approximation can smooth out the multi-modal surface during the minimization. This suggests that the ensemble-based approach works well over the variational approach when combined with deep generative models at the cost of forward model runs unless convergence-ensuring modifications are implemented in the variational inversion.

42 ENGINEERING↗
DOE OSTI2024

Metrics for quantifying the efficiency of atmospheric CO 2 reduction by marine carbon dioxide removal (mCDR)

Abstract Marine carbon dioxide removal (mCDR) is gaining interest as a tool to meet global climate goals. Because the response of the ocean–atmosphere system to mCDR takes years to centuries, modeling is required to assess the impact of mCDR on atmospheric CO 2 reduction. Here, we use a coupled ocean–atmosphere model to quantify the atmospheric CO 2 reduction in response to a CDR perturbation. We define two metrics to characterize the atmospheric CO 2 response to both instantaneous ocean alkalinity enhancement (OAE) and direct air capture (DAC): the cumulative additionality ( α ) measures the reduction in atmospheric CO 2 relative to the magnitude of the CDR perturbation, while the relative efficiency ( ϵ ) quantifies the cumulative additionality of mCDR relative to that of DAC. For DAC, α is 100% immediately following CDR deployment, but declines to roughly 50% by 100 years post-deployment as the ocean degasses CO 2 in response to the removal of carbon from the atmosphere. For instantaneous OAE, α is zero initially and reaches a maximum of 40%–90% several years to decades later, depending on regional CO 2 equilibration rates and ocean circulation processes. The global mean ϵ approaches 100% after 40 years, showing that instantaneous OAE is nearly as effective as DAC after several decades. However, there are significant geographic variations, with ϵ approaching 100% most rapidly in the low latitudes while ϵ stays well under 100% for decades to centuries near deep and intermediate water formation sites. These metrics provide a quantitative framework for evaluating sequestration timescales and carbon market valuation that can be applied to any mCDR strategy.

Yamamoto, Kana (ORCID:0009000731519234)↗
DOE OSTI2025

Understanding Differences in Water Adsorption Isotherms: Structural Variations, Force Fields, and Monte Carlo Simulation Approaches

Accurate prediction of water adsorption in micro- and mesoporous materials with hydrophobic pores is essential for the design and characterization of advanced adsorbent materials for separation and energy applications. Here, we assess the reproducibility and consistency of water adsorption isotherms in two microporous all-silica MFI zeolite structures (MFI-K and MFI-O) using two different zeolite force fields and three simulation approaches: grand canonical Monte Carlo (GCMC), Gibbs ensemble Monte Carlo (GEMC), and transition matrix Monte Carlo (TMMC). We demonstrate that consistent treatment of the bulk fluid phase in GCMC and TMMC simulations is critical for reconciling isotherms across methods, and we construct simulation-based equations of state for the TIP4P water model to enable rigorous fugacity-to-pressure conversions. Large shifts in the isotherms are observed for two zeolite force fields developed using different parametrization strategies, with the GCS force field representing implicitly a defect-containing all-silica zeolite, whereas the TraPPE-zeo force field accurately represents an essentially defect-free all-silica zeolite. While water in the van Koningsveld structure of MFI exhibits a first-order phase transition and condensation-like step for adsorption near room temperature, water in the Olson structure of MFI displays continuous adsorption, attributed to differences in the adsorption free energy landscapes. Structural analysis reveals that small geometric variations, particularly Si–O–Si bond angles near the strongest adsorption sites, lead to these substantial differences in adsorption behavior. Furthermore, our results highlight the sensitivity of simulated water adsorption isotherms in hydrophobic frameworks to seemingly small differences in the framework structures, force field parametrization, and simulation approaches.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An Agnostic Approach to Building Empirical Type Ia Supernova Light Curves: Evidence for Intrinsic Chromatic Flux Variation Using Nearby Supernova Factory Data

We present a new empirical Type Ia supernova (SN Ia) model with three chromatic flux variation templates: one phase dependent and two phase independent. No underlying dust extinction model or patterns of intrinsic variability are assumed. Implemented with Stan and trained using spectrally binned Nearby Supernova Factory spectrophotometry, we examine this model's 2D, phase-independent flux variation space using two motivated basis representations. In both, the first phase-independent template captures variation that appears dust-like, while the second captures a combination of effectively intrinsic variability and second-order dust-like effects. We find that ≈13% of the modeled phase-independent flux variance is not dust-like. Previous empirical SN Ia models either assume an effective dust extinction recipe in their architecture, or only allow for a single mode of phase-independent variation. The presented results demonstrate such an approach may be insufficient, because it could "leak" noticeable intrinsic variation into phase-independent templates.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Inference of phase field fracture models

The phase field approach to modeling fracture uses a diffuse damage field to represent cracks. This representation mollifies singularities that arise in computations with sharp interface models and some of the resultant difficulties in the mathematical and numerical treatment of fracture. Phase field fracture models have proven effective at representing crack propagation, branching, and merging. Specific formulations, beginning with brittle fracture, have also been shown to converge to classical solutions. Extensions to cover the range of material failure, including ductile and cohesive fracture, lead to an array of possible models. There exists a large body of literature focusing on this class of models and on the impact of model form on the predicted crack evolution. However, there have not been systematic studies into how optimal models may be chosen. Here, we take a first step in this direction by developing formal methods for identification of the best parsimonious model of phase field fracture given full-field data on the damage and deformation fields. We consider some of the main models that have been used for the degradation of elastic response due to damage and its propagation. Our approach builds upon Variational System Identification (VSI), a weak form variant of the Sparse Identification of Nonlinear Dynamics (SINDy). Furthermore, in this first communication we focus on synthetically generated data but we also consider central issues associated with the use of experimental full-field data, such as data sparsity and noise.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Real-Space Pseudopotential Method for the Calculation of Third-Row Elements X-ray Photoelectron Spectroscopic Signatures

X-ray photoelectron spectroscopy (XPS) is a powerful characterization technique that unveils subtle chemical environment differences via core– electron binding energy (CEBE) analysis. We extend the development of realspace pseudopotential methods to calculating 1s, 2s, and 2p 3/2 CEBEs of third-row elements (S, P, and Si) within the framework of Kohn–Sham density-functional theory (KS-DFT). The new approach systematically prevents variational collapse and simplifies core-excited orbital selection within dense energy level distributions. However, careful error cancellation analysis is required to achieve accuracy comparable to all-electron methods and experiments. Combined with real-space KS-DFT implementation, this development enables large-scale simulations with both Dirichlet boundary conditions and periodic boundary conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Investigating the crust of neutron stars with neural-network quantum states

An accurate description of low-density nuclear matter is crucial for explaining the physics of neutron star crusts. In the density range between approximately 0.01 fm −3 and 0.1 fm −3 , matter transitions from neutron-rich nuclei to various higher-density pasta shapes, before ultimately reaching a uniform liquid. In this work, we introduce a variational Monte Carlo method based on a neural Pfaffian-Jastrow quantum state, which allows us to model the transition from the liquid phase to neutron-rich nuclei microscopically. At low densities, nuclear clusters dynamically emerge from the microscopic interactions among protons and neutrons, which we model based on pionless effective field theory. Our variational Monte Carlo approach represents a significant improvement over the state-of-the-art auxiliary-field diffusion Monte Carlo method, which is severely hindered by the fermion-sign problem in this low-density regime and cannot capture the onset of clusters. In addition to computing the energy per particle of symmetric nuclear matter and pure neutron matter, we analyze an intermediate isospin-asymmetry configuration to elucidate the formation of nuclear clusters. We also provide evidence that the presence of such nuclear clusters influences the amount of protons in the crust compared to protons in beta-equilibrated, neutrino-transparent matter.

Nuclear astrophysics↗
DOE OSTI2024

High-precision Galaxy Clustering Predictions from Small-volume Hydrodynamical Simulations via Control Variates

Abstract Cosmological simulations of galaxy formation are an invaluable tool for understanding galaxy formation and its impact on cosmological parameter inference from large-scale structures. However, their high computational cost is a significant obstacle for running simulations that probe cosmological volumes comparable to those analyzed by contemporary large-scale structure experiments. In this work, we explore the possibility of obtaining high-precision galaxy clustering predictions from small-volume hydrodynamical simulations such as MillenniumTNG and FLAMINGO via control variates. In this approach, the hydrodynamical full-physics simulation is paired with a matched low-resolution gravity-only simulation. By learning the galaxy–halo connection from the hydrodynamical simulation and applying it to the gravity-only counterpart, one obtains a galaxy population that closely mimics the one in the more expensive simulation. One can then construct an estimator of galaxy clustering that combines the clustering amplitudes in the small-volume hydrodynamical and gravity-only simulations with clustering amplitudes in a large-volume gravity-only simulation. Depending on the galaxy sample, clustering statistic, and scale, this galaxy clustering estimator can have an effective volume of up to around 100 times the volume of the original hydrodynamical simulation in the nonlinear regime. With this approach, we can construct galaxy clustering predictions from existing simulations that are precise enough for mock analyses of next-generation large-scale structure surveys such as the Dark Energy Spectroscopic Instrument and the Legacy Survey of Space and Time.

Doytcheva, Alexandra (ORCID:0009000111254888)↗
DOE OSTI2025

Anomalous entropy-driven kinetics of dislocation nucleation

The kinetics of dislocation reactions, such as dislocation multiplication, controls the plastic deformation in crystals beyond their elastic limit, therefore critical mechanisms in a number of applications in materials science. We present a series of large-scale molecular dynamics simulations that shows that one such type of reactions, the nucleation of dislocation at free surfaces, exhibit unconventional kinetics, including unexpectedly large nucleation rates under compression, very strong entropic stabilization under tension, as well as strong non-Arrhenius behavior. These unusual kinetics are quantitatively rationalized using a variational transition state theory approach coupled with an efficient numerical scheme for the estimation of vibrational entropy changes. These results highlight the need for a variational treatment of the kinetics to quantitatively capture dislocation reaction kinetics, especially at low-to-moderate strains where large deformations are required to activate reactions. These observations suggest possible explanations to previously observed unconventional deformation kinetics in both molecular dynamics simulations and experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Genetic variation at transcription factor binding sites largely explains phenotypic heritability in maize

Abstract Comprehensive maps of functional variation at transcription factor (TF) binding sites (cis-elements) are crucial for elucidating how genotype shapes phenotype. Here, we report the construction of a pan-cistrome of the maize leaf under well-watered and drought conditions. We quantified haplotype-specific TF footprints across a pan-genome of 25 maize hybrids and mapped over 200,000 variants, genetic, epigenetic, or both (termed binding quantitative trait loci (bQTL)), linked tocis-element occupancy. Three lines of evidence support the functional significance of bQTL: (1) coincidence with causative loci that regulate traits, includingvgt1,ZmTRE1and the MITE transposon nearZmNAC111under drought; (2) bQTL allelic bias is shared between inbred parents and matches chromatin immunoprecipitation sequencing results; and (3) partitioning genetic variation across genomic regions demonstrates that bQTL capture the majority of heritable trait variation across ~72% of 143 phenotypes. Our study provides an auspicious approach to make functionalcis-variation accessible at scale for genetic studies and targeted engineering of complex traits.

Genetics & Heredity↗
DOE OSTI2026

Parametric reduced order models for graded lattice structures

Graded lattice structures, characterized by smoothly varying mechanical properties, hold significant promise for optimizing material distribution in advanced engineering applications. However, accurately modeling these structures poses substantial computational challenges due to the continuous geometric variations within their unit cells. Here, to address these challenges, this paper introduces a novel Efficient Reduced Order Model (EROM) that integrates the Matrix Discrete Empirical Interpolation Method (MDEIM) and Discrete Empirical Interpolation Method (DEIM) with polynomial regression to efficiently manage geometric parametrization in lattice structures. Unlike traditional reduced order models (ROMs) that require extensive precomputed libraries for each geometric configuration, our approach enables continuous geometric variations through a flexible algebraic formulation, significantly reducing computational costs while preserving high accuracy. The method constructs projection matrices for individual unit cells that can be efficiently assembled into global systems, leveraging the repetitive nature of lattice structures. Numerical studies demonstrate that our EROM achieves displacement errors below 1% and von Mises stress prediction errors below 4%, coupled with computational speedups exceeding two orders of magnitude compared to full-order simulations. The proposed method's modularity and scalability make it particularly suitable for design optimization and real-time simulation of functionally graded lattice structures, with applications spanning aerospace to biomedical engineering.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗