Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vertical Profile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Estimating turbulent energy flux vertical profiles from uncrewed aircraft system measurements: exemplary results for the MOSAiC campaign

This study analyzes turbulent energy fluxes in the Arctic atmospheric boundary layer (ABL) using measurements with a small uncrewed aircraft system (sUAS). Turbulent fluxes constitute a major part of the atmospheric energy budget and influence the surface heat balance by distributing energy vertically in the atmosphere. However, only few in situ measurements of the vertical profile of turbulent fluxes in the Arctic ABL exist. The study presents a method to derive turbulent heat fluxes from DataHawk2 sUAS turbulence measurements, based on the flux gradient method with a parameterization of the turbulent exchange coefficient. This parameterization is derived from high-resolution horizontal wind speed measurements in combination with formulations for the turbulent Prandtl number and anisotropy depending on stability. Measurements were taken during the MOSAiC (Multidisciplinary drifting Observatory for the Study of Arctic Climate) expedition in the Arctic sea ice during the melt season of 2020. For three example cases from this campaign, vertical profiles of turbulence parameters and turbulent heat fluxes are presented and compared to balloon-borne, radar, and near-surface measurements. The combination of all measurements draws a consistent picture of ABL conditions and demonstrates the unique potential of the presented method for studying turbulent exchange processes in the vertical ABL profile with sUAS measurements.

54 ENVIRONMENTAL SCIENCES↗

Can Vertical Profiles of Tropospheric Methane on Titan Be Derived from Radio-Occultation Soundings?

The intensity of the received signal at Earth in the radio occultations of Titan is attenuated both by refractive defocusing and pressure-induced absorption from N2-N2 and CH4-N2 pairs. Because the absorption strength is different for the two sets of pairs, matching the retrieved absorptivity profile can in principle yield the vertical variation in gaseous methane in the troposphere. There are two factors that make this difficult. The first is the propagation of noise in the phase and amplitude of the received signal in the absorption retrieval. The phase data is first inverted to retrieve vertical profiles of refractivity, from which the refractive defocusing is calculated. This is then subtracted from the observed. intensity attenuation of the received signal to generate a profile of atmospheric absorption. The second problem is the uncertainty in the pressure-induced absorption coefficients. Laboratory data at radio wavelengths is only available near room temperature (see, e.g., [1] for N2-N2), and the extrapolation to the low temperatures in Titan's troposphere is not well established. Ab initio calculations by Borysow et al. [2, 3] provide absorption coefficients at low temperatures and long wavelengths, but their accuracy has come into question. We present examples from Cassini radio occultations of Titan to illustrate the difficulties. For methane mole fractions in the lower troposphere comparable to that inferred from the Huygens probe (approximately 0.05), it will be difficult to separate the contributions of N2-N2 collisions from those of N2-CH4, collisions to the retrieved absorption. However, higher concentrations of CH4 and/or a higher signal-to-noise ratio from a future uplink experiment could result in a successful separation of the two components. However, key to this are highly accurate estimates of the absorption from a combination of laboratory measurements at love temperatures and long wavelengths, and possibly improved theoretical calculations.

Flasar, F. Michael↗

SAIL Aerosol Vertical Profiles (SAIL-AVP) Field Campaign Report

Aerosols are central to understanding the water cycle within mountainous regions, but a complete understanding of this role cannot be provided without vertically resolved observations, particularly for aerosol-cloud interactions, since we simultaneously need to know aerosol information and meteorology near cloud bases. The goal of SAIL Aerosol Vertical Profiles (SAIL-AVP) was to perform tethered balloon system (TBS) measurements during different seasons to elucidate process-level understanding of the aerosols and associated meteorological conditions within complex mountainous terrain. Measurements were conducted during the deployment of the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility’s second Mobile Facility (AMF2) as part of the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign in the East River Watershed of the Upper Colorado River Basin (UCRB) in southwestern Colorado. In mid-latitude continental interior mountain ranges, and especially at SAIL, aerosol vertical profiles and their relationships with meteorology are, almost without exception, inferred from a combination of ground-based and remote-sensing data. These flights provided many more dimensions to aerosol-cloud interactions that are unavailable to those inferential approaches: the TBS collected in situ information in the vertical, optical, chemical, and biological dimensions for aerosol-cloud interactions. Furthermore, the collocation of these flights with longstanding collaborative resources in the region, including the ongoing surface and subsurface hydrologic observations from the DOE’s Watershed Function Science Focus Area (SFA), produced a unique set of atmospheric observations that are complemented by existing land-surface and subsurface (e.g., groundwater) observations.

54 ENVIRONMENTAL SCIENCES↗

The Rapid-Sampling Vertical Profiler - An evaluation

Evaluation of the Rapid-Sampling Vertical Profiler, which was developed for sampling the hydrophysical fields in the upper ocean from a moving vessel, shows that the instrument is useful for near-microscale measurements of temperature and salinity and also for turbulent kinetic energy dissipation measurements with airfoil probes. A depth of 200 meters is reached from a ship moving at 6 knots. The vertical resolution is 3 cm, the temperature resolution is 0.5 millidegrees, the salinity resolution is 0.6 parts per million, and the sigma-t resolution is 0.0004. (The estimates given for resolution are 99 percent confidence limits on series of 3-cm samples.) The instrument falls with a speed uniform within 20 percent in an orientation within a few degrees of vertical. Vibrations within the dissipation range of turbulence are sufficiently small to permit the measurement of turbulence with airfoil probes in many regions of the ocean.

Caldwell, D. R.↗

Columnar Vertical Profile (CVP) Methodology for Validating Polarimetric Radar Retrievals in Ice Using In Situ Aircraft Measurements

Abstract A novel way to process polarimetric radar data collected via plan position indicator (PPI) scans and display those data in a time–height format is introduced. The columnar vertical profile (CVP) methodology uses radar data collected via multiple elevation scans, limited to data within a set region in range and azimuth relative to the radar, to create vertical profiles of polarimetric radar data representative of that limited region in space. This technique is compared to others existing in the literature, and various applications are discussed. Polarimetric ice microphysical retrievals are performed on CVPs created within the stratiform rain region of two mesoscale convective systems sampled during two field campaigns, where CVPs follow the track of research aircraft. Aircraft in situ data are collocated to microphysical retrieval data, and the accuracy of these retrievals is tested against other retrieval techniques in the literature.

Engineering↗

Black Carbon Vertical Profiles Strongly Affect Its Radiative Forcing Uncertainty

The impact of black carbon (BC) aerosols on the global radiation balance is not well constrained. Here twelve global aerosol models are used to show that at least 20% of the present uncertainty in modeled BC direct radiative forcing (RF) is due to diversity in the simulated vertical profile of BC mass. Results are from phases 1 and 2 of the global aerosol model intercomparison project (AeroCom). Additionally, a significant fraction of the variability is shown to come from high altitudes, as, globally, more than 40% of the total BC RF is exerted above 5 km. BC emission regions and areas with transported BC are found to have differing characteristics. These insights into the importance of the vertical profile of BC lead us to suggest that observational studies are needed to better characterize the global distribution of BC, including in the upper troposphere.

black carbon↗

From the Ground Up: Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) Comparison of Vertical Profiles with 2022 Student Airborne Research Program (SARP) In Situ Data

The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument, installed on the International Space Station (ISS) in 2017, has completed over five years of data collection and the accompanying production of science data products. SAGE III/ISS is a solar and lunar occultation instrument that scans the light from the Sun and Moon through the limb of the Earth’s atmosphere to produce vertical profiles of aerosol, ozone, water vapor, and other trace gasses. This year provided the unique opportunity to compare in situ data collected during the NASA Student Airborne Research Program (SARP) summer airborne campaign with data collected by SAGE III/ISS on coincident overpasses.​ ​ SARP, a summer internship program typically for rising undergraduate seniors, provides students with an opportunity to gain hands-on experience making earth system measurements using NASA’s airborne science platforms. The NASA DC-8 flying laboratory collected in-situ measurements of ozone and other trace gasses during the summer 2022 SARP campaign. While the general focus with SARP is on the airborne research component, this year, a suite of 10 ozonesonde launches spatially and temporally co-located with the research flights collected atmospheric state and in-situ ozone measurements from inland southern California. This presentation shows the results of comparing SAGE III/ISS vertical profiles with those of in situ data collected during the summer 2022 SARP campaign.​

In Situ↗

The Role of In-Cloud Wet Removal in Simulating Aerosol Vertical Profiles and Cloud Radiative Forcing

Among the physical processes controlling aerosol vertical profiles, in-cloud wet removal is of utmost importance while its representation in global climate models (GCMs) is crude. In this study, we implement into the Community Atmosphere Model version 6 (CAM6) a physically based aerosol wet removal parameterization scheme that explicitly treats aerosol activation, removal and resuspension. Evaluation against in-situ observations shows that the default scheme substantially overestimates the upper tropospheric black carbon (BC) and sea salt mass. Our physically based scheme reduces BC and sea salt mass by a factor of 10 and 1,000, respectively, in better agreement with observations. Also, the new scheme slightly increases number of aerosol particles between 12 nm and 4.8 μm in diameter, thereby mitigating the aerosol number underestimation in the default scheme. Our new scheme reduces the overestimation of coarse-mode aerosol (0.5–4.8 μm) number. Overall, the aerosol property changes (mass decrease and number increase) reduce the cloud condensation nuclei (CCN) concentration at low supersaturation (i.e., 0.02% and 0.1%), and increase CCN at high supersaturations (i.e., 0.5% and 1%). Consequently, the global annual mean cloud liquid water path increases by 1.89 g m -2 and the ice water path increases by 0.51 g m -2 . The global annual mean shortwave, longwave, and net cloud radiative forcing change by -1.06, 0.57, and -0.48 W m -2 , respectively. Further improvement is needed to reflect the real physics that the removal efficiencies for aerosol mass and number are disproportionate and to advect cloud-borne (activated) aerosols for a complete aerosol lifecycle.

54 ENVIRONMENTAL SCIENCES↗

Statistical Characterization of Temperature and Pressure Vertical Profiles for the Analysis of Laser Heterodyne Radiometry Data

The statistical analysis of historic pressure and temperature profiles from radiosonde launches for use in the fitting of molecular oxygen line shapes is presented. As the O 2 mixing ratio is nearly constant throughout the lower atmosphere, only variations in pressure and temperature profiles will affect the fit of observed O 2 features in Laser Heterodyne Radiometry (LHR) spectra. Radiosonde temperature and pressure data are extracted from the Integrated Global Radiosonde Archive (IGRA) for a given station, date, and launch time. Data may be extracted for a single launch, for the same date over several years, and/or within a window centered on a target date. The temperature and pressure profiles are further characterized by the statistical variation in coefficients of polynomial fits in altitude. The properties of the probability distributions for each coefficient are used to constrain fits of O 2 line shapes through Nelder–Mead optimization. The refined temperature and pressure profiles are then used in the retrieval of vertically resolved mixing ratios for greenhouse gases (GHGs) measured in the same instrument. In continuous collections, each vertical profile determination may be treated as a Bayesian prior to inform subsequent measurements and provide an estimate of uncertainties.

47 OTHER INSTRUMENTATION↗

Characterizing the Vertical Profile of Aerosol Particle Extinction and Linear Depolarization over Southeast Asia and the Maritime Continent: The 2007-2009 View from CALIOP

Vertical profiles of 0.532 μm aerosol particle extinction coefficient and linear volume depolarization ratio are described for Southeast Asia and the Maritime Continent. Quality-screened and cloud-cleared Version 3.01 Level 2 NASA Cloud Aerosol Lidar with Orthogonal Polarization (CALIOP) 5-km Aerosol Profile datasets are analyzed from 2007 to 2009. Numerical simulations from the U.S. Naval Aerosol Analysis and Predictive System (NAAPS), featuring two-dimensional variational assimilation of NASA Moderate Resolution Imaging Spectroradiometer and Multi-angle Imaging Spectro- Radiometer quality-assured datasets, combined with regional ground-based lidar measurements, are considered for assessing CALIOP retrieval performance, identifying bias, and evaluating regional representativeness. CALIOP retrievals of aerosol particle extinction coefficient and aerosol optical depth (AOD) are high over land and low over open waters relative to NAAPS (0.412/0.312 over land for all data points inclusive, 0.310/0.235 when the per bin average is used and each is treated as single data points; 0.102/0.151 and 0.086/0.124, respectively, over ocean). Regional means, however, are very similar (0.180/0.193 for all data points and 0.155/0.159 when averaged per normalized bin), as the two factors offset one another. The land/ocean offset is investigated, and discrepancies attributed to interpretation of particle composition and a-priori assignment of the extinction-to-backscatter ratio ("lidar ratio") necessary for retrieving the extinction coefficient from CALIOP signals. Over land, NAAPS indicates more dust present than CALIOP algorithms are identifying, indicating a likely assignment of a higher lidar ratio representative of more absorptive particles. NAAPS resolvesmore smoke overwater than identified with CALIOP, indicating likely usage of a lidar ratio characteristic of less absorptive particles to be applied that biases low AOD there. Over open waters except within the Bay of Bengal, aerosol particle scattering is largely capped below 1.5 km MSL, though ground-based lidar measurements at Singapore differ slightly from this finding. Significant aerosol particle presence over land is similarly capped near 3.0 km MSL over most regions. Particle presence at low levels regionally, except over India, is dominated by relatively non-depolarizing particles. Industrial haze, sea salt droplets and fresh smoke are thus most likely present.

linear volume depolarization ratio↗

An evaluation and comparison of vertical profile data from the VISSR Atmospheric Sounder (VAS)

A statistical evaluation is used to compared vertical profiles of temperature and moisture derived from VISSR Atmospheric Sounder (VAS) with three different algorithms to that of corresponding rawinsonde measurements for a clear cold environment. To account for time and space discrepancies between the data sets, rawinsonde data were adjusted to be representative of the satellite sounding times. Both rawinsonde and satellite sounding data were objectively analyzed onto a mesoscale grid. These grid point values were compared at 50 mb pressure increments from the surface up to 100 mb. The data were analyed for horizontal and vertical structure, representatives of derived parameters, and significant departure (improvement) from the apriori (first guess) information. Results indicate some rather strong temperature and moisture biases exist in the satellite soundings. Temperature biases of 1 to 4 C and dewpoint biases of 2 to 6 C generally occur in layers where strong inversions are present and vary with time as these atmospheric features evolve. The biases also changes as a function retrieval scheme suggesting limitations and restrictions on the applications of the various techniques. Standard temperature deviations range from 1 to 2 C for each retrieval scheme with maximum values around 800 and 400 mb. Derived parameters (precipitable water and thickness) suffer from similar biases, though to a somewhat lesser extent. Gradients of basic and derived parameters are generally weaker but have good horizontal structure where magnitudes of the parameters are relatively strong. Integrated thermal (temperature) and moisture (precipitable water) parameters show mixed results.

Jedlovec, G. J.↗

An evaluation and comparison of vertical profile data from the VISSR Atmospheric Sounder (VAS)

A statistical evaluation is used to compared vertical profiles of temperature and moisture derived from VISSR Atmospheric Sounder (VAS) with three different algorithms to that of corresponding rawinsonde measurements for a clear cold environment. To account for time and space discrepancies between the data sets, rawinsonde data were adjusted to be representative of the satellite sounding times. Both rawinsonde and satellite sounding data were objectively analyzed onto a mesoscale grid. These grid point values were compared at 50 mb pressure increments from the surface up to 100 mb. The data were analyzed for horizontal and vertical structure, representatives of derived parameters, and significant departure (improvement) from the apriori (first guess) information. Results indicate some rather strong temperature and moisture biases exist in the satellite soundings. Temperature biases of 1 to 4 C and dewpoint biases of 2 to 6 C generally occur in layers where strong inversions are present and vary with time as these atmospheric features evolve. The biases also changes as a function retrieval scheme suggesting limitations and restrictions on the applications of the various techniques. Standard temperature deviations range from 1 to 2 C for each retrieval scheme with maximum values around 800 and 400 mb. Derived parameters (precipitable water and thickness) suffer from similar biases, though to a somewhat lesser extent. Gradients of basic and derived parameters are generally weaker but have good horizontal structure where magnitudes of the parameters are relatively strong. Integrated thermal (temperature) and moisture (precipitable water) parameters show mixed results.

Jedlovec, G. J.↗

Technique for Obtaining Vertical Profiles of Backscattering and Extinction Cross Sections Using Slant Path Lidar Measurements

A method is presented for solving for vertical profiles of atmospheric particulate extinction and backscattering cross-sections utilizing monostatic lidar slant path measurements. The method is an extension of work by Fernald. It is shown that the number of assumptions necessary for an iterative solution of extinction and backscattering cross sections can be reduced if lidar slant path measurements are used to solve directly for optical depths. The technique is useful only if sufficiently accurate lidar measurements are available. With highly accurate measurements it is also possible to solve directly for extinction cross sections without an iterative solution of a transcendental equation if the proper reduction scheme is used. The required accuracy is discussed and results showing the effect of errors are presented.

Spinhirne, J. D.↗

Measurements of the vertical profile of water vapor abundance in the Martian atmosphere from Mars Observer

An analysis is presented of the Pressure Modulator Infrared Radiometer (PMIRR) capabilities along with how the vertical profiles of water vapor will be obtained. The PMIRR will employ filter and pressure modulation radiometry using nine spectral channels, in both limb scanning and nadir sounding modes, to obtain daily, global maps of temperature, dust extinction, condensate extinction, and water vapor mixing ratio profiles as a function of pressure to half scale height or 5 km vertical resolution. Surface thermal properties will also be mapped, and the polar radiactive balance will be monitored.

Schofield, J. T.↗

Vertical profiles of ozone, carbon monoxide, and dew-point temperature obtained during GTE/CITE 1, October-November 1983

A set of 14 pairs of vertical profiles of ozone and carbon monoxide, obtained with fast-response instrumentation, is presented. Most of these profiles, which were measured in the remote troposphere, also have supporting fast-response dew-point temperature profiles. The data suggest that the continental boundary layer is a source of tropospheric ozone, even in October and November, when photochemical activity should be rather small. In general, the small-scale vertical variability between CO and O3 is in phase. At low latitudes this relationship defines levels in the atmosphere where midlatitude air is being transported to lower latitudes, since lower dew-point temperatures accompany these higher CO and O3 concentrations. A set of profiles which is suggestive of interhemispheric transport is also presented. Independent meteorological analyses support these interpretations.

Fishman, Jack↗

Vertical Profiles of Aerosol Optical Properties Over Central Illinois and Comparison with Surface and Satellite Measurements

Between June 2006 and September 2009, an instrumented light aircraft measured over 400 vertical profiles of aerosol and trace gas properties over eastern and central Illinois. The primary objectives of this program were to (1) measure the in situ aerosol properties and determine their vertical and temporal variability and (2) relate these aircraft measurements to concurrent surface and satellite measurements. Underflights of the CALIPSO satellite show reasonable agreement in a majority of retrieved profiles between aircraft-measured extinction at 532 nm (adjusted to ambient relative humidity) and CALIPSO-retrieved extinction, and suggest that routine aircraft profiling programs can be used to better understand and validate satellite retrieval algorithms. CALIPSO tended to overestimate the aerosol extinction at this location in some boundary layer flight segments when scattered or broken clouds were present, which could be related to problems with CALIPSO cloud screening methods. The in situ aircraft-collected aerosol data suggest extinction thresholds for the likelihood of aerosol layers being detected by the CALIOP lidar. These statistical data offer guidance as to the likelihood of CALIPSO's ability to retrieve aerosol extinction at various locations around the globe.

Sheridan P. J.↗