SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A model K10K resistojet produced by FAKEL Enterprise was evaluated at steady-state conditions with both nitrogen and xenon propellants. Performance and operational characteristics were documented for cold gas and heater power levels up to 8 W at mass flow rates from 0.02 to 0.2 g/s. Maximum specific impulses of 84 s on nitrogen and 49 s on xenon were achieved at the highest specific power levels tested.
The norm of a flexible structure with multiple actuators and sensors is a root-mean-square sum of norms of structures equipped with single sensor and single actuator.
Beryllium, beryllium alloys, beryllium carbide, and carbon are the ingredients of a class of nanophase Be/Be2C/C composite materials that can be formulated and functionally graded to suit a variety of applications. In a typical case, such a composite consists of a first layer of either pure beryllium or a beryllium alloy, a second layer of B2C, and a third layer of nanophase sintered carbon derived from fullerenes and nanotubes. The three layers are interconnected through interpenetrating spongelike structures. These Be/Be2C/C composite materials are similar to Co/WC/diamond functionally graded composite materials, except that (1) W and Co are replaced by Be and alloys thereof and (2) diamond is replaced by sintered carbon derived from fullerenes and nanotubes. (Optionally, one could form a Be/Be2C/diamond composite.) Because Be is lighter than W and Co, the present Be/Be2C/C composites weigh less than do the corresponding Co/WC/diamond composites. The nanophase carbon is almost as hard as diamond. WC/Co is the toughest material. It is widely used for drilling, digging, and machining. However, the fact that W is a heavy element (that is, has high atomic mass and mass density) makes W unattractive for applications in which weight is a severe disadvantage. Be is the lightest tough element, but its toughness is less than that of WC/Co alloy. Be strengthened by nanophase carbon is much tougher than pure or alloy Be. The nanophase carbon has an unsurpassed strength-to-weight ratio. The Be/Be2C/C composite materials are especially attractive for terrestrial and aerospace applications in which there are requirements for light weight along with the high strength and toughness of the denser Co/WC/diamond materials. These materials could be incorporated into diverse components, including cutting tools, bearings, rocket nozzles, and shields. Moreover, because Be and C are effective as neutron moderators, Be/Be2C/C composites could be attractive for some nuclear applications.
Beryllium, beryllium alloys, beryllium carbide, and carbon are the ingredients of a class of nanophase Be/Be2C/C composite materials that can be formulated and functionally graded to suit a variety of applications. In a typical case, such a composite consists of a first layer of either pure beryllium or a beryllium alloy, a second layer of B2C, and a third layer of nanophase sintered carbon derived from fullerenes and nanotubes. The three layers are interconnected through interpenetrating spongelike structures. These Be/Be2C/C composite materials are similar to Co/WC/diamond functionally graded composite materials, except that (1) W and Co are replaced by Be and alloys thereof and (2) diamond is replaced by sintered carbon derived from fullerenes and nanotubes. (Optionally, one could form a Be/Be2C/diamond composite.) Because Be is lighter than W and Co, the present Be/Be2C/C composites weigh less than do the corresponding Co/WC/diamond composites. The nanophase carbon is almost as hard as diamond. WC/Co is the toughest material. It is widely used for drilling, digging, and machining. However, the fact that W is a heavy element (that is, has high atomic mass and mass density) makes W unattractive for applications in which weight is a severe disadvantage. Be is the lightest tough element, but its toughness is less than that of WC/Co alloy. Be strengthened by nanophase carbon is much tougher than pure or alloy Be. The nanophase carbon has an unsurpassed strength-to-weight ratio. The Be/Be2C/C composite materials are especially attractive for terrestrial and aerospace applications in which there are requirements for light weight along with the high strength and toughness of the denser Co/WC/diamond materials. These materials could be incorporated into diverse components, including cutting tools, bearings, rocket nozzles, and shields. Moreover, because Be and C are effective as neutron moderators, Be/Be2C/C composites could be attractive for some nuclear applications.
A thermochemical solar energy storage concept involving the reversible reaction CaO + H2O yields Ca(OH)2 is proposed as a power system element for a lunar base. The operation and components of such a system are described. The CaO/H2O system is capable of generating electric power during both the day and night. The specific energy (energy to mass ratio) of the system was estimated to be 155 W-hr/kg. Mass of the required amount of CaO is neglected since it is obtained from lunar soil. Potential technical problems, such as reactor design and lunar soil processing, are reviewed.
Quantum oscillation of magnetoresistivity in n-type mercury telluride crystals, obtaining electron mass
Explore the source record for details and available documents.
It is proposed by Crooker et al. (1992) that for a subgroup of great geomagnetic storms, for which the associated strong southward IMF (B(S)) fields reside in the postshock plasma, preceding the driver gas of coronal mass ejections, such strong B(S) fields result from a 'major increase in the Russell-McPherron polarity effect, through a systematic pattern of compression and draping' of the Archimedean field in the x-y plane. The critics test the scenario proposed by Crooker et al., namely, that the Russell-McPherron polarity effect is a major contribution to the semiannual variable of intense geomagnetic storms. It is found by the critics that in the cases studied there is little difference between the B(S) values as measured in geocentric solar ecliptic and geocentric solar magnetospheric coordinates, and it is concluded that the Russell-McPherron mechanism cannot explain by itself the seasonal dependence of intense storms, for which the variation is the largest. Crooker et al. present arguments to show that the combined preshock and postshock Russell-McPherron effect remains the sole cause of the semiannual variation of great storm occurrence.
Introduction of ions into region of strong fields within quadrupole mass filter
The atmospheric mixing ratios of CCl2F2 (F-12) and CCl3F (F-11) increase abruptly up to 14 ppt (F-12) and 8 ppt (F-11) after strong cold fronts pass and decrease abruptly after warm fronts pass at a semicontinuous monitoring station near Pullman, WA (46 deg 42 min N, 117 deg 10 min W). It is concluded that air masses from higher latitudes (above 60 deg N) can have F-12 and/or F-11 concentrations as much as 5 percent higher than mid-latitude air masses. Conversely, nitrous oxide shows no significant changes during frontal passages and is uniformly distributed between air masses.
Gradual solar energetic ( E>10 MeV ) particle (SEP) events and metric through kilometric wavelength type II radio bursts are usually associated with shocks driven by fast ( V > 900 kms-1 ) and wide ( W>60deg ) coronal mass ejections (FW CMEs). This criterion was established empirically by several studies from solar cycle 23. The characteristic Alfven speed in the corona, which ranges over 500-1500 kms-1 at heights > 2 Ro, provides the minimum V requirement for a CME to drive a shock, but the general absence of SEP events or type II bursts with fast and narrow ( W<60deg ) CMEs has not been explained. We review and confirm the earlier studies with a more comprehensive comparison of SEP events and type II bursts with fast and narrow (FN) CMEs. We offer an explanation for the lack of SEP event and type II burst associations with FN CMEs in terms of recent heuristic arguments and modeling that show that the response of a magnetized plasma to the propagation of a CME depends on the CME geometry as well as on its speed. A clear distinction is made between a projectile that propagates through the medium to produce a bow shock, and a 3D piston that everywhere accumulates material to produce a broad shock and sheath. The bow shock is unfavorable for producing SEP events and type II bursts, but the 60 deg cut-off is not explained.
Mass spectrometric stable isotope dilution method for barium determination in G-1 and W-1 rock standards
The mass and power of a heterodyne spectrometer must be greatly reduced to satisfy small space mission constraints. We report on a 220 GHz receiver, requiring less than 4.8 W, with a mass of 1.25 kg. The mass and power savings are achieved through reducing components to a minimum, while providing performance for a Martian atmospheric sounder.
Sublimators have been proposed and used in spacecraft for heat rejection. Sublimators are desirable heat rejection devices for short duration use because they can transfer large amounts of heat using little mass and are self-regulating devices. Sublimators reject heat into space by freezing water inside a porous substrate, allowing it to sublimate into vapor, and finally venting it into space. The state of the art thermal control system in orbiting spacecraft is a two loop, two fluid system. The external coolant loop typically uses a toxic single phase fluid that acquires heat from the spacecraft and rejects most of it via a radiator. The sublimator functions as a transient topper for orbiting spacecraft during day pass periods when radiator efficiency decreases. The sublimator interfaces with the internal loop through a built in heat exchanger. The internal loop fluid is non-toxic and is typically a propylene glycol and water solution with inhibitors to prevent corrosion with aluminum fins of the heat exchangers. Feedwater is supplied from a separate line to the sublimator to maintain temperature control of the cabin and vehicle hardware. Water membrane evaporators have been developed for spacecraft and spacesuits. They function similar to a sublimator but require a backpressure valve which could be actuated for this application with a simple fully open or fully closed modes. This technology would be applied to orbital thermal control (lunar or planetary). This paper details a trade study showing that evaporators would greatly reduce the consumable that is used, effectively wasted, by sublimators during start up and shut down during the topping phases of each orbit. State of the art for 9 kW sublimators reject about 870 W per kilogram of mass and 1150 W per liter of volume. If water with corrosion inhibitors is used the evaporators would be about 80% of the mass and volume of the equivalent system. The size and mass increases to about 110% if the internal fluid is 50% propylene glycol/50% water. The true benefit comes from the backpressure valve, that prevents the cyclical shutdown/startup loss of the sublimator and amounts to as much as 0.85 kg per orbit.
Ion introduction into strong field region of quadropole mass spectrometer
Ion introduction into strong fields of quadrupole mass spectrometer
Introduction of ions into strong fields within quadrupole mass spectrometer
Photolysis of gaseous and liquid benzene, analyzing gaseous products by gas chromatography and mass spectrometry