SEARCH · Search NASA
Results for “WRF model”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Urban weather modeling using WRF: linking physical assumptions, code implementation, and observational needs
The Weather Research and Forecasting (WRF) model includes urban schemes that simulate the influence of urban surfaces on the atmosphere using parameterizations for flux, and radiative exchanges. Three core schemes – the Bulk urban parameterization, Single-Layer Urban Canopy Model (SLUCM), and Multi-Layer Urban Canopy Model (MLUCM) – represent increasing levels of complexity. Although the parameterizations within these urban schemes are described in the literature, their specific implementation remains poorly documented, thus slowing down model development efforts. This manuscript provides a roadmap to the three urban schemes in WRF version 4.5.2, presenting equations using the same symbols as in the model code, along with references to code lines, and including graphics and explanations that connect the code to its physical foundations. Our thorough review of the urban parameterizations implemented in WRF version 4.5.2 highlighted a handful of parameters that may introduce discontinuities in simulations: (i) in the SLUCM, a 1 mm h −1 rain rate threshold is employed to switch between two minimum moisture availability parameterizations, thus impacting latent heat flux calculations; (ii) in the SLUCM a threshold is used to partition shortwave radiation into direct and diffuse components; (iii) in all three urban schemes, the bulk Richardson number is employed to select the similarity function, which influences the vertical distribution of heat and momentum. We also identified a highly simplified treatment of the radiative balance on roof surfaces. The implications of these simplifications can be assessed through targeted observations across relevant conditions, including varying precipitation rates, cloud cover, and transitions between stability regimes. Furthermore, the widespread application of the Monin-Obukhov similarity theory in these urban schemes warrants model evaluation under highly stable and unstable conditions and in heterogeneous urban settings with variable land cover and building heights on scales finer than model resolution. To address these challenges, we offer guidance on observational strategies, emphasizing the need for multi-parametric measurements to capture potential compensating biases and multi-height measurements that align with the levels where quantities are diagnostic and prognosed in the model (i.e., the lowest atmospheric level of the WRF model). Finally, our inspection of the code revealed implementation bugs that have now been corrected in WRF versions 4.6.0 and 4.6.1. Sensitivity tests over the Atlanta urban area show that these corrections affect surface temperatures, underscoring the importance of performing rigorous documentation and verification of the implementation of parameterizations in model code.
2023 National Offshore Wind data set (NOW-23)
The 2023 National Offshore Wind data set (NOW-23) is the latest wind resource data set for offshore regions in the United States, which supersedes, for its offshore component, the Wind Integration National Dataset (WIND) Toolkit, which was published about a decade ago and is currently one of the primary resources for stakeholders conducting wind resource assessments in the continental United States. The NOW-23 data set was produced using the Weather Research and Forecasting Model (WRF) version 4.2.1. A regional approach was used: for each offshore region, the WRF setup was selected based on validation against available observations. The WRF model was initialized with the European Centre for Medium Range Weather Forecasts 5 Reanalysis (ERA-5) data set, using a 6-hour refresh rate. The model is configured with an initial horizontal grid spacing of 6 km and an internal nested domain that refined the spatial resolution to 2 km. The model is run with 61 vertical levels, with 12 levels in the lower 300m of the atmosphere, stretching from 5 m to 45 m in height. The MYNN planetary boundary layer and surface layer schemes were used the North Atlantic, Mid Atlantic, Great Lakes, Hawaii, and North Pacific regions. On the other hand, using the YSU planetary boundary layer and MM5 surface layer schemes resulted in a better skill in the South Atlantic, Gulf of Mexico, and South Pacific regions. A more detailed description of the WRF model setup can be found in the WRF namelist files linked at the bottom of this page. For all regions, the NOW-23 data set coverage starts on January 1, 2000. For Hawaii and the North Pacific regions, NOW-23 goes until December 31, 2019. For the South Pacific region, the model goes until 31 December, 2022. For all other regions, the model covers until December 31, 2020. Outputs are available at 5 minute resolution, and for all regions we have also included output files at hourly resolution. The NOW-23 data are provided here as HDF5 files. Examples of how to use the HSDS Service to Access the NOW-23 files are linked below. A list of the variables included in the NOW-23 files is also linked below. No filters have been applied to the raw WRF output.
Mesoscale Modeling to Characterize Eagle Soaring Habitat
Uncovering drivers of risk is crucial to understanding interactions between wildlife and wind turbines, and identifying options for impact minimization. These drivers tie to co-variates linked to behavior and movement patterns that allow us to estimate locations and periods of risk. For volant species, atmospheric flow can have significant influence on flight patterns. For obligate soaring birds, like golden eagles, updraft velocities can inform where eagles are likely to travel, at what altitude, and where conditions are not likely sufficient to sustain soaring flight. This has been an active area of study in recent years, using relatively coarse atmospheric data generally at the 20km x 20km scale or larger. Leveraging a 20-year dataset from the Weather Research and Forecasting Model (WRF) (https://www.mmm.ucar.edu/weather-research-and-forecasting-model), we are quantifying vertical velocities across the continental United States at a 2km x 2km resolution. Wind resource data sets originally were static maps showing the mean annual wind speed over an area. However, for these data sets to be optimally used for various applications they must be high-resolution time series, seamlessly span large geographic contexts, and account for uncertainty in wind speed. The National Renewable Energy Laboratory is producing public available datasets that meet these criteria and will be bias corrected to yield the most accurate wind resource data. This effort is an augment to the current WIND Toolkit which houses a high resolution data set. In the new iteration of the WIND Toolkit, a 20-year dataset will be used to improve the accuracy and estimate uncertainty using ensemble and machine-learning techniques. The resulting product will be the most accurate dataset of its size and at a 2km x 2km spatial and 5-minute temporal resolution. Through this work, a mesoscale vertical velocity layer will be produced by calculating the likelihood of orographic updraft and thermal updraft conditions across the continental United States. Specifically, we will use WRF model output combined with digital elevation maps to predict updrafts and then determine if vertical velocities are sufficient to support Golden Eagle soaring and gliding. Ultimately this data layer will be made available as a GIS layer in the Wind Prospector (maps.nrel.gov/wind-prospector/) tool or a similar framework. Data that will be incorporated include wind speed, direction temperature, relative humidity, barometric pressure, air density, precipitation rate, solar radiation, atmospheric stability, skin temperature, and upward heat flux. These products will advance research on interactions between volant species and wind energy by providing open access to highly resolved data with uncertainty quantification not previously available at this scale.
A new parameterization of ice heterogeneous nucleation coupled to aerosol chemistry in WRF-Chem model version 3.5.1: evaluation through ISDAC measurements
In the Arctic, during polar night and early spring, ice clouds are separated into two leading types of ice clouds (TICs): (1) TIC1 clouds characterized by a large concentration of very small crystals and TIC2 clouds characterized by a low concentration of large ice crystals. Using a suitable parameterization of heterogeneous ice nucleation is essential for properly representing ice clouds in meteorological and climate models and subsequently understanding their interactions with aerosols and radiation. Here, we describe a new parameterization for ice crystal formation by heterogeneous nucleation in water-subsaturated conditions coupled to aerosol chemistry in the Weather Research and Forecasting model coupled with chemistry (WRF-Chem). The parameterization is implemented in the Milbrandt and Yau (2005a, b) two-moment cloud microphysics scheme, and we assess how the WRF-Chem model responds to the run-time interaction between chemistry and the new parameterization. Well-documented reference cases provided us with in situ data from the spring 2008 Indirect and Semi-Direct Aerosol Campaign (ISDAC) over Alaska. Our analysis reveals that the new parameterization clearly improves the representation of the ice water content (IWC) in polluted or unpolluted air masses and shows the poor performance of the reference parameterization in representing ice clouds with low IWC. The new parameterization is able to represent TIC1 and TIC2 microphysical characteristics at the top of the clouds, where heterogenous ice nucleation is most likely occurring, even with the known bias of simulated aerosols by WRF-Chem over the Arctic.
High-Resolution Wind Resource Data Set of the Greater Puerto Rico Region
In February 2022, the U.S. Department of Energy and six national laboratories launched the Puerto Rico Grid Resilience and Transitions to 100% Renewable Energy Study (PR100). PR100 aims to provide a comprehensive analysis of possible pathways for Puerto Rico's energy future, with a goal of 100% renewable energy by 2050. As a part of the renewable energy potential assessment in this project, we developed 20 years (2001-2020) of data using a numerical weather prediction (NWP) model for onshore and offshore wind resource assessment for the Puerto Rico. The research steps in developing the long-term wind resource data sets based on the NWP model were: 1. Model wind resource based on the Weather Research and Forecasting (WRF) model. 2. Develop WRF model configurations for Puerto Rico. 3. Test WRF with 11 different physics parameterizations for planetary boundary layer (PBL). 4. Assess WRF output from the different PBL schemes against observations. 5. Select a final model configuration which can produce the modeled wind speed with sufficient accuracy. 6. Produce 20 years wind resource data sets for Puerto Rico region. In the first stage of our framework for developing wind resource data, we developed a WRF model configuration using two nested domains (9 km and 3 km) to cover Puerto Rico and U.S. Virgin Islands and downscale the ERA5 reanalysis data (0.25 degrees x 0.25 degrees; hourly interval) to a 3-km domain. For the second stage, we implemented one-year simulations focused on using 11 different PBL physics parameterizations to find a combination of WRF physics parameterizations that could provide accurately modeled wind speed for Puerto Rico. We also analyzed the sensitivity of the modeled wind speed to PBL schemes for onshore and offshore locations. The WRF output resulting from the 11 WRF experiments using different PBL parameterizations were evaluated against observations obtained from the National Data Buoy Center (NDBC) as well as at hub height for a location for which measurements were available. A final model setup selected through the validation with observational data was used to produce 20 years of data with 3-km spatial and 5-minute temporal resolution. The WRF model output was post-processed to include wind profiles and basic atmospheric variables in a format that can be easily used for downstream modeling. The 20 years of wind resource data will be made available through NREL and support the estimation of wind energy development costs for the PR100 study.
Horne et al. (2026) supporting files - WRF-LES model outputs for a summer heatwave event on June 2025 in Baltimore, MD
Brief Description Shown is the supporting information for Horne et al. (2026). These files include all outputs from the WRF model simulations and the observational datasets used for comparison in the study. Scripts are provided so users can recreate the manuscript's figures using the provided observational and modeling data. For more information regarding the study, please contact the primary author of the associated manuscript, Jason Horne. Horne, J. P., Pan, Y., Davis, K. J., Waugh, D., Ahlswede, B. J., Prince, N. E. (2026). Simulating near-surface environments in urban neighborhoods using WRF-LES: A case study of classic atmospheric boundary layer (ABL) during a heatwave event JAMES. (to be submitted)
Horne et al. (2026) supporting files - WRF-LES model outputs for a summer heatwave event on June 2025 in Baltimore, MD
Brief Description Shown is the supporting information for Horne et al. (2026). These files include all outputs from the WRF model simulations and the observational datasets used for comparison in the study. Scripts are provided so users can recreate the manuscript's figures using the provided observational and modeling data. For more information regarding the study, please contact the primary author of the associated manuscript, Jason Horne. Horne, J. P., Pan, Y., Davis, K. J., Waugh, D., Ahlswede, B. J., Prince, N. E. (2026). Simulating near-surface environments in urban neighborhoods using WRF-LES: A case study of classic atmospheric boundary layer (ABL) during a heatwave event JAMES.
Implementing and Improving CBMZ-MAM3 Chemistry and Aerosol Modules in the Regional Climate Model WRF-CAM5: An Evaluation over the Western US and Eastern North Pacific
The representation of aerosols in climate-chemistry models is important for air quality and climate change research, but it can require significant computational resources. The objective of this study was to improve the representation of aerosols in climate–chemistry models, specifically in the carbon bond mechanism, version Z (CBMZ), and modal aerosol modules with three lognormal modes (MAM3) in the WRF-CAM5 model. The study aimed to enhance the model’s chemistry capabilities by incorporating biomass burning emissions, establishing a conversion mechanism between volatile organic compounds (VOCs) and secondary organic carbons (SOCs), and evaluating its performance against observational benchmarks. The results of the study demonstrated the effectiveness of the enhanced chemistry capabilities in the WRF-CAM5 model. Six simulations were conducted over the western U.S. and northeastern Pacific region, comparing the model’s performance with observational benchmarks such as reanalysis, ground-based, and satellite data. The findings revealed a significant reduction in root-mean-square errors (RMSE) for surface concentrations of black carbon (BC) and organic carbon (OC). Specifically, the model exhibited a 31% reduction in RMSE for BC concentrations and a 58% reduction in RMSE for OC concentrations. These outcomes underscored the importance of accurate aerosol representation in climate-chemistry models and emphasized the potential for improving simulation accuracy and reducing errors through the incorporation of enhanced chemistry modules in such models.
Characterization of oceanic post-cold frontal clouds and their model representation. Final report
Low-level clouds are ubiquitous over the oceans, and their impact on the Earth’ radiative budget is important. However, general circulation models (GCMs) that are used to represent our climate and its evolution still experience problems to represent their correct amount and radiative impact. In the extratropical latitudes (~30-60 N/S), cloud properties are strongly modulated by the occurrence of anti-cyclones (high pressure systems) and cyclones (low pressure systems). While deep clouds dominate in cyclones near the center and along the cold and warm fronts, low-level clouds populate the colder regions of the cyclones, and more specifically the region in the wake of the cold fronts, the post-cold frontal region (PCF). The GCMs mentioned above were found to underestimate the amount of these PCF clouds, and this caused errors in their representation of the amount of solar radiation at the surface of the southern hemisphere oceans, causing an excess in absorption and errors in long-term predictions. To better understand which processes are ill-represented in the GCMs to cause such issues, we used ground-based observations from the Eastern North Atlantic (ENA) ARM site and a high resolution regional model (called WRF) to examine the properties of PCF clouds. With the WRF model, we simulated the passage of a cold front at the ENA site using theoretically distinct representations of convection and the physics of the boundary layer. While these physical representations had little impact on the timing, structure and circulation of the cold front, we found a high sensitivity to how the large scale information was fed into the model. Errors rapidly developed if the incoming flow information was injected too far from the site, but 1000 km was found to be an optimal distance between the outer boundary and the ENA site for a realistic cold front passage. With this model, we then conducted a series of experiment where convection and boundary layer schemes were changed, and revealed that 1) the clouds were more sensitive to the convection than boundary layer schemes and 2) the interaction between the two has a large impact. Furthermore, changing the representation of the physics in the model had greater impacts on PCF clouds than changing the initial conditions. As large-scale models increase their spatial resolution, convection will eventually be resolved but it remains that their representation of the physics of the boundary layer will matter for the correct representation of shallow (low-level) clouds. Observations were used to find which large-scale information had a clear relationship with PCF cloud and precipitation properties, in view of helping with GCM parameterizations and evaluation. Both lower troposphere stability and surface forcing were found to be important for PCF clouds that experience more vigorous dynamics than their tropical or subtropical counterparts. For cloud base and top heights, a simple measure of the change in potential temperature between the surface and the 800 hPa was found to be a good predictor. This relationship was found to hold as well when using data from campaigns recently conducted in the southern ocean south of Tasmania. A recent GCM was found to succeed in representing similar relations. For cloud depth, water content, and different characteristics of precipitation both the temperature contrast between the surface and near-air and the near-surface wind speed had a strong relationship. To summarize, through observational constraints and regional model experiments, the project has provided guidance to evaluate GCMs and tools to improve their representation of low-level clouds in the extratropics. It has also highlighted differences in behavior between these clouds and those typically found in the subtropics, thus opening new avenues of research for shallow clouds in general.
Building heights and urban canopy parameters for urban modeling
GLObal Building heights for Urban Studies (UT-GLOBUS) is a random forest model based framework that provides a level-of-detail-1 (LoD-1) building height dataset. The primary objective of UT-GLOBUS is not to precisely predict the height and footprint of individual buildings, but rather to offer a functional framework for generating building level information using open-source datasets for modeling applications. Specifically, UT-GLOBUS is tailored to meet the requirements of deriving urban canopy parameters (UCPs) for the multi-layer model within the Weather Research and Forecasting (WRF) model and building heights for the SOLWEIG and SUEWS model. Building-level data is accessible in vector file format (GeoPackage: .gpkg), which can be converted into raster file format (geoTIFF). The vector files employ the Universal Transverse Mercator (UTM) projection. The vector files are compatible with GIS platforms like QGIS and ArcGIS, and can be imported for analysis using programming languages such as Python. We are also providing UCPs required by the multi-layer urban model in the urban WRF in binary file format. Additionally, we provide the urban fractions calculated using ESA world cover dataset (https://esa-worldcover.org/en) for WRF model in binary file format. These binary files can be directly incorporated into the WRF pre-processing system (WPS).
Integrating a Water Tracer Model Into WRF‐Hydro for Characterizing the Effect of Lateral Flow in Hydrologic Simulations
Abstract Most current land models approximate terrestrial hydrological processes as one‐dimensional vertical flow, neglecting lateral water movement from ridges to valleys. Such lateral flow is fundamental at catchment scales and becomes crucial for finer‐scale land models. To test the effect of incorporating lateral flow toward three‐dimensional representations of hydrological processes in the next generation land models, we integrate a water tracer model into the WRF‐Hydro framework to track water movement from precipitation to discharge and evapotranspiration. This hydrologic‐tracer integrated system allows us to identify the key mechanisms by which lateral flow affects the flow paths and transit times in WRF‐Hydro. By comparing modeling experiments with and without lateral routing in two contrasting catchments, we determine the impacts of lateral flow on the transit times of precipitation event‐water. Results show that with limited hydrologic connectivity, lateral flow extends the transit times by reducing (increasing) event‐water drainage loss (accumulation) in ridges (valleys) and allowing reinfiltration of infiltration‐excess flow, which is missing in most land models. On the contrary with high hydrologic connectivity, lateral flow can effectively accelerate the water release to streams and reduce the transit time. However, the transit times are substantially underestimated by the model compared with isotope‐derived estimates, indicating model limitations in representing flow paths and transit times. This study provides some insights on the fundamental differences in terrestrial hydrology simulated by land models with and without lateral flow representation.
Studying Cloud and Radiative Impacts Through an Improved Physically Based Representation of Organic Aerosol in a Large-Scale Model (WRF-Chem) (Final Report)
The work performed under this award resulted in the development of a computationally-efficient kinetic model to simulate the chemistry, thermodynamics, and microphysics of organic aerosol. Versions of the kinetic model were used to study a suite of aerosol processes including, multigenerational gas-phase chemistry, phase-state influenced gas/particle partitioning, heterogeneous oxidation, oligomerization reactions, and experimental artifacts. The kinetic model has now been implemented into a regional chemistry-climate model (WRF-Chem) to further study the formation, evolution, properties, and spatiotemporal distribution of organic aerosol at urban, regional, and global scales.
Mesoscale to Microscale Simulations over Complex Terrain with the Immersed Boundary Method in the Weather Research and Forecasting Model
Improvements to the Weather Research and Forecasting (WRF) Model are made to enable multiscale simulations over highly complex terrain with dynamically downscaled boundary conditions from the mesoscale to the microscale. Over steep terrain, the WRF Model develops numerical errors that are due to grid deformation of the terrain-following coordinates. An alternative coordinate system, the immersed boundary method (IBM), has been implemented into WRF, allowing for simulations over highly complex terrain; however, the new coordinate system precluded nesting within mesoscale simulations using WRF’s native terrain-following coordinates. Here, the immersed boundary method and WRF’s grid-nesting framework are modified to seamlessly work together. This improved framework for the first time allows for large-eddy simulation over complex (urban) terrain with IBM to be nested within a typical mesoscale WRF simulation. Simulations of the Joint Urban 2003 field campaign in Oklahoma City, Oklahoma, are performed using a multiscale five-domain nested configuration, spanning horizontal grid resolutions from 6 km to 2 m. These are compared with microscale-only simulations with idealized lateral boundary conditions and with observations of wind speed/direction and SF 6 concentrations from a controlled release from intensive observation period 3. The multiscale simulation, which is configured independent of local observations, shows similar model skill predicting wind speed/direction and improved skill predicting SF 6 concentrations when compared with the idealized simulations, which require use of observations to set mean flow conditions. Use of this improved multiscale framework shows promise for enabling large-eddy simulation over highly complex terrain with dynamically downscaled boundary conditions from mesoscale models.
Impact of Urban Representation on Simulation of Hurricane Rainfall
Abstract Taking the examples of Hurricane Florence (2018) over the Carolinas and Hurricane Harvey (2017) over the Texas Gulf Coast, the study attempts to understand the performance of slab, single‐layer Urban Canopy Model (UCM), and Building Environment Parameterization (BEP) in simulating hurricane rainfall using the Weather Research and Forecasting (WRF) model. The WRF model simulations showed that for an intense, large‐scale event such as a hurricane, the model quantitative precipitation forecast over the urban domain was sensitive to the model urban physics. The spatial and temporal verification using the modified Kling‐Gupta efficiency and Method for Object based Diagnostic and Evaluation in Time Domain suggests that UCM performance is superior to the BEP scheme. Additionally, using the BEP urban physics scheme over UCM for landfalling hurricane rainfall simulations has helped simulate heavy rainfall hotspots.
Meso- to microscale modeling of atmospheric stability effects on wind turbine wake behavior in complex terrain
Abstract. Terrain-induced flow phenomena modulate wind turbine performance and wake behavior in ways that are not adequately accounted for in typical wind turbine wake and wind plant design models. In this work, we simulate flow over two parallel ridges with a wind turbine on one of the ridges, focusing on conditions observed during the Perdigão field campaign in 2017. Two case studies are selected to be representative of typical flow conditions at the site, including the effects of atmospheric stability: a stable case where a mountain wave occurs (as in ∼ 50 % of the nights observed) and a convective case where a recirculation zone forms in the lee of the ridge with the turbine (as occurred over 50 % of the time with upstream winds normal to the ridgeline). We use the Weather Research and Forecasting Model (WRF), dynamically downscaled from the mesoscale (6.75 km resolution) to microscale large-eddy simulation (LES) at 10 m resolution, where a generalized actuator disk (GAD) wind turbine parameterization is used to simulate turbine wakes. We compare the WRF–LES–GAD model results to data from meteorological towers, lidars, and a tethered lifting system, showing good qualitative and quantitative agreement for both case studies. Significantly, the wind turbine wake shows different amounts of vertical deflection from the terrain and persistence downstream in the two stability regimes. In the stable case, the wake follows the terrain along with the mountain wave and deflects downwards by nearly 100 m below hub height at four rotor diameters downstream. In the convective case, the wake deflects above the recirculation zone over 40 m above hub height at the same downstream distance. Overall, the WRF–LES–GAD model is able to capture the observed behavior of the wind turbine wakes, demonstrating the model's ability to represent wakes over complex terrain for two distinct and representative atmospheric stability classes, and, potentially, to improve wind turbine siting and operation in hilly landscapes.
Urban-Scale Heat Wave Visualization: WRF-UCM modeling in Los Angeles, California
This visualization includes an E3SM-based animation of temperatures in North America during the July 2018 heat wave, followed by a higher resolution focus over Los Angeles using the WRF-UCM model to illustrate neighborhood-scale temperatures that account for urban features like buildings, waste heat, and vegetation, as well as sea breeze impacts. Finally, we show the potential impact of cool roofs to reduce temperatures.
Influences of Cloud Microphysics on the Components of Solar Irradiance in the WRF-Solar Model
An accurate forecast of Global Horizontal solar Irradiance (GHI) and Direct Normal Irradiance (DNI) in cloudy conditions remains a major challenge in the solar energy industry. This study focuses on the impact of cloud microphysics on GHI and its partition into DNI and Diffuse Horizontal Irradiance (DHI) using the Weather Research and Forecasting model specifically designed for solar radiation applications (WRF-Solar) and seven microphysical schemes. Three stratocumulus (Sc) and five shallow cumulus (Cu) cases are simulated and evaluated against measurements at the US Department of Energy’s Atmospheric Radiation Measurement (ARM) user facility, Southern Great Plains (SGP) site. Results show that different microphysical schemes lead to spreads in simulated solar irradiance components up to 75% and 350% from their ensemble means in the Cu and Sc cases, respectively. The Cu cases have smaller microphysical sensitivity due to a limited cloud fraction and smaller domain-averaged cloud water mixing ratio compared to Sc cases. Cloud properties also influence the partition of GHI into DNI and DHI, and the model simulates better GHI than DNI and DHI due to a non-physical error compensation between DNI and DHI. The microphysical schemes that produce more accurate liquid water paths and effective radii of cloud droplets have a better overall performance.