Search NASA⌕ Search

SEARCH · Search NASA

Results for “Water management”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Rice husk and charred husk amendments increase porewater and plant Si but water management determines grain As and Cd concentration

Abstract Purpose Rice is a staple crop worldwide and a silicon (Si) hyperaccumulator with Si levels reaching 5–10% of its mass; this can result in desilication and Si-deficiency if plant residues are not managed correctly. Rice is also uniquely subject to arsenic (As) and cadmium (Cd) contamination depending on soil conditions. Our goal is to quantify the effects of rice husk (a Si-rich milling byproduct) amendments and different water management strategies on rice uptake of Si, As, and Cd. Methods We employed 4 husk amendment treatments: Control (no husk), Husk (untreated husk), Biochar (husk pyrolyzed at 450 °C), and CharSil (husk combusted at > 1000 °C). Each of these amendments was studied under nonflooded, alternate wetting and drying (AWD), and flooded water management in a pot study. Porewater chemistry and mature plant elemental composition were measured. Results Husk and Biochar treatments, along with flooding, increased porewater and plant Si. Vegetative tissue As decreased with increasing porewater Si, but grain As and plant Cd were primarily controlled by water management. Grain As and Cd were inversely correlated and are simultaneously minimized in a redox potential (Eh) range of 225–275 mV in the studied soil. Ferrihydrite in root iron plaque decreased As translocation from porewater to grain, but amendments were not able to increase plaque ferrihydrite content. Conclusion We conclude moderate husk amendment rates (i.e., 4 years’ worth) with minimal pretreatment strongly increases rice Si content but may not be sufficient to decrease grain As in low Si and As soil.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Hydrogen Iron Flow Battery with High Current Density and Long Cyclability Enabled Through Circular Water Management

The hydrogen‐iron (HyFe) flow cell has great potential for long‐duration energy storage by capitalizing on the advantages of both electrolyzers and flow batteries. However, its operation at high current density (high power) and over continuous cycling testing has yet to be demonstrated. In this article, we discuss our design and demonstration of a water‐management strategy that supports high current and long‐cycling performance of a HyFe flow cell. Water molecules associated with the movement of protons from the iron electrode to the hydrogen electrode are sufficient to hydrate the membrane and electrode at a low current density of 100 mA cm −2 during the charge process. At higher charge current density, more aggressive measures must be taken to counter back‐diffusion driven by the acid concentration gradient between the iron and hydrogen electrodes. Our water‐management approach is based on water vapor feeding in the hydrogen electrode and water evaporation in the iron electrode, thus enabling high current density operation of 300 mA cm −2 .

Yan, Litao↗
DOE OSTI2025

Evaluating an Earth system model from a water manager perspective

Abstract. The large spatial scale of global Earth system models (ESMs) is often cited as an obstacle to using the output by water resource managers in localized decisions. Recent advances in computing have improved the fidelity of hydrological responses in ESMs through increased connectivity between model components. However, the models are seldom evaluated for their ability to reproduce metrics that are important for and resonate with practitioners or that allow practitioners to situate higher-resolution model outputs within a cascade of uncertainty stemming from different models and scenarios. We draw on the combined experience of the author team and water manager workshop participants to identify salient water management metrics and evaluate whether they are credibly reproduced over the conterminous USA by the Community Earth System Model v2 (CESM2) Large Ensemble. We find that, while the exact values may not match the observations, aspects such as interannual variability can be reproduced by CESM2 for the mean wet day precipitation and length of dry spells. CESM2 also captures the proportion of total annual precipitation that derives from the heaviest rain days in watersheds that are not snow-dominated. Aggregating the 7 d mean daily runoff to two-digit Hydrological Unit Code (HUC2) watersheds also shows that rain-dominated regions capture the timing and interannual variability of annual maximum and minimum flows. We conclude that there is potential for far greater use of large-ensemble ESMs, such as CESM2, in long-range water management decisions to supplement high-resolution regional projections.

Tye, Mari R. (ORCID:0000000324911020)↗
DOE OSTI2021

OpenET: Filling a Critical Data Gap in Water Management for the Western United States

The lack of consistent, accurate information on evapotranspiration (ET) and consumptive use of water by irrigated agriculture is one of the most important data gaps for water managers in the western United States (U.S.) and other arid agricultural regions globally. The ability to easily access information on ET is central to improving water budgets across the West, advancing the use of data-driven irrigation management strategies, and expanding incentive-driven conservation programs. Recent advances in remote sensing of ET have led to the development of multiple approaches for field-scale ET mapping that have been used for local and regional water resource management applications by U.S. state and federal agencies. The OpenET project is a community-driven effort that is building upon these advances to develop an operational system for generating and distributing ET data at a field scale using an ensemble of six well-established satellite-based approaches for mapping ET. Key objectives of OpenET include: Increasing access to remotely sensed ET data through a web-based data explorer and data services; supporting the use of ET data for a range of water resource management applications; and development of use cases and training resources for agricultural producers and water resource managers. Here we describe the OpenET framework, including the models used in the ensemble, the satellite, meteorological, and ancillary data inputs to the system, and the OpenET data visualization and access tools. We also summarize an extensive intercomparison and accuracy assessment conducted using ground measurements of ET from 139 flux tower sites instrumented with open path eddy covariance systems. Results calculated for 24 cropland sites from Phase I of the intercomparison and accuracy assessment demonstrate strong agreement between the satellite-driven ET models and the flux tower ET data. For the six models that have been evaluated to date (ALEXI/DisALEXI, eeMETRIC, geeSEBAL, PT-JPL, SIMS, and SSEBop) and the ensemble mean, the weighted average mean absolute error (MAE) values across all sites range from 13.6 to 21.6 mm/month at a monthly timestep, and 0.74 to 1.07 mm/day at a daily timestep. At seasonal time scales, for all but one of the models the weighted mean total ET is within ±8% of both the ensemble mean and the weighted mean total ET calculated from the flux tower data. Overall, the ensemble mean performs as well as any individual model across nearly all accuracy statistics for croplands, though some individual models may perform better for specific sites and regions. We conclude with three brief use cases to illustrate current applications and benefits of increased access to ET data, and discuss key lessons learned from the development of OpenET.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Understanding water management in platinum group metal-free electrodes using neutron imaging

Platinum group metal-free (PGM-free) catalysts are a low-cost alternative to expensive PGM catalysts for polymer electrolyte fuel cells. However, due to the low volumetric activity of PGM-free catalysts, the catalyst layer thickness of the PGM-free catalyst electrode is an order of magnitude higher than PGM based electrodes. The thick PGM-free electrodes suffer from increased transport resistance and poor water management, which ultimately limits the fuel cell performance. This manuscript presents the study of water management in the PGM-free electrodes to understand the transport limitations and improve fuel cell performance. Here, in-operando neutron imaging is performed to estimate the water content in different components across the fuel cell thickness. Water saturation in thick PGM electrodes, with similar catalyst layer thickness to PGM-free electrodes, is lower than in the PGM-free electrodes irrespective of the operating conditions, due to high water retention by PGM-free catalysts. Improvements in fuel cell performance are accomplished by enhancing water removal from the flooded PGM-free electrode in three ways: (i) enhanced water removal with a novel microporous layer with hydrophilic pathways incorporated through hydrophilic additives, (ii) water removal through anode via novel GDL in the anode, and (iii) lower water saturation in PGM-free electrode structures with increased catalyst porosity.

25 ENERGY STORAGE↗
DOE OSTI2022

Understanding the E balance for water management in hydroxide exchange membrane fuel cells

As a key challenge for hydroxide exchange membrane fuel cells (HEMFCs), understanding water management deeply is critical for performance and durability improvement. Here, in this work, we show that the balance between water generation and phase-change-induced (PCI) flow is the main factor controlling cell voltage over a wide range of conditions where the cells are vulnerable to severe flooding. The regulation of flooding by heat generation can be reflected by a stable voltage with increase of current density in the polarization curve. This PCI balance voltage (E balance ), which determines the shape of polarization curve, is modeled as a function of cell operating conditions and gas diffusion layer (GDL) properties. Temperature, pressure, and thermal conductivity of GDL were found important for tuning the level of E balance , both in HEMFCs and proton exchange membrane fuel cells. The understanding of E balance will help to generate strategies for resolving flooding in HEMFCs, and it offers a new perspective for polarization curve interpretation.

25 ENERGY STORAGE↗
DOE OSTI2024

Assessing the complex influences of water management on hydrological drought characteristics in Texas

The state of Texas in the United States is highly susceptible to drought. Its major rivers are subject to extensive water management (WM) activities in order to sustain multisectoral water demands, particularly during drought conditions. However, the impact of WM on the propagation dynamics and characteristics of hydrological drought (HD) in Texas remains unclear. To fill this gap, this study quantifies the influence of WM across 32 streamflow gauges along the mainstems of seven major rivers in Texas by comparing a variety of drought metrics under natural and managed conditions. Notably, we leveraged an extensive, naturalized streamflow dataset constructed by the Texas Commission on Environmental Quality, paired with gauge observations of managed conditions. Results indicate that at the multi-decadal scale, WM significantly reduced HD frequency across all seven rivers and at 81% of the gauges analyzed. Additionally, it increased the response timescale of HD across Texas’ major rivers by a median of 2.5 months. Conversely, the average-event duration and severity increased in most locations. Temporal analysis reveals that the WM impact on HD varied seasonally, with attenuation effects during mid-summer and early fall and intensification effects during late winter and spring. Additionally, WM was found to greatly increase the spatial variability of HD characteristics across the region. These findings emphasize the complexity of WM effects on HD and the necessity for nuanced strategies in managing HD under WM influences.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Field-scale mapping of California crop water productivity to inform water management in critically overdrafted groundwater basins

Crop water productivity (CWP) metrics can reveal how the dynamics of crop production and water use change across space and time. We use field-scale satellite inputs from 2016–2021 to estimate potential water savings for four crops (almonds, grapes, walnuts, and citrus—which collectively account for approximately one-third of California’s cropland area), within critically overdrafted groundwater sub-basins of California’s San Joaquin Valley. These annual estimates of field-level water savings potential are based on locally achievable CWP values for each crop type. Our findings show considerable spatial variation in CWP and potential water savings within each sub-basin. We find that increasing CWP to peak efficiency (defined as improving fields to the 95th percentile of observed CWP) for four crops could meet up to 36% of the estimated annual overdraft in San Joaquin Valley. For comparison, fallowing 5% of the four crop type fields in the same study area could potentially reduce annual overdraft by 11%. By delivering results at the field scale, our work can inform targeted interventions by irrigation district managers and more efficient allocation of state incentives for improved water management. For example, we estimate that state grant funding for water efficiency upgrades could have amplified potential water savings threefold by targeting investments to the least efficient fields.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Machine Learning Assisted Reservoir Operation Model for Long–Term Water Management Simulation

This study explores strategies for long-term reservoir simulations by combining generic rule-based reservoir management model (RMM) and machine learning (ML) models for two major multipurpose reservoirs — Allatoona Lake and Lake Sidney Lanier in the southeastern United States. First, a standalone RMM is developed to simulate daily release and storage during Water Year 1981–2015. Next, using Long-Short Term Memory (LSTM) as the ML technique, a standalone LSTM model is trained based on reservoir inflow and meteorological observations to simulate reservoir release and estimate reservoir storage through water balance calculation. Three hybrid modeling strategies are developed, one using RMM output as an additional LSTM input (H1), another using LSTM as the initial release estimate in RMM (H2), and the third combining the first two strategies (H3). The Nash–Sutcliffe efficiency (NSE) for release (NSE-r), storage (NSE-s), and their mean (NSE-avg) are used for model evaluation. Overall, H1 improves NSE-r to 0.65 and 0.54 for Allatoona and Lanier, respectively, compared to standalone RMM (0.44 and 0.21); however, its storage trajectory did not produce a physically feasible solution, similar to LSTM. H2 and especially H3 show that they can retain the best features from RMM and LSTM, with H3 NSE-avg being 0.695 and 0.55 for Allatoona and Lanier outperforming RMM (0.615 and 0.29). In conclusion, the findings suggest a robust simulation capacity for large-scale water management in future studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

New opportunities in produced water management: A market-based approach to produced water trading

Produced water (PW) is a byproduct of oil and gas (O&G) production. Obtained alongside the more valuable energy products, PW is usually characterized by high levels of salinity and often contains many contaminants (chemicals, soluble and insoluble oil, organics, etc.) making it unsuitable for release without substantial treatment. Couple this with the fact that PW is typically obtained at multiple times the rate of oil or gas, and the added transport, treatment, and disposal costs become a serious challenge for operators. These realities have led to ad-hoc practices including cooperation between industry competitors to recycle, share, or otherwise mitigate PW costs. The National Energy Technology Laboratory (NETL) in partnership with the Ground Water Protection Council (GWPC) is pursuing novel technology solutions to address PW issues that complement or improve ad-hoc practices adopted by operators. In this paper, we observe that well-established market management practices used in electrical power generation have natural analogues in the PW supply chain. These parallels open up a new line of research where we view PW management as a market equilibrium problem, and explore solutions that foster active and data-based collaboration among operators through market structures similar to power markets, with the ultimate objective of improving PW management costs and recycling rates. Here, we make a case for our observations, present a PW market clearing optimization model that shows how such a market system could operate in the O&G space, and provide an illustrative case study for demonstration.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

HarDWR - Water Management Area (WMA) Shapefiles

For a detailed description of the database of which this record is only one part, please see the HarDWR meta-record. Borders of all Water Management Areas (WMAs) across the 11 Western-most states of the continental United States are available filtered through a single source. The legal name for this set of boundaries varies state-by-state. The data is provided as two compressed shapefiles. One, stateWMAs, contains data for all 11 states. For 10 of those states, Arizona being the exception, the polygons represent the legal management boundaries used by those states to manage their surface and groundwater resources respectively. Arizona is unique among this collection of states in that surface and groundwater resources are managed using two separate sets of boundaries. During our followup analysis, due to technical reasons we decided to focus on one set of boundaries, those for surface water. Due to this, the Arizona surface WMAs are included within stateWMAs. The Arizona groundwater WMAs are provided as the second file azGroundWMAs as a companion to the first file for completeness and general reference, although the boundaries were no longer referenced in the analysis (Grogan et al., in review) past a certain point. The columns for both shapefiles are: basinNum: the state provided unique numerical ID basinName: the state provided English name of the area, where applicable state: the state name uniID: a unique identifier we created by concatenating the state name, and underscore, and the state numerical ID

Economics↗
DOE OSTI2022

Water Management for Power stems: Systems Analysis Tasks

This presentation was given at the 2023 U.S. Department of Energy National Energy Technology Laboratory Resource Sustainability Project Review Meeting. The presentation topics cover recent updates and current research directions for the Strategic Systems Analysis and Engineering Directorate in Water Management for Power Systems. The presentation includes preliminary results to meet objectives in reducing freshwater consumption and lowering the cost of treating effluent streams for energy production.

Fritz, Alison↗
DOE OSTI2022

Reversible Fuel Cell Stacks with Integrated Water Management

Regenerative fuel cell/electrolyzers have long held promise as energy storage devices. Due to their small footprint and their ability to separately size the power and storage functions, they have many advantages over batteries, particularly for remote or deployable systems. A unitized regenerative fuel cell is proposed that takes advantage of three new technologies. The first is a H 2 /O 2 unitized regenerative stack that Giner, Inc. (Giner) has developed that combines a fuel cell and electrolyzer stack, eliminating one of the electrochemical stacks, the most expensive component in regenerative fuel cell systems. The second is an oxygen catalyst with low PGM loadings generated through Reactive Spray Deposition Technology (RSDT). The third is an amphiphilic microporous layer (AMPL) structure to greatly aid water management in both operational modes.

08 HYDROGEN↗
DOE OSTI2021

Energy Efficient Waste Heat Coupled Forward Osmosis for Effluent Water Management at Coal-Fired Power Plants

This project sought to evaluate the technical and economic viability of the Aquapod©, a transformational low energy (<200 kJ/kg water) waste heat coupled forward osmosis (FO) technology, to manage effluents, meet cooling water demands, and achieve water conservation in a coal-fired power plant environment. The Aquapod© process is innovative because it is heat-driven, avoids the evaporation of water, and uses no toxic chemicals such as ammonia or amines. The Aquapod© process accomplishes this using an aqueous two-phase system (ATPS) coupled FO process. The evaluation revealed that the Aquapod© process offers a pathway to exploit waste heat resources within a power plant to achieve flue-gas desulfurization (FGD) wastewater volume reduction and water recovery with minimal pretreatment. Water recovery of 80% from FGD wastewater was achieved with minimal pretreatment, exceeding the project target of 50%. The estimated electrical energy of 2.16 kWh/m 3 of water produced for the Aquapod© process met the project target of < 3.6 kWh/m 3 . The heat required for the process operation was approximately 186 kJ/kg of produced water, which was slightly lower than the project target of 200 kJ/kg. The estimated treatment cost for installing and operating the Aquapod© process in conjunction with a spray dryer evaporator to achieve zero-liquid discharge (ZLD) of the 100 gpm FGD wastewater was $13.24/m 3 over a 30-year lifetime. As a point of reference, this study’s host power plant currently incurs a cost of $3.70/m 3 – $8.87/m3 on a discharged volume basis to discharge its wastewater into the publicly owned treatment works (POTW) after physical-chemical treatment. Therefore, the Illinois power plant would incur an incremental cost increase of $4.37/m 3 – 9.54/m 3 to achieve ZLD using the Aquapod© and spray dryer combination. Ample opportunities exist to further lower the ZLD capital and operating costs in the next design iteration to attain pipe parity at the higher end of the site treatment costs.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Detecting flash drought events to inform adaptive water management

Abstract: Flash droughts are characterized by a rapid onset of drought conditions, a common feature among various indicators of these events. The lack of a standardized definition and indicator makes flash droughts particularly challenging to predict and manage. We test six state-of-the-art flash drought indicators using 41 years of daily data across all Hydrological Unit Code 4 (HUC4) regions in the contiguous United States. Our results show substantial disagreements among indicators, suggesting that the detection of a flash drought event strongly depends on the choice of indicator. From the perspective of informing management and operations, an open challenge remains: which flash drought indicator should be used to trigger operational adaptations? To this end, we propose a methodological framework that informs adaptive actions by regionally assessing the level of agreement between different indicators. The regional differences in hydroclimatic conditions are expected to be reflected in the level of agreement between indicators. To better inform adaptive actions, the framework will also consider the impacted sectoral water uses and their varying response times. The insights gained from this study improve the understanding of how these different flash drought indicators capture the different aspects of regional differences and impacted sectors. Furthermore, this information can support more targeted adaptive actions to mitigate adverse impacts through improved preparedness and response strategies.

climate resilience↗