Search NASA⌕ Search

SEARCH · Search NASA

Results for “Water oxidation catalyst, homogeneous catalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

27 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Enabling Solar Water Oxidation by BiVO 4 in Strongly Acidic Solutions

The oxygen evolution reaction (OER) is paired with various electrochemical and photoelectrochemical reduction reactions used for fuel and chemical production. As there is a strong interest in performing many of these reduction reactions in strongly acidic solutions to increase the reaction rate, efficiency, or selectivity, there is also a great interest in enabling efficient and stable OER in strongly acidic solutions. In this study, we report stable photoelectrochemical OER (POER) of a BiVO 4 photoanode in 0.1 M HNO 3 (pH 1). This was achieved by using Nb 2 O 5 as a protection layer. While Nb 2 O 5 was rarely used as a protection layer for photoelectrodes in the past, we show its excellent capability to suppress both the chemical and photoelectrochemical dissolution of BiVO 4 at pH 1. After stabilizing BiVO 4 with a Nb 2 O 5 protection layer, we added Co 2+ ions to the electrolyte as an OER catalyst to enhance the POER. We found that Co (aq) 2+ can serve as a homogeneous OER catalyst without being deposited as a CoO x solid catalyst on Nb 2 O 5 . When we performed the POER using unprotected BiVO 4 with Co (aq) 2+ under the same condition, although POER was enhanced, the enhancement could not be sustained due to the chemical dissolution of BiVO 4 . After the POER, we found that a Co 3+ -containing OER catalyst was deposited on the bare BiVO 4 surface. This result suggested that the use of Co 2+ ions as a homogeneous catalyst was possible due to the inertness of the Nb 2 O 5 surface toward the adsorption or deposition of Co ions. This study enabling stable POER of BiVO 4 in 0.1 M HNO 3 using the combination of a Nb 2 O 5 protection layer and Co (aq) 2+ as a homogeneous OER catalyst provides promising possibilities for acidic POER and OER.

Catalysts↗
DOE OSTI2026

From Powder to Power: Tailored Pre-Milling Strategy that Optimizes Microstructure for Efficient Hydrogen Evolution

The hydrogen evolution reaction (HER) plays a critical role in enabling large-scale electrolytic hydrogen production and advancing future technologies and fuel production. Among non-precious metals, NiMo-based catalysts are particularly attractive due to their capability to promote both water dissociation and hydrogen adsorption in alkaline media. However, conventional NiMo catalysts often suffer from incomplete alloying, particle aggregation, weak metal–support interactions, and surface oxidation, which significantly limit active site utilization, electronic conductivity, and long-term stability. Herein, we report a scalable, solid-state, two-step ball milling strategy for constructing an efficient NiMo/C catalyst for the HER. Pre-milling the metal precursors prior to carbon incorporation promotes efficient solid-state activation, leading to the formation of uniformly alloyed, ultrafine, and defect-rich Ni–Mo nanoparticles with robust metal–carbon interfacial anchoring. Benefiting from this integrated structural design, the optimized NiMo/C catalyst exhibits low overpotentials and Tafel slopes, reduced charge-transfer resistance, and excellent durability under alkaline conditions. Comprehensive structural and surface analysis reveal that the enhanced HER performance can be attributed to the synergistic interplay of homogeneous Ni–Mo alloying, uniform nanoparticle dispersion on a defect-rich carbon scaffold, enhanced accessibility of catalytically active sites, and optimized electronic coupling that stabilizes the catalyst surface. This work highlights the two-step solid-state ball milling strategy as a simple, robust, and scalable route for the preparation of effective and durable non-precious metal HER electrocatalysts, offering practical insights toward large-scale and inexpensive hydrogen production.

Yang, Xiaoxuan [Oak Ridge National Laboratory (ORN↗
DOE OSTI2020

Novel Homogeneous Electrocatalysts for the Nitrogen Reduction Reaction

This project funded a broad range of fundamental studies in the research labs of Prof. John Berry at the University of Wisconsin – Madison. The overall goals of this research are to identify and explore promising new fundamental chemistry of metal-metal bonded coordination compounds in catalysis, with a particular focus on exploring the technologies needed for the transition to a nitrogen economy. We focus on two key technologies for this overall goal: Electrochemical synthesis of ammonia from nitrogen and water, and Electrochemical ammonia oxidation to produce nitrogen. Ammonia is the most hydrogen-rich material known aside from hydrogen itself, and is therefore an ideal fuel unit. Currently, ammonia synthesis uses significant fossil fuel inputs, has a large carbon footprint, and is performed in large, centralized facilities, mandating the exploration of carbon-neutral approaches that can be done in a distributable manner so that ammonia transportation does not pose a bottleneck. Our work towards these goals is organized as follows: Goal 1: Synthesis and characterization of new catalysts and N2RR intermediates; Goal 2: Thermodynamic investigations of all catalysts and intermediates; Goal 3: Exploration of the electrocatalytic N¬2RR using new catalysts. We additionally made progress toward a related Goal 4: Exploration of new types of catalysts with other, cheaper transition metals. We had a major setback in year 1 of the grant due to the student driving this project (Tristan Brown) contracting an incurable disease that made it impossible for him to perform lab work. Tristan transitioned to a computational chemistry project and was subsequently able to complete his PhD.

02 PETROLEUM↗
DOE OSTI2021

Organometallic complexes as preferred precursors to form molecular Ir(pyalk) coordination complexes for catalysis of oxygen evolution

Our previously reported ‘blue solution’ oxygen-evolution catalyst consists of an isomeric mixture of coordination complexes containing the (pyalk)Ir IV –O–Ir IV (pyalk) core unit and is thus entirely molecular but only when formed from organometallic precursors such as Cp*Ir(pyalk)Cl or Ir(pyalk)(CO) 2 (pyalk = (2-pyridyl)-2-propanolate). We now show that attempts to form it from such obvious coordination precursors as Na[Ir(pyalk)Cl 4 ] or Na[IrCl 2 (pyalk)(O 2 CPh) 2 ], under a variety of conditions, always fail in our hands, leading to a mixture of molecular ‘blue solution’ species and IrO x nanoparticles, rather than the purely homogeneous catalyst formed from organometallic precursors. The loss of the pyalk ligand during the oxidative activation is associated with the nanoparticle generation. External chelating ligands also failed to stop the nanoparticle formation. This work implies the paradoxical conclusion that organometallic complexes are effective as catalyst precursors, even when coordination complexes are the catalytically active species, since the inner-sphere organometallic ligands, although ultimately lost or degraded, may nevertheless have a stabilizing effect sufficient to suppress undesirable nanoparticle production pathways in the activation of the catalyst precursor. Finally, a key aspect of the present study is that organometallic complexes in general may be useful catalyst precursors even if the organometallic ligands are lost in the activation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhanced Activity in Layered Metal-Oxide-Based Oxygen Evolution Catalysts by Layer-by-Layer Modulation of Metal-Ion Identity

Few-layered potassium nickel and cobalt oxides show drastic differences in catalytic activity based on metal ion preorganization. Uniform compositions [(CoO 2 /K) 6 or (NiO 2 /K) 6 ] show limited activity, while homogeneously mixed-metal cobalt/nickel oxides [(Co n Ni (1–n) O 2 /K) 6 ] display moderate improvement. However, a layer-by-layer arrangement of alternating cobalt and nickel oxide sheets [e.g., (CoO 2 /K/NiO 2 /K)] provides superior catalytic performance, reducing the oxygen evolution overpotential by ∼200–400 mV. Density functional theory simulations provide an illustration of the electronic properties (density of states and localization of orbitals) that promote catalysis in the layer-segregated materials over those of homogeneous composition. This study reveals that atomic preorganization of metal ions within layered catalysts plays a more crucial role than the overall metal composition in enhancing catalytic efficiency for oxygen evolution.

catalysts↗
DOE OSTI2023

Earth Abundant Oxidation Catalysts for Removal of Contaminants of Emerging Concern from Wastewater: Homogeneous Catalytic Screening of Monomeric Complexes

Twenty novel Mn, Fe, and Cu complexes of ethylene cross-bridged tetraazamacrocycles with potentially copolymerizable allyl and benzyl pendant arms were synthesized and characterized. Multiple X-ray crystal structures demonstrate the cis-folded pseudo-octahedral geometry forced by the rigidifying ethylene cross-bridge and show that two cis coordination cites are available for interaction with substrate and oxidant. The Cu complexes were used to determine kinetic stability under harsh acidic and high-temperature conditions, which revealed that the cyclam-based ligands provide superior stabilization with half-lives of many minutes or even hours in 5 M HCl at 50–90 °C. Cyclic voltammetry studies of the Fe and Mn complexes reveal reversible redox processes indicating stabilization of Fe 2+ /Fe 3+ and Mn 2+ /Mn 3+ /Mn 4+ oxidation states, indicating the likelihood of catalytic oxidation for these complexes. Finally, dye-bleaching experiments with methylene blue, methyl orange, and rhodamine B demonstrate efficient catalytic decolorization and allow selection of the most successful monomeric catalysts for copolymerization to produce future heterogeneous water purification materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

Catalytic Combustion of Propane/Air Mixtures on Platinum

A honeycomb catalyst of platinum (4.2 kg/cu m loading) over cordierite, with gamma-alumina washcoat, a cross section of 2.4 x 2.4 sq cm, a length of 7.6 cm, and a characteristic channel diameter of 1.4 mm is used as a steady flow reactor. Measurements are made with C3H8/air mixtures at 650 to 800 K inlet temperatures, 110 KPa pressure, 10 to 40 m/s inlet velocity, 0.19 to 0.32 equivalence ratios, and approximately 1.5 mole percent water content. The measured quantities are the substrate tempeature at ten axial locations, the exhaust gas temperature, the exhaust concentrations of CO, CO2, O2, and total hydrocarbons, and the pressure drop across the monolith. The measured quantities are compared with those computed with a two-dimensional steady-state model for axial and radial convection and diffusion of mass, momentum, energy and homogeneous (three overall reactions) and heterogeneous (infinitely fast) reactions. It is found that, under the tested conditions, most of the fuel is converted to CO2 and H2O at the surface. Gas-phase reactions tend rapidly to become more important as the temperature and equivalence ratio are increased and the flow velocity is decreased. Surface fuel conversion is much more rapid than fuel diffusion, resulting in diffusion-controlled oxidation.

Bruno, C.↗
DOE OSTI2020

Metal–Ligand Cooperativity via Exchange Coupling Promotes Iron- Catalyzed Electrochemical CO 2 Reduction at Low Overpotentials

Biological and heterogeneous catalysts for the electrochemical CO 2 reduction reaction (CO 2 RR) often exhibit a high degree of electronic delocalization that serves to minimize overpotential and maximize selectivity over the hydrogen evolution reaction (HER). Here, we report a molecular iron(II) system that captures this design concept in a homogeneous setting through the use of a redox non-innocent terpyridine-based pentapyridine ligand (tpyPY2Me). As a result of strong metal-ligand exchange coupling between the Fe(II) center and ligand, [Fe(tpyPY2Me)] 2+ exhibits redox behavior at potentials 640 mV more positive than the isostructural [Zn(tpyPY2Me)] 2+ analog containing the redox-inactive Zn(II) ion. This shift in redox potential is attributed to the requirement for both an open-shell metal ion and a redox non-innocent ligand. The metal-ligand cooperativity in [Fe(tpyPY2Me)] 2+ drives the electrochemical reduction of CO 2 to CO at low overpotentials with high selectivity for CO 2 RR (>90%) and turnover frequencies of 100,000 s -1 with no degradation over 20 h. The decrease in the thermodynamic barrier engendered by this coupling also enables homogeneous CO 2 reduction catalysis in water without compromising selectivity or rates. Synthesis of the two-electron reduction product, [Fe(tpyPY2Me)] o , and characterization by X-ray crystallography, Mössbauer spectroscopy, X-ray absorption spectroscopy (XAS), variable temperature NMR, and density functional theory (DFT) calculations, support assignment of an open-shell singlet electronic structure that maintains a formal Fe(II) oxidation state with a doubly reduced ligand system. Furthermore, this work provides a starting point for the design of systems that exploit metal-ligand cooperativity for electrocatalysis where the electrochemical potential of redox non-innocent ligands can be tuned through secondary metal-dependent interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Carbonate Management to Enable Energy- and Carbon-Efficient CO 2 Electrolysis (Final Technical Report)

The rapid growth and plummeting cost of solar energy have spurred growing interest in using CO 2 electrolysis to produce chemicals and fuels as an alternative to conventional petrochemical processes. High-temperature (>800 °C) solid oxide electrolyzers that convert CO 2 into CO and O 2 have recently become commercially available. Low-temperature electrolysis cells offer the prospect of more convenient and flexible operation, which is critical for utilizing intermittent solar energy, and provide access to more valuable C 2+ products such as ethylene, ethanol, and propanol. Over the past 10 years, research in this area has yielded substantial progress in both fundamental understanding of the requisite electrocatalytic reactions and design of prototype devices. Leveraging insights from fuel cells and membrane water electrolyzers, researchers have developed electrolysis cells with gas diffusion electrodes (GDE) that have demonstrated high CO 2 electrolysis current densities (>100 mA cm –2 ) as well as promising selectivity and stability. Despite these advances, the energy efficiency (electrical energy-to-product) and carbon efficiency (CO 2 -to-product) of low-temperature CO 2 electrolysis remain far too low for large-scale deployment. A preponderance of evidence indicates that the principal source of efficiency losses is the rapid and thermodynamically favorable reaction of CO 2 with hydroxide (OH – ) to form carbonate (CO 3 2– ). Carbonate formation imposes steady-state electrolysis conditions that result in large voltage and CO 2 losses for all known (photo)electrochemical CO 2 cells. While much current research remains focused on CO 2 reduction catalyst design, this largely overlooked CO 3 2– problem presents a fundamental scientific barrier to creating a viable electrochemical option for converting solar energy into chemicals and fuels. The project pursues an integrated, multi-PI research effort that establishes a fundamental science of CO 3 2– management. PI Kanan and Co-PI Mani’s contribution to the project is to evaluate strategies to mitigate the CO 3 2– problem by changing the properties of the electrolyte and the environment in which CO 2 reduction catalysis takes place. Experimental studies showed that electrolytes composed of a high concentration of both CO 3 2– and HCO 3 – , which serve as moderately alkaline buffers, improved the cell voltage by compared to all-HCO 3 – electrolytes, but these buffered systems still show substantial CO 2 uptake that reduces pH over time. Computational studies developed a homogenized model of a CO 2 reduction catalyst layer that permits a low-cost exploration of the high-dimensional parameter space associated with catalyst layers on gas diffusion electrodes. The model was validated by accurately reproducing experimental data for the related but simpler reaction of CO reduction and then used to probe the effects of catalyst layer architecture on CO 2 reduction. Minimizing the size of catalyst and hydrophobic domains in the catalyst layer is predicted to mitigate CO 3 2– formation and thereby enable prolonged operation at elevated pH. In support of the CO 2 electrolysis studies, a new method for rapidly prototyping electrochemical cells was developed and validated. The method uses a combination of 3D printing and electroless plating to generate conductive cell components for evaluating new cell designs. The carbonate problem encompasses mass transport processes and acid-base reactions that are relevant to many other electrochemical systems. Investigation of strategies to address the carbonate problem led to an additional line of inquiry into the physicochemical phenomena that determine the efficiency of electrochemical acid-base production, which has numerous applications in the broader field of carbon management. New strategies for using the supporting electrolyte to inhibit H + /OH – recombination in electrochemical acid-base production were evaluated, leading to the development of a novel acid-base producing system that eliminates the need for ion exchange membranes and exhibits promising efficiency and current densities for scalable applications.

25 ENERGY STORAGE↗