Search NASA⌕ Search

SEARCH · Search NASA

Results for “Wind Forecast Improvement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Two-Step Forecast of Geomagnetic Storm Using Coronal Mass Ejection and Solar Wind Condition

To forecast geomagnetic storms, we had examined initially observed parameters of coronal mass ejections (CMEs) and introduced an empirical storm forecast model in a previous study. Now we suggest a two-step forecast considering not only CME parameters observed in the solar vicinity but also solar wind conditions near Earth to improve the forecast capability. We consider the empirical solar wind criteria derived in this study (Bz ≤ −5 nT or Ey ≥ 3 mV/m for t ≥ 2 h for moderate storms with minimum Dst less than −50 nT) (i.e. Magnetic Field Magnitude, B (sub z) less than or equal to -5 nanoTeslas or duskward Electrical Field, E (sub y) greater than or equal to 3 millivolts per meter for time greater than or equal to 2 hours for moderate storms with Minimum Disturbance Storm Time, Dst less than -50 nanoTeslas) and a Dst model developed by Temerin and Li (2002, 2006) (TL [i.e. Temerin Li] model). Using 55 CME-Dst pairs during 1997 to 2003, our solar wind criteria produce slightly better forecasts for 31 storm events (90 percent) than the forecasts based on the TL model (87 percent). However, the latter produces better forecasts for 24 nonstorm events (88 percent), while the former correctly forecasts only 71 percent of them. We then performed the two-step forecast. The results are as follows: (i) for 15 events that are incorrectly forecasted using CME parameters, 12 cases (80 percent) can be properly predicted based on solar wind conditions; (ii) if we forecast a storm when both CME and solar wind conditions are satisfied (∩, i.e. cap operator - the intersection set that is comprised of all the elements that are common to both), the critical success index becomes higher than that from the forecast using CME parameters alone, however, only 25 storm events (81 percent) are correctly forecasted; and (iii) if we forecast a storm when either set of these conditions is satisfied (∪, i.e. cup operator - the union set that is comprised of all the elements of either or both), all geomagnetic storms are correctly forecasted.

geomagnetic storm forecast↗

Global Assimilation of Loon Stratospheric Balloon Observations

Project Loon has an overall goal of providing worldwide internet coverage using a network of long-durationsuper-pressure balloons. Since 2013, Loon has launched over 1600 balloons from multiple tropical and middlelatitude locations. These GPS tracked balloon trajectories provide lower stratospheric wind information overthe oceans and remote land areas where traditional radiosonde soundings are sparse, thus providing uniquecoverage of lower stratospheric winds. To fully investigate these Loon winds we: 1) compare the Loon windsto winds produced by a global data assimilation system (DAS: NASA GEOS) and 2) assimilate the Loon windsinto the same comprehensive DAS. Results show that in middle latitudes the Loon winds and DAS winds agreewell, and the Loon wind assimilation has only a minor impact on the forecasts. However, in the Tropics, thereis often a substantial difference between the assimilated winds and the observed Loon winds, of 8 m/s or morein magnitude. In these cases, assimilating the Loon winds significantly improves the meteorological analysesand subsequently the forecasts of the Loon winds. By highlighting cases where the Loon and DAS winds differ,these results can lead to improved understanding of stratospheric winds, especially in the tropics, as well asaiding analyses of the representation of dynamical forcing mechanisms in the GEOS model.

Coy, Lawrence↗

Follow-on Missions to SPARCLE

Global tropospheric wind observations are considered the number one unaccommodated atmospheric observation for the new series of NPOESS (National Polar Orbiting Environmental Satellite Series) platforms. The operational meteorology communities have long recognized the potential for improved forecasting skill if accurate wind observations were available around the globe. Recent analyses suggest that wind observations such as those that could be made by a space-based Doppler wind lidars; would even result in greater improvements than better temperature soundings. In this paper we present a roadmap that begins with the NASA approved SPAce Readiness Coherent Lidar Experiment (SPARCLE) and ends with an operational DWL (Doppler Wind Lidar) on an NPOESS platform.

Emmitt, G. D.↗

A GEOS-Based OSSE for the "MISTiC Winds" Concept

The Goddard Earth Observing System (GEOS) atmospheric model and data assimilation system are used to perform an Observing System Simulation Experiment (OSSE) for the proposed MISTiC Wind mission. The GEOS OSSE includes a reference simulation (the Nature Run), from which the pseudo-observations are generated. These pseuo-observations span the entire suite of in-situ and space space-based observations presently used in operational weather prediction, with the addition of the MISTiC-Wind dataset. New observation operators have been constructed for the MISTiC Wind data, including both the radiances measured in the 4-micron part of the solar spectrum and the winds derived from these radiances. The OSSE examines the impacts on global forecast skill of adding these observations to the current operational suite, showing substantial improvements in forecasts when the wind information are added. It is shown that a constellation of four MISTiC Wind satellites provides more benefit than a single platform, largely because of the increased accuracy of the feature-derived wind measurements when more platforms are used.

McCarty, W.↗

Impact of Lidar Wind Sounding on Mesoscale Forecast

An Observing System Simulation Experiment (OSSE) was conducted to study the impact of airborne lidar wind sounding on mesoscale weather forecast. A wind retrieval scheme, which interpolates wind data from a grid data system, simulates the retrieval of wind profile from a satellite lidar system. A mesoscale forecast system based on the PSU/NCAR MM5 model is developed and incorporated the assimilation of the retrieved line-of-sight wind. To avoid the "identical twin" problem, the NCEP reanalysis data is used as our reference "nature" atmosphere. The simulated space-based lidar wind observations were retrieved by interpolating the NCEP values to the observation locations. A modified dataset obtained by smoothing the NCEP dataset was used as the initial state whose forecast was sought to be improved by assimilating the retrieved lidar observations. Forecasts using wind profiles with various lidar instrument parameters has been conducted. The results show that to significantly improve the mesoscale forecast the satellite should fly near the storm center with large scanning radius. Increasing lidar firing rate also improves the forecast. Cloud cover and lack of aerosol degrade the quality of the lidar wind data and, subsequently, the forecast.

Miller, Timothy L.↗

Global Assimilation of Loon Stratospheric Balloon Observations

Accurate analyses of stratospheric winds are important for determining realistic constituent transport and providing improved diagnostic studies and forecasts of the stratosphere. This study examines impacts on global meteorological analyses resulting from using winds derived from Loon superpressure balloons in the lower stratosphere (hereafter Loon winds) as additional input observations to the Goddard Earth Observing System (GEOS) data assimilation system. To fully investigate the impacts of assimilating the Loon winds, two steps are taken: (1) comparison of the GEOS analysis winds with Loon winds (Control experiment) and (2) examination of the impacts of assimilating the Loon winds into the GEOS data assimilation system (Loon experiment). The time period selected is June–August 2014 when over 150 Loon balloons were launched, mainly in the Southern Hemisphere. In the middle latitudes, the Loon winds and Control winds agree well (Loon balloon zonal wind observation minus forecast, O − F, root‐mean‐square (RMS) values of ~2.75 m/s) and assimilating the Loon winds has a small impact (O − F RMS values unchanged). In the tropics, the Loon observations and Control analysis winds differ more than in middle latitudes (zonal wind O − F RMS ~3.75 m/s) and assimilating the Loon winds improves the zonal wind O − F RMS by ~1 m/s. In selected cases where the Loon observations and Control analysis differ greatly (O − F RMS values greater than 10 m/s), assimilating Loon winds significantly decreases the zonal wind O − F RMS by 5 m/s. These decreases in O − F RMS values show that the 6‐hr forecasts are improved at the Loon balloon observation locations. While satellites routinely measure Earth's global temperatures from space, in situ wind measurements are relatively scarce, consisting mainly of a network of ground‐based weather balloons. Since only a limited number of the weather balloons even reach stratospheric altitudes, there is a need for additional stratospheric observations. One option for addition wind information is the use of experimental superpressure balloons (SPBs). SPBs can remain in the stratosphere for many months traveling with the winds and hence, by reporting their changing positions, providing in situ wind observations. These SPBs experiments are generally limited in terms of time period and number of balloons. However, over the past few years Loon has been launching hundreds of SPBs (hereafter called Loon balloons) providing a more consistent set of observations of wind in the stratosphere. Here we assimilate some of the Loon balloon winds into the NASA GEOS global data assimilation system. The data assimilation system combines all observations with an atmospheric model to produce global analysis of winds and temperatures. Results show that including the Loon balloon wind information noticeably affects the global analysis as well as forecasts with the largest impact in the tropics. These results provide direction to future model and analysis improvements.

L. Coy↗

Aviation Weather Program (AWP)

The Aviation Weather Program (AWP) combines additional weather observations, improved forecast technology, and more efficient distribution of information to pilots, controllers, and automated systems to improve the weather information provided to the air traffic control system, pilots, and other users of aviation weather information. Specific objectives include the needs to: improve airport and en-route capacity by accurate, high resolution, timely forecasts of changing weather conditions affecting airport and en-route operations; improve analyses and forecasts of upper-level winds for efficient flight planning and traffic management; and increase flight safety through improved aviation weather hazard forecasting (e.g. icing, turbulence, severe storms, microbursts, or strong winds). The AWP would benefit from participation in a cooperative multiscale experiment by obtaining data for: evaluation of aviation weather forecast products, analysis of four dimensional data assimilation schemes, and experimental techniques for retrieving aerosol and other visibility parameters. A multiscale experiment would also be helpful to AWP by making it possible to evaluate the added benefit of enhanced data sets collected during the experiment on those forecast and analysis products. The goals of the Coperative Multiscale Experiment (CME) are an essential step in attaining the long-term AWP objective of providing two-to-four hour location-specific forecasts of significant weather. Although the possibility of a funding role for the AWP in the CME is presently unclear, modest involvement of Federal Aviation Administration (FAA)/AWP personnel could be expected.

Foote, Brant↗

Determining the Probability of Violating Upper-Level Wind Constraints for the Launch of Minuteman Ill Ballistic Missiles At Vandenberg Air Force Base

The 30th Operational Support Squadron Weather Flight (30 OSSWF) provides comprehensive weather services to the space program at Vandenberg Air Force Base (VAFB) in California. One of their responsibilities is to monitor upper-level winds to ensure safe launch operations of the Minuteman Ill ballistic missile. The 30 OSSWF requested the Applied Meteorology Unit (AMU) analyze VAFB sounding data to determine the probability of violating (PoV) upper-level thresholds for wind speed and shear constraints specific to this launch vehicle, and to develop a graphical user interface (GUI) that will calculate the PoV of each constraint on the day of launch. The AMU suggested also including forecast sounding data from the Rapid Refresh (RAP) model. This would provide further insight for the launch weather officers (LWOs) when determining if a wind constraint violation will occur over the next few hours, and help to improve the overall upper winds forecast on launch day.

Shafer, Jaclyn A.↗

Determining the Probability of Violating Upper-Level Wind Constraints for the Launch of Minuteman III Ballistic Missiles at Vandenberg Air Force Base

The 30th Operational Support Squadron Weather Flight (30 OSSWF) provides comprehensive weather services to the space program at Vandenberg Air Force Base (VAFB) in California. One of their responsibilities is to monitor upper-level winds to ensure safe launch operations of the Minuteman Ill ballistic missile. The 30 OSSWF tasked the Applied Meteorology Unit (AMU) to analyze VAFB sounding data with the goal of determining the probability of violating (PoV) their upper-level thresholds for wind speed and shear constraints specific to this launch vehicle, and to develop a tool that will calculate the PoV of each constraint on the day of launch. In order to calculate the probability of exceeding each constraint, the AMU collected and analyzed historical data from VAFB. The historical sounding data were retrieved from the National Oceanic and Atmospheric Administration Earth System Research Laboratory archive for the years 1994-2011 and then stratified into four sub-seasons: January-March, April-June, July-September, and October-December. The AMU determined the theoretical distributions that best fit the maximum wind speed and maximum wind shear datasets and applied this information when calculating the averages and standard deviations needed for the historical and real-time PoV calculations. In addition, the AMU included forecast sounding data from the Rapid Refresh model. This information provides further insight for the launch weather officers (LWOs) when determining if a wind constraint violation will occur over the next few hours on the day of launch. The AMU developed an interactive graphical user interface (GUI) in Microsoft Excel using Visual Basic for Applications. The GUI displays the critical sounding data easily and quickly for LWOs on day of launch. This tool will replace the existing one used by the 30 OSSWF, assist the LWOs in determining the probability of exceeding specific wind threshold values, and help to improve the overall upper winds forecast for the launch customer. This presentation will describe how the AMU calculated the historical and real-time PoV values for the specific upper-level wind launch constraints and outline the development of the interactive GUI display.

Shafer, Jaclyn A.↗

Vandenberg Air Force Base Upper Level Wind Launch Weather Constraints

The 30th Operational Support Squadron Weather Flight (30 OSSWF) provides comprehensive weather services to the space program at Vandenberg Air Force Base (VAFB) in California. One of their responsibilities is to monitor upper-level winds to ensure safe launch operations of the Minuteman III ballistic missile. The 30 OSSWF tasked the Applied Meteorology Unit (AMU) to analyze VAFB sounding data with the goal of determining the probability of violating (PoV) their upper-level thresholds for wind speed and shear constraints specific to this launch vehicle, and to develop a tool that will calculate the PoV of each constraint on the day of launch. In order to calculate the probability of exceeding each constraint, the AMU collected and analyzed historical data from VAFB. The historical sounding data were retrieved from the National Oceanic and Atmospheric Administration Earth System Research Laboratory archive for the years 1994-2011 and then stratified into four sub-seasons: January-March, April-June, July-September, and October-December. The maximum wind speed and 1000-ft shear values for each sounding in each subseason were determined. To accurately calculate the PoV, the AMU determined the theoretical distributions that best fit the maximum wind speed and maximum shear datasets. Ultimately it was discovered that the maximum wind speeds follow a Gaussian distribution while the maximum shear values follow a lognormal distribution. These results were applied when calculating the averages and standard deviations needed for the historical and real-time PoV calculations. In addition to the requirements outlined in the original task plan, the AMU also included forecast sounding data from the Rapid Refresh model. This information provides further insight for the launch weather officers (LWOs) when determining if a wind constraint violation will occur over the next few hours on day of launch. The interactive graphical user interface (GUI) for this project was developed in Microsoft Excel using Visual Basic for Applications. The GUI displays the critical sounding data easily and quickly for the LWOs on day of launch. This tool will replace the existing one used by the 30 OSSWF, assist the LWOs in determining the probability of exceeding specific wind threshold values, and help to improve the overall upper winds forecast for the launch customer.

Shafer, Jaclyn A.↗

Hurricane Debby - Analysis and numerical forecasts using VAS soundings

The utility of VISSR Atmospheric Sounder (VAS) temperature and moisture soundings in defining the storm and its surroundings at subsynoptic scales has been examined using a numerical analysis and prognosis system. In particular, VAS temperature and moisture soundings and cloud and water vapor motion winds have been used in numerical analysis for three time periods. It is shown that the VAS temperature and moisture data which specify temperature and moisture well in cloud free regions are complemented by cloud and water vapor wind data which provide horizontal gradient information for the cloudy areas. The loss of analysis integrity due to the reduction of VAS data density in the cloudy regions associated with synoptic activity is ameliorated by using cloud and water vapor motion winds. The improvement in numerical forecasts resulting from the addition of these data to the numerical data base is also recorded.

Le Marshall, J. F.↗

Hurricane Debby - An illustration of the complementary nature of VAS soundings and cloud and water vapor motion winds

The utility of VISSR Atmospheric Sounder (VAS) temperature and moisture soundings and cloud and water vapor motion winds in defining a storm and its surroundings at subsynoptic scales has been examined using a numerical analysis and prognosis system. It is shown that the VAS temperature and moisture data, which specify temperature and moisture well in cloud-free areas, are complemented by cloud and water vapor motion data generated in the cloudy areas. The cloud and water vapor 'winds' provide thermal gradient information for interpolating the soundings across cloudy regions. The loss of analysis integrity due to the reduction of VAS sounding density in the cloudy regions associated with synoptic activity is ameliorated by using cloud and water vapor motion winds. The improvement in numerical forecasts resulting from the addition of these data to the numerical analysis is recorded.

Le Marshall, J. F.↗

The Impact of the Assimilation of Hyperspectral Infrared Retrieved Profiles on Advanced Weather and Research Model Simulations of a Non-Convective Wind Event

Tropopause folds are identified by warm, dry, high-potential vorticity, ozone-rich air and are one explanation for damaging non-convective wind events. Could improved model representation of stratospheric air and associated tropopause folding improve non-convective wind forecasts and high wind warnings? The goal of this study is to assess the impact of assimilating Hyperspectral Infrared (IR) profiles on forecasting stratospheric air, tropopause folds, and associated non-convective winds: (1) AIRS: Atmospheric Infrared Sounder (2) IASI: Infrared Atmospheric Sounding Interferometer (3) CrIMSS: Cross-track Infrared and Microwave Sounding Suite

Brendt. Emily↗

A satellite-borne radar wind sensor (RAWS)

Modeling global atmospheric circulations and forecasting the weather would improve if worldwide information on winds aloft were available. Accurate prediction of weather is important to agriculture, shipping, air traffic, and many other fields. Global system models of climate are of great importance. Current global atmospheric models use pressure measurements and thermodynamic properties to calculate the effects of wind for use in Numerical Weather Prediction (NWP) models. Inputs to the NWP models are temperature, pressure and wind velocities at different heights. Clearly direct wind measurements could significantly improve the NWP model performance. The RAdar Wind Sounder (RAWS) program at the University of Kansas is a study of the feasibility and the trade-offs in the design of a space-based radar system to measure wind vectors. This can be done by measuring the Doppler shift of cloud and rain returns from three or more points and calculating the components of the wind vector. The RAWS study to date uses the candidate system selected after preliminary study of frequencies and sensitivities. Two frequencies chosen, 10 and 35 GHz, allow higher sensitivity for clouds and more penetration for rain. The past year was devoted to modeling the signal-to-noise ratio (SNR) achievable for the two frequencies. The determination of SNR versus cloud penetration depth used a cloud backscattering and attenuation model in the appropriate radar equation. Calculations assumed reasonable losses in reception and transmission, in addition to the atmospheric attenuation. We discovered that ice clouds provide a higher SNR than previously calculated, but some water clouds give lower SNRs than we calculated before. One of the primary issues in the SNR calculation was the choice of the drop size distribution. Although Xin used several distributions (e.g., log normal, Khrigian and Mazin), this year we used the Deirmendjian cloud model. SNR versus cloud penetration plots were generated to validate the candidate system. Rain, which appears in the cloud models at the lower altitudes, provides ample SNR, as do the higher clouds composed of ice particles. However, in some cloud situations we found the sensitivity for the clouds was marginal or inadequate. At 35 GHz, two of the cloud models characterized by 1 to 2 g/cu m of water content at altitudes extending from 150 to 1500 meters, produced a sufficient SNR. Other models, however, with water contents ranging from 0.5 to 4 g/cu m and altitudes up to 4000 meters, exhibit SNR of -3 to -23 dB, largely because of attenuation in the upper cloud layers. These results coupled with the lower SNR at 10 GHz, led to an investigation of alternate frequencies. The rain present beneath these clouds provides adequate SNR at 10 GHz, and in most cases, at GHz.

Moore, Richard K.↗

Forecasting the Ambient Solar Wind with Numerical Models. I. On the Implementation of an Operational Framework

The ambient solar wind conditions in interplanetary space and in the near-Earth environment are determined by activity on the Sun. Steady solar wind streams modulate the propagation behavior of interplanetary coronal mass ejections and are themselves an important driver of recurrent geomagnetic storm activity. The knowledge of the ambient solar wind flows and fields is thus an essential component of successful space weather forecasting. Here, we present an implementation of an operational framework for operating, validating, and optimizing models of the ambient solar wind flow on the example of Carrington Rotation 2077. We reconstruct the global topology of the coronal magnetic field using the potential field source surface model (PFSS) and the Schatten current sheet model (SCS) and discuss three empirical relationships for specifying the solar wind conditions near the Sun, namely the Wang–Sheeley (WS) model, the distance from the coronal hole boundary model (DCHB), and the Wang-Sheeley–Arge (WSA) model. By adding uncertainty in the latitude about the sub-Earth point, we select an ensemble of initial conditions and map the solutions to Earth by the Heliospheric Upwind eXtrapolation (HUX) model. We assess the forecasting performance from a continuous variable validation and find that the WSA model most accurately predicts the solar wind speed time series (RMSE≈83 km/s). We note that the process of ensemble forecasting slightly improves the forecasting performance of all solar wind models investigated. We conclude that the implemented framework is well suited for studying the relationship between coronal magnetic fields and the properties of the ambient solar wind flow in the near-Earth environment.

Reiss, Martin A.↗

Impacts of Non-Simultaneous Global Photospheric Magnetic Measurements on Coronal and Solar Wind Modeling

The intensity and arrival time of coronal mass ejections (CMEs) can be significantly influenced by the background solar wind encountered as they propagate outward from the Sun into the interplanetary medium. In addition, solar energetic particles (SEPs) race ahead of CME shock fronts and flare regions along magnetic field lines largely determined by the background solar wind. Predicting the solar wind accurately is therefore critical for improving forecasts of CMEs, SEPs, and high-speed streams. Modeling of the corona and solar wind is challenging in general, as it is highly dependent on global photospheric magnetic field maps, which serve as the boundary conditions to all coronal models that drive solar wind models. Unfortunately, less than half of the Sun’s photospheric magnetic field is reliably measured from any given vantage point and thus it is common for the maps to have highly dated and unreliable measurements in them. While Solar Obiter (SolO) now provides for the first time the opportunity to have simultaneous measurements of nearly the entire surface magnetic field of Sun (e.g., when SolO/PHI measurements are combined with those from SDO/HMI), the required alignment to accomplish this occurs only occasionally. Further, coronal models are extremely sensitive to the strengths of the polar magnetic fields of the Sun, which remain poorly observed. Recently, efforts to mitigate this problem include using flux transport models such as the Air Force Data Assimilative Photospheric Flux Transport (ADAPT) model, which evolves the field forward in time using well known transport processes occurring on the Sun. However, it cannot account for the emergence of new magnetic flux without direct observations. The ESA VIGIL mission will eventually provide continuous observations from the L5, and the proposed SunCHASER mission will likewise do this at the L4 vantage point should it be funded. Ultimately, what is needed is a constellation of spacecraft distributed around the Sun with magnetographs that continuously measure the global surface magnetic field. In this talk, we discuss how the lack of simultaneous global measurements of the photospheric magnetic field adversely impacts the predictive performance of coronal and solar wind models.

C. Nick Arge↗

Operational Use of the AIRS Total Column Ozone Retrievals Along with the RGB Air Mass Product as Part of the GOES-R Proving Ground

The National Oceanic and Atmospheric Administration (NOAA) National Centers for Environmental Prediction (NCEP) Hydrometeorological Prediction Center (HPC) and Ocean Prediction Center (OPC) provide short-term and medium-range forecast guidance of heavy precipitation, strong winds, and other features often associated with mid-latitude cyclones over both land and ocean. As a result, detection of factors that lead to rapid cyclogenesis and high wind events is key to improving forecast skill. One phenomenon that has been identified with these events is the stratospheric intrusion that occurs near tropopause folds. This allows for deep mixing near the top of the atmosphere where dry air high in ozone concentrations and potential vorticity descends (sometimes rapidly) deep into the mid-troposphere. Observations from satellites can aid in detection of these stratospheric air intrusions (SAI) regions. Specifically, multispectral composite imagery assign a variety of satellite spectral bands to the red, green, and blue (RGB) color components of imagery pixels and result in color combinations that can assist in the detection of dry stratospheric air associated with PV advection, which in turn may alert forecasters to the possibility of a rapidly strengthening storm system. Single channel or RGB satellite imagery lacks quantitative information about atmospheric moisture unless the sampled brightness temperatures or other data are converted to estimates of moisture via a retrieval process. Thus, complementary satellite observations are needed to capture a complete picture of a developing storm system. Here, total column ozone retrievals derived from a hyperspectral sounder are used to confirm the extent and magnitude of SAIs. Total ozone is a good proxy for defining locations and intensity of SAIs and has been used in studies evaluating that phenomenon (e.g. Tian et al. 2007, Knox and Schmidt 2005). Steep gradients in values of total ozone seen by satellites have been linked to stratosphere-troposphere exchange (WMO, 1985).

Folmer, Michael↗

Assimilation of DAWN Doppler Wind Lidar Data During the 2017 Convective Processes Experiment (CPEX): Impact on Precipitation and Flow Structure

An improved representation of 3-D air motion and precipitation structure through forecast models and assimilation of observations is vital for improvements in weather forecasting capabilities. However, there are few independent data to properly validate a model forecast of precipitation structure when the underlying dynamics are evolving on short convective timescales. Using data from the JPL Ku/Ka-band Airborne Precipitation Radar (APR-2) and the 2 μmDoppler Aerosol Wind (DAWN) lidar collected during the2017 Convective Processes Experiment (CPEX), the NASA Unified Weather Research and Forecasting (WRF) Ensemble Data Assimilation System (EDAS) modeling system was used to quantify the impact of high-resolution sparsely sampled DAWN measurements on the analyzed variables and on the forecast when the DAWN winds were assimilated. Over-all, the assimilation of the DAWN wind profiles had a discernible impact on the wind field as well as the evolution and timing of the 3-D precipitation structure. Analysis of individual variables revealed that the assimilation of the DAWN winds resulted in important and coherent modifications of the environment. It led to an increase in the near-surface convergence, temperature, and water vapor, creating more favorable conditions for the development of convection exactly where it was observed (but not present in the control run). Comparison to APR-2 and observations by the Global Precipitation Measurement (GPM) satellite shows a much-improved forecast after the assimilation of the DAWN winds – development of precipitation where there was none, more organized precipitation where there was some, and a much more intense and organized cold pool, similar to the analysis of the dropsonde data. The onset of the vertical evolution of the precipitation showed similar radar-derived cloud-top heights, but delayed in time. While this investigation was limited to a single CPEX flight date, the investigation design is appropriate for further investigation of the impact of airborne Doppler wind lidar observations upon short-term convective precipitation forecasts

DAWN↗