Search NASA⌕ Search

SEARCH · Search NASA

Results for “XRD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Interaction of atomic oxygen with thin film and bulk copper: An XPS, AES, XRD, and profilometer study

The University of Alabama in Huntsville (UAH) experiment A-0114 was designed primarily to study degradation of material surfaces due to low earth orbital (LEO) atmospheric oxygen. The experiment contained 128 one inch circular samples: metals, polymers, carbons, and semiconductors. Among metal samples, copper has shown some interesting new results. Two types of copper samples, a film sputter coated on fused silica and a bulk piece of OFHC copper, were characterized employing a variety of techniques such as X-ray and Auger electron spectroscopies, X-ray diffraction, and high resolution profilometry. Cu 2p core level spectra were used to characterize the presence of Cu2O and CuO in addition to Cu Auger LMM lines. These results are supported by our recent X-ray diffraction studies which clearly establish the presence of Cu oxides which we were unable to prove in our earlier work. Profilometry showed an increase in thickness of the film sample where exposed to 106.7 +/- 0.5 nm from an initial thickness of 74.2 +/- 1.1 nm. Further studies with SEM and ellipsometry are underway.

Raikar, Genesh N.↗
NASA NTRS1993

The interaction of atomic oxygen with copper: An XPS, AES, XRD, optical transmission, and stylus profilometry study

The University of Alabama in Huntsville (UAH) experiment A-0114 was designed to study the reaction of material surfaces with low earth orbits (LEO) atmospheric oxygen. The experiment contained 128 one-inch circular samples; metals, polymers, carbons, and semiconductors. Half of these samples were exposed on the front of the Long Duration Exposure Facility (LDEF) and remaining on the rear. Among metal samples, copper has shown some interesting new results. There were two forms of copper samples: a thin film sputter-coated on fused silica and a solid piece of OFHC copper. They were characterized by x-ray and Auger electron spectroscopies, x-ray diffraction, and high resolution profilometry. Cu 2p core level spectra were used to demonstrate the presence of Cu2O and CuO and to determine the oxidation states.

Raikar, Ganesh N.↗
NASA NTRS2001

Aerogel as a Sample Collector and Sample Mount for Transmission XRD Analysis

Silica aerogel can be used for dust collection and in situ X-ray analysis. Aerogels can be less absorbing than Be, and it is feasible to obtain X-ray transmission factors >50% using typical aerogels together with a 100-micrometer Be backing foil. Additional information is contained in the original extended abstract.

Bish, D. L.↗
NASA NTRS2020

Using XRD to Characterize Sediment Sorting in a Mars Analog Glacio-Fluvio-Eolian Basaltic Sedimentary System in Iceland

The martian surface has a primarily basaltic composition and is dominated by sedimentary deposits. Ancient layered sedimentary rocks have been identified across the planet from orbit, have been studied in situ by the Mars Exploration Rovers and the Mars Science Laboratory rover, and will be studied by the Mars 2020 rover. These ancient sedimentary rocks were deposited in fluvial, lacustrine, and eolian environments during a warmer and wetter era on Mars. It is important to study the composition of sediments in Mars analog environments to characterize how minerals in basaltic sedimentary systems are sorted and/or aqueously altered. This information can help us better interpret sedimentary processes from similar deposits on Mars and derive information about the igneous source rocks. Sediment sorting has been studied extensively on Earth, but not typically in basaltic environments. Previous work has addressed sorting of basaltic sediments through experimental techniques and in modern eolian basaltic systems and aqueous alteration in subglacial and proglacial environments. We add to this body of research by studying sediment sorting and aqueous alteration in a glacio-fluvio-eolian basaltic system in southwest Iceland.

Rampe, E. B.↗
NASA NTRSDate not supplied

Recent Mineralogical Discoveries in Gale Crater, Mars from the CheMin XRD Instrument

Curiosity landed in Gale crater in August 2012 and has traversed ~27 km through sedimentary rocks that comprise the lower slopes of a ~5 km-high mound, informally known as Mount Sharp, to investigate depositional/diagenetic environments and potential habitability. Orbital visible/short-wave infrared spectra revealed some strata on lower Mount Sharp contain mineral assemblages that are indicative of water-rock interactions (1-3), with sulfate-bearing units overlying phyllosilicate-bearing units. This mineralogical succession may mark the beginning of the transition from a relatively wet/warm to a very dry/cold Mars (e.g., 1, 4). Curiosity began studying the strata that show mineralogical signatures from orbit in 2018, with the investigation of Vera Rubin ridge. Here, we describe the mineralogical diversity in these strata using X-ray diffraction data collected by the CheMin instrument. We report on the mineral assemblages from the hematite-rich Vera Rubin ridge, the smectite-rich Glen Torridon region, and the transition from the smectite-bearing rocks to the sulfate-bearing unit. We will present hypotheses explaining the changes in mineralogy throughout the strata, including changes in depositional environment, diagenetic reactions with saline groundwater, and groundwater-lake water interactions (e.g., 5-7).

V. M. Tu↗
DOE OSTI2026

Insights on carbon dioxide adsorption in a flexible 1-D coordination polymer from in situ X-ray scattering and density functional theory

A combination of in situ small-angle X-ray scattering (SAXS) microstructure characterization over scales ranging from 1 nm to 10 µm and powder X-ray diffraction (XRD) structure characterization under various gas/pressure/temperature conditions with density functional theory (DFT) calculations provides new insights for the CO2 sorption behavior of a one-dimensional porous coordination polymer: catena-bis­(di­benzoyl­methanato)(4,4′-bi­pyridyl)­nickel(II), denoted NiDBM-Bpy. The NiDBM-Bpy chains are held together by van der Waals forces, but the structure of guest-free NiDBM-Bpy is unsolved due to a lack of suitable crystals and high-quality powder XRD patterns. Nevertheless, SAXS and powder XRD can follow microstructural and structural changes as a function of gas pressure, composition and temperature. Both mixed-gas flow and static supercritical CO2 regimes are explored experimentally. DFT calculations are used to model the structural variation associated with XRD changes and hysteresis in the sorption isotherms. XRD and DFT calculations suggest that an orthorhombic Fddd structure with two CO2 per Ni emerges following a transition from the structure with lower molar volume and symmetry that exists without CO2 present.

Allen, Andrew J.↗
NASA NTRS1988

Residual stresses in continuous graphite fiber Al metal matrix composites

The residual stresses in graphite fiber reinforced aluminum (Gr/Al) composites with various thermal histories are measured using X-ray diffraction (XRD) methods. The XRD stress analysis is based on the determination of lattice strains by precise measurements of the interplanar spacings in different directions of the sample. The sample is a plate consisting of two-ply P 100 Gr/Al 6061 precursor wires and Al 6061 overlayers. Prior to XRD measurement, the 6061 overlayers are electrochemically removed. In order to calibrate the relationship between stress magnitude and lattice spacing shift, samples of Al 6061 are loaded at varying stress levels in a three-point bend fixture, while the stresses are simultaneously determined by XRD and surface-attached strain gages. The stresses determined by XRD closely match those determined by the strain gages. Using these calibrations, the longitudinal residual stresses of P 100 Gr/Al 6061 composites are measured for various heat treatments, and the results are presented.

Park, Hun Sub↗
NASA NTRS1999

Remote X-Ray Diffraction and X-Ray Fluorescence Analysis on Planetary Surfaces

The legacy of planetary X-ray Diffraction (XRD) and X-ray Fluorescence (XRF) began in 1960 when W. Parish proposed an XRD instrument for deployment on the moon. The instrument was built and flight qualified, but the Lunar XRD program was cancelled shortly before the first human landing in 1969. XRF chemical data have been collected in situ by surface landers on Mars (Viking 1 & 2, Pathfinder) and Venus (Venera 13 & 14). These highly successful experiments provide critical constraints on our current understanding of surface processes and planetary evolution. However, the mineralogy, which is more critical to planetary surface science than simple chemical analysis, will remain unknown or will at best be imprecisely constrained until X-ray diffraction (XRD) data are collected. Recent progress in X-ray detector technology allows the consideration of simultaneous XRD (mineralogic analysis) and high-precision XRF (elemental analysis) in systems miniaturized to the point where they can be mounted on fixed landers or small robotic rovers. There is a variety of potential targets for XRD/XRF equipped landers within the solar system, the most compelling of which are the poles of the moon, the southern highlands of Mars and Europa.

Blake, David F.↗
NASA NTRS2004

Evaluation of Rock Powdering Methods to Obtain Fine-grained Samples for CHEMIN, a Combined XRD/XRF Instrument

A miniature XRD/XRF (X-ray diffraction / X-ray fluorescence) instrument, CHEMIN, is currently being developed for definitive mineralogic analysis of soils and rocks on Mars. One of the technical issues that must be addressed to enable remote XRD analysis is how best to obtain a representative sample powder for analysis. For powder XRD analyses, it is beneficial to have a fine-grained sample to reduce preferred orientation effects and to provide a statistically significant number of crystallites to the X-ray beam. Although a two-dimensional detector as used in the CHEMIN instrument will produce good results even with poorly prepared powder, the quality of the data will improve and the time required for data collection will be reduced if the sample is fine-grained and randomly oriented. A variety of methods have been proposed for XRD sample preparation. Chipera et al. presented grain size distributions and XRD results from powders generated with an Ultrasonic/Sonic Driller/Corer (USDC) currently being developed at JPL. The USDC was shown to be an effective instrument for sampling rock to produce powder suitable for XRD. In this paper, we compare powder prepared using the USDC with powder obtained with a miniaturized rock crusher developed at JPL and with powder obtained with a rotary tungsten carbide bit to powders obtained from a laboratory bench-scale Retsch mill (provides benchmark mineralogical data). These comparisons will allow assessment of the suitability of these methods for analysis by an XRD/XRF instrument such as CHEMIN.

Chipera, S. J.↗
NASA NTRS2016

Is Tridymite at Gale Crater Evidence for Silicic Volcanism on Mars?

The X-ray diffraction (XRD) instrument (CheMin) onboard the MSL rover Curiosity detected 17 wt% of the SiO2 polymorph tridymite (relative to bulk sample) for the Buckskin drill sample (73 wt% SiO2) obtained from sedimentary rock in the Murray formation at Gale Crater, Mars. Other detected crystalline materials are plagioclase, sanidine, cristobalite, cation-deficient magnetite, and anhydrite. XRD amorphous material constitutes approx. 60 wt% of bulk sample, and the position of its broad diffraction peak near approx. 26 deg. 2-theta is consistent with opal-A. Tridymite is a lowpressure, high-temperature mineral (approx. 870 to 1670 deg. C) whose XRD-identified occurrence on the Earth is usually associated with silicic (e.g., rhyolitic) volcanism. High SiO2 deposits have been detected at Gale crater by remote sensing from martian orbit and interpreted as opal-A on the basis H2O and Si-OH spectral features. Proposed opal-A formation pathways include precipitation of silica from lake waters and high-SiO2 residues of acid-sulfate leaching. Tridymite is nominally anhydrous and would not exhibit these spectral features. We have chemically and spectrally analyzed rhyolitic samples from New Mexico and Iwodake volcano (Japan). The glassy (by XRD) NM samples have H2O spectral features similar to opal-A. The Iwodake sample, which has been subjected to high-temperature acid sulfate leaching, also has H2O spectral features similar to opal-A. The Iwodake sample has approx. 98 wt% SiO2 and 1% wt% TiO2 (by XRF), tridymite (>80 wt.% of crystalline material without detectable quartz by XRD), and H2O and Si-OH spectral features. These results open the working hypothesis that the opal-A-like high-SiO2 deposits at Gale crater detected from martian orbit are products of alteration associated with silicic volcanism. The presence or absence of tridymite will depend on lava crystallization temperatures (NM) and post crystallization alteration temperatures (Iwodake).

Morris, Richard V.↗
NASA NTRSDate not supplied

Examining Weathering of Magnesite in an Arid Environment: Implications For Jezero Crater

Introduction:Orbiter data indicatethe presence of carbonates in severallocations on the surface of Mars[1],but Jezero crater, landing site of the Perseverancerover,is the only known location where carbonatesap-pear coincident with evidence of fluvialand lacustrineactivity [2].On Earth, carbonates in close proximity to these paleoenvironments mayindicatethe presence of past microbial life,like stromatolites[3], that could re-sult inbiosignatures [2]. However,in other cases,car-bonates can also form throughthe alteration of mafic materialwiththe introductionof carbonic acid[4].Hy-drated magnesites have also been found in evaporative environments along lake shores, and in playas[5,6,7].Correctly interpreting past carbonates on Mars is there-fore critical in the search for past signs of life. In Jezero crater,both thenorthernand western fans haveMg-rich carbonates intermixed with olivine-rich material[8].According to CRISM data, magnesite(MgCO3), along with hydromagnesite(Mg5(CO3)4(OH)2•4H2O), arepotential candidatesfor these Mg-carbonates [2]. Considering the spatial con-text with olivine,there aremultiplepotential explana-tions for the presence ofMg-carbonatesin this locationincludingin-situformation via alterationof olivine-rich materialwith carbonic acid,transportationfrom farther up in the watershed, or precipitation of lacustrine car-bonates[2]. The formation of hydromagnesite rather than magnesite is favored when Mg2+saturated solutions have a high CO32-/HCO3-ratio, which, on Earth, is thought to be caused byinflow of groundwater [4]. Additionally, Mg-carbonates tend to precipitate under high pH condi-tions and are unstable at lower pH conditions [5]. Hy-dromagnesite is stable at atmospheric CO2pressure and temperature conditions common to most Earth surface environments [9]. However, it is subject to transfor-mation to magnesite after dehydration and concomitant brucite formation or dissolution and reprecipitation [10].Previousresearch suggests that hydrated car-bonates, including hydromagnesite, can formas weath-ering productsof mafic minerals in the presenceof H2O and CO2in subfreezing temperatures and would not de-hydrate under Martian atmospheric conditions [11,12].It is critical to understand the formation conditions of Mg-carbonatesbecause of the different implications for the past history of Martian environments. Therefore, in this work we are investigating the weathering of Mg-carbonatesin arid environments to helpbetter understand Mg-carbonates in Jezero crater. Study Area:The Ala-Mar Mines(East and West)near Ely, NVare the site ofmultiple magnesitedepositsfound within a calcareous tuff formationthat overlies Tertiary aged volcanic rocks.Here,magnesiteis formed via the alteration of the calcareous tuff and occurs innodules, veins,and lenses[13]. Previous work suggests magnesite deposits are associated with faults [13]. Within the West Mine, magnesite can be found in two maincontexts: (1) relatively circular zones of cauli-flower-like material found within (2) a more massivelensthat is heavily fractured on the surface.Methods.Samplesof both the cauliflower texture and more massive materialwere collectedat Ala Mar West Mine. Both samples were thenpowdered, sieved and analyzed with an inXitu Terra Portable XRD. The program QualX was used to identify potential mineral phases [14].Both samples were also optically inspected using 10x and 20x hand lenses.Figure 1. XRD patterns for the cauliflower magnesite (top) and massive magnesite (bottom). Ongoing and future work on the samples discussed above includes scanning electron microscopy (SEM), electron microprobe analysis (EMPA), and near-infra-red spectroscopy to determine whether hydromagnesite is present. Separation and analysis of the clay-size frac-tionby XRD will helpto better identify any phyllosili-cate phases present. Results and Discussion:Both textures are a white to light tan with a porcelain luster on weathered sur-faces, along with minor iron staining in some areas. Likewise, both textures are white with a porcelain luster on fresh surfaces. When broken apart, the massive mag-nesite shows macroscopic crystals, unlike the cauli-flower magnesite. XRD analysis shows that both samples have high concentrationsof magnesite with lesser amounts of thecarbonatemineral huntite(Mg3Ca(CO3)4; Figure1).The more massive samplecontainsa serpentine-groupmineral,with lizardite being apotential candidate. The cauliflower sample has several minor peaks that may correspond to hydromagnesite(Figure 1), although more work is needed to confirm this.Additionally, thecauliflower deposits closely resemble hydromagnesite deposits found in southwestern Turkey, formed via mi-crobialites[15].As such, it is likely that moreaqueous alterationor weatheringis occurring at the locations where the cauliflower magnesite is present. However, additional field work will need to be conducted to con-firm this hypothesis. Conclusions and Future Work:Future work will include field mapping of fault locations andadditional samplingof the different magnesite types as well as of the calcareous tuffmaterial.We will also look specifi-cally for potential weathering products of magnesite in this arid location, which may yield important insight into the Mg-carbonates located in Jezero crater. XRD analyses on aPANalytical XRDusing non-ambient stages will be used to investigate the stability of hydro-magnesiteat different humiditiesand temperatures, which has implications for samples to bereturned to Earth in the future. Additionally, thermal and evolved gas analysis of magnesite and hydromagnesite will be compared to results from Gale Craterto help interpret the mineralogy inthat location[16]. The results of this research will further ourunderstanding of carbonate for-mationin volcanic settingsandtheirweathering pro-cessesin arid environments. Acknowledgments:We acknowledge funding for this research from Jacobs Technology at the Johnson Space Center.We would also like to thank Ngoc Luu, Christopher Adcock, Richard Allanson, and the rest of the UNLV Soil Science Teamfor their continued sup-portwith troubleshooting and otherlab work. References:[1] Ehlmann, B.L., and Edwards, C.S. (2014) Annual Review of Earth and Planetary Sci., 42, 291–315. [2] Horgan, B.H.N., et al. (2020) Icarus, 339, 113526. [3] Bosak, T., et al. (2013) Annual Review of Earth and Planetary Sci, 41, 21–44. [4] Pohl, W.L. (1989) Gebriider Borntraege, 28, 1-13. [5] Müller, G., et al. (1972) Die Naturwissenschaften, 59, 158–164. [6] Walter, M.R., et al. (1973) Journal of Sedimentary Pe-trology, 43, 1021–1030. [7] Braithwaite, C.J.R., and Zedef, V. (1994) Sedimentary Geology, 92, 1–5. [8] Goudge, T.A., et al. (2015) JGR: Planets, 120, 775–808. [9] Langmuir, D. (1965) Journal of Geology, 73, 730–754. [10] Zhang, P., et al. (2000) Applied Geo-chem., 286, 1748–1753. [11] Calvin, W.M., et al. (1994) JGR, 99, 14659-14675. [12]Russell, M.J., et al. (1999) Journal of the Geological Society of London, v. 156, p. 869–888. [13] Faust, G.T., and Callaghan, E. (1948) GSA Bulletin, 59, 11–74. [14] Altomare, A., et al. (2015) J. of Applied Crystallography, 48, 598–603. [15] Zedef, V.,et al. (2000) Economic Geology, 95, 429–445. [16] Leshin, L.A. et al., (2013) Science, 341, 1–9

A W Provow↗
NASA NTRSDate not supplied

Laboratory Investigation of the Effect of Venusian Weathering on Mineral Spectra

Introduction: The recent selection of two missions to Venus has renewed the importance of deter-mining weathering reactions between minerals and the Venusian atmosphere, and the spectral signatures of minerals before, during, and after these reactions. The rate at which weathering reactions progress also constrain show long unstable minerals will be present on the surface (e.g., [1]), and enables the use of mineralogy as a constraint on surface age(e.g., [2-3]).In order to gain an understanding of how mineral compositions and spectra change with weathering, we have begun conducting experiments in a 1 atm experimental setup at Wesleyan University. This setup exposes minerals to the temperature and most abundant gases of the Venus atmosphere (CO2, SO2, N2).We conducted initial experiments using biotite, calcite, and montmorillonite in order to test our methodology with minerals that may be relevant to recording the history of water on Venus. Methods: Experiments were conducted in Thermo Fisher Scientific Lindberg/Blue M Mini-Mite horizontal tube furnaces at Wesleyan University. Experiments used natural mineral chips and powders, and were conducted at 1 atmosphere and 460 °C under pre-mixed gases provided by Air Gas(Table 1). The furnaces are set up in a flow through configuration so that solid samples are exposed to a fixed gas composition, and quartz glass process tubes were used in all experiments (1/4” diameter for experiment V4, ½” diameter for all others). These conditions were maintained for the du-rations listed in Table 1, at which point the furnace was turned off with gas flowing until the sample was cool enough to extract under N2and be placed in a desiccator for storage. Run products were carbon coated and examined using a Hitachi SU5000 Field Emission Gun Scanning Electron Microscope (SEM) equipped with an EDAX Octane Pro EDS detector located at Wesley-an University. Visible-Near Infrared Spectroscopy (VNIR) analysis was performed on powdered samples under a nitrogen atmosphere using an ASD Fieldspec Proover the 350-2500 nm range. Powdered mineral samples were milled to a particle size of < 45μm and were spiked with an internal standard (Al2O3, corundum) to obtain quantitative mineralogy. Samples were analyzed using a Panalytical X’Pert pro X-ray Diffractometer (XRD), with an X’Celerator high speed detector and Co Kα radiation, with data collected at a step size of 0.02 ̊/minute step counting rate from 2 to 80 degrees 2θ at 45 mA/40kV in the X-ray Diffraction Laboratory located at NASA Johnson Space Center. Materials Data Inc (MDI) software suite, JadeTMv9 was used for Rietveld refinement to determine phase abundances and mineral identification by comparing XRD patterns to International Center for Diffraction Data (ICDD) database patterns. Table 1: Experimental matrix. Experiment Name Duration (Days)Gas Com-position (trace gas)MineralsV487SO2/N2(1.4%)Montmorillonite, biotiteV519SO2/N2(1.4%)CalciteV619CO2/SO2/N2(1.4% SO2, 2.1% N2)Montmorillonite, biotiteV828SO2/N2(1.4%)Biotite, calcite Results: Calcite. In both experiments, calcite was exposed to the SO2/N2gas mixture, and in both experimental run products, XRD analysis detected anhydrite, which is consistent with EDS measurements conducted in the SEM. The XRD analyses show greater amounts of anhydrite present after 28 days than 19, suggesting the calcite reaction progressed further given longer duration. Grain surface morphology as seen in the SEM also shows secondary mineral growth (Fig. 1). VNIR spectra show no change, as expected since anhydrite lacks spectral features in this wavelength range. Montmorillonite. Montmorillonite was exposed to two different gas mixtures, the SO2/N2mix and CO2/SO2/N2mix over different durations (87 and 19 days, respectively). VNIR analyses of both run products show a reduction in the 1441and1910 nm water features as well as a shift of the 1411 and 2011 nm features to shorter wavelengths that may indicate re-structuring in the crystal lattice and the production of amorphous phases [4]. XRD results are consistent with this, showing a shift of the 001 peak from 15Åto 10Åin both run products. The amount of X-ray amorphous material in the montmorillonite run products was greater than that present in the unreacted clay, being the greatest in the 87 day V4 experiment. No other secondary phases were detected in the run products, however sulfur was present in EDS analyses of powder samples.

A R Santos↗