Seeding of supercooled polyethylene with extended chain crystals.
Effect of equilibrium crystal seeds on supercooled polyethylene melt and o-xylene solution of polyethylene of same chemical nature
CRYSTAL GROWTH↗
SEARCH · Search NASA
Results for “XYLENE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Alkyl substituent effects on gas-phase acidities - The influence of hybridization.
Exploration of the effect on acidity of alkyl groups bonded to trigonal and digonal carbon. Some results on the relative acidities of toluene and p-xylene, and acetylene and substitute acetylenes, as determined by ion cyclotron resonance (icr) spectroscopy, are described. Some limitations of the CNDO/2 calculation method are discussed.
Brauman, J. I.↗
Phenylquinoxaline copolymers
The preparation of a series of homopolymers and block and random type phenylquinoxaline copolymers is described together with their important characteristics and preliminary measurements of composite properties. Phenylquinoxaline homopolymers consisting of low, intermediate, and high molecular weight versions were prepared from the reaction of 3,3'-diaminobenzidine (DAB) and 3,3',4,4'-tetraaminobenzophenone (TAB), each with p-bis(phenylglyoxalyl)benzene as solutions (18% solids content) in a 1:1 mixture of m-cresol and xylene. Three random and three block copolymers were prepared from the reaction of various amounts of DAB and TAB with p-bis(phenylglyoxalyl)benzene. The copolymers were prepared with DAB to TAB distribution ratios of 3:1, 1:1, and 1:3. The work was performed primarily to determine if phenylquinoxaline copolymers exhibit any advantage over the homopolymers for use as functional or structural resins, especially as a matrix material in combination with a high-modulus graphite fiber reinforcement.
Hergenrother, P. M.↗
Removing overcoatings from microcircuits
Silicone resin of elastomer overcoatings are removed more quickly from microcircuit chips with hot concentrated sulfuric acid. Process takes few minutes as compared to day or two, using commercial solvents based on toluene, xylene, and like. Overcoatings are removed to expose circuit for failure analysis.
Belcher, J. G., Jr.↗
Deconvolution of gas chromatographic data
The use of deconvolution methods on gas chromatographic data to obtain an accurate determination of the relative amounts of each material present by mathematically separating the merged peaks is discussed. Data were obtained on a gas chromatograph with a flame ionization detector. Chromatograms of five xylenes with differing degrees of separation were generated by varying the column temperature at selected rates. The merged peaks were then successfully separated by deconvolution. The concept of function continuation in the frequency domain was introduced in striving to reach the theoretical limit of accuracy, but proved to be only partially successful.
Howard, S.↗
Characterization of an Experimental Referee Broadened Specification (ERBS) aviation turbine fuel and ERBS fuel blends
Characterization data and comparisons of these data are presented for three individual lots of a research test fuel designated as an Experimental Referee Broadened Specification (ERBS) aviation turbine fuel. This research fuel, which is a blend of kerosene and hydrotreated catalytic gas oil, is a representation of a kerojet fuel with broadened properties. To lower the hydrogen content of the ERBS fuel, a blending stock, composed of xylene bottoms and hydrotreated catalytic gas oil, was developed and employed to produce two different ERBS fuel blends. The ERBS fuel blends and the blending stock were also characterized and the results for the blends are compared to those of the original ERBS fuel. The characterization results indicate that with the exception of the freezing point for ERBS lot 2, which was slightly high, the three lots, produced over a 2 year period, met all general fuel requirements. However, although the properties of the fuels were found to be fairly consistent, there were differences in composition. Similarly, all major requirements for the ERBS fuel blends were met or closely approached, and the properties of the blended fuels were found to generally reflect those expected for the proportions of ERBS fuel and blending stock used in their production.
Seng, G. T.↗
A carbon-13 and proton nuclear magnetic resonance study of some experimental referee broadened-specification /ERBS/ turbine fuels
Preliminary results of a nuclear magnetic resonance (NMR) spectroscopy study of alternative jet fuels are presented. A referee broadened-specification (ERBS) aviation turbine fuel, a mixture of 65 percent traditional kerosene with 35 percent hydrotreated catalytic gas oil (HCGO) containing 12.8 percent hydrogen, and fuels of lower hydrogen content created by blending the latter with a mixture of HCGO and xylene bottoms were studied. The various samples were examined by carbon-13 and proton NMR at high field strength, and the resulting spectra are shown. In the proton spectrum of the 12.8 percent hydrogen fuel, no prominent single species is seen while for the blending stock, many individual lines are apparent. The ERBS fuels were fractionated by high-performance liquid chromatography and the resulting fractions analyzed by NMR. The species found are identified.
Dalling, D. K.↗
Aviation-fuel property effects on combustion
The fuel chemical property influence on a gas turbine combustor was studied using 25 test fuels. Fuel physical properties were de-emphasized by using fuel injectors which produce highly-atomized, and hence rapidly vaporizing sprays. A substantial fuel spray characterization effort was conducted to allow selection of nozzles which assured that such sprays were achieved for all fuels. The fuels were specified to cover the following wide ranges of chemical properties: hydrogen, 9.1 to 15 (wt) pct; total aromatics, 0 to 100 (vol) pct; and naphthalene, 0 to 30 (vol) pct. standard fuels (e.g., Jet A, JP4), speciality products (e.g., decalin, xylene tower bottoms) and special fuel blends were included. The latter group included six, 4-component blends prepared to achieve parametric variations in fuel hydrogen, total aromatics and naphthalene contents. The principle influences of fuel chemical properties on the combustor behavior were reflected by the radiation, liner temperature, and exhaust smoke number (or equivalently, soot number density) data. Test results indicated that naphthalene content strongly influenced the radiative heat load while parametric variations in total aromatics did not.
Rosfjord, T. J.↗
Method of refining 2,2-isopropylidenebis-3,5- dibromophenylene-4-oxydiethanol
A method of refining 2,2-isopropylidenebis-3,5-dibromophenylene-4-oxydiethanol is described which is characterized by recrystallization of 2,2-isopropylidenebis-3,5-dibromophenylene-4-oxydiethanol using one or more aromatic hydrocarbons such as benzene, xylene, toluene, ethylbenzene or pseudocumene.
Kobayashi, T.↗
Influence of fuel chemical properties on gas turbine combustors
In an attempt to rigorously study the fuel chemical property influence, UTRC (United Technologies Research Center) (under contract to NASA Lewis Research Center) has conducted an experimental program using 25 test fuels. The burner was a 12.7 cm dia cylindrical device consisting of six sheet metal louvers. A single pressure atomizing injector and air swirler were centrally mounted with the conical dome. Fuel physical properties were de-emphasized by using fuel injectors which produced highly atomized, and hence rapidly vaporizing sprays. A substantial fuel spray characterization effort was conducted to allow selection of nozzles which assured that such sprays were achieved for all fuels. The fuels were specified to cover the following wide ranges of chemical properties: hydrogen, 9.1 to 15 (wt) pct; total aromatics, 0 to 100 (vol) pct; and naphthalene, 0 to 30 (vol) pct. They included standard fuel (e.g., Jet A, JP4), specialty products (e.g., decalin, xylene tower bottoms) and special fuel blends. Included in this latter group were six, 4-component blends prepared to achieve parametric variations in fuel hydrogen, total aromatics and naphthalene contents.
Rosfjord, T. J.↗
Fuel property effects on USAF gas turbine engine combustors and afterburners
Since the early 1970s, the cost and availability of aircraft fuel have changed drastically. These problems prompted a program to evaluate the effects of broadened specification fuels on current and future aircraft engine combustors employed by the USAF. Phase 1 of this program was to test a set of fuels having a broad range of chemical and physical properties in a select group of gas turbine engine combustors currently in use by the USAF. The fuels ranged from JP4 to Diesel Fuel number two (DF2) with hydrogen content ranging from 14.5 percent down to 12 percent by weight, density ranging from 752 kg/sq m to 837 kg/sq m, and viscosity ranging from 0.830 sq mm/s to 3.245 sq mm/s. In addition, there was a broad range of aromatic content and physical properties attained by using Gulf Mineral Seal Oil, Xylene Bottoms, and 2040 Solvent as blending agents in JP4, JP5, JP8, and DF2. The objective of Phase 2 was to develop simple correlations and models of fuel effects on combustor performance and durability. The major variables of concern were fuel chemical and physical properties, combustor design factors, and combustor operating conditions.
Reeves, C. M.↗
Thermally-Activated Metal-to-Glass Bonding
Hermetic seals formed easily by use of metallo-organic film. Metallo-organic film thermally bonded to glass and soldered or welded to form hermetic seal. Film applied as ink consisting of silver neodecanoate in xylene. Relative amounts of ingredients selected to obtain desired viscosity. Material applied by printing or even by scribing with pen. Sealing technique useful in making solar-cell modules, microelectronic packages, and other hermetic silicon devices.
Gallagher, B. D.↗
Method for forming hermetic seals
The firmly adherent film of bondable metal, such as silver, is applied to the surface of glass or other substrate by decomposing a layer of solution of a thermally decomposable metallo-organic deposition (MOD) compound such as silver neodecanoate in xylene. The MOD compound thermally decomposes into metal and gaseous by-products. Sealing is accomplished by depositing a layer of bonding metal, such as solder or a brazing alloy, on the metal film and then forming an assembly with another high melting point metal surface such as a layer of Kovar. When the assembly is heated above the temperature of the solder, the solder flows, wets the adjacent surfaces and forms a hermetic seal between the metal film and metal surface when the assembly cools.
Gallagher, Brian D.↗
Preparation of B-trichloroborazine
The present invention relates to a method of preparing B-trichloroborazine. Generally, the method includes the combination of gaseous boron trichloride in an anhydrous aprotic organic solvent followed by addition of excess gaseous ammonia at ambient temperature or below. The reaction mixture is heated to about 100 to 140 C followed by cooling, removal of the solid ammonium chloride at ambient temperature, distillation of the solvent under vacuum if necessary at a temperature of up to about 112 C, and recovery of the B-trichloroborazine. Solvents include toluene, benzene, xylene, chlorinated hydrocarbons, chlorinated aromatic compounds, or mixtures thereof. Toluene is a preferred solvent. The process provides a convenient synthesis of a material which often decomposes on standing. B-trichloroborazine is useful in a number of chemical reactions, and particularly in the formation of high temperature inorganic polymers and polymer precursors.
Riccitiello, Salvatore R.↗
Silver Ink For Jet Printing
Metallo-organic ink containing silver (with some bismuth as adhesion agent) applied to printed-circuit boards and pyrolized in air to form electrically conductive patterns. Ink contains no particles of silver, does not have to be mixed during use to maintain homogeneity, and applied to boards by ink-jet printing heads. Consists of silver neodecanoate and bismuth 2-ethylhexanoate dissolved in xylene and/or toluene.
Vest, R. W.↗
Effect of molecular weight on polyphenylquinoxaline properties
A series of polyphenyl quinoxalines with different molecular weight and end-groups were prepared by varying monomer stoichiometry. Thus, 4,4'-oxydibenzil and 3,3'-diaminobenzidine were reacted in a 50/50 mixture of m-cresol and xylenes. Reaction concentration, temperature, and stir rate were studied and found to have an effect on polymer properties. Number and weight average molecular weights were determined and correlated well with viscosity data. Glass transition temperatures were determined and found to vary with molecular weight and end-groups. Mechanical properties of films from polymers with different molecular weights were essentially identical at room temperature but showed significant differences at 232 C. Diamine terminated polymers were found to be much less thermooxidatively stable than benzil terminated polymers when aged at 316 C even though dynamic thermogravimetric analysis revealed only slight differences. Lower molecular weight polymers exhibited better processability than higher molecular weight polymers.
Jensen, Brian J.↗
Symposium (International) on Combustion, 23rd, Universite d'Orleans, France, July 22-27, 1990, Proceedings
The present symposium on combustion discusses reaction kinetics, NO(x) kinetics, premixed, diffusion, and nonsteady flames, turbulent combustion, hazardous waste, fluidized bed combustion, coal boilers and furnaces, engines, heterogeneous kinetics, heterogeneous, droplet, and microgravity combustion, and high-temperature synthesis. Attention is given to reactions of biphenyl, methylnaphthalenes, and phenanthrene with atomic oxygen in the gas phase, the oxidation of ortho-xylene, the effects of water on combustion kinetics at high pressure, and the formation and measurement of N2O in combustion systems. Topics addressed include large ions in premixed benzene-oxygen flames, the structure and kinetics of CH4/N2O flames, the propagation of unsteady hydrogen premixed flames near flammability limits, and the basic structure of lean propane flames. Also considered are OH measurements of piloted diffusion flames of nitrogen-diluted methane near extinction, waste combustion, preferential oxidation of carbon surfaces, and reburning mechanisms in a pulverized coal combustor.
Source record↗
Evaluation of high temperature dielectric films for high voltage power electronic applications
Three high temperature films, polyimide, Teflon perfluoroalkoxy and poly-P-xylene, were evaluated for possible use in high voltage power electronic applications, such as in high energy density capacitors, cables and microelectronic circuits. The dielectric properties, including permittivity and dielectric loss, were obtained in the frequency range of 50 Hz to 100 kHz at temperatures up to 200 C. The dielectric strengths at 60 Hz were determined as a function of temperature to 250 C. Confocal laser microscopy was performed to diagnose for voids and microimperfections within the film structure. The results obtained indicate that all films evaluated are capable of maintaining their high voltage properties, with minimal degradation, at temperatures up to 200 C. However, above 200 C, they lose some of their electrical properties. These films may therefore become viable candidates for high voltage power electronic applications at high temperatures.
Suthar, J. L.↗