Search NASA⌕ Search

SEARCH · Search NASA

Results for “ab initio phasing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Stromataxic Stabilization of a Metastable Layered ScFeO3 Polymorph

Metastable polymorphs--materials with the same stoichiometry as the ground state but a different crystal structure--enable many critical technologies. This work describes the development of a stabilization approach for metastable polymorphs that are difficult to achieve through other stabilization techniques (such as epitaxy or quenching) called stromataxy. Stromataxy is a method based on controlling the precursor structure during the initial stages of material growth to dictate phase formation. To illustrate this approach, we controlled the atomic layering of the precursors of ScFeO3 and stabilized the metastable P63cm phase, under conditions that previously led to the ground-state Ia3¯ bixbyite phase. Ab initio mechanistic calculations highlight the importance of the variable oxidation state of Fe and the layer stability during layer-by-layer growth. The broad applicability of a stromataxy approach was demonstrated by stabilizing this metastable phase on substrates that have previously been shown to stabilize other polymorphs under continuous growth. Stromataxy is shown as a viable option for accessing polymorphs that are close in energy, difficult to differentiate by strain, or that lack a well epitaxially matched substrate.

calculations↗

A phase model approach for thermostatically controlled load demand response

A significant portion of electricity consumed worldwide is used to power thermostatically controlled loads (TCLs) such as air conditioners, refrigerators, and water heaters. Because the short-term timing of operation of such systems is inconsequential as long as their long-run average power consumption is maintained, they are increasingly used in demand response (DR) programs to balance supply and demand on the power grid. Here, we present an ab initio phase model for general TCLs, and use the concept to develop a continuous oscillator model of a TCL and compute its phase response to changes in temperature and applied power. This yields a simple control system model that can be used to evaluate control policies for modulating the power consumption of aggregated loads with parameter heterogeneity and stochastic drift. We demonstrate this concept by comparing simulations of ensembles of heterogeneous loads using the continuous state model and an established hybrid state model. The developed phase model approach is a novel means of evaluating DR provision using TCLs, and is instrumental in estimating the capacity of ancillary services or DR on different time scales. We further propose a novel phase response based open-loop control policy that effectively modulates the aggregate power of a heterogeneous TCL population while maintaining load diversity and minimizing power overshoots. This is demonstrated by low-error tracking of a regulation signal by filtering it into frequency bands and using TCL sub-ensembles with duty cycles in corresponding ranges. As a result, control policies that can maintain a uniform distribution of power consumption by aggregated heterogeneous loads will enable distribution system management (DSM) approaches that maintain stability as well as power quality, and further allow more integration of renewable energy sources.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A Simple AIMD Approach to Derive Atomic Charges for Condensed Phase Simulation of Ionic Liquids

The atomic charges for two ionic liquids (ILs), 1-n-butyl-3-methylimidazolium hexafluorophosphate ([BMIM] [PF6]) and 1-ethyl-3-methylimidazolium hexafluorophosphate ([EMIM][PF6]), were derived from periodic crystal phase calculations with density functional theory (DFT) and plane wave basis sets (denoted as "AIMD-c charge"). For both ILs, the total charge was found to be +/- 0.8 e for the cation and anion, respectively, due to the charge transfer between ions and polarization caused by the environment. These atomic charges were used in a force field developed within the general Amber force field framework. Using this force field, static, dynamic, and thermodynamic properties were computed for the two ILs using molecular dynamics simulation. The results were compared against results obtained using the same Amber force field but four different sets of partial charges, denoted as full charge, scaled charge, AIMD-1 charge, and AIMD-b charge, respectively. The full charge was derived from quantum chemistry calculation of isolated ions in a vacuum and resulted in a total charge of unity on each ion. The scaled charge was obtained by uniformly scaling the full charge by 0.8. AIMD-1 and AIMD-b charges were derived from liquid phase ab initio molecular dynamics simulations. The scaled charges have the same total charge on the ions as the AIMD-c charge but different distributions. It was found that simulation results not only depend on the total charge of each ion, but they are also sensitive to the charge distribution within an ion, especially for dynamic and thermodynamic properties. Overall, for the two ILs under study, the AIMD-c charge was found to predict experimental results better than the other four sets of charges, indicating that fitting charges from crystal phase DFT calculations, instead of extensive sampling of the liquid phase configurations, is a simple and reliable way to derive atomic charges for condensed phase ionic liquid simulations.

Zhang, Y↗

A Python Multiscale Thermochemistry Toolbox (pMuTT) for thermochemical and kinetic parameter estimation

Estimating the thermochemical properties of systems is important in many fields such as material science and catalysis. The Python multiscale thermochemistry toolbox (pMuTT) is a Python software library developed to streamline the conversion of ab-initio data to thermochemical properties using statistical mechanics, to perform thermodynamic analysis, and to create input files for kinetic modeling software. Its open-source implementation in Python leverages existing scientific codes, encourages users to write scripts for their needs, and allows the code to be expanded easily. The core classes developed include a statistical mechanical model in which energy modes can be included or excluded to suit the application, empirical models for rapid thermodynamic property estimation, and a reaction model to calculate kinetic parameters or changes in thermodynamic properties. In addition, pMuTT supports other features, such as Brønsted–Evans–Polanyi (BEP) relationships, coverage effects, and ab-initio phase diagrams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Smaller Is Better: The Case for Lower-Order Iodoplumbate Species Dominating MAPbI 3 /Dimethylformamide Solutions

Here, using complementary experimental measurements and computational predictions of spectroscopic measurements (EXAFS, XANES, and UV–vis), we have determined the identity of the most stable iodoplumbate species in dilute lead halide perovskite precursor solutions. We have determined which species are most likely to be thermodynamically stable compared to others that are unstable or metastable. Condensed phase ab initio models were constructed, and the resulting ensembles were used to directly compare the computed signals to the experimental results of the EXAFS, XANES, and UV–vis spectra of PbI 2 :MAI in DMF. The results of this study suggest that only Pb 2+ , PbI + , and PbI 2 are dominant in the dilute lead perovskite precursor solutions as thermodynamically stable entities. Our interpretation of the relative stability of iodoplumbate species in solution, based on an analysis of EXAFS and XANES spectra, provides critically important new insight into the species most likely to be responsible for crystal nucleation and growth in these materials. This insight will have a significant consequence on the broad scientific community and will necessitate the reinterpretation of peaks in the UV–vis spectra of lead halide perovskite precursor solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Presolvation and Anharmonicity in Aqueous Phase Hydrated Proton Solvation and Transport

Results from condensed phase ab initio molecular dynamics (AIMD) simulations suggest a proton transfer reaction is facilitated by “presolvation” in which the hydronium is transiently solvated by four water molecules, similar to the typical solvation structure of water, by accepting a weak hydrogen bond from the fourth water molecule. A new version 3.2 multistate empirical valence bond (MS-EVB 3.2) model for the hydrated excess proton incorporating this presolvation behavior is therefore developed. The classical MS-EVB simulations show similar structural properties as those of the previous model but with significantly improved diffusive behavior. The inclusion of nuclear quantum effects in the MS-EVB also provides an even better description of the proton diffusion rate. Finally, to quantify the influence of anharmonicity, a second model (aMS-EVB 3.2) is developed using the anharmonic aSPC/Fw water model, which provides similar structural properties but improved spectroscopic responses at high frequencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determining Catalytically Relevant Surfaces through Coverage-Dependent Lattice Gas Models: Carbon Adsorption on Fe(100)

Here, we have quantified the C–C lateral interactions on Fe(100) using a density functional theory (DFT)-parameterized lattice gas cluster expansion (LG CE) model trained using 265 unique configurations spanning a C coverage from 0 to 1 monolayer (ML). Our LG CE model shows high predictive accuracy with a leave-multiple-out cross-validation score of 10.2 and 16.6 meV/site for systems with and without the top two layers of Fe atoms fixed, respectively. Electronic ground-state structures identified from the lattice gas model (including the structures at 0 and 1 monolayers) were further used to generate ab initio phase diagrams under a range of temperatures and pressures. At low temperatures (<400 K), we found that the 1.0 monolayer structure is dominant, whereas at higher temperatures (>500 K), the 0.88 ML structure is most likely to form on the Fe surface. Interestingly, our model identified a c (2 × 2) ordered structure at 1/2 ML, which correlates well with previous DFT studies for carbon adsorption on iron surfaces and matches with the experimentally observed low-energy electron diffraction structure. Overall, the DFT-parameterized energies for the C/Fe system including effects of coverage and configurational space can further help in developing multiscale models for various heterogeneous reactions involving C–C and C–Fe interactions.

08 HYDROGEN↗

Coverage-Dependent Adsorption of Hydrogen on Fe(100): Determining Catalytically Relevant Surface Structures via Lattice Gas Models

Hydrogen adatoms are a critical surface species for several reactions catalyzed by Fe surfaces such as Fischer–Tropsch synthesis, ammonia synthesis, and the hydrodeoxygenation of biomass-derived oxygenates. Parameterizing the energetics for H/Fe in terms of both coverage and configuration space can significantly aid in the development of multiscale models as well as provide atomic level insight into the dominant surface structures present under realistic reaction conditions. Here, we construct a lattice gas model for H/Fe(100), where the lateral interactions are determined from first-principles using density functional theory. Using 950 symmetrically unique H/Fe(100) configurations, we generate a cluster expansion with a predictive accuracy in terms of surface energy of 3.8 meV/site over a coverage range from 0 to 3 monolayers. Ten electronic ground state structures are identified from this thorough scan (including the structures at 0 and 3 monolayers), which were subsequently used to generate ab initio phase diagrams under a range of temperatures and pressures. Under reaction conditions typical of Fischer–Tropsch synthesis, ammonia synthesis, and biomass oxygenate hydrodeoxygenation, we find that the 1.0 monolayer structure is dominant. Furthermore, examination of the total H–H lateral interactions for the H/Fe(100) electronic ground state structures shows that H/Fe(100) can be accurately modeled via a mean-field ideal lattice gas model for coverages less than 1.0 monolayers. Altogether, this work enables the incorporation of H–H lateral interactions on Fe(100) into multiscale models, via either mean-field or site-dependent techniques, and provides atomic insight into the catalytically relevant H/Fe(100) structures for a range of heterogeneous reactions.

09 BIOMASS FUELS↗

A DFT study of chlorine coverage over late transition metals and its implication on 1,2-dichloroethane hydrodechlorination

Atomic chlorine is known to interact strongly with most late transition metal surfaces. This work aims to identify the relevant chlorine coverage under typical 1,2-dichloroethane hydrodechlorination conditions (T = 423–523 K, PHCl = 10-2–101 bar) and its impact on the reaction energetics. Density functional theory calculations (GGA-PW91) were performed to study the adsorption of chlorine up to 1 monolayer over the close-packed facets of 10 late transition metals (Pt, Co, Ni, Cu, Ru, Rh, Pd, Ag, Ir, Au). The ab initio phase diagram of each chlorine/metal system was constructed. The phase diagrams predicted approximately 1/3 ML chlorine coverage on all metals other than Ag and Au, which remain clean surfaces under hydrodechlorination conditions. The presence of surface chlorine was also found to significantly destabilize the adsorption of reaction intermediates, thus shifting the reaction potential energy diagram upwards. Our results emphasize the importance of explicitly including adsorbed chlorine spectators in properly modeling the catalytic surfaces for the 1,2-dichloroethane hydrodechlorination reaction.

Xu, Lang↗

The kinematic convergent-beam electron diffraction method for nanocrystal structure determination

Kinematic convergent-beam electron diffraction KCBED is a technique capable of probing and solving the atomic structure of isolated nanocrystals as small as a few nanometers in diameter. The method was evaluated by solving the structure of a spinel crystal from three-dimensional diffraction data. The charge-flipping algorithm was used for ab initio phasing and SHELX was used for structure refinement. We discuss the relative merits of the KCBED and precession methods for nanocrystallography. © 2009 American Institute of Physics.

36 MATERIALS SCIENCE↗

Benchmarking exchange-correlation functionals for hydrogen at high pressures using quantum Monte Carlo

The ab initio phase diagram of dense hydrogen is very sensitive to errors in the treatment of electronic correlation. Recently, it has been shown that the choice of the density functional has a large effect on the predicted location of both the liquid-liquid phase transition and the solid insulator-to-metal transition in dense hydrogen. To identify the most accurate functional for dense hydrogen applications, we systematically benchmark some of the most commonly used functionals using quantum Monte Carlo. By considering several measures of functional accuracy, we conclude that the van der Waals and hybrid functionals significantly outperform local density approximation and Perdew-Burke-Ernzerhof. We support these conclusions by analyzing the impact of functional choice on structural optimization in the molecular solid, and on the location of the liquid-liquid phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio structure determination of nanocrystals of organic pharmaceutical compounds by electron diffraction at room temperature using a Timepix quantum area direct electron detector

A specialized quantum area detector for electron diffraction studies makes it possible to solve the structure of small organic compound nanocrystals in non-cryo conditions by direct methods. Until recently, structure determination by transmission electron microscopy of beam-sensitive three-dimensional nanocrystals required electron diffraction tomography data collection at liquid-nitrogen temperature, in order to reduce radiation damage. Here it is shown that the novel Timepix detector combines a high dynamic range with a very high signal-to-noise ratio and single-electron sensitivity, enabling ab initio phasing of beam-sensitive organic compounds. Low-dose electron diffraction data (∼0.013 e{sup −} Å{sup −2} s{sup −1}) were collected at room temperature with the rotation method. It was ascertained that the data were of sufficient quality for structure solution using direct methods using software developed for X-ray crystallography (XDS, SHELX) and for electron crystallography (ADT3D/PETS, SIR2014)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multifunctional Catalysts for the Tandem Reactions of Oxygenates

Industrially-relevant catalytic reactions rarely consist of a simple sequence of elementary steps. Moreover, kinetic coupling of multiple reactions on a catalyst surface is highly desired for process intensification and improved energy efficiency for large scale chemical transformations. The shifting landscape of hydrocarbon chemical feedstocks in the US also motivates research on the selective conversion of more complex molecules. One desirable type of catalytic reaction is the reduction of carboxylic acids that are produced from biomass feedstocks to their corresponding alcohols. The proposed research explores the fundamental importance of hydrogen spillover on a multifunctional catalyst for carboxylic acid reduction with H 2 composed of metal particles coupled to metal oxide particles. Recent work has demonstrated the excellent performance of supported tungsten oxide clusters for carboxylic acid reduction, but only after they are promoted with a late transition metal such as palladium. Elucidating the active state of the catalyst and the associated reaction mechanism for acid reduction on that active state are the overall goals of the proposed project and successful completion will enable future design of efficient multifunctional catalysts. The critically important role of the metal promoter is hypothesized to be its ability to dissociate H2 and spillover atomic H to the support. Although hydrogen spillover is a well-recognized phenomenon in catalysis, its role in both catalyst activation and catalytic turnover are still unresolved. The study combined materials synthesis, characterization, reactivity testing, and molecular simulations, to explore the effect of hydrogen chemical potential on the formation of the active catalytic sites and on the steady state catalytic reduction of carboxylic acid. Varying the hydrogen chemical potential through modification of the gas conditions, support composition, and metal loading to modulated the structure and catalytic performance of the reducible metal oxide. Dual function catalysts containing supported Pd and WO x species co-located on a non-reducible carrier (silica) and a reducible carrier (titania) were synthesized and characterized by electron microscopy, temperature-programmed reduction, and chemisorption. Spectroscopic methods such as X-ray absorption and UV-vis were also used to evaluate the catalysts, which were used in the reduction of propionic acid to aldehyde and alcohol. Quantum chemical calculations, including ab initio phase diagrams provided molecular insights into the H spillover phenomenon.

09 BIOMASS FUELS↗

Tailored computational approaches to interrogate heavy element chemistry and structure in condensed phase

In this chapter we are presenting a brief review of the challenges encountered in the study of 4f and 5f block elements in the condensed phase. Their recovery, use in molten salt reactors and other interesting applications necessitate the use of molecular dynamics and large-scale models that take into account both the electronic structure and relativistic corrections. Sampling the multitude of electronic and atomic configurational states is at the heart of reliable predictions of structure, reactivity, dynamics and transport of heavy metals in complex environments. We present three examples that combine lanthanide elements with large scale models: i) our recent developments of a versatile adaptive learning method that enables global optimization in high dimensional spaces, ii) results of computed pKa values of lanthanide aqua complexes, and iii) structure and computed EXAFS of heavy elements in molten salts. The latter two employ our recently-optimized lanthanide pseudo-potentials and companion basis sets for condensed phase ab initio molecular dynamics.

Nguyen, Manh Thuong↗

Ab initio investigation of phase stability of Y2Ti2O7 and Y2Zr2O7 under high pressure

The phase stabilities of Y2Ti2O7 and Y2Zr2O7 under high pressure were investigated by ab initio methods. Pyrochlore-structured Y2Ti2O7 and defect-fluorite Y2Zr2O7 exhibit different responses to high pressure. Both the defect-fluorite and defect-cotunnite structures are energetically more stable at high pressure in Y2Ti2O7, but comparison with experimental results suggest that only the transformation to the defect-fluorite structure is kinetically favored. For Y2Zr2O7, the defect-fluorite phase should undergo a structural transformation to the defect-cotunnite state under high pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Automatic Prediction of Surface Phase Diagrams Using Ab Initio Grand Canonical Monte Carlo

The properties of a material are often strongly influenced by its surfaces. Depending on the nature of the chemical bonding in a material, its surface can undergo a variety of stabilizing reconstructions that dramatically alter the chemical reactivity, light absorption, and electronic band offsets. For decades, ab initio thermodynamics has been the method of choice for computationally determining the surface phase diagram of a material under different conditions. The surfaces considered for these studies, however, are often human-selected and too few in number, leading both to insufficient exploration of all possible surfaces and to biases toward portions of the composition–structure phase space that often do not encompass the most stable surfaces. To overcome these limitations and automate the discovery of realistic surfaces, we combine density functional theory and grand canonical Monte Carlo (GCMC) into “ab initio GCMC.” This paper presents the successful application of ab initio GCMC to the study of oxide overlayers on Ag(111), which, for many years, mystified experts in surface science and catalysis. Specifically, we report that ab initio GCMC is able to reproduce the surface phase diagram of Ag(111) with no preconceived notions about the system. Using nonlinear, random forest regression, we discover that the Ag coordination number with O and the surface O–Ag–O bond angles are good descriptors of the surface energy. Additionally, using the composition–structure evolution histories produced by ab initio GCMC, we deduce a mechanism for the formation of oxide overlayers based on the Ag 3 O 4 pyramid motif that is common to many reconstructions of Ag(111). Lastly, ab initio GCMC is a promising tool for the discovery of realistic surfaces that can then be used to study phenomena on complex surfaces such as heterogeneous catalysis and material growth, enabling reliable and insightful interpretations of experiments.

36 MATERIALS SCIENCE↗