Search NASA⌕ Search

SEARCH · Search NASA

Results for “acetaldehyde”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Reaction chemistry of ethanol oligomerization to distillate-range molecules using low loading Cu/Mg x AlO y catalysts

We study ethanol oligomerization to higher alcohols and other oxygenates with a 0.3 wt. %Cu/Mg 2.9 AlO catalyst. This reaction involves more than 130 products in a complicated reaction network. The selectivity towards diesel fuel precursor compounds (hereafter ‘DFPC’) increased with conversion until reaching a plateau at an ethanol conversion of ~70 %. Alcohol selectivity was found to follow Schultz-Flory distribution at all studied conversions. Larger sized alcohols then are formed mostly by chain-growth mechanisms via surface reactions of adsorbed oligomers with ethanol-based monomers. Higher esters are formed from alcohols and aldehydes in a series reaction mechanism. Moreover, C 6+ ester and C 4+ ketones selectivities increase as conversion increases. We also found that C 4+ alcohols most likely undergo Guerbet coupling with the studied catalyst to form even higher alcohols once, and that the oxygen of these alcohols is active as a nucleophile, resulting in the selective formation of esters if the starting alcohol is branched. Finally, we performed several cofeed studies varying ethanol-to-H 2 inlet partial pressures, and adding acetaldehyde and ethyl acetate as cofeeds to ethanol at different concentrations. Here, we conclude from these experiments that acetaldehyde concentration controls reaction chemistry, with conditions favoring larger concentrations of the molecule promoting both alcohol coupling and ester formation, and conditions leading to lower concentrations of acetaldehyde resulting in higher alcohol selectivity at the expense of esters and higher aldehydes.

10 SYNTHETIC FUELS↗
DOE OSTI2023

The C 2 H 4 O isomers in the oxidation of ethylene

A combined rotational spectroscopy, thermochemistry, and kinetic modeling study explores the mechanism of acetaldehyde (ethanal), vinyl alcohol (ethenol), and ethylene oxide (oxirane) formation in the oxidation of ethylene (ethene). Multiplexed quantitative detection of oxidation intermediates and products exiting a SiO 2 / SiC microreactor at 1700 K is demonstrated with the BrightSpec W-band chirped-pulse Fourier transform millimeter-wave spectrometer. The broadband rotational spectrum contains transitions of formaldehyde (CH 2 O), methoxy (CH 3 O), methanol (CH 3 OH), ketene (CH 2 CO), acetaldehyde (CH 3 CHO), syn-vinyl alcohol (syn- CH 2 CHOH), anti-vinyl alcohol (anti-CH 2 CHOH), oxirane (c-CH 2 OCH 2 ), propyne (CH 3 CCH), and syn-propanal (syn-CH 3 CH 2 CHO). We focus on the three C 2 H 4 O species and deduce their concentration ratio [CH 3 CHO]:[CH 2 CHOH]:[c-CH 2 OCH 2 ] = 1:0.7(2):0.06(2) by comparing the observed line intensities to those simulated with the PGOPHER software. Detailed thermochemistry of the C 2 H 4 O isomers and conformers is provided by Active Thermochemical Tables. The observed excess concentrations of vinyl alcohol and oxirane relative to the more stable acetaldehyde compared to the equilibrium ratio at 1700 K (1:0.087:0.000024), point to direct chemical pathways to these higher energy isomers. The mechanism for the formation of the three C 2 H 4 O isomers is analyzed using a 0-D homogenous reactor kinetics simulation for ethylene oxidation. The ratios of the C 2 H 4 O isomers concentrations predicted by the kinetic model are compared to the experimental values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Modification of Catalytic Properties of Hollandite Manganese Oxide by Ag Intercalation for Oxidative Acetalization of Ethanol to Diethoxyethane

The effect of addition of Ag to the catalytic properties of hollandite manganese oxide (HMO) was investigated for the oxidative acetalization of ethanol to diethoxyethane. Based on analysis with HRTEM, XRD, and EXAFS, Ag introduced onto HMO by deposition/precipitation was found to be present in different forms in the final catalyst depending on the calcination temperature. It could exist as nanoparticles on the outside surface of HMO nanorods for samples calcined at 60 °C, and as Ag atoms intercalated into the tunnels of the HMO structure for samples calcined at 500 °C. NH 3 desorption results showed that intercalation of Ag resulted in stronger Lewis acidic sites on HMO, which DFT computational results suggested to be due to Ag-induced electron redistribution in the HMO framework. Here, the intercalation of Ag atoms also made the HMO more easily reducible by lowering the H 2 reduction temperature from 500 to 200 °C. Consequently, the sample with intercalated Ag was more active for ethanol oxidation to acetaldehyde, achieving nearly 100% conversion of ethanol and acetaldehyde by 360 °C, and acetalization of acetaldehyde with ethanol to produce diethoxyethane selectively, resulting in 93.5% diethoxyethane yield, which was 10% higher than with samples containing Ag nanoparticles on HMO. This study demonstrated a little-studied phenomenon in which a metal alters the catalytic properties of an oxide electronically but not structurally and without direct participation in the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Direct Comparison of the Activity and Selectivity of Rh 1 Cu and Ni 1 Cu Single-Atom Alloy Sites for Ethanol Decomposition

Ethanol is an important source of clean hydrogen, acetaldehyde, acetic acid, acetate esters, and light hydrocarbons. Controlling the divergent reaction pathways to these products requires understanding how different active sites influence the elementary steps involved. Herein, we present a combined surface science, theory, and nanoparticle catalysis study demonstrating how two single-atom dopants (Rh and Ni) in a Cu host can distinctively alter the selectivity of alcohol conversion. Specifically, our model studies reveal that ethanol reacts on Ni 1 Cu single-atom alloys to selectively produce acetaldehyde, whereas methane and CO are also formed on Rh 1 Cu single-atom alloys. Interestingly, these different reactivities are in contrast to the behavior of the pure metals as Ni(111) and Rh(111) surfaces favor methane/CO and surface carbon/CO, respectively. DFT calculations of reaction pathways and simulated product desorption based on microkinetic analyses explain these reactivity differences, demonstrating that C–C cleavage leading to methane formation has a lower barrier on Rh single-atom sites. To test the catalytic relevance of these fundamental results we synthesized and characterized supported Ni 1 Cu and Rh 1 Cu single-atom alloy nanoparticles with dopant:Cu ratios of 1:200. Flow reactor results revealed that both Ni and Rh increased ethanol conversion over Cu and that Ni 1 Cu catalysts were >99.9% selective to acetaldehyde, while Rh 1 Cu also produced 0.6%–2.6% of equimolar methane and CO between 433 and 493 K, demonstrating that C–C bond cleavage is enabled by isolated Rh sites. Furthermore, these catalytic results bridge the pressure and materials gaps, and together, this study provides insights into how different isolated dopant sites promote different catalytic pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic Insights into Nonoxidative Ethanol Dehydrogenation on NiCu Single-Atom Alloys

Ethanol dehydrogenation presents a promising pathway towards the production of acetaldehyde, a valuable building block in chemicals production. Under non-oxidative conditions, the reaction is facilitated by supported Cu nanoparticles which afford reasonable activity and high selectivity. The stability issues associated with Cu nanoparticle sintering can be addressed by the addition of small amounts of Ni, which further boost reactivity while retaining selectivity. Despite the promise of NiCu single-atom alloys for non-oxidative ethanol dehydrogenation, little is known about the role of each component and the pathway of this mechanistically complex process. Herein, kinetic investigations from reactor tests identify C-H bond scission as the rate limiting step, while 1-hydroxyethyl is detected as the intermediate via IR spectroscopy. Temperature program desorption studies are employed to examine the effect of Ni coverage and to demonstrate that Ni atoms activate ethanol selectively at lower temperatures, resulting in higher acetaldehyde yield than pure Cu. Temperature program desorption experiments also reveal the spillover of intermediates from the Ni atom to neighboring Cu sites as a relevant step in the reaction pathway. Density functional theory calculations are used to investigate the 2 reaction energetics and to confirm that C-H bond scission is the initial reaction step, while a clear effect of H 2 partial pressure on the reaction pathway is realized. Further, counter to the expected behavior that all reaction steps take place on the Ni atoms, our degree of rate control analysis reveals that a mechanism involving spillover of the 1-hydroxyethyl intermediate from the Ni atom to the Cu surface, where it will dehydrogenate further, is more likely. Furthermore, our combined kinetic, spectroscopic, and theoretical approach sheds light on this complex reaction mechanism and represents a promising method for the understanding and designing of highly active, selective, and stable single-atom alloys for other multistep catalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The role of AdhE mutations in Thermoanaerobacterium saccharolyticum

ABSTRACT Thermoanaerobacterium saccharolyticum is a thermophilic anaerobic bacterium that natively ferments a variety of hemicellulose substrates to organic acids and alcohols. It has recently been engineered to produce ethanol at high yield and titer; however, it uses a unique metabolic pathway for ethanol production that is poorly characterized. One of the distinctive aspects of this pathway is the presence of acetyl-CoA as an intermediate metabolite. In this organism, acetyl-CoA is converted to ethanol by a bifunctional AdhE enzyme. This enzyme has been a frequent target for mutations, and in many cases, the function of these mutations was unknown. Using a combination of genetic modifications, enzyme assays, and computational analysis, we have developed a better understanding of how mutations in AdhE affect ethanol production in the engineered homoethanologen strain. We identify a set of approximately interchangeable AdhE mutations (G544D, T597K, T597I, and T605I), whose function is to disrupt the activity of the alcohol dehydrogenase (ADH) domain of AdhE. This reduces NADH-linked ADH activity, which dramatically increases ethanol tolerance and changes the overall stoichiometry of acetaldehyde to ethanol conversion. Furthermore, our improved understanding of the function of these AdhE mutations calls into question a proposed feature of AdhE enzymes known as substrate channeling—direct transfer of acetaldehyde between the two domains of the AdhE enzyme. This improved the understanding of the role of AdhE mutations in T. saccharolyticum and provides deeper insights into the function of the unique ethanol production pathway in this organism. IMPORTANCE Many anaerobic bacteria maintain redox equilibrium by producing reduced organic compounds such as ethanol. The final two steps of ethanol production are mediated by a bifunctional enzyme, AdhE, and this enzyme is a frequent target of mutations in strains engineered for increased ethanol production. Paradoxically, these mutations increase ethanol production by eliminating the activity of one domain of the AdhE enzyme (the ADH domain). This provides additional support for a redox-imbalance theory of alcohol tolerance, which challenges the prevailing hypothesis that alcohol tolerance is associated with cell membrane effects.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Isotope effects at the origin of life: Fingerprints of the Strecker synthesis

We report strecker synthesis creates α-amino acids from prebiotically plausible substrates (cyanide, ammonia, and aldehydes) and is widely hypothesized to be a key mechanism in the chemistry that led to life on Earth and on other planets. To better constrain the synthetic environments and precursors of abiotic α-amino acids, and to determine unique signatures of abiogenic amino acids, we measured the molecular-averaged and site-specific carbon and nitrogen isotope effects for the Strecker synthesis of alanine. The reaction steps of the Strecker synthesis can be divided into two groups: an initial series of reversible amination and nitrile-addition reactions (‘equilibration’) and a second series of irreversible hydrolysis reactions (‘hydrolysis’). The equilibration of cyanide, acetaldehyde, and ammonia with the intermediate, α-aminopropionitrile (α-APN), has a measured 55.1‰ equilibrium nitrogen isotope effect between the 15 N-rich amine nitrogen in α-aminopropionitrile and the 15 N-poor ammonia and a 20.0‰ equilibrium carbon isotope effect between the 13 C-poor C-2 site in α-aminopropionitrile and the 13 C-rich carbonyl carbon in acetaldehyde. The first irreversible hydrolysis step is inferred to have an up to 10‰ normal carbon fractionation (i.e., faster for 12 C, slower for 13 C) for the whole molecule, but it also has one or more side reactions that deplete the reactive α-APN reservoir by up to 15‰. The second hydrolysis step has a 15.4‰ normal kinetic isotope effect on the amide (C-1) site of alaninamide, which becomes the carboxyl site of alanine. Other α-amino acids will likely experience similar nitrogen isotope fractionations between ammonia and their amine sites, and similar carbon isotope fractionations between the carbonyl carbon in reactant aldehydes or ketones and the intermediate α-aminonitrile, and between cyanide and the carboxyl site. Therefore, these isotope effects allow us to predict the carbon and nitrogen isotopic contents and intramolecular structures of α-amino acids formed by Strecker synthesis based on their substrates’ isotopic compositions, or to infer the isotopic compositions of substrates from which amino acids formed, for example in the case of the amino-acid-rich carbonaceous chondrites. The site-specific C and N isotopic compositions of amino acids formed by Strecker chemistry contrast with those typical of terrestrial biosynthetic amino acids, so these data also provide a means of discriminating between biogenic and abiogenic α-amino acids.

58 GEOSCIENCES↗
DOE OSTI2021

Isolated Metal Sites in Cu–Zn–Y/Beta for Direct and Selective Butene-Rich C 3+ Olefin Formation from Ethanol

Direct and selective production of C 3+ olefins from bioethanol remains a critical challenge and important for the production of renewable transportation fuels such as aviation biofuels. In this study, we report a Cu–Zn–Y/Beta catalyst for selective ethanol conversion to butene-rich C 3+ olefins (88% selectivity at 100% ethanol conversion, 623 K), where the Cu, Zn, and Y sites are all highly dispersed. The ethanol-to-butene reaction network includes ethanol dehydrogenation, aldol condensation to crotonaldehyde, and hydrogenation to butyraldehyde, followed by further hydrogenation and dehydration reactions to form butenes. Cu sites play a critical role in promoting hydrogenation of the crotonaldehyde C═C bond to form butyraldehyde in the presence of hydrogen, making this a distinctive pathway from crotyl alcohol-based ethanol-to-butadiene reaction. Reaction rate measurements in the presence of ethanol and acetaldehyde (543 K, 12 kPa ethanol, 1.2 kPa acetaldehyde, 101.9 kPa H 2 ) over monometallic Zn/Beta and Y/Beta catalysts indicate that Y sites have higher C–C coupling rates than over Zn sites (initial C–C coupling rate, 6.1 × 10 –3 mol mol Y –1 s –1 vs 1.2 × 10 –3 mol mol Zn –1 s –1 ). Further, Lewis-acidic Y-site densities over Cu–Zn–Y/Beta with varied Y loadings are linearly correlated with the initial C–C coupling rates, suggesting that Lewis-acidic Y sites are the predominant sites that catalyze C–C coupling in Cu–Zn–Y/Beta catalysts. Control experiments show that the dealuminated Beta support is important to form higher density of Lewis-acidic Y sites in comparison with other supports such as silica, or deboronated MWW despite similar atomic dispersion of Y sites and Y–O coordination numbers over these supports, leading to more than 9 times higher C–C coupling rate per mole Y over dealuminated Beta relative to other supports. This study highlights the significance of unique combination of metal sites in contributing to the selective valorization of ethanol to C 3+ olefins, motivating for exploring multifunctional zeolite catalysts, where the presence of multiple sites with varying reactivities and functions allows for controlling the predominant molecular fluxes toward the desired products in complex reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Aldol Condensation and Esterification over Ti-Substituted *BEA Zeolite: Mechanisms and Effects of Pore Hydrophobicity

Aldol condensation and esterification reactions provide paths to upgrade ethanol and acetaldehyde to higher- value molecules useful as fuels or intermediates for the synthesis of polymers. Transition-metal-substituted BEA zeolites (M-BEA) catalyze these reactions; however, the mechanisms for these processes in M-BEA and the effects of incidental or purposefully included silanol groups are not reported. Here, we combine kinetic and spectroscopic measurements obtained during catalytic reactions of acetaldehyde (CH 3 CHO), ethanol (C 2 H 5 OH), and hydrogen (H 2 ) mixtures over a series of Ti-BEA catalysts that possess a known range of silanol group densities to examine the kinetic relevance of intervening steps and the impact of silanol groups on catalytic rates. Across all Ti-BEA, rates for aldol condensation and esterification increase with the pressure of CH 3 CHO; however, C 2 H 5 OH and H 2 O weakly inhibit the rates of these reactions. The substitution of CD 3 CDO for CH 3 CHO decreases aldol condensation rates slightly (~10%) but leads to greater esterification rates (2- to 5-fold). The kinetic isotope effects together with the measured dependence of rates on reactant pressures suggest that aldol condensation and esterification occur on unoccupied Ti sites and involve multiple kinetically relevant steps. CH 3 CHO deprotonates irreversibly, and the kinetically relevant nucleophilic attack of the enolate to CH 3 CHO* (i.e., adsorbed CH 3 CHO on Ti sites) leads to aldol products, while the nucleophilic attack of the enolate to C 2 H 5 OH* gives esters. Selectivities toward aldol condensation increase with the ratio of CH 3 CHO to C 2 H 5 OH pressure and with increases in the silanol density of the as-synthesized Ti-BEA. During catalysis, in situ infrared spectroscopy demonstrates that these silanol groups react with C 2 H 5 OH to form ethoxysilane groups (i.e., SiOC 2 H 5 ) that modify the polarity of the environment near Ti active sites. As initial silanol densities increase, steady-state turnover rates for aldol condensation and esterification increase by factors of 5 and 2, respectively. The changes in rates and selectivities among Ti-BEA catalysts likely reflect changes in excess free energies of transition states for enolization and nucleophilic attack of the enolate to adsorbed coreactants. The differences in excess stability report on the interactions among reactive intermediates at framework Ti atoms and the ethoxysilane and remaining silanol groups present. Furthermore, the in situ modification of these pore environments confers changes in the stability of reactive species in a manner that contradicts intuition when considering the initial state of the catalyst but can be reconciled after accounting for the formation of persistent alkoxy surface moieties in the pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Substitution Reactions in the Pyrolysis of Acetone Revealed through a Modeling, Experiment, Theory Paradigm

The development of high-fidelity mechanisms for chemically reactive systems is a challenging process that requires the compilation of rate descriptions for a large and somewhat ill-defined set of reactions. The present unified combination of modeling, experiment, and theory provides a paradigm for improving such mechanism development efforts. Here we combine broadband rotational spectroscopy with detailed chemical modeling based on rate constants obtained from automated ab initio transition state theory-based master equation calculations and high-level thermochemical parametrizations. Broadband rotational spectroscopy offers quantitative and isomer-specific detection by which branching ratios of polar reaction products may be obtained. Using this technique, we observe and characterize products arising from H atom substitution reactions in the flash pyrolysis of acetone (CH 3 C(O)CH 3 ) at a nominal temperature of 1800 K. The major product observed is ketene (CH 2 CO). Minor products identified include acetaldehyde (CH 3 CHO), propyne (CH 3 CCH), propene (CH 2 CHCH 3 ), and water (HDO). Literature mechanisms for the pyrolysis of acetone do not adequately describe the minor products. The inclusion of a variety of substitution reactions, with rate constants and thermochemistry obtained from automated ab initio kinetics predictions and Active Thermochemical Tables analyses, demonstrates an important role for such processes. Furthermore, the pathway to acetaldehyde is shown to be a direct result of substitution of acetone's methyl group by a free H atom, while propene formation arises from OH substitution in the enol form of acetone by a free H atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Selective Chloride-Mediated Neat Ethanol Oxidation to 1,1-Diethoxyethane via an Electrochemically Generated Ethyl Hypochlorite Intermediate

Selective primary alcohol oxidation to form aldehydes products without overoxidation to carboxylic acids remains a key chemistry challenge. Using simple alkylammonium chloride as the electrolyte with a glassy carbon working electrode in neat ethanol solvent, 1,1-diethoxyethane (DEE) was prepared with >95% faradaic efficiency (FE). DEE serves as a storage platform protecting acetaldehyde from overoxidation and volatilization. UV–vis spectroscopy shows that the reaction proceeds through an ethyl hypochlorite intermediate as the sole chloride oxidation product, and that this intermediate decomposes unimolecularly (rate constant k = (6.896 ± 0.516) × 10 –4 s –1 ) to form HCl catalyst and acetaldehyde, which undergoes rapid nucleophilic attack by ethanol solvent to form the DEE product. As a result, this indirect oxidation mechanism enables ethanol oxidation at much less positive potentials due to the fast kinetics for chloride anion oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mechanistic and Electronic Insights into a Working NiAu Single-Atom Alloy Ethanol Dehydrogenation Catalyst

Elucidation of reaction mechanisms and the geometric and electronic structure of the active sites themselves is a challenging, yet essential task in the design of new heterogeneous catalysts. Such investigations are best implemented via a multi-pronged approach that comprises ambient pressure catalysis, surface science, and theory. Herein, we employ this strategy to understand the workings of NiAu single-atom alloy (SAA) catalysts for the selective non-oxidative dehydrogenation of ethanol to acetaldehyde and hydrogen. The atomic dispersion of Ni is paramount for selective ethanol to acetaldehyde conversion, and we show that even the presence of small Ni ensembles in the Au surface results in the formation of undesirable byproducts via C-C scission. Spectroscopic, kinetic, and theoretical investigations of the reaction mechanism reveal that both C-H and O-H bond cleavage steps are kinetically relevant and single Ni atoms are confirmed as the active sites. X-ray absorption spectroscopy studies allow us to follow the charge of the Ni atoms in the Au host before, under, and after a reaction cycle. Specifically, in the pristine state the Ni atoms carry a partial positive charge which increases upon coordination to the electronegative oxygen in ethanol and decreases upon desorption. Furthermore, this type of oxidation state cycling during reaction is similar to the behavior of single-site homogenous catalysts. Given the unique electronic structure of many single-site catalysts, such a combined approach in which the atomic-scale catalyst structure and charge state of the single atom dopant can be monitored as a function of its reactive environment is a key step towards developing structure function relationships that inform the design of new catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Spatially Aligned Binary Single-Site Catalyst on Defective SiO 2 for Cascading Reactions

Capitalizing on the success of single-atom catalysts (SACs), dual-atom catalysts (DACs) have emerged as a new frontier in heterogeneous catalysis. However, most SACs and DACs studies seek to uniformly distribute the catalytic sites on the support material, which can hinder their effectiveness in intricate multistep cascading reactions. Particularly, it is a grand challenge to precisely control the spatial distribution of two different single sites forming binary sites so that reactants and intermediates contact the catalytic sites in the exact sequence required by the reaction steps. Here, in this work, we report a new type of binary single-site catalyst, Cu 1 –Zr 1 @SiO 2 , with Cu 1 and Zr 1 sites spatially aligned with the reaction sequence of the cascade reactions. The catalyst is synthesized by a modified reverse microemulsion approach, with single Cu sites anchored by nonbridging oxygen hole centers, which were induced by doping single Zr sites into SiO 2 . Low-energy ion scattering spectroscopy (LEIS) reveals that the outermost surface of the catalyst contains only Cu single sites, while the Zr sites are dispersed in the bulk. The catalytic performance is demonstrated in ethanol conversion to butenes, a model cascade reaction which includes ethanol dehydrogenation and aldol condensation steps. The precisely spatially controlled binary sites enable ethanol to first undergo dehydrogenation to acetaldehyde on Cu sites, followed by aldol condensation of acetaldehyde on Zr sites. As a result, C 3+ olefins selectivity as high as 77.0% (56.0% selectivity of butenes) is achieved by suppressing ethylene formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Thermodynamically leveraged solventless aerobic deconstruction of polyethylene-terephthalate plastics over a single-site molybdenum-dioxo catalyst

Here, we describe the solventless catalytic deconstruction of polyethylene-terephthalate (PET) under an aerobic atmosphere, mediated by an earth-abundant, low-cost activated carbon (AC)-supported single-site molybdenum-dioxo catalyst (AC/MoO 2 ). Catalytic amounts of AC/MoO 2 selectively convert waste PET into its monomer, terephthalic acid (TPA), within 4 h at 265 °C with yields as high as 94% under 1 atm air. Pure crystalline TPA product sublimes from the reaction hot zone, crystallizing on the reactor cold zone, thus avoiding the need for separation and purification steps. This process does not employ any hazardous/toxic reducing agents or solvents, and the catalyst can be recycled multiple times without loss of activity, rendering this process highly atom-efficient. According to computational and experimental mechanistic studies, the AC/MoO 2 catalyst mediates a thermoneutral metal-catalyzed β-scission step, followed by an exothermic step that converts the vinyl benzoate intermediate to TPA and acetaldehyde using trace amounts of moisture in the air. The formation of gaseous acetaldehyde makes the isolation of TPA from the reaction mixture facile and industrially favorable, especially since solvents are unnecessary. The present methodology is also extended to the deconstruction of other frequently used polyester plastics, polybutylene terephthalate (PBT), polyethylene naphthalate (PEN), and polyethylene furanoate (PEF), and operates equally well with post-consumer waste products. Notably, this process is also compatible with plastic mixtures of polyesters with polyolefins, polyamides, and polycarbonates, leading to the selective conversion of each polyester to the corresponding monomer, leaving the residual polymer unchanged and polyester-free.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Enthalpies of formation for Criegee intermediates: A correlation energy convergence study

Criegee intermediates, formed from the ozonolysis of alkenes, are known to have a role in atmospheric chemistry, including the modulation of the oxidizing capacity of the troposphere. Although studies have been conducted since their discovery, the synthesis of these species in the laboratory has ushered in a new wave of investigations of these structures, both theoretically and experimentally. In some of these theoretical studies, high-order corrections for correlation energy are included to account for the mid multi-reference character found in these systems. Many of these studies include a focus on kinetics; therefore, the calculated energies should be accurate (<1 kcal/mol in error). In this research, we compute the enthalpies of formation for a small set of Criegee intermediates, including higher-order coupled cluster corrections for correlation energy up to coupled cluster with perturbative quintuple excitations. The enthalpies of formation for formaldehyde oxide, anti-acetaldehyde oxide, syn-acetaldehyde oxide, and acetone oxide are presented at 0 K as 26.5, 15.6, 12.2, and 0.1 kcal mol−1, respectively. Additionally, we do not recommend the coupled cluster with perturbative quadruple excitations [CCSDT(Q)] energy correction, as it is approximately twice as large as that of the coupled cluster with full quadruple excitations (CCSDTQ). Half of the CCSDT(Q) energy correction may be included as a reliable, cost-effective estimation of CCSDTQ energies for Criegee intermediates.

Chemistry↗
DOE OSTI2020

A bifunctional salvage pathway for two distinct S-adenosylmethionine by-products that is widespread in bacteria, including pathogenic Escherichia coli

S-adenosyl-L-methionine (SAM) is a necessary co-substrate for numerous essential enzymatic reactions including protein and nucleotide methylations, secondary metabolite synthesis, and radical-mediated processes. Radical SAM enzymes produce 5’-deoxyadenosine, and SAM-dependent enzymes for polyamine, neurotransmitter, and quorum sensing compound synthesis produce 5’-methylthioadenosine as byproducts. Both are inhibitory and must be addressed by all cells. This work establishes a bifunctional oxygen-independent salvage pathway for 5’-deoxyadenosine and 5’-methylthioadenosine in both Rhodospirillum rubrum and Extraintestinal Pathogenic Escherichia coli. Homologous genes for this pathway are widespread in bacteria, notably pathogenic strains within several families. A phosphorylase (Rhodospirillum rubrum) or separate nucleoside and kinase (Escherichia coli) followed by an isomerase and aldolase sequentially function to salvage these two wasteful and inhibitory compounds into adenine, dihydroxyacetone phosphate and acetaldehyde or (2-methylthio)acetaldehyde during both aerobic and anaerobic growth. Both SAM byproducts are metabolized with equal affinity during aerobic and anaerobic growth conditions, suggesting that the dual-purpose salvage pathway plays a central role in numerous environments, notably the human body during infection. Finally, our newly discovered bifunctional oxygen-independent pathway, widespread in bacteria, salvages at least two byproducts of SAM-dependent enzymes for carbon and sulfur salvage, contributing to cell growth.

09 BIOMASS FUELS↗
DOE OSTI2024

Photoinitiated Reactions of Molecules and Radicals in Molecular Beams

The UV photochemistry of organic molecules is a fundamental process that governs reactions in the atmosphere, synthetic chemistry, processing of organic aerosols, and biological damage in living tissues. In many organic molecules, the ensuing evolution involves pathways that are in competition, giving rise to different products, isomerization, coupling to other electronic states, and secondary reactive collisions. Because photodissociation is usually fast (picoseconds to microseconds), these processes are far from equilibrium and are controlled by kinetic competition and dynamical forces. The work accomplished was focused primarily on the photochemistry of alpha-keto carboxylic acids, a group of acids produced from natural sources, which are implicated in aerosol formation and biological processes. In the atmosphere, they are destroyed mainly by solar radiation. Studying their photochemistry has been surprisingly difficult because of the complexity of their excited electronic states, and the effect of collisions and secondary reactions. The second project investigated the lifetime of excited electronic states of pyrazine and picoline and had both experimental and theoretical aspects. The work focused on a model molecule, pyruvic acid (PA), because it was hypothesized that it should be a good source of the unstable carbene, methylhydroxycarbene (MHC). PA has an internal hydrogen bond that controls the evolution of its decomposition. The decomposition was studied following excitation to two of its lowest excited states reached by laser irradiation at 351 and 193 nm. The photodissociation dynamics in the absence and presence of collisions was monitored and compared. Understanding the UV photochemistry requires the use of complementary experimental approaches. Two methods were enlisted, which together generated a comprehensive and detailed set of results: (i) The time-sliced velocity map imaging (SVMI) instrument at USC was exploited to determine kinetic energy release of fragments, fast dissociation timescales, and internal state distributions of fragments for which Resonance Enhanced Multiphoton Ionization (REMPI) schemes exist; and (ii) The multiplexed photoionization mass spectrometer (MPIMS) setup developed at the Sandia Combustion Research Facility was used for product discovery, achieved by exploiting tunable narrowband VUV radiation at the Advanced Light Source (ALS), and to follow in real time their subsequent unimolecular and bimolecular reactions. The experimental conditions ranged from collisionless molecular beams to study nascent products to flow reactors of variable pressures to study subsequent bimolecular reactions of the products. The goals stated above were successfully accomplished. By exciting PA to its lowest excited state, MHC was identified as the only primary product and its isomerization to vinylalcohol and acetaldehyde was directly observed in real time. Moreover, we reported the first bimolecular reaction of MHC, which was with acetaldehyde, and identified its reaction product. This paves the way for the study of other reactions of this important carbene intermediate. When excitation was carried out at 193 nm, which imparted much higher energy to PA, many more products were directly observed in real time, some deriving from three-body dissociation. Quantitative branching ratios and secondary reactions of radical products were also determined and analyzed. The studies of pyrazine and picoline focused on the second excited state of these molecules and showed (via ionization studies) that their excited states were very short lived (<100 fs) because of efficient couplings to lower electronic states via vibronic coupling. Theoretical work on modeling the absorption spectrum and decay mechanisms of the excited states are in progress in collaboration with theoreticians.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗