Search NASA⌕ Search

SEARCH · Search NASA

Results for “active material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Redox-flow batteries employing oligomeric organic active materials and size-selective microporous polymer membranes

Intermittent energy sources, including solar and wind, require scalable, low-cost, multi-hour energy storage solutions to be effectively incorporated into the grid. Redox-flow batteries offer a solution, but suffer from rapid capacity fade and low Coulombic efficiency due to the high permeability of redox-active species across the battery's membrane. Here we show that active-species crossover can be arrested by scaling the membrane's pore size to molecular dimensions and in turn increasing the size of the active material to be above the membrane's pore-size exclusion limit. When oligomeric redox-active organic molecules were paired with microporous polymer membranes, the rate of active-material crossover was either completely blocked or slowed more than 9,000-fold compared to traditional separators at minimal cost to ionic conductivity. In the case of the latter, this corresponds to an absolute rate of ROM crossover of less than 3 μmol cm−2 day−1 (for a 1.0 M concentration gradient), which exceeds performance targets recently set forth by the battery industry. This strategy was generalizable to both high and low-potential ROMs in a variety of electrolytes, highlighting the importance of macromolecular design in implementing next-generation redox-flow batteries.

Helms, Brett A.↗
DOE OSTI2026

Endpoint Slippage Analysis in the Presence of Impedance Rise and Loss of Active Material

Endpoint slippage analysis can be used to quantify the reduction and oxidation side-reactions occurring in rechargeable batteries. Application of this technique often disregards the interference of additional aging modes, such as impedance rise and loss of active material (LAM). Here, we show that these modes can themselves induce slippage of endpoints, making the direct determination of parasitic reactions more difficult. We provide equations that describe the slippages caused by LAM and impedance rise. We show that these equations can, in principle, account for the contribution of these additional modes to endpoint slippage, enabling “correction” of testing data to quantify the side-reactions of interest. However, the challenge with this approach is that it requires information about the average Li+ content of disconnected active material domains, which is, in many cases, unknowable. The present work explores mathematical connections between measurable quantities (such as capacity fade and endpoint slippages) and the extent of LAM or impedance rise endured by the cell, and discuss how the tracking of endpoints can better serve battery diagnostics.

Rodrigues, Marco-Tulio F. [Argonne National Labora↗
NASA NTRS2002

Enhancement of Buckling Load with the Use of Active Materials

In this paper, active buckling control of a beam using piezoelectric materials is investigated. Under small deformation, mathematical models are developed to describe the behavior of the beams subjected to an axial compressive load with geometric imperfections and load eccentricities under piezoelectric force. Two types of supports, simply supported and clamped, of the beam with a partially bonded piezoelectric actuator are used to illustrate the concept. For the beam with load eccentricities and initial geometric imperfections, the load- carrying capacity can be significantly enhanced by counteracting moments from the piezoelectric actuator. For the single piezoelectric actuator, using static feedback closed-loop control, the first buckling load can be eliminated. In the case of initially straight beams, analytical solutions of the enhanced first critical buckling load due to the increase of bending stiffness by piezoelectric actuators are derived based on linearized buckling analysis.

Yuan, F. G.↗
DOE OSTI2020

Electrochemical-assisted leaching of active materials from lithium ion batteries

The development of a circular economy for lithium-ion batteries (LIB) is essential to realize decarbonization and an electrified energy market. However, the current commercial operations that recover valuable constituents from LIBs require significant energy and reagents, which create toxic emissions and additional waste. We report an electrochemical-based method for leaching valuable metals from the active materials of mixed shredded LIBs. In this process, the use electrons, as green reagent, allows the use and regeneration of Fe 2+ in low concentrations as substitute for hydrogen peroxide as a reducing agent. Leaching in a membrane separated two-compartment electrochemical cell contributes to decrease the acid requirements as H+ can be generated electrochemically. With this design, leaching efficiencies over 96% for the active metals (Li, Co, Mn, and Ni) were demonstrated at pulp densities up to 240 g/L. Copper present in the active material is electrowon and recovered separately. Preliminary cost analyses demonstrate ca. 80% reduction in energy and chemical costs as compared to traditional hydrometallurgical routes.

25 ENERGY STORAGE↗
NASA NTRS1966

Hot-wire detector for chemically active materials used in gas chromatography

Hot-filament detector analyzes chemically active materials used in gas chromatography. The detector reacts chemically with the effluent vapors in the gas chromatographic apparatus to change the electrical resistance of the filament as a function of the affluent composition. Due to the changes produced by chemical action on the filament, the system is often calibrated.

Source record↗
DOE OSTI2021

Self-discharge of magnesium–sulfur batteries leads to active material loss and poor shelf life

Due to its high theoretical energy density and relative abundancy of active materials, the magnesium–sulfur battery has attracted research attention in recent years. A closely related system, the lithium-sulfur battery, can suffer from serious self-discharge behavior. Until now, the self-discharge of Mg–S has been rarely addressed. Herein, we demonstrate for a wide variety of Mg–S electrolytes and conditions that Mg–S batteries also suffer from serious self-discharge. For a common Mg–S electrolyte, we identify a multi-step self-discharge pathway. Covalent S8 diffuses to the metal Mg anode and is converted to ionic Mg polysulfide in a non-faradaic reaction. Mg polysulfides in solution are found to be meta-stable, continuing to react and precipitate as solid magnesium polysulfide species during both storage and active use. Mg–S electrolytes from the early, middle, and state-of-the-art stages of the Mg–S literature are all found to enable the self-discharge. The self-discharge behavior is found to decrease first cycle discharge capacity by at least 32%, and in some cases up to 96%, indicating this is a phenomenon of the Mg–S chemistry that deserves focused attention.

25 ENERGY STORAGE↗
DOE OSTI2023

Feasibility of Isotopically Tailored Low Activation Materials

Materials employed in future fusion reactors and advanced fission reactors are susceptible to activation and transmutation due to fast neutron flux, which drives the need for Low Activation Materials for survivability, maintenance, and long-term disposal considerations. This paper investigates the feasibility of using ORNL’s planned enrichment technologies to produce isotopically enriched or depleted materials for use in future reactor construction. We focus on identifying isotopes of interest and performing estimates of the required scale of enrichment to impact future design and operation.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Effect of rice husk ash-derived activator on the structural build-up of alkali activated materials

Highlights: • Filtered and unfiltered sodium silicate solutions were synthesised from RHA. • The dissolution efficiency of RHA in NaOH solution was 76.3%. • RHA-derived activator showed a structural build-up comparable to the commercial activator in AAM pastes. • The undissolved residues in the unfiltered RHA-derived activator increased the yield stress. • Comparable compressive strength and early age gel formation were observed from both commercial and RHA-derived solutions. Waste-derived sodium silicates (SSs) were synthesised from rice husk ash (RHA) to produce alkali activated materials (AAMs) using fly ash and slag as precursors. The effects of these SSs on the structural build-up were investigated by monitoring the evolution of the viscoelasticity, ultrasonic pulse waves, setting time, and infrared spectra. Two types of RHA derived SSs (filtered SS and unfiltered SS) were prepared to investigate the effect of the undissolved residue on the hardening process. The derived SS contained a large portion of monomer silicate species. The results showed that the structural build-up mechanism was comparable between the AAMs activated by the filtered SS and a commercial SS. The unfiltered SS increased the yield stress of the paste by up to 10 times. However, the residues in the unfiltered SS had insignificant impacts on the gel formation and compressive strength when using identical SiO{sub 2}/Na{sub 2}O and Na{sub 2}O/binder ratios in the mix design.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electrodes with silicon oxide active materials for lithium ion cells achieving high capacity, high energy density and long cycle life performance

Improved negative electrodes can comprise a silicon based active material blended with graphite to provide more stable cycling at high energy densities. In some embodiments, the negative electrodes comprise a blend of polyimide binder mixed with a more elastic polymer binder with a nanoscale carbon conductive additive. The silicon-based blended graphite negative electrodes can be matched with positive electrodes comprising nickel rich lithium nickel manganese cobalt oxides to form high energy density cells with good cycling properties.

Venkatachalam, Subramanian↗
DOE OSTI2023

Electrodes with silicon oxide active materials for lithium ion cells achieving high capacity, high energy density and long cycle life performance

Improved negative electrodes can comprise a silicon based active material blended with graphite to provide more stable cycling at high energy densities. In some embodiments, the negative electrodes comprise a blend of polyimide binder mixed with a more elastic polymer binder with a nanoscale carbon conductive additive. The silicon-based blended graphite negative electrodes can be matched with positive electrodes comprising nickel rich lithium nickel manganese cobalt oxides to form high energy density cells with good cycling properties.

Venkatachalam, Subramanian↗
NASA NTRS1998

Effects of Cycling Conditions of Active Material From Discharged Ni Positive Plates Studied by Inelastic Neutron Scattering Spectroscopy

The objectives of this presentation are: identify atomic-level signatures of electrochemical activity of the active material on the Ni positive plates of Ni-H2 batteries, relate finding to cycling conditions and histories, and develop INS spectroscopy as a non-destructive testing technique for the evaluation of Ni-positive plates of Ni-H2 batteries.

Eckert, Juergen↗
DOE OSTI2024

Exploiting universal nonlocal dispersion in optically active materials for spectro-polarimetric computational imaging

Recent years have seen significant advancements in exploring novel light-matter interactions such as hyperbolic dispersion within natural crystals. However, current studies have predominantly concentrated on local optical response of materials characterized by a dielectric tensor without spatial dispersion. Here, we investigate the nonlocal response in optically-active crystals with screw symmetries, revealing their lossless, super-dispersive properties compared to traditional optical response functions. We leverage this universal nonlocal dispersion, i.e. the dispersion of optical rotatory power, to explore a novel spectral de-multiplexing scheme compared to conventional gratings, prisms and metasurfaces. We design and demonstrate an ‘Nonlocal-Cam’ - a camera that exploits nonlocal dispersion through sampling of polarized spectral states and the application of computational spectral reconstruction algorithms. The Nonlocal-Cam captures information in both laboratory and outdoor field experiments which is unavailable to traditional intensity cameras - the spectral texture of polarization. Merging the fields of nonlocal electrodynamics and computational imaging, our work paves the way for exploiting nonlocal optics of optically active materials in a variety of applications, from biological microscopy to physics-driven machine vision and remote sensing.

Wang, Xueji [Purdue Univ., West Lafayette, IN (Uni↗
DOE OSTI2024

Exploring the potential and impact of single-crystal active materials on dry-processed electrodes for high-performance lithium-ion batteries

Roll-to-roll powder-to-film dry processing (DP) and single-crystal (SC) active materials (AMs) with many advantages are two hot topics of lithium-ion batteries (LIBs). However, DP of SC AMs for LIBs is rarely reported. Consequently, the impact of SC AMs on dry-processed LIBs is not well understood. Herein, for the first time, via a set of experimental and theoretical studies of the conventional polycrystalline-AM- and SC-AM-based DPed electrodes (DPEs), this work not only reports a high-performance dry SC-AM cathode for LIB manufacturing, but also establishes some fundamental understanding of SC-based dry-processed electrodes, including their morphology, structure, mechanical strength, electronic conductivity and LIB electrochemical behavior. Further, the results suggest that DP of SC AMs is promising, which can dramatically improve the electrochemical kinetics at electrode level and particle level. Specifically, for the rate capability and long-term cyclability in full cells, SC DPEs exhibit a discharge specific capacity of 152.1 mAh g -1 at 1C and a capacity retention rate of 79.9 % at C/3 over 500 cycles, which are superior to those of PC DPEs (135.6 mAh g -1 and 68.3 %) at the same conditions and are further confirmed by the simulation data from the theoretical modelling study. Therefore, this comprehensive work marks a significant milestone for DP strategy and SC AMs, enlightening future research and development of LIB manufacturing.

25 ENERGY STORAGE↗
DOE OSTI2023

Electrochemical direct air capture of CO 2 using neutral red as reversible redox-active material

Direct air capture of carbon dioxide is a viable option for the mitigation of CO 2 emissions and their impact on global climate change. Conventional processes for carbon capture from ambient air require 230 to 800 kJ thermal per mole of CO 2 , which accounts for most of the total cost of capture. Here, we demonstrate electrochemical direct air capture using neutral red as a redox-active material in an aqueous solution enabled by the inclusion of nicotinamide as a hydrotropic solubilizing agent. The electrochemical system demonstrates a high electron utilization of 0.71 in a continuous flow cell with an estimated minimum work of 35 kJ e per mole of CO 2 from 15% CO 2 . Further exploration using ambient air (410 ppm CO 2 in the presence of 20% oxygen) as a feed gas shows electron utilization of 0.38 in a continuous flow cell to provide an estimated minimum work of 65 kJ e per mole of CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effects of Coating on the Electrochemical Performance of a Nickel-Rich Cathode Active Material

Due to their safety and high power density, one of the most promising types of all-solid-state lithium batteries is the one made with the argyrodite solid electrolyte (ASE). Although substantial efforts have been made toward the commercialization of this battery, it is still challenged by some technical issues. One of these issues is to prevent the side reactions at the interface of the ASE and the cathode active material (CAM). A solution to address this issue is to coat the CAM particles with a material that is compatible with both ASE and CAM. Prior studies show that the lithium niobate, LiNbO 3 , (LNO) is a promising material for coating CAM particles to reduce the interfacial side reactions. However, no systematic study is available in the literature to show the effect of coating LNO on CAM performance. This paper aims to quantify the effect of LNO coating on the electrochemical performance of a nickel-rich CAM. The electrochemical performance parameters that are studied are the capacity, cycling performance, and rate performance of the coated-CAM; and the effectiveness of the coating to prevent the side reactions at the ASE and CAM interface is out of the scope of this study. To eliminate the effect of side reactions at the ASE and CAM interface, we conduct all tests in the organic liquid electrolyte (OLE) cells to solely present the effect of coating on the CAM performance. For this purpose, 0.5 wt.% and 1 wt.% LNO are used to coat the LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC-60) CAM through two synthesizing methods. Consequently, the effects of the synthesizing method and the coating weight percentage on the NMC-60 performance are presented.

10 SYNTHETIC FUELS↗