Search NASA⌕ Search

SEARCH · Search NASA

Results for “active source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Active–Source Seismic Tomography at the Brady Geothermal Field, Nevada, with Dense Nodal and Fiber–Optic Seismic Arrays

We deployed a dense seismic array to image the shallow structure in the injection area of the Brady Hot Springs geothermal power plant in western Nevada. The array was composed of 238 three-component, 5 Hz nodal instruments, 8700 m of distributed acoustic sensing (DAS) fiber-optic cable (FOC) installed horizontally in surface trenches, and 400 m of FOC installed vertically in a borehole. The geophone array had about 60 m instrument spacing in the target zone, whereas DAS channel separations were about 1 m with an averaging (gauge) length of 10 m. The acquisition systems provided 15 days of continuous records, including active-source and ambient noise signals. A large vibroseis truck was operated at 196 locations, exciting a swept-frequency signal from 5 to 80 Hz over 20 s using three vibration modes (vertical, longitudinal, and transverse), with three sweeps per mode at each site. Sweeps were repeated up to four times at each site during four different stages of power plant operation: normal operation, shutdown, high and oscillatory injection and production, and normal operation. After removal of the sweep signal from the raw data, the first P-wave arrivals were automatically picked using a combination of methods. Here, the travel times were then used to invert for the 3D P-wave velocity structure. Models with 100 m horizontal and 20–50 m vertical node spacing were obtained, covering an area 2000 m by 1300 m, with acceptable resolution extending to about 250 m below surface. The travel-time data were fit to a root mean square (rms) misfit of 31 ms, close to our estimated picking uncertainty. Lateral boundaries between high and low velocity zones agree relatively well with the location of local faults from previous studies, and low near-surface velocities are associated with faults and fumarole locations. A sharp increase in velocity from < 1500 to > 2000 m/s at approximately 50 m below the ground surface in many parts of the study area may indicate a shallower water table than expected for the region.

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

The effect of local chemical ordering on Frank-Read source activation in a refractory multi-principal element alloy

In this work, we investigate the operation of Frank-Read (FR) sources in a refractory multi-principal element alloy (MPEA). Simulations of discrete dislocation motion in MPEAs is enabled by the development of a phase field dislocation dynamics model that treats the atomic-scale fluctuations in lattice energies across the glide plane, present due to local ordering in the chemical composition within the nominally random MPEA atomic structure. We consider, through simulation, a range of length scales over which ordering occurs, varying from short-range lengths, a few times dislocation core width, to long-range lengths, an order of magnitude longer than the core. Characteristic of this body-centered cubic MPEA, the simulations also include screw/edge character dependence in glide resistance, as informed by atomic scale simulation. The critical stresses to activate the source for the same source size are found to be statistically distributed, as a direct consequence of the underlying variation in lattice energy. Furthermore, analysis of critical state for activating edge and screw FR sources in the MPEA reveals that FR source operation occurs via a two-step mechanism, involving athermal kink-pair formation, unlike the conventional FR source operation in a material with no composition fluctuations. This mechanism lowers the average critical stress required to activate the FR source and causes the statistical dispersion in critical stress to depend on the range of composition ordering. More importantly, it leads to a more severe dependence of source strength on FR source length than predicted by line tension alone.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Polymer etching by atmospheric-pressure plasma jet and surface micro-discharge sources: Activation energy analysis and etching directionality

Treatments of polymer films using either a MHz atmospheric pressure plasma jet (APPJ) or an atmospheric pressure surface micro-discharge (SMD) plasma are investigated. While the typical approach to determine relevant reactive species is to correlate surface effects with gas phase species measurement, this does not capture potential synergistic or other complex effects that may be occurring. Activation energy and directionality of the etching process can characterize what is occurring at the surface for these processes in more detail. The APPJ source shows an apparent activation energy of ~0.18 eV at 8 mm distance and up to ~0.34 eV at 16mmdistance for a temperature range of 20–80 °C tested with thin polymer films. The APPJ source shows directional etching at 8 mm distance with less anisotropy the more distance is increased. The SMD source has an apparent activation energy of ~0.8–0.9 eV at a distance of 3 mm. The SMD also only shows isotropic etching behavior. However the SMD surface chemistry changes significantly to less oxidation with increased temperature while the APPJ source induced modifications remain very similar with temperature change. The lower apparent activation energy of the APPJ induced etching reactions as compared with low pressure work (0.5 eV) and observation of line-of-sight contribution to etching suggests the involvement of a directional species at closer distances facilitating the etching which falls off with increasing distance. The high activation energy of the SMD suggests that species with less capability for etching is responsible compared to the APPJ and low pressure plasma. In conclusion, the high surface oxidation from low temperature SMD treatments shows that the surface is being oxidized but not sufficiently to reach the desorption step of the etching process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Snake River Plain Geothermal Play Fairway Analysis Project Active Source Seismic Data

This archive contains seismic shot field records for 10 profiles located in Camas Prairie, Idaho. The eight numbered .sgy files were acquired using a seismic land streamer system with an accelerated weight drop source and 72 geophones. These 10-Hz geophones were mounted on base plates and dragged behind the seismic source. Shots were acquired every 4 meters along the length of lines 500West, 550 West, 600West, 700West, 800West, 900West, 200South and 200North. The objective was to map stratigraphy and structures related to geothermal fluid flow in the upper few hundred meters. A readme file is included with descriptions of individual files. The lines names refer to to roads which are numbered relative to the distance from the county seat (the town of Fairfield) along the the main highways. For example, 500 West implies that this north-south street crosses the main road 5 miles to the west of town. The included geologic, topographic, and aerial maps show the labeled seismic lines, while the regional map shows only the line geometry and regional faulting.

15 GEOTHERMAL ENERGY↗
DOE OSTI2015

Laser ion source activities at Brookhaven National Laboratory

In Brookhaven National Laboratory (BNL), we have been developing laser ion sources for diverse accelerators. Tabletop Nd:YAG lasers with up to several Joules of energy are mainly used to create ablation plasmas for stable operations. The obtained charge states depend on laser power density and target species. Two types of ion extraction schemes, Direct Plasma Injection Scheme (DPIS) and conventional static extraction, are used depending on application. We optimized and select a suitable laser irradiation condition and a beam extraction scheme to meet the requirement of the following accelerator system. We have demonstrated to accelerate more than 5 x 10 10 of C 6+ ions using the DPIS. We successfully commissioned low charge ion beam provider to the user facilities in BNL. As a result, to achieve higher current, higher charge state and lower emittance, further studies will continue.

43 PARTICLE ACCELERATORS↗
NASA NTRS2014

Speed of CMEs and the Magnetic Non-Potentiality of their Source Active Regions

Most fast coronal mass ejections (CMEs) originate from solar active regions (ARs). Non-potentiality of ARs plausibly determines the speed of CMEs in the outer corona. Several other unexplored parameters might be important as well. To find out the relation between the intial speed of CMEs and the non-potentiality of source ARs, we identified over a hundred of CMEs with source ARs via their co-produced flares. The speed of the CMEs are collected from the SOHO LASCO CME catalog. We have used vector magnetograms obtained with HMI/SDO, to evaluate various magnetic non-potentiality parameters, e.g. magnetic free-energy proxies, twist, shear angle, signed shear angle, net current etc. We have also included several other parameters e.g. total unsigned flux, magnetic area of ARs, area of sunspots, to investigate their correlation, if any, with the initial speeds of CMEs. Our preliminary results show that the ARs with larger non-potentiality and area produce faster CMEs but they can also produce slow ones. The ARs with lesser non-potentiality and area generally produce only slower CMEs.

sunspots↗
NASA NTRS1999

Simultaneous Active Source Control of Blade Row Interaction Generated Discrete Tones

Unsteady blade row interactions in turbomachines generate discrete-frequency tones at blade pass frequency and its harmonics. Specific circumferential acoustic modes are generated. However, only certain of these modes propagate upstream and downstream to the far field, with these the discrete frequency noise received by an observer. This paper is directed at experimentally demonstrating the viability of active noise control utilizing active airfoils to generate propagating spatial modes that interact with and simultaneously cancel the upstream and downstream propagating acoustic modes. This is accomplished by means of fundamental experiments performed in the Purdue Annular Cascade Research Facility configured with 16 rotor blades and 18 stator vanes. At blade pass frequency, only the k(sub 0) = -2 spatial mode propagates. Significant simultaneous noise reductions are achieved for these upstream and downstream propagating spatial modes over a wide range of operating conditions.

Sawyer, Scott↗
DOE OSTI2024

A novel methodology for gamma-ray spectra dataset procurement over varying standoff distances and source activities

The adoption of machine learning approaches for gamma-ray spectroscopy has received considerable attention in the literature. Many studies have investigated the deployment of various algorithm architectures to a specific task. However, little attention has been afforded to the development of the datasets leveraged to train the models. Such training datasets typically span a set of environmental or detector parameters to encompass a problem space of interest to a user. Variations in these measurement parameters will also induce fluctuations in the detector response, including expected pile-up and ground scatter effects. Fundamental to this work is the understanding that 1) the underlying spectral shape varies as the measurement parameters change and 2) the statistical uncertainties associated with two spectra impact their level of similarity. While previous studies attribute some arbitrary discretization to the measurement parameters for the generation of their synthetic training data, this work introduces a principled methodology for efficient spectral-based discretization of a problem space. A signal-to-noise ratio (SNR) respective spectral comparison measure and a Gaussian Process Regression (GPR) model are used to predict the spectral similarity across a range of measurement parameters. This innovative approach effectively showcased its capability by dividing a problem space, ranging from 5 cm to 100 cm standoff distances and 5 μCi–100 μCi of 137 Cs, into three unique combinations of measurement parameters. The findings from this work will aid in creating more robust datasets, which incorporate many possible measurement scenarios, reduce the number of required experimental test set measurements, and possibly enable experimental training data collection for gamma-ray spectroscopy.

data science↗
NASA NTRS1985

Galactic gamma-ray sources, SNOBs, and giant H2 regions

Progress towards understanding the nature of the COS-B galactic gamma-ray sources was made by two recent developments. The developments are: (1) the existence of extensive wide-latitude CO surveys, from the Northern Hemisphere, and from the Southern Hemisphere which give more precise information on molecular cloud population of the Perseus, Sagittarius, and Carina spiral arms; (2) the study of the time variability of gamma-ray sources in gamma-rays but also at other wavelengths, leading to the discovery of four new variable sources in addition to the already known Crab and Vela pulsars. Three classes of gamma-ray sources are found; invariable sources, active sources, and passive sources.

Montmerle, T.↗
DOE OSTI2019

Frio 2 : Raw CASSM Datasets

This submission contains the raw SEG-2 seismic datasets acquired in the CASSM experiment, part of the Frio-2 GCS pilot. The directory also includes the log files generated by the Geode seismograph (geometrics) used during acquisition. All SEG-2 files have a ".dat" suffix and log files have a ".log" suffix. Various supplementary files are also included (see below) including a set of flow and seismic models used in interpretation. The earlyGathers.tar.gz resource includes raw data acquired during system testing and pre-injection periods. All files correspond to the single source continuous active source seismic monitoring (CASSM) dataset described in the following papers. Daley, T.M., Solbau, R.D., Ajo-Franklin, J.B., and Benson, S.M. 2007, “Continuous Active-Source Seismic Monitoring of CO2 Injection in a Brine Aquifer”, Geophysics, Vol. 72, No. 5, p. A57-A61 Daley, T., Ajo-Franklin, J.B., and C. Doughty, 2011, “Constraining the reservoir model of an injected CO2 plume with crosswell CASSM at the Frio-II Brine Pilot”, International Journal of Greenhouse Gas Control (IJGGC), Vol. 5, No. 2, pp. 1022-1030. Zhu, T., Ajo-Franklin, J., and T. Daley, 2017, “Spatio-temporal changes in seismic attenuation caused by injected CO2 at the Frio-II pilot site, Dayton TX, USA”, Journal of Geophysical Research – Solid Earth, Vol. 122, No. 9, pp. 7156-7171. cassmDataRaw.tar : The main tar file containing all of the SEG-2 field records and the Geode log files. Stacking, time sampling (dt), and date information should be in the .log file. Each file corresponds to a single stacked gather for the single source deployed. Data was recorded on a 24 channel downhole hydrophone array. fieldNotes.tar : contains some of the scanned observer logs from the experiments as well as some planning images fieldPhotos.tar : contains a small set of photographs taken during the experiment frio_flow_seismic_models.mat : a matlab structure containing a set of flow and seismic models used in interpreting the CASSM data (see IJGGC paper).

GCS↗
NASA NTRS1987

The central power source in active galaxies

Potential sources for the central power in AGN are examined. The continuum, emission line profiles, and time variability and broad emission line region for AGN are analyzed. The supermassive black hole hypothesis, the supermassive magnetized core model of Kundt (1978), and the model of Stoner and Ptak (1984) in which the supermassive stars maintain a kind of long-term quasi-stability, but accretion is balanced by mass loss and spherical bursts rather than in jets are considered. It is argued that the hypothesis that the supermassive blackholes are the central engines for AGN is based on theoretical principles; however, AGN emission line profiles and variability suggest a spherical geometry for the observed components of these engines. Also the supermassive black hole models do not account for all the AGN observations.

Ptak, Roger↗