SEARCH · Search NASA
Results for “adaptive optics systems”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Adaptive Optics and Transmit System for NASA's Laser Communications Relay Demonstration Project
The Laser Communication Relay Demonstration is NASA’s multi-year demonstration of laser communication to a geosynchronous satellite. We are currently assembling the optical system for the first of the two baseline ground stations. The optical system consists of an adaptive optics system, the transmit system and a camera for target acquisition. The adaptive optics system is responsible for compensating the downlink beam for atmospheric turbulence and coupling it into the modem’s single mode fiber. The adaptive optics system is a woofer/tweeter design, with one deformable mirror correcting for low spatial frequencies with large amplitude and a second deformable mirror correcting for high spatial frequencies with small amplitude. The system uses a Shack-Hartmann wavefront sensor. The transmit system relays four beacon beams and one communication laser to the telescope for propagation to the space terminal. Both the uplink and downlink beams are centered at 1.55 microns. We present an overview of the design of the system as well as performance predictions including time series of coupling efficiency and expected uplink beam quality.
Accuracy requirements of optical linear algebra processors in adaptive optics imaging systems
A ground-based adaptive optics imaging telescope system attempts to improve image quality by detecting and correcting for atmospherically induced wavefront aberrations. The required control computations during each cycle will take a finite amount of time. Longer time delays result in larger values of residual wavefront error variance since the atmosphere continues to change during that time. Thus an optical processor may be well-suited for this task. This paper presents a study of the accuracy requirements in a general optical processor that will make it competitive with, or superior to, a conventional digital computer for the adaptive optics application. An optimization of the adaptive optics correction algorithm with respect to an optical processor's degree of accuracy is also briefly discussed.
Accuracy requirements of optical linear algebra processors in adaptive optics imaging systems
The accuracy requirements of optical processors in adaptive optics systems are determined by estimating the required accuracy in a general optical linear algebra processor (OLAP) that results in a smaller average residual aberration than that achieved with a conventional electronic digital processor with some specific computation speed. Special attention is given to an error analysis of a general OLAP with regard to the residual aberration that is created in an adaptive mirror system by the inaccuracies of the processor, and to the effect of computational speed of an electronic processor on the correction. Results are presented on the ability of an OLAP to compete with a digital processor in various situations.
The OpenSE Cookbook: A Practical, Recipe Based Collection of Patterns, Procedures, and Best Practices for Executable Systems Engineering for the Thirty Meter Telescope
The OpenSE Cookbook is an open-sourced collection of patterns, procedures, and best practices targeted for systems engineers who seek guidance on applying model-based and executable systems engineering (MBSE) using SysML. Its content has emerged from the system level modeling effort on the European Framework Program 6 (FP6) and the Thirty Meter Telescope (TMT). The TMT MBSE approach applied the Executable Systems Engineering Method (ESEM) and the open-source Engineering Environment (OpenMBEE) to specify, analyze, and verify requirements of TMT’s Alignment and Phasing System (APS) and the Narrow Field Infrared Adaptive Optics System (NFIRAOS). In these applications, implicit dependencies are made explicit in a formal model through the use of ESEM, OpenMBEE, and SysML modeling constructs. The value proposition for applying this MBSE approach was to establish precise requirements and fine-grained traceability to system designs, and to verify key requirements beginning early in development. The integration of ESEM and the OpenMBEE tooling infrastructure (providing linked-data and web-operability) is a significant added value for the MBSE approach. The APS is responsible for the overall pre-adaptive optics wavefront quality, using starlight to measure wavefront errors and align the TMT optics. In the formally integrated and executable SysML model, simulations are performed to analyze the impact of changed requirements and verify specified constraints for various operational scenarios. The APS team used several modeling patterns to capture information such as the requirements, the operational scenarios, involved subsystems and their interaction points, the estimated or required time durations, and the mass and power consumption. Adaptive optics systems are designed to sense real-time atmospheric turbulence and correct the telescope’s optical beam to remove its effect. The system model for the adaptive optics operational modes was developed to capture sequence behaviors and operational scenarios to run Monte-Carlo simulations for verifying acquisition time, observing efficiency, and operational behavior requirements. The model is particularly useful for investigating the effect of parallelization, identifying interface issues, and re-ordering sequence acquisition tasks. A former version of the Cookbook (which is now updated to MBSE challenges, goals, and lessons learned) included modeling guidelines and conventions for all system aspects, hierarchy levels, and views, which were developed during for the Active Phasing Experiment (APE), an opto-mechatronical system technology demonstrator for the Extremely Large Telescope (ELT). The Cookbook utilizes the above mentioned system models as real-world case-studies to demonstrate and document the applications of the recipes, providing also instructional examples and addressing the available tooling support. The Cookbook is accompanied by a number of SysML models and aodel libraries which facilitate model authoring and maintenance. The Cookbook covers the different aspects of Systems Engineering such as management of Requirements, Design (behavior and structure), Interfaces, Interdisciplinary Integration, Analysis, Trade Studies, and Technical Resources. This paper presents the background, motivation, architecture, and highlights some key content of the Cookbook. For example, interface management, error budget management, requirements verification, Monte Carlo driven analysis, and timing analysis of operational scenarios. The paper discusses how the capabilities of OpenMBEE contributed significantly to the adoption of executable systems engineering.
Adaptive structures for precision segmented optical systems
An adaptive structures approach for a large segmented optical system with a 20-meter primary reflector made of lightweight hexagonal composite panels is considered. This approach makes it possible to vary the static and dynamic characteristics of a structural system through actuators and sensors integrated within the structure. Topics discussed include quasi-static shape adjustment and active damping augmentation of the primary backup truss structure, deformable panels for long spatial wavelength quasi-static figure correction, and an on-orbit identification system for large segmented optical systems.
Computation of Static Shapes and Voltages for Micromachined Deformable Mirrors with Nonlinear Electostatic Actuators
In modeling micromachined deformable mirrors with electrostatic actuators whose gap spacings are of the same order of magnitude as that of the surface deformations, it is neccessary to use nonlinear models for the actuators. In this paper, we consider micromachined deformable mirrors modeled by a membrane or plate equation with nonlinear electrostatic actuator characteristics.
Overview of LBTI: A Multipurpose Facility for High Spatial Resolution Observations
The Large Binocular Telescope Interferometer (LBTI) is a high spatial resolution instrument developed for coherent imaging and nulling interferometry using the 14.4 m baseline of the 2x8.4 m LBT. The unique telescope design, comprising of the dual apertures on a common elevation-azimuth mount, enables a broad use of observing modes. The full system is comprised of dual adaptive optics systems, a near-infrared phasing camera, a 1-5 micrometer camera (called LMIRCam), and an 8-13 micrometer camera (called NOMIC). The key program for LBTI is the Hunt for Observable Signatures of Terrestrial planetary Systems (HOSTS), a survey using nulling interferometry to constrain the typical brightness from exozodiacal dust around nearby stars. Additional observations focus on the detection and characterization of giant planets in the thermal infrared, high spatial resolution imaging of complex scenes such as Jupiter's moon, Io, planets forming in transition disks, and the structure of active Galactic Nuclei (AGN). Several instrumental upgrades are currently underway to improve and expand the capabilities of LBTI. These include: Improving the performance and limiting magnitude of the parallel adaptive optics systems; quadrupling the field of view of LMIRcam (increasing to 20"x20"); adding an integral field spectrometry mode; and implementing a new algorithm for path length correction that accounts for dispersion due to atmospheric water vapor. We present the current architecture and performance of LBTI, as well as an overview of the upgrades.
Sparse matrix wavefront reconstruction: simulations and experiments
Adaptive optics systems with Shack-Hartmann wavefront sensors require reconstruction of the atmospheric phase error from slope measurements, with every sensor in the array being used in the computation of each actuator command. This fully populated reconstruction matrix can result in a significant computational burden for adaptive optics systems with large numbers of actuators. A method for generating sparse wavefront reconstruction matrices for adaptive optics isproposed. The method exploits the relevance of nearby slope measurements for control of an individual actuator, and relies upon the limited extent of the influence function for a zonal deformable mirror. Relying only on nearby sensor information can significantly reduce the calculation time for wavefront reconstruction. In addition, a hierarchic controller is proposed to recover some of the global wavefront information. The performance of these sparse wavefront reconstruction matrices was evaluated in simulation, and tested on the Palomar Adaptive Optics System. This paper will present some initial results from the simulations and experiments.
Bench top interferometric test bed for LISA
Adaptive optics systems with Shack-Hartmann wavefront sensors require reconstruction of the atmospheric phase error from slope measurements, with every sensor in the array being used in the computation of each actuator command. This fully populated reconstruction matrix can result in a significant computational burden for adaptive optics systems with large numbers of actuators. A method for generating sparse wavefront reconstruction matrices for adaptive optics is proposed. The method exploits the relevance of nearby slope measurements for control of an individual actuator, and relies upon the limited extent of the influence function for a zonal deformable mirror. Relying only on nearby sensor information can significantly reduce the calculation time for wavefront reconstruction. In addition, a hierarchic controller is proposed to recover some of the global wavefront information. The performance of these sparse wavefront reconstruction matrices was evaluated in simulation, and tested on the Palomar Adaptive Optics System. This paper will present some initial results from the simulations and experiments.
Phase Contrast Wavefront Sensing for Adaptive Optics
Most ground-based adaptive optics systems use one of a small number of wavefront sensor technologies, notably (for relatively high-order systems) the Shack-Hartmann sensor, which provides local measurements of the phase slope (first-derivative) at a number of regularly-spaced points across the telescope pupil. The curvature sensor, with response proportional to the second derivative of the phase, is also sometimes used, but has undesirable noise propagation properties during wavefront reconstruction as the number of actuators becomes large. It is interesting to consider the use for astronomical adaptive optics of the "phase contrast" technique, originally developed for microscopy by Zemike to allow convenient viewing of phase objects. In this technique, the wavefront sensor provides a direct measurement of the local value of phase in each sub-aperture of the pupil. This approach has some obvious disadvantages compared to Shack-Hartmann wavefront sensing, but has some less obvious but substantial advantages as well. Here we evaluate the relative merits in a practical ground-based adaptive optics system.
Propagation of high-energy laser beams through the earth's atmosphere II; Proceedings of the Meeting, Los Angeles, CA, Jan. 21-23, 1991
Consideration is given to turbulence at the inner scale, modeling turbulent transport in laser beam propagation, variable wind direction effects on thermal blooming correction, realistic wind effects on turbulence and thermal blooming compensation, wide bandwidth spectral measurements of atmospheric tilt turbulence, remote alignment of adaptive optical systems with far-field optimization, focusing infrared laser beams on targets in space without using adaptive optics, and a simplex optimization method for adaptive optics system alignment. Consideration is also given to ground-to-space multiline propagation at 1.3 micron, a path integral approach to thermal blooming, functional reconstruction predictions of uplink whole beam Strehl ratios in the presence of thermal blooming, and stability analysis of semidiscrete schemes for thermal blooming computation.
Common-Path Wavefront Sensing for Advanced Coronagraphs
Imaging of faint companions around nearby stars is not limited by either intrinsic resolution of a coronagraph/telescope system, nor is it strictly photon limited. Typically, it is both the magnitude and temporal variation of small phase and amplitude errors imparted to the electric field by elements in the optical system which will limit ultimate performance. Adaptive optics systems, particularly those with multiple deformable mirrors, can remove these errors, but they need to be sensed in the final image plane. If the sensing system is before the final image plane, which is typical for most systems, then the non-common path optics between the wavefront sensor and science image plane will lead to un-sensed errors. However, a new generation of high-performance coronagraphs naturally lend themselves to wavefront sensing in the final image plane. These coronagraphs and the wavefront sensing will be discussed, as well as plans for demonstrating this with a high-contrast system on the ground. Such a system will be a key system-level proof for a future space-based coronagraph mission, which will also be discussed.
Small scale adaptive optics experiment systems engineering
Assessment of the current technology relating to the laser power beaming system which in full scale is called the Beam Transmission Optical System (BTOS). Evaluation of system integration efforts are being conducted by the various government agencies and industry. Concepts are being developed for prototypes of adaptive optics for a BTOS.
A Study of Planetary System Formation and Evolution Using a Dual Channel Adaptive Optics Imaging Polarimeter
The award I received from the Graduate Student Research Program in 2001, and the renewal award in 2002, supported the gathering and processing of my thesis data, and the presentation of my scientific results at astronomy conferences. Ultimately, this led to a successful defense of my PhD thesis. In the thesis work, I built, calibrated, and observed with the first dual imaging polarimeter ever used in series with a high order adaptive optics system and on an 8 meter class telescope. The instrument was arguably the most sensitive instrument for the high-contrast detection of the scattered light from circumstellar disks. The success of the instrument has provided the impetus for the construction of several similar simultaneous adaptive optics imaging polarimeters. In the course of the observations, a number of circumstellar disks were resolved for the first time in their scattered light, such as the disk around the classical T-tauri stars, LkCa 15 and LkHa 262. A sample of 24 young, nearby, solar-analog stars were observed with the instrument in search of the scattered light signature from debris disks around these stars. Although none of the stars revealed any obvious scattered light signatures, a meaningful limit was placed on the dust population around these stars. Also, a brown dwarf binary system was found to be a companion to one of the solar-analog stars observed, HD130948. A careful monitoring of the orbit of the binary brown dwarf will result in a dynamical mass determination of the objects, providing a valuable calibration of the physical models explaining brown dwarf evolution.
A Broad-Band Phase-Contrast Wave-Front Sensor
A broadband phase-contrast wave-front sensor has been proposed as a real-time wave-front sensor in an adaptive-optics system. The proposed sensor would offer an alternative to the Shack-Hartmann wave-front sensors now used in high-order adaptive-optics systems of some astronomical telescopes. Broadband sensing gives higher sensitivity than does narrow-band sensing, and it appears that for a given bandwidth, the sensitivity of the proposed phase-contrast sensor could exceed that of a Shack-Hartmann sensor. Relative to a Shack-Hartmann sensor, the proposed sensor may be optically and mechanically simpler. As described below, an important element of the principle of operation of a phase-contrast wave-front sensor is the imposition of a 90deg phase shift between diffracted and undiffracted parts of the same light beam. In the proposed sensor, this phase shift would be obtained by utilizing the intrinsic 90 phase shift between the transmitted and reflected beams in an ideal (thin, symmetric) beam splitter. This phase shift can be characterized as achromatic or broadband because it is 90deg at every wavelength over a broad wavelength range.
A Survey of Massive Planets by Direct Imaging with Advanced Adaptive Optics
The observations are completed. The observing that has been done essentially on the Canada-France-Hawaii Telescope with the PUEO adaptive optics system, is sufficient to identify approximately 10 Jupiter masses objects around the selected targets. A small amount of data was also collected on the Gemini Telescope with the Hokupa'a adaptive optics system. For most of the stars of the sample, about 30mn of exposure time was collected per epoch, with at least 2 epochs. About 15% of the stars of the sample did not meet these requirements, due to observing difficulties listed below: (1) Guide star is too faint for the AO system; (2) The guide star is a close double (about 0.5 to 1 inch separation), which makes it unsuitable for AO guiding; (3) For a few stars, weather and observing constraints could not allow observations.
Adaptive optics
An estimation of the costs and potential resolution and sensitivity benefits of adaptive optics systems is presented. The effects of atmospheric disturbances on the peak-to-peak wavefront errors are assessed. Definitions are included of the maximum permissible controlled patch of entrance pupil of the system, the permissible response time, the permissible field radius, and the required magnitude and frequency of a reference star. It is pointed out that adaptive optics system for visible of near-visible wavelengths is likely to be very expensive, whereas operation at 2-3 microns under best seeing conditions is expected to be useful and have reasonable cost.