Search NASA⌕ Search

SEARCH · Search NASA

Results for “allyl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Quantifying the Relevance of Prompt Dissociations of Resonance Stabilized Free Radicals in Flames

In prior studies from our laboratory we have shown that weakly-bound free radicals have a propensity to promptly dissociate at elevated temperatures relevant to flames. Dissociation can occur so rapidly at high temperatures in such weakly-bound radicals that it interferes with collisional relaxation of internal energies leading to prompt dissociation. While prompt dissociation is a ubiquitous feature in such free radical dissociations, we have hypothesized that its relevance to global combustion observables such as flame speeds depends on satisfying specific criteria. Two criteria that motivate the present study are that the free radicals must play a central role in the oxidation mechanism and that their thermal dissociation rate coefficients should be small enough. Resonance stabilized radicals have bond strengths ~ 50 kcal/mol (or larger) and consequently are known to dissociate slowly and persist even in high temperature environments. In this work we have calculated prompt dissociation probabilities for some simple allylic (allyl, methyl allyl, and dimethyl allyl) radicals. Flame simulations were performed to quantify the relevance of including prompt dissociations of these allylic radicals.

Allyl Radicals↗
DOE OSTI2022

Influence of Thermal Treatment on Preceramic Polymer Grafted Nanoparticle Network Formation: Implications for Thermal Protection Systems and Aerospace Propulsion Components

Preceramic polymer grafted nanoparticles (PCP GNPs) offer potential advantages in the production of polymer-derived ceramic composites compared to neat preceramic polymers (PCPs), such as reduced thermal shrinkage and increased char yield. In comparison to traditional composites (particles + free polymer), PCPs avoid issues of compatibility, agglomeration, and phase separation during processing and provide routes to control nanoparticle arrangement. Prior literature has established that the conversion efficiency of PCPs and PCP GNPs to ceramics and ceramic composites is linked to the thermal pretreatment of these precursor polymers (e.g., curing). In this paper, we investigate the material transformations that occur when exposing PCP GNPs to a low-temperature thermal treatment (≤250 °C) prior to pyrolysis. The PCP GNPs explored in this study possessed silica nanoparticle cores but were distinct in their PCP coronas, having poly(1,1-dimethylpropylsilane) (allyl-GNP)- or poly(1,1-dimethylbenzylethylsilane) (styryl-GNP)-grafted polymers. After undergoing low-temperature thermal treatment, these PCP GNPs exhibited increased char yield at 800 °C; however, unlike commercial PCPs (e.g., allylhydridopolycarbosilane (SMP-10)), obvious cross-linkable sites are not present in the PCP corona structure. Differential scanning calorimetry, oscillatory rheology, and X-ray photon correlation spectroscopy were utilized to elucidate the thermally induced material changes in the allyl- and styryl-GNPs. Thermally induced changes to the structure and behavior of the PCP GNPs were determined to be linked to the chemical structure of the grafted polycarbosilane chains. Styryl-GNPs experienced a curing event between 180 and 250 °C, effecting the formation of a network, which contributed to char yield improvement (at 800 °C). The nanoscale dynamics of this material also shows a transition from diffuse behavior to ballistic behavior because of the cross-linking event. Conversely, the allyl-GNPs did not exhibit a curing event under heat treatment but did show an increase in thermally induced physical cross-linking. The allyl-GNP physical network is stronger after the first cycle of thermal treatment, and it is considered that this contributed to the improvement in char yield post thermal treatment. The advancements in the understanding of the cross-linking behavior of these hybrid materials are expected to advance the application of these materials to turbine engine, advanced friction, and heat-shielding components.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Shape-Selective Synthesis of Alkylcyclopentenyl Cations in Zeolites and Spectroscopic Distinction of Constitutional Isomers

Alkylcyclopentenyl cations belong to the long-lived intermediates that make up the “hydrocarbon pool” during the catalytic conversion of methanol on zeolites, and recent works show that such cations contribute to olefin and aromatics formation. From liquid phase chemistry, two types of alkylcyclopentenyl cations are known and distinguished by the substituent at the central carbon (C-2) of the allylic system: a more stable type with a methyl group at the C-2 and a less stable type with hydrogen at the C-2. The following three linked objectives are pursued: (i) IR spectroscopic distinction of the different substitution patterns at the allylic system of alkylcyclopentenyl cations, (ii) the role of the zeolite framework in determining the substitution pattern, and (iii) identification of alkylcyclopentenyl cations from precursors relevant to methanol-to-olefins conversion. UV–vis and IR spectroscopy are applied in situ to characterize alkylcyclopentenyl cations produced by adsorption of a pentaalkylcyclopentadiene or by adsorption and thermally induced cyclization of 2,6-dimethyl-2,4,6-octatriene. Prior knowledge of electronic spectra is combined with DFT-computed and experimental IR spectra to establish the frequency of the C–H vibration of the C-2 hydrogen-substituted type, and a characteristic red shift of the asymmetric allylic stretching vibration (Δν ≈ -20 to -30 cm –1 ) after replacing hydrogen by methyl at the central carbon of the allylic system. Although DFT demonstrates that both types of ions fit into medium- and large-pore zeolites and that the C-2 methyl-substituted type is thermodynamically favored even in the pores of the considered zeolites, formation of alkylcyclopentenyl cations is found by UV–vis and IR spectra to be shape-selective. The bulkier C-2 methyl-substituted type is detected in large-pore zeolites (MOR, BEA) and in the intersections of medium-pore zeolites (MFI), whereas in channels of medium size (TON), the less bulky C-2 hydrogen-substituted type is exclusively formed. Finally, the type of ion formed and its overall size are dictated by the zeolite framework and are independent of the precursor; the same type of alkylcyclopentenyl cation as found through cyclization of dimethyloctatriene could be generated from ethene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structure and function of a flavin-dependent S-monooxygenase from garlic ( Allium sativum )

Allicin is a component of the characteristic smell and flavor of garlic ( Allium sativum ). A flavin-containing monooxygenase (FMO) produced by A. sativum (AsFMO) was previously proposed to oxidize S-allyl- L -cysteine (SAC) to alliin, an allicin precursor. In this paper, we present a kinetic and structural characterization of AsFMO that suggests a possible contradiction to this proposal. Results of steady-state kinetic analyses revealed that AsFMO exhibited negligible activity with SAC; however, the enzyme was highly active with L -cysteine, N-acetyl- L -cysteine, and allyl mercaptan. We found that allyl mercaptan with NADPH was the preferred substrate-cofactor combination. Rapid-reaction kinetic analyses showed that NADPH binds tightly ($K_D$ of ~2 μM) to AsFMO and that the hydride transfer occurs with pro-R stereospecificity. We detected the formation of a long-wavelength band when AsFMO was reduced by NADPH, probably representing the formation of a charge-transfer complex. In the absence of substrate, the reduced enzyme, in complex with NADP + , reacted with oxygen and formed an intermediate with a spectrum characteristic of C4a-hydroperoxyflavin, which decays several orders of magnitude more slowly than the $k$ cat . The presence of substrate enhanced C4a-hydroperoxyflavin formation and, upon hydroxylation, oxidation occurred with a rate constant similar to the $k$ cat . The structure of AsFMO complexed with FAD at 2.08-Å resolution features two domains for binding of FAD and NADPH, representative of class B flavin monooxygenases. These biochemical and structural results are consistent with AsFMO being an S-monooxygenase involved in allicin biosynthesis through direct formation of sulfenic acid and not SAC oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Specific molecular design of polycarboxylate polymers exhibiting optimal compatibility with clay contaminants in concrete

Highlights: • Allyl ether-based PCEs with short side chain length and low side chain density presented superior clay resistance. • PCEs with medium side chain density exhibited best clay robustness when compared at the absolute dosed quantities. • The proportion of PCE being intercalated into the layered structure of clay was quantified. It is widely recognized that the dispersing ability of polycarboxylate superplasticizers (PCEs) could be hindered due to the presence of clay contaminants in concrete. In this study, a series of allyl ether-based polycarboxylate superplasticizers possessing short polyethylene glycol side chains was successfully synthesized and probed for their clay tolerance. The resulting PCE polymers were characterized via Size Exclusion Chromatography (SEC) to obtain their molecular properties. Thereafter, their dispersing ability was probed in the absence and presence of sodium bentonite. Allyl ether-based polycarboxylate (APEG) polymers possessing short side chains were found to exhibit enhanced clay resistance as compared to that of conventional MPEG PCEs holding long pendant chains. The mode of interaction between APEG PCEs and bentonite was investigated via sorption and XRD measurements. The data revealed that APEG PCEs possessing a lower side chain density intercalate less into the interlayer space of bentonite than those exhibiting higher side chain density.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ring-Opening in the Actinide Cyclopropyl Complexes [Cp 3 U(2,2-Diphenylcyclopropyl)] n – ( n = 0, 1)

The reaction of [Cp 3 UCl] with in situ generated 1-lithium-2,2-dipenylcyclopropane results in the formation of [Cp 3 U(2,2-diphenylcyclopropyl)] (1) in good yield. Reduction of 1 with KC 8 , in the presence of 2.2.2-cryptand, results in the formation of a rare U(III) alkyl complex, [K(2.2.2-cryptand)][Cp 3 U(2,2-diphenylcyclopropyl)] (2). Thermolysis or photolysis of 1 for 10 d in toluene results in isomerization to the U(IV) η 1 -allyl complex, [Cp 3 U(η 1 -3,3-diphenylallyl)] (3). Moreover, photolysis of 2 in THF for 9 h at room temperature results in isomerization to the U(III) η 1 -allyl complex, [K(2,2,2-cryptand)][Cp 3 U(η 1 -3,3-diphenylallyl)] (4). Both 3 and 4 were fully characterized. Additionally, selective labeling of the C α positions of 1 and 2 with deuterium revealed that cyclopropyl ring-opening occurs via distal C–C bond cleavage via a hypothesized η 3 -allyl intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Vinyl Halide-Modified Unsaturated Cyclitols are Mechanism-Based Glycosidase Inhibitors

Suitably configured allyl ethers of unsaturated cyclitols act as substrates of β-glycosidases, reacting via allylic cation transition states. Incorporation of halogens at the vinylic position of these carbasugars, along with an activated leaving group, generates potent inactivators of β-glycosidases. Enzymatic turnover of these halogenated cyclitols (F, Cl, Br) displayed a counter-intuitive trend wherein the most electronegative substituents yielded the most labile pseudo-glycosidic linkages. Structures of complexes with the Sulfolobus β-glucosidase revealed similar enzyme-ligand interactions to those seen in complexes with a 2-fluorosugar inhibitor, the lone exception being displacement of tyrosine 322 from the active site by the halogen. Mutation of Y322 to Y322F largely abolished glycosidase activity, consistent with lost interactions at O5, but minimally affected (7-fold) rates of carbasugar hydrolysis, yielding a more selective enzyme for unsaturated cyclitol ether hydrolysis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Isomeric effects on the reactivity of branched alkenes: An experimental and kinetic modeling study of methylbutenes

Here, a detailed experimental study of the low-to-intermediate temperature combustion of methylbutene isomers, i.e., branched C 5 alkenes, has been undertaken with multiple experimental facilities. Ignition delay times were measured at equivalence ratios 0.5–2.0, 685–1020 K and up to 45 bar condition from two rapid compression machines and showed slight deviation from an Arrhenius behavior for all three isomers, while their reactivity order differs as temperature changes. Sampled intermediates formed during the oxidation process of mixtures at 900–1150 K and 0.82 bar from a flow reactor and at 730 K and 20 bar from a rapid compression machine were analyzed using gas chromatography techniques. Trends in the formation and consumption of sampled intermediates were modeled using a kinetic model developed in this work for all three isomers. Rate of production and sensitivity analyses emphasize the role of double bond-specific reactions governing the global reactivity of these fuels. Additional studies of the addition reactions of HO 2 radicals to the double bond and to allylic radicals may improve the model performance.

2-Methyl-1-butene↗
DOE OSTI2022

On the mechanism of radiation and thermal-induced degradation of the insulation cables in nuclear power plants-the presence of long-lived polyenyl C-centered radicals

Radiolytically and thermally produced long-lived polyenyl C-centered radicals in the nuclear power plants’ insulation cables are detected and measured after more than 45 months of aging since the irradiation and the thermal treatment. Electron Paramagnetic Resonance (EPR) results of the irradiated Cross-linked Polyethylene (XLPE) and Ethylene Propylene Rubber (EthProRu), used as primary insulation materials at Nuclear Power Plants (NPP), clearly demonstrate the presence of polyenyl radicals along with allyl and peroxyl radicals. The yields of these free radicals are dose-rate dependent. EPR results also show the presence of the long-lived polyenyl along with allyl and peroxyl free radicals in the thermally treated XLPE, and EthProRu. These free radicals can cause a major failure in the performance of these cables in NPPs. Besides, the results showed the enhancement in the oxidation reactions due to the migration of copper ions from the conductor to the bulk of the insulation. Further, this study also shows that the oxidation index (OI) and Elongation at Break (EAB) increases and decreases respectively at higher doses and temperatures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Experimental and DFT Calculated IR Spectra of Guests in Zeolites: Acyclic Olefins and Host-Guest Interactions

We performed experimental and periodic density functional theory (DFT) IR spectroscopy to investigate the adsorption of acyclic olefins over both acidic and non-acidic zeolites. Two conjugated polyenes, 2,4-dimethyl-1,3-pentadiene (I) and 2,6-dimethyl-2,4,6-octatriene (II) were studied to probe organic intermediates that can form during methanol conversion, and that can lead to deactivating species known collectively as “coke.” We computed vibrational spectra using zeolite-adsorbed and gas-phase models for both neutral and protonated forms of I and II, and compared these DFT results to diffuse reflectance IR Fourier transform (DRIFT) spectra of zeolite-guest systems. Our experimental and computational results are precise enough to pinpoint that the gauche s-cis conformation of species I predominates during adsorption over de-aluminated zeolite beta. Computed zeolite-adsorbed spectra of the protonated species I and II best represent the DRIFT spectra obtained after the adsorption of the olefins on HMOR at 20 ?, with computed bands at 1543 and 1562 cm–1 for molecules I+ and II+, respectively, attributed to the allylic stretching mode, ?(C=C–C+). These computed band frequencies are within 6 cm–1 of experimental data and confirm that the interaction between neutral acyclic olefins and acidic zeolites leads to protonation of the olefin. Comparison of computed spectra of the protonated species in the gas phase to those in the zeolite indicates that the electrostatic interaction between alkenyl and alkadienyl cations and negative zeolite framework does not significantly impact the position of the allylic stretching bands. These results highlight that computed spectroscopy and thermodynamics coupled with experimental spectra can be used for elucidating complex mixtures in zeolites, and certain spectral features of adsorbed olefins can be accurately modeled by gas-phase calculations. ACKNOWLEDGMENTS BM and SMA were supported by the National Science Foundation under Award # CBET-1512442. Acknowledgment is made to the Donors of the American Chemical Society Petroleum Research Fund for support (or partial support) of this research (#589978-ND5, EDH and FCJ). MDB was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (BES), Division of Materials Science and Engineering. CJM was supported by the DOE, Office of Science, BES, Division of Chemical Sciences, Geosciences, and Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated by Battelle for the U.S. DOE. Computing resources were generously provided through PNNL’s institutional computing (PIC).

Manookian, Babgen↗
DOE OSTI2020

Mechanistic Studies of the Oxidation of Cyclohexene to 2-Cyclohexen-1-one over ALD Prepared Titania Supported Vanadia

Selective oxidation of cyclohexene to 2-cyclohexen-1-one over titania supported vanadia (VO x /TiO 2 ) has been studied using temperature dependent in-situ FTIR spectroscopy in both the presence and absence of oxygen. The VO x /TiO 2 samples were prepared using one atomic layer deposition (ALD) cycle and characterized by Raman spectroscopy. In-situ FTIR data for the oxidation of cyclohexene and perdeuterocyclohexene allow for the formulation of a molecular level reaction mechanism, which is initiated by the transfer of an allyl hydrogen. Oxidation of perdeuterocyclohexene provides a direct probe of the formation of OD and HDO moieties that support the involvement of specific steps in the proposed mechanism. The presence of gas phase oxygen does not lead to a change in the products versus anaerobic conditions. However, gas phase oxygen is significantly incorporated in the CO 2 over-oxidation product above ~250 °C. Data were also obtained with cyclohexene epoxide as the reactant in an effort to determine whether there is a parallel reaction pathway, which is initiated by C=C activation in cyclohexene, that involves cyclohexene epoxide as an intermediate. Furthermore, though a minor pathway involving a cyclohexene epoxide intermediate cannot be ruled out, these data demonstrate that, under experimental conditions, the dominant pathway from cyclohexene to cyclohexene-1-one is initiated by an allyl-H activation step and does not involve an epoxide intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Two-State Reactivity in Iron-Catalyzed Alkene Isomerization Confers σ-Base Resistance

A low-coordinate, high spin (S = 3/2) organometallic iron(I) complex is a catalyst for the isomerization of alkenes. A combination of experimental and computational mechanistic studies supports a mechanism in which alkene isomerization occurs by the allyl mechanism. Importantly, while substrate binding occurs on the S = 3/2 surface, oxidative addition to an η 1 -allyl intermediate only occurs on the S = 1/2 surface. In conclusion, since this spin state change is only possible when the alkene substrate is bound, the catalyst has high immunity to typical σ-base poisons due to the antibonding interactions of the high spin state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

B‐Staging and Crosslinking of Polycarbosilane at Room Temperature: Cure Mechanism and Properties

The viscosity of polycarbosilane (PCS) polymers is not advantageous for free forming. Various fillers and heat are used to obtain a formable paste. Due to the low yield stress, structures and preforms tend to slump or resin will flow out, especially during the curing of the polymer. B-staging of PCS allows for a more stable structure from room temperature until the full cure of the allyl groups occurs with heat. Additionally, hydrosilation is an effective means of crosslinking at room temperature and controlling viscosity. A network structure was formed in SMP-10 using silane and a vinyl-based crosslinker to bridge each polymer chain. Pt addition catalysts were added to enhance the increase in viscosity to make a lightly crosslinked gel to aid in thickening and forming and to improve the ceramic yield at 1000°C. In conclusion, this enables several options for controlling rheology and improving the properties of preceramic polymers to avoid slumping during curing.

inorganic polymers↗
DOE OSTI2020

Shock‐tube spectroscopic water measurements and detailed kinetics modeling of 1‐pentene and 3‐methyl‐1‐butene

Abstract To understand the effects of the chemical structure of two C 5 alkene isomers on their combustion properties, and to highlight the major chemical reactions occurring during their high‐temperature oxidation, water time histories were measured behind reflected shock waves for the oxidation of 1‐pentene (C 5 H 10 ‐1) and 3‐methyl‐1‐butene (3M1B) in 99.5% Ar. The experiments were carried out at three different equivalence ratios ( φ = 0.5, 1.0, and 2.0) at pressures and temperatures ranging from 1.29 to 1.47 atm and 1 331 to 1 877 K, respectively. The H 2 O quantification extends the database for 1‐pentene and provides new insights for 3M1B. These unique results were used to validate and to develop a new detailed kinetics model. Numerical predictions are presented, and the new model was able to capture the results with suitable accuracy, with 3M1B being notably more reactive than C 5 H 10 ‐1. Sensitivity and rate‐of‐production analyses were performed to help explain the results. Under the present conditions, the reactivity is rapidly initiated by molecular dissociation of a fraction of the pentene isomers. The initiation phase then induces H‐atom abstraction by active radicals (H, OH, O, HO 2 , and CH 3 ) to first produce alkenyl C 5 H 9 radicals (or an alkyl radical and an alkenyl radical by breaking a C─C bond) and subsequent, smaller fragments. The difference in terms of reactivity between the isomers is essentially due to the fact that 3M1B has one particularly weak tertiary allylic C─H bond, which allows for fast H‐atom abstraction compared with 1‐pentene.

Grégoire, Claire M.↗
DOE OSTI2023

Mechanistic insights into the pyrolysis of poly (vinyl chloride)

The accumulation of unmanaged plastic waste in the environment has a devastating impact upon marine life and human health. Catalytic and thermal pyrolysis are promising technologies toward the efficient utilization of plastic waste. Yet, the processing of polymers, such as polyvinyl chloride (PVC), that decompose into corrosive compounds remains a major challenge. In this work, we employ density functional theory (DFT) and thermogravimetric analysis (TGA) to explore the elementary chemical steps that underpin the thermal decomposition of PVC. We determine that the dehydrochlorination reaction (i.e., 1 st stage of thermal decomposition) begins in tertiary chloride defects and propagates via HCl–mediated autocatalysis of internal allylic (IA) chloride groups. The latter groups, when in the vicinity of π–conjugated polymer segments, release HCl in a facile manner. We predict that other compounds, including hydrogen halides and H 2 O could also catalyze PVC’s dehydrochlorination. We suggest that hydrogen halides are the most efficient catalysts for this process, while other compounds like H 2 O may slow down the dehydrochlorination compared to purely HCl-catalyzed process, because of the dilution of the produced HCl. This result is corroborated by TGA experiments. Additionally, we study the thermochemistry and kinetics of polyene chain crosslinking and the formation of aromatics. The former reaction proceeds in parallel with the dehydrochlorination process (i.e., during the 1st stage of thermal decomposition), whilst the latter may occur at high temperatures (i.e., during the 2 nd stage of thermal decomposition). Furthermore, this work contributes to the fundamental understanding of molecular scale phenomena that take place during PVC pyrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Advantages of tandem versus simultaneous operation: The case of isomerization/hydrogenation of terpinolene epoxide to Terpinen-4-ol using a Ni/TiO 2 -SiO 2 bifunctional catalyst

The conversion of terpinolene epoxide to terpinen-4-ol is a desirable chemical transformation for the production of a valuable intermediate. Here this report describes a one-pot, two-step system for the reaction that uses a bifunctional Ni/TiO 2 -SiO 2 catalyst with isomerization and hydrogenation capabilities. The TiO 2 -SiO 2 serves to isomerize the starting epoxide. The Ni component works to hydrogenate the allylic double bond. The tandem system achieves a high 64% yield of terpinen-4-ol. X-ray diffraction analysis showed that TiO 2 -SiO 2 was a mixed binary oxide, and Fourier transform infrared spectroscopy of adsorbed pyridine suggested that acid sites were mainly Lewis acid sites. Electron microscopy showed that the Ni/TiO 2 -SiO 2 catalyst consisted of spherical particles comprising a titanosilicate phase with highly dispersed zero-valent Ni or anatase on the surface. Additionally, there was strong interaction between Ni and the TiO 2 -SiO 2 mixed oxides. Control kinetic experiments demonstrated that the tandem use of the catalysts was more effective than simultaneous operation.

42 ENGINEERING↗
DOE OSTI2020

PAH formation from jet stirred reactor pyrolysis of gasoline surrogates

Soot particles and their precursor polycyclic aromatic hydrocarbon (PAH) species, formed during combustion, are responsible for particulate emissions in gasoline direct injection (GDI) engines. To better understand the effects of fuel composition on formation of soot in GDI engines, the pyrolysis of several gasoline surrogates was studied in a jet-stirred reactor across a broad temperature range at atmospheric pressure and 1 s residence time. Fuel and intermediate species, including aromatics up to naphthalene, were measured using gas chromatography (GC). PAH concentrations from pyrolysis of surrogate fuels were compared to gain insight into the effects of fuel composition on PAH formation. In addition, synergistic effects were observed in pyrolysis experiments of binary blends. A detailed kinetic model, recently developed at Lawrence Livermore National Laboratory (LLNL), successfully captured the effects of blending and the concentration of major PAHs. Major reaction pathways are discussed, as well as the role of important intermediate species, such as acetylene, and resonantly stabilized radicals such as allyl, propargyl, cyclopentadienyl, and benzyl in the formation of PAH.

36 MATERIALS SCIENCE↗