SEARCH · Search NASA

Results for “analytical development and support”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS2007

An Analysis of the Effects of RFID Tags on Narrowband Navigation and Communication Receivers

The simulated effects of the Radio Frequency Identification (RFID) tag emissions on ILS Localizer and ILS Glide Slope functions match the analytical models developed in support of DO-294B provided that the measured peak power levels are adjusted for 1) peak-to-average power ratio, 2) effective duty cycle, and 3) spectrum analyzer measurement bandwidth. When these adjustments are made, simulated and theoretical results are in extraordinarily good agreement. The relationships hold over a large range of potential interference-to-desired signal power ratios, provided that the adjusted interference power is significantly higher than the sum of the receiver noise floor and the noise-like contributions of all other interference sources. When the duty-factor adjusted power spectral densities are applied in the evaluation process described in Section 6 of DO-294B, most narrowband guidance and communications radios performance parameters are unaffected by moderate levels of RFID interference. Specific conclusions and recommendations are provided.

LaBerge, E. F. Charles↗

NASA NTRS2018

Re-Architecting the NASA Wire Derating Approach for Space Flight Applications

Mr. Steve Rickman, NASA Technical Fellow for Passive Thermal, proposed a pathfinder study to develop an apparatus for wire and wire bundle thermal testing to measure their performance, and to support development of thermal analytical models. Development of such capability would enable wire and wire bundle amperage capacity. The goal of this study was to assess the feasibility of developing physics-based and regression thermal models of single wires and wire bundles. This report contains the outcome of the NESC assessment.

Steven L Rickman↗

DOE OSTI2026

Robust and High Throughput Tools for Characterization of Wet Cellulosic Biogas Feedstocks and Co-Products: Cooperative Research and Development Final Report, CRADA Number CRD-21-21472

This project will develop standardized analytical procedures to support understanding of the chemical composition of wet manure feedstocks, and the digestate formed following anaerobic digestion of organic waste to produce renewable natural gas (RNG). The developed methods will be validated to improve component mass closure, eliminate ambiguities around key constituents, and document the precision and accuracy of the methods. Following validation of the analytical laboratory methods for characterization of wet organic waste feedstocks and digestate, NLR will use the same samples to build and validate near-infrared (NIR) models for high throughput analysis, potentially deployable at commercial facilities, enabling increased production of low carbon intensity RNG from wet organic wastes.

09 BIOMASS FUELS↗

NASA NTRS2014

The Use of the STAGS Finite Element Code in Stitched Structures Development

In the last 30 years NASA has worked in collaboration with industry to develop enabling technologies needed to make aircraft more fuel-efficient and more affordable. The focus on the airframe has been to reduce weight, improve damage tolerance and better understand structural behavior under realistic flight and ground loading conditions. Stitched structure is a technology that can address the weight savings, cost reduction, and damage tolerance goals, but only if it is supported by accurate analytical techniques. Development of stitched technology began in the 1990's as a partnership between NASA and Boeing (McDonnell Douglas at the time) under the Advanced Composites Technology Program and has continued under various titles and programs and into the Environmentally Responsible Aviation Project today. These programs contained development efforts involving manufacturing development, design, detailed analysis, and testing. Each phase of development, from coupons to large aircraft components was supported by detailed analysis to prove that the behavior of these structures was well-understood and predictable. The Structural Analysis of General Shells (STAGS) computer code was a critical tool used in the development of many stitched structures. As a key developer of STAGS, Charles Rankin's contribution to the programs was quite significant. Key features of STAGS used in these analyses and discussed in this paper include its accurate nonlinear and post-buckling capabilities, its ability to predict damage growth, and the use of Lagrange constraints and follower forces.

Jegley, Dawn C.↗

NASA NTRS1987

Methods for evaluating integrated airframe/propulsion control system architectures

Methodology, analysis, and detailed design of integrated control system architectures suitable for high-performance aircraft of the 1990s are presented. A methodology, with supporting analytical tools, has been developed to provide system designers with the capability to specify candidate architectures and accurately predict their reliability and performance in the early stages of design development. The authors address the methodology and supporting tools.

Gerald C Cohen↗

DOE OSTI2020

Research Needs for Trusted Analytics in National Security Settings

As artificial intelligence, machine learning, and statistical modeling methods become commonplace in national security applications, the drive to create trusted analytics becomes increasingly important. The goal of this report is to identify areas of research that can provide the foundational understanding and technical prerequisites for the development and deployment of trusted analytics in national security settings. Our review of the literature covered several disjoint research communities, including computer science, statistics, human factors, and several branches of psychology and cognitive science, which tend not to interact with one another or cite each other's literatures. As a result, there exists no agreed-upon theoretical framework for understanding how various factors influence trust and no well-established empirical paradigm for studying these effects. This report therefore takes three steps. First, we define several key terms in an effort to provide a unifying language for trusted analytics and to manage the scope of the problem. Second, we outline an empirical perspective that identifies key independent, moderating, and dependent variables in assessing trusted analytics. Though not a substitute for a theoretical framework, the empirical perspective does support research and development of trusted analytics in the national security domain. Finally, we discuss several research gaps relevant to developing trusted analytics for the national security mission space.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

NASA NTRS1972

An analytical and experimental evaluation of shadow shields and their support members.

Review of the major results of an analytical and experimental program aimed at determining the potential effectiveness of shadow shields in minimizing radiant heat transfer into cryogenic propellant tanks on long-duration interplanetary missions, taking into account the thermal interaction between shields and their support structures. Analytical procedures are developed and applied that include the strut-shield interaction in predicting shadow shield performance. The results of experimental studies of the effects of configuration variables on the performance of a scale model of a shadow shield system are presented. The experimental results are used to verify the validity of analytical predictions. The results obtained show that: (1) shadow shields can be effective in reducing the heat transfer into cryogenic propellant tanks, and (2) the conductive heat transfer through supports can be reduced by selective surface coatings.

Stochl, R. J.↗

NASA NTRS1984

An assessment of the capability to calculate tilting prop-rotor aircraft performance, loads and stability

Calculated performance, loads, and stability of the XV-15 tilt rotor research aircraft are compared with wind tunnel and flight measurements, to define the level of the current analytical capability for tilting prop rotor aircraft, and to define the requirements for additional experimental data and further analysis development. The correlation between calculated and measured behavior is generally good, although there are some significant discrepancies. Based on this correlation, the analysis is assessed overall as being adequate for the design, evaluation, and testing of tilting prop rotor aircraft. A general assessment of the state of the art of tilt rotor predictive capability is given. Specific areas are identified where improvements in the capability to calculate performance, loads, and stability are desirable. Requirements for more accurate and detailed data which support the development of improved analytical models are identified as well.

Johnson, W.↗

NASA NTRS1972

Dynamic testing for shuttle design verification

Space shuttle design verification requires dynamic data from full scale structural component and assembly tests. Wind tunnel and other scaled model tests are also required early in the development program to support the analytical models used in design verification. Presented is a design philosophy based on mathematical modeling of the structural system strongly supported by a comprehensive test program; some of the types of required tests are outlined.

Green, C. E.↗

NASA NTRS1997

Rotordynamic Instability Problems in High-Performance Turbomachinery 1996

The first rotordynamics workshop proceedings emphasized a feeling of uncertainty in predicting the stability of characteristics of high-performance turbomachinery. In the second workshop proceedings these uncertainties were reduced through programs established to systematically resolve problems, with emphasis on experimental validation of the forces that influence rotordynamics. In the third proceedings many programs for predicting or measuring forces and force coefficients in high-performance turbomachinery produced results. Data became available for designing new machines with enhanced stability characteristics or for upgrading existing machines. In the fourth proceedings there emerged trends towards a more unified view of rotordynamic instability problems and several encouraging new analytical developments. The fifth workshop supported the continuing trend toward a unified view with several new developments in the design and manufacture of new turbomachineries with enhanced stability characteristics along with new data and associated numerical/theoretical results. The sixth workshop report provided field experience and experimental results, and expanded the use of computational and control techniques with integration of damper, bearing, and eccentric seal operation results. The seventh workshop report provided field experiences, numerical, theoretical, and experimental results and control methods for seals, bearings, and dampers with some attention given to variable thermophysical properties and turbulence measurements, and introduction of two-phase flow results. In the present workshop, active magnetic bearings (AMB's) evolve into a new method of measuring rotordynamic coefficients with discussions on honeycomb seals, drop of magnetically supported rotors, seals, bearings and dampers with new data being reported. The intent of the workshop and this proceedings is to provide a continuing impetus for an understanding and resolution of these problems.

Source record↗

NASA NTRS2005

Inspection of the Math Model Tools for On-Orbit Assessment of Impact Damage Report

In Spring of 2005, the NASA Engineering Safety Center (NESC) was engaged by the Space Shuttle Program (SSP) to peer review the suite of analytical tools being developed to support the determination of impact and damage tolerance of the Orbiter Thermal Protection Systems (TPS). The NESC formed an independent review team with the core disciplines of materials, flight sciences, structures, mechanical analysis and thermal analysis. The Math Model Tools reviewed included damage prediction and stress analysis, aeroheating analysis, and thermal analysis tools. Some tools are physics-based and other tools are empirically-derived. Each tool was created for a specific use and timeframe, including certification, real-time pre-launch assessments, and real-time on-orbit assessments. The tools are used together in an integrated strategy for assessing the ramifications of impact damage to tile and RCC. The NESC teams conducted a peer review of the engineering data package for each Math Model Tool. This report contains the summary of the team observations and recommendations from these reviews.

Harris, Charles E.↗

NASA NTRS2007

Inspection of the Math Model Tools for On-Orbit Assessment of Impact Damage Report

In Spring of 2005, the NASA Engineering Safety Center (NESC) was engaged by the Space Shuttle Program (SSP) to peer review the suite of analytical tools being developed to support the determination of impact and damage tolerance of the Orbiter Thermal Protection Systems (TPS). The NESC formed an independent review team with the core disciplines of materials, flight sciences, structures, mechanical analysis and thermal analysis. The Math Model Tools reviewed included damage prediction and stress analysis, aeroheating analysis, and thermal analysis tools. Some tools are physics-based and other tools are empirically-derived. Each tool was created for a specific use and timeframe, including certification, real-time pre-launch assessments. In addition, the tools are used together in an integrated strategy for assessing the ramifications of impact damage to tile and RCC. The NESC teams conducted a peer review of the engineering data package for each Math Model Tool. This report contains the summary of the team observations and recommendations from these reviews.

Harris, Charles E.↗

NASA NTRS2010

Orbiter Boundary Layer Transition Prediction Tool Enhancements

Updates to an analytic tool developed for Shuttle support to predict the onset of boundary layer transition resulting from thermal protection system damage or repair are presented. The boundary layer transition tool is part of a suite of tools that analyze the local aerothermodynamic environment to enable informed disposition of damage for making recommendations to fly as is or to repair. Using mission specific trajectory information and details of each d agmea site or repair, the expected time (and thus Mach number) of transition onset is predicted to help define proper environments for use in subsequent thermal and stress analysis of the thermal protection system and structure. The boundary layer transition criteria utilized within the tool were updated based on new local boundary layer properties obtained from high fidelity computational solutions. Also, new ground-based measurements were obtained to allow for a wider parametric variation with both protuberances and cavities and then the resulting correlations were calibrated against updated flight data. The end result is to provide correlations that allow increased confidence with the resulting transition predictions. Recently, a new approach was adopted to remove conservatism in terms of sustained turbulence along the wing leading edge. Finally, some of the newer flight data are also discussed in terms of how these results reflect back on the updated correlations.

Berry, Scott A.↗

NASA NTRS1987

The Advanced Turbine Technology Applications Program (ATTAP)

The need for advances in ceramic techniques in order to manufacture reliable cost-effective ceramic components for automotive gas turbine engines, in particular in the hot section of the engine, is examined. The objectives of the ATTAP is to establish the reliability of ceramic component designs and materials in automotive gas turbines; to expand the experimental data base in the operation environment; and to complete the development of analytical tools needed to support industry in the successful application of ceramics to long-life turbine engines. The role of industry and the government in the development of the gas turbine engine is discussed.

Kramer, Saunders B.↗

NASA NTRS2009

Capabilities of the Natural Environments Branch at NASA's Marshall Space Flight Center, Revised 2009

The Natural Environment Branch at NASA's Marshall Space Flight Center (MSFC) has the responsibility to provide natural environments engineering support to programs and projects. The Natural Environments Branch is responsible for natural environments definitions, modeling, database development, and analytical assessments of effects. Natural Environments Branch personnel develop requirements for flight projects and provide operational support for space and launch vehicle systems. To accomplish these responsibilities, models and analytical tools have been developed in the areas of planetary atmospheres, meteoroids, ionizing radiation, plasmas and ionospheres, magnetic and gravitational fields, spacecraft charging modeling, and radiation effects on electronic parts. This paper will build on a previous paper published in 2006 and provide updated descriptions of the capabilities within the Natural Environments Branch1. Updates describing improvements and new releases of several analytical tools and models will be presented. Separate sections will specifically describe modifications in the Meteoroid Engineering Model (MEM), and the Marshall Solar Activity Future Estimation (MSAFE) capabilities.

Edwards, David L.↗

NASA NTRS2018

Earthdata Cloud Analytics Project

This presentation describes a nascent project in NASA to develop a framework to support end-user analytics of NASA's Earth science data in the cloud. The chief benefit of migrating EOSDIS (Earth Observation System Data and Information Systems) data to the cloud is to position the data next to enormous computing capacity to allow end users to process data at scale. The Earthdata Cloud Analytics project will user a service-based approach to facilitate the infusion of evolving analytics technology and the integration with non-NASA analytics or other complementary functionality at other agencies and in other nations.

data services↗

NASA NTRS2018

Advanced Analytics and Big Earth Data

NASA's Earth Science Data Systems process, archive and distribute petabytes of Earth Observation data to a variety of end users. These end users will face dramatically increased data size in the near future, bringing about new challenges and opportunities in analyzing those data. One area of particular ferment currently is Machine Learning. Many Machine Learning methods are black boxes, limiting direct insight into the data's properties. However, they can be used for a variety of data enhancement purposes, such as parameter retrieval, data fusion and image classification and segmentation. The Earth Observing System Data and Information System is also evolving to host large data volumes in the cloud, enabling data proximal analysis. As part of this effort, an Analytics framework is being developed to support and enhance user analysis of the data. By using standards based services in the framework, diverse user communities can be served, while also allowing inter-system collaboration in the analysis process.

Cloud Computing↗

NASA NTRS1989

Structures technologies for the Precision Segmented Reflector (PSR)

The PSR program is a first step in the development and validation of increasingly more precise and larger size lightweight segmented reflector technology that might ultimately be used in space on projects such as the Large Deployable Reflector (LDR). The LDR is described, and objectives of the PSR are discussed. Requirements for the PSR, including structure dimensions and geometric constraints, mass characteristics, erectable and deployable concepts, truss surface precision, and thermal and dynamic characteristics are discussed along with gravity deflections, secondary support characteristics, and removable members. Analytical development and system- and component-level tests are outlined.

Satter, C. M.↗