Search NASA⌕ Search

SEARCH · Search NASA

Results for “atom migration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Passive Oxide Film Growth Observed On the Atomic Scale

Despite of the ubiquitous presence of passivation on most metal surfaces, the microscopic-level picture of how surface passivation occurs has been hitherto unclear. Using the canonical example of the surface passivation of aluminum, here we employ in situ atomistic transmission electron microscopy observations and computational modeling to disentangle entangled microscopic processes and identify the atomic processes leading to the surface passivation. Based on atomic-scale observations of the layer-by-layer expansion of the metal lattice and its subsequent transformation into the amorphous oxide, it is shown that the surface passivation occurs via a two-stage oxidation process, in which the first stage is dominated by intralayer atomic shuffling whereas the second stage is governed by interlayer atomic disordering upon the progressive oxygen uptake. The first stage can be bypassed by increasing surface defects to promote the interlayer atomic migration that results in direct amorphization of multiple atomic layers of the metal lattice. The identified two-stage reaction mechanism and the effect of surface defects in promoting interlayer atomic shuffling can find broader applicability in utilizing surface defects to tune the mass transport and passivation kinetics, as well as the composition, structure and transport properties of the passivation films.

25 ENERGY STORAGE↗

Thermal Annealing Effect on Structure and Properties of Tungsten Surface Irradiated with High Fluence and Low Energy Alpha-Particles

The paper presents research into the surface morphology, helium cluster formation and mechanical properties of high-purity tungsten after the high fluence and low-energy helium ion implantation and subsequent annealing. Investigations are based on scanning electron and atomic force microscopy observations and thermal desorption measurements. Because of the local stresses appearing within the energy loss straggling of helium ions, atoms migrate at distances significantly increasing the ion projective range, and create mobile coalescence of helium atoms and immobile helium-vacancy clusters. The latter form helium bubbles in the energy loss straggling which cause the surface blistering. Local stresses induced by helium coalescence and helium-vacancy clusters beyond the energy loss straggling result in the material strengthening or hardness increase. Subsequent 600°С annealing provides the size growth of blisters on the metal surface irradiated with helium ions and high helium desorption due to the migration of mobile coalescence of helium atoms. With the increasing annealing temperature from 600 to 1000°С, the layer corresponding to the projective range of helium ions fully fractures due to the interstitial helium atoms releasing from immobile helium-vacancy clusters. After 1000°С annealing, the tungsten hardness returns to its initial value.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shapeshifting Nanocatalyst for CO2 Conversion

The conversion of CO2 into high-value chemicals through a photoreduction reaction in water is a promising route to reduce the dependence on fossil fuels. Enhancing selectivity toward hydrocarbons or alcohols can be achieved by Ag-Cu alloys. However, the stabilized surface state created by Ag-Cu interactions is still poorly understood. In this work, multi-modal in situ X-ray experiments reveals underlying mechanisms and the evolution of Ag-Cu nanoparticles under CO2 reduction reaction (CO2RR) conditions. Both morphological and chemical changes of Ag and Cu species induced by diffusion mechanics are tracked during nanocatalyst operation. The initial spheroid Ag-Cu nanoparticles are composed of a Cu-rich shell and Ag-rich core. The reduction treatment promotes Ag migration toward the surface. During photocatalytic CO2 reduction reaction, Cu atoms migrate back to the surface, forming Ag-Cu-O species. The study observes the surface oxidation of Cu(0) to Cu+ and the presence of Ag at the sub-surface region. Furthermore, nanoparticles change their shape, decreasing their specific surface area, driven by Cu diffusion during the CO2 photoreduction reaction. The results provide invaluable insights into the dynamic restructuring of the catalyst under reaction conditions and into the active species responsible for CO2 conversion.

CO2 reduction reaction↗

Counter-Intuitive Structural Instability Aroused by Transition Metal Migration in Polyanionic Sodium Ion Host

The structure of polyanionic materials is conventionally known to be free of transition metal migration and structurally stable when storing/releasing sodium ions. Herein, the observation of enhanced cycling stability of a typical polyanionic cathode, Na 3 VCr(PO 4 ) 3 (NVCP) at lower temperature (-15 degrees C vs 30 degrees C), triggers the exploration of its structural origins with a surprising finding that the migratable nature of vanadium in NVCP leads to detrimental structural degradation of the polyanionic host upon cycling. The correlation between long range and short range structural change associated with this atomic migration is established via a strong combination of various in situ/ex situ characterization tools, revealing the essential V-to-Na1 site migration. Such transition metal migration is effectively suppressed when V atoms are pinned to their original position in the lattice by lowering the temperature. More importantly and practically, a room temperature-based deep sodiation strategy is further developed to recover the structure. Overall, this work challenges the long-standing assumption of the stability of the polyanionic framework structure and calls for urgent attention to the structural understanding of the NVCP system as well as strategy development for property enhancement.

25 ENERGY STORAGE↗

Laser-stimulated migration of adsorbed atoms on solid surfaces

This paper presents a unified theory of the coherent, multiple-photon excitation and laser-stimulated migration of atoms adsorbed on solid surfaces. We show that under steady-state excitation the migration of the adsorbed atom on the surface is diffusional, with diffusion constant dependent upon field intensity, surface temperature, relaxation constants, dipole moment strength, laser frequency, and the vibrational frequency of the adsorbed atom. In particular, it is shown that the rate of diffusion is proportional to the field intensity. Finally, we discuss the utility of laser-stimulated migration in the enhancement of surface chemical reactions, as well as in the analysis of surface relaxational processes.

Slutsky, M. S.↗

Mending cracks atom-by-atom in rutile TiO2 with electron beam radiolysis

Abstract Rich electron-matter interactions fundamentally enable electron probe studies of materials such as scanning transmission electron microscopy (STEM). Inelastic interactions often result in structural modifications of the material, ultimately limiting the quality of electron probe measurements. However, atomistic mechanisms of inelastic-scattering-driven transformations are difficult to characterize. Here, we report direct visualization of radiolysis-driven restructuring of rutile TiO 2 under electron beam irradiation. Using annular dark field imaging and electron energy-loss spectroscopy signals, STEM probes revealed the progressive filling of atomically sharp nanometer-wide cracks with striking atomic resolution detail. STEM probes of varying beam energy and precisely controlled electron dose were found to constructively restructure rutile TiO 2 according to a quantified radiolytic mechanism. Based on direct experimental observation, a “two-step rolling” model of mobile octahedral building blocks enabling radiolysis-driven atomic migration is introduced. Such controlled electron beam-induced radiolytic restructuring can be used to engineer novel nanostructures atom-by-atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isotope exchange kinetics in metal hydrides I : TPLUG model.

A one-dimensional isobaric reactor model is used to simulate hydrogen isotope exchange processes taking place during flow through a powdered palladium bed. This simple model is designed to serve primarily as a platform for the initial development of detailed chemical mechanisms that can then be refined with the aid of more complex reactor descriptions. The one-dimensional model is based on the Sandia in-house code TPLUG, which solves a transient set of governing equations including an overall mass balance for the gas phase, material balances for all of the gas-phase and surface species, and an ideal gas equation of state. An energy equation can also be solved if thermodynamic properties for all of the species involved are known. The code is coupled with the Chemkin package to facilitate the incorporation of arbitrary multistep reaction mechanisms into the simulations. This capability is used here to test and optimize a basic mechanism describing the surface chemistry at or near the interface between the gas phase and a palladium particle. The mechanism includes reversible dissociative adsorptions of the three gas-phase species on the particle surface as well as atomic migrations between the surface and the bulk. The migration steps are more general than those used previously in that they do not require simultaneous movement of two atoms in opposite directions; this makes possible the creation and destruction of bulk vacancies and thus allows the model to account for variations in the bulk stoichiometry with isotopic composition. The optimization code APPSPACK is used to adjust the mass-action rate constants so as to achieve the best possible fit to a given set of experimental data, subject to a set of rigorous thermodynamic constraints. When data for nearly isothermal and isobaric deuterium-to-hydrogen (D {yields} H) and hydrogen-to-deuterium (H {yields} D) exchanges are fitted simultaneously, results for the former are excellent, while those for the latter show pronounced deviations at long times. These discrepancies can be overcome by postulating the presence of a surface poison such as carbon monoxide, but this explanation is highly speculative. When the method is applied to D {yields} H exchanges intentionally poisoned by known amounts of CO, the fitting results are noticeably degraded from those for the nominally CO-free system but are still tolerable. When TPLUG is used to simulate a blowdown-type experiment, which is characterized by large and rapid changes in both pressure and temperature, discrepancies are even more apparent. Thus, it can be concluded that the best use of TPLUG is not in simulating realistic exchange scenarios, but in extracting preliminary estimates for the kinetic parameters from experiments in which variations in temperature and pressure are intentionally minimized.

99 GENERAL AND MISCELLANEOUS↗

Model for radon diffusion through the lunar regolith.

Description of a model for radon diffusion through the lunar regolith in which the atom migrates by random walk. The regolith is represented by a system of randomly oriented baffles in which the mean distance which the atom travels between two collisions takes on the role of a mean free path. The effective mean time between two collisions depends on two entities: the actual mean time-of-flight and the mean sticking time on grain surfaces for one collision. The latter depends strongly on the temperature and the heat of adsorption of radon on regolith materials. Both the mean free path as well as the heat of adsorption are either poorly known or unknown for the lunar regolith; hence these quantities are treated as free parameters. Because of the greatly different mean lifetimes against radioactive decay of Rn219, Rn220, and Rn222, the regolith acts as a powerful 'filter' for these species. Rn222 escape is significant (32%) even for a mean free path of 1 micron, a heat of adsorption of 7.0 kcal/mole and a regolith depth of 4 m. Calculations of radon escape from a 4 m thick regolith, using mean free paths of 1, 10, and 80 microns and heats of adsorption of 4.0, 5.2, and 7.0 kcal/mole show that the Rn222/Rn220 escape ratio can be as small as 7.7 and as large as, or larger than 47. The small value of 7.7 is of particular interest, because it is nearly equal to the escape ratio inferred by Turkevich et al. (1970) from their Surveyor 5 results.

Friesen, L. J.↗

Experimental estimation of oxidation-induced Si atoms emission on Si(001) surfaces

Kinetics of Si atoms emission during the oxidation of Si(001) surfaces have been investigated using reflection high energy electron diffraction combined with Auger electron spectroscopy. The area ratio of the 1 × 2 and the 2 × 1 domains on a clean Si(001) surface changed with the oxidation of the surface by Langmuir-type adsorption. This change in the domain ratio is attributed to the emission of Si atoms. We can describe the changes in the domain ratio using the Si emission kinetics model, which states that (1) the emission rate is proportional to the oxide coverage, and (2) the emitted Si atoms migrate on the surface and are trapped at S{sub B} steps. Based on our model, we find experimentally that up to 0.4 ML of Si atoms are emitted during the oxidation of a Si(001) surface at 576 °C.

36 MATERIALS SCIENCE↗

Effects of boron dopants of Si (001) substrates on formation of Ge layers by sputter epitaxy method

The formation of Ge layers on boron-doped Si (001) substrates by our sputter epitaxy method has been investigated. The surface morphology of Ge layers grown on Si substrates depends on the substrate resistance, and flat Ge layers are obtained on Si substrates with 0.015 Ω cm resistivity. Highly boron-doped Si substrates cause a transition in the dislocation structure from complex dislocations with 60° dislocation glide planes to 90° pure-edge dislocations, resulting in the formation of flat Ge layers. Furthermore, we have found that the surface morphology of the Ge layers improves with increasing Ge layer thickness. Ge atoms migrating on the deposited Ge layers tend to position themselves at the reactive sites, where the reactivity is related to the number of bonding contacts between the Ge atom and the surface. This modifies the surface morphology, resulting in a flatter surface. Boron dopants together with the sputter epitaxy method effectively suppress the growth of Ge islands and result in the formation of flat Ge layers.

36 MATERIALS SCIENCE↗

Simulation of Individual Atoms in Action

The atomic dynamics of the hole in graphene was simulated via a kinetic monte carlo method. Probabilities for atomic migration, insertion and ejection were determined by ab-initio calculation. The simulation starts with a predefined hole in a graphene sheet. As it proceeds, the hole grows and the atoms along the edge rearrange themselves. The zigzag configuration is found to dominate the armchair one. http://newscenter.lbl.gov/press-releases/2009/03/26/atoms-in-action/

74 ATOMIC AND MOLECULAR PHYSICS↗

Physics-based simulation of EM and SM in TSV-based 3D IC structures

Evolution of stresses in through-silicon-vias (TSVs) and in the TSV landing pad due to the stress migration (SM) and electromigration (EM) phenomena are considered. It is shown that an initial stress distribution existing in a TSV depends on its architecture and copper fill technology. We demonstrate that in the case of proper copper annealing the SM-induced redistribution of atoms results in uniform distributions of the hydrostatic stress and concentration of vacancies along each segment. In this case, applied EM stressing generates atom migration that is characterized by kinetics depending on the preexisting equilibrium concentration of vacancies. Stress-induced voiding in TSV is considered. EM induced voiding in TSV landing pad is analyzed in details.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural reversibility of Cu doped NU-1000 MOFs under hydrogenation conditions

The metal-organic framework (MOF), NU-1000, and its metalated counterparts have found proof-of-concept application in heterogeneous catalysis and hydrogen storage amongst others. A vapor-phase technique, akin to atomic layer deposition (ALD), is used to selectively deposit divalent Cu ions on oxo, hydroxo-bridged hexa-zirconium(IV) nodes capped with terminal –OH and -OH 2 ligands. Subsequent reaction with steam yields node-anchored, CuII-oxo,hydroxo clusters. We find that cluster installation via AIM (= ALD In MOFs) is accompanied by an expansion of MOF mesopore (channel) diameter . We investigated the behavior of the cluster-modified material, termed Cu-AIM-NU-1000, to heat treatment up to 325 °C, at atmospheric pressure with a low flow of H2 into the reaction cell. The response under these conditions revealed two important results: (1) Above 200 °C, the initially installed few-metal-ion clusters reduce to neutral Cu atoms. The neutral atoms migrate from the nodes and aggregate into Cu nanoparticles. While the size of particles formed in the MOF interior is constrained by the width of mesopores (ca. 3 nm), those formed on the exterior surface of the MOF can grow as large as ca. 8 nm. (2) Reduction and release of Cu atoms from the MOFs nodes is accompanied NU-1000 undergoes dynamic structural transformation as it reverts back to its original dimension following the release. These results show while the MOF framework itself remains intact at 325 °C in an H 2 atmosphere, the small, AIM-installed Cu II -oxo,hydroxo clusters are stable with respect to reduction and conversion to metallic nanoparticles only up to ~200 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Difference in charge transport properties of Ni-Nb thin films with native and artificial oxide

Here, we report on the properties of native and artificial oxide amorphous thin film on a surface of an amorphous Ni-Nb sample. Careful measurements of local current-voltage characteristics of the system Ni-Nb / NiNb oxide/Pt, were carried out in contact mode of an atomic force microscope. Native oxide showed n-type conductivity, while in the artificial one exhibited p-type one. The shape of current-voltage characteristic curves is unique in both cases and no analogical behavior is found in the literature. X-ray photoelectron spectroscopy (XPS) measurements were used to detect chemical composition of the oxide films and the oxidation state of the alloy components. Detailed analysis of the XPS data revealed that the structure of natural Ni-Nb oxide film consists of Ni-NbO{sub x} top layer and nickel enriched bottom layer which provides n-type conductivity. In contrast, in the artificial oxide film Nb is oxidized completely to Nb{sub 2}O{sub 5}, Ni atoms migrate into bulk Ni-Nb matrix. Electron depletion layer is formed at the Ni-Nb/Nb{sub 2}O{sub 5} interface providing p-type conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transport properties in dilute UN ( X ) solid solutions ( X = Xe , Kr )

Uranium nitride (UN) is a candidate fuel for current GEN III fission reactors, for which it is investigated as an accident-tolerant fuel, as well as for future GEN IV reactors. In this study, we investigate the kinetic properties of gas fission products (Xe and Kr) in UN. Binding and migration energies are obtained using density functional theory, with an added Hubbard correlation to model f electrons, and the occupation matrix control scheme to avoid metastable states. These energies are then used as input for the self-consistent mean field method which enables to determine transport coefficients for vacancy-mediated diffusion of Xe and Kr on the U sublattice. The magnetic ordering of the UN structure is explicitly taken into account, for both energetic and transport properties. Solute diffusivities are compared with experimental measurements and the effect of various parameters on the theoretical model is carefully investigated. We find that kinetic correlations are very strong in this system, and that despite atomic migration anisotropy, macroscopic solute diffusivities show limited anisotropy. Our model indicates that the discrepancy between experimental measurements probably results from different irradiation conditions, and hence different defect concentrations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and chemical disorder enhance point defect diffusion and atomic transport in Ni 3 Al-based γ' phase

The ordered L1 2 γ' Ni 3 Al intermetallic inclusions are routinely used as strengthening constituents in Ni-based superalloys and recent high-entropy alloys. As there are different metallic elements relative to the alloy matrix, the composition of γ' phase inclusions usually suffers some variations. In this work, we studied the elemental partition and its influence on atomic transport properties in a model (NiCo) 3 Al γ' phase with chemical and structural disorder. Combining the Monte Carlo and molecular static techniques, we first determined the elemental distribution in such compositionally-complexed γ' phase. The results suggest that Co tends to segregate, which profoundly influences defect energetics and diffusion properties. By modeling thermally activated diffusion by molecular dynamics, we found that chemical disorder induced by Co can enhance vacancy diffusion while significantly suppress diffusion via interstitial atom migration, as compared to the stoichiometric γ' Ni 3 Al. We further reveal that these observations are closely related to the defect energetics in these systems. Furthermore, our results explain the effects of disorder, long- and short-range orders on the diffusion properties in multicomponent intermetallic alloys, which helps to understand the stability and, thus, γ'-phase-assisted strengthening at different conditions including annealing and irradiation.

36 MATERIALS SCIENCE↗

Asymmetrical In{sub 0.1}Ga{sub 0.9}As/Al{sub 0.3}Ga{sub 0.7}As quantum rings and their optical properties

In{sub 0.1}Ga{sub 0.9}As/Al{sub 0.3}Ga{sub 0.7}As quantum rings were fabricated by droplet epitaxy technique using molecular beam epitaxy (MBE). 7.5 ML In{sub 0.1}Ga{sub 0.9}As droplets are deposited on Al{sub 0.3}Ga{sub 0.7}As epitaxial layer at 350°C and 250°C. After that, they were crystallized under As{sub 4} pressure of 8×10{sup −6} torr at 250°C. The surface morphology of quantum rings is studied by atomic force microscopy. It is found that quantum rings are not symmetrical due to anisotropic behavior of In and Ga atom migration during crystallization process. The quantum ring density of the sample deposition at 350°C and 250°C are 1×10{sup 9} cm{sup −2} and 2.6×10{sup 9} cm{sup −2}, respectively. Consequently, the asymmetric quantum rings with deposition at 350°C give two photoluminescence (PL) peaks at 1.27 and 1.38 eV at 20K. However, the PL peak of quantum rings with deposition at 350°C is merged with GaAs peak due to the poor size distribution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗