Search NASA⌕ Search

SEARCH · Search NASA

Results for “band engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Phase‐Dependent Band Gap Engineering in Alloys of Metal‐Semiconductor Transition Metal Dichalcogenides

Abstract Bandgap engineering plays a critical role in optimizing the electrical, optical and (photo)‐electrochemical applications of semiconductors. Alloying has been a historically successful way of tuning bandgaps by making solid solutions of two isovalent semiconductors. In this work, a novel form of bandgap engineering involving alloying non‐isovalent cations in a 2D transition metal dichalcogenide (TMDC) is presented. By alloying semiconducting MoSe 2 with metallic NbSe 2 , two structural phases of Mo 0.5 Nb 0.5 Se 2 , the 1T and 2H phases, are produced each with emergent electronic structure. At room temperature, it is observed that the 1T and 2H phases are semiconducting and metallic, respectively. For the 1T structure, scanning tunneling microscopy/spectroscopy (STM/STS) is used to measure band gaps in the range of 0.42–0.58 at 77 K. Electron diffraction patterns of the 1T structure obtained at room temperature show the presence of a nearly commensurate charge density wave (NCCDW) phase with periodic lattice distortions that result in an uncommon 4 × 4 supercell, rotated approximately 4° from the lattice. Density‐functional‐theory calculations confirm that local distortions, such as those in a NCCDW, can open up a band gap in 1T ‐Mo 0.5 Nb 0.5 Se 2 , but not in the 2H phase. This work expands the boundaries of alloy‐based bandgap engineering by introducing a novel technique that facilitates CDW phases through alloying.

Wang, Shuxi↗
DOE OSTI2023

Band inversion-driven warping and high valley degeneracy

Band inversion is a physical phenomenon that can warp the band structure in topological insulators, generating multiple electronic valleys for conducting carriers. However, the conditions under which band inversion induces warping are not well understood. Here, we derive two general rules that must be satisfied for band warping to occur in centrosymmetric and non-magnetic topological insulators: (1) bands must be sufficiently inverted, and (2) secondary bands must have opposite parity and be close in energy to the band edges. We chart the valley degeneracies that can emerge from band inversion in each of the 11 centrosymmetric point groups, revealing that an increase in the valley degeneracy between 2- and 48-fold is possible from band inversion. The generalized rules offer a unique band engineering approach by capitalizing on the non-trivial electronic structures of topological insulators.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Band Gap Engineering and Metastable Phase Discovery in Cu 2 BaSnS 4– x Se x Nanocrystals via Topotactic Anion Exchange

Earth-abundant multinary inorganic chalcogenides, such as Cu 2 BaSnS 4–x Se x (CBTSSe), have emerged as promising absorbers for next-generation solar cells. However, accessing colloidal CBTSSe nanocrystals, including metastable polymorphs with more favorable optoelectronic properties, remains a critical synthetic challenge. Herein, we report the first use of topotactic anion exchange to access metastable crystal structures in soft chemistry syntheses. By varying the stoichiometry of selenium precursors, we directly synthesize Cu 2 BaSnS 4–x Se x (0 ≤ x ≤ 4) nanocrystals with a broad band gap tunability of 1.51–2.04 eV. At x = 4, a new metastable trigonal phase of Cu 2 BaSnSe 4 is isolated. This phase arises via an in-situ topotactic anion exchange from sulfur-rich Cu 2 BaSnS 4–x Se x intermediates, while retaining both the cation sublattice and overall nanocrystal morphology. The trigonal Cu 2 BaSnSe 4 exhibits a nearly direct band gap that is 280 meV lower than its thermodynamically stable orthorhombic counterpart, aligning more closely with the optimal band gap for single-junction solar cells. In contrast, a post-synthetic anion exchange route leads to the thermodynamically preferred orthorhombic polymorph, pointing to the critical nature of the in-situ transformation. Our findings open a versatile pathway for both polymorphic and morphological control in colloidal nanocrystals, expanding the synthetic design space for new optoelectronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Out-of-Plane Magnetic Anisotropy Engineered via Band Distortion in Two-Dimensional Materials

We unveil the connection between magnetic anisotropy and band structures in Γ-specialized In 2 Se 3 /Fe 3 GeTe 2 heterostructure, through first-principles calculations. A significant band distortion occurs near the Γ point with a formed valley. As the band-distortion-caused valley moves relative to the quasivalence band maximum, the magnetic anisotropy switches between in-plane and out-of-plane magnetic anisotropy. Such a rule applies to either the strained or polarization-switched In 2 Se 3 /Fe 3 GeTe 2 heterostructure. Furthermore, these findings demonstrate the feasibility of predicting the magnetic anisotropy by band structure modification in two-dimensional magnetic systems.

2-dimensional systems↗
DOE OSTI2023

Quantum Dots on Silicon-on-Insulator (QD/SOI): Nanoscale Strain and Band Structure Engineering (Final Report)

As the project titles indicate, the work focused on Group IV nanomembranes (NMs), thin functional layers, and interfaces, all with one or more dimensions at the nanoscale. The primary focus was discovery driven fundamental science. This approach led to surprising new, unexpected results that ended up being patentable and creating commercial value, but that were also high-impact science. Our effort divided into several overlapping thrusts: 1) strain engineering of NMs, via both lattice strain and externally applied strain, 2) interfaces between crystalline semiconductor NMs and other 2D sheets that are stacked or grown on each other, and 3) charge transport (electronics and optoelectronics) in thin layers, sheets, and surfaces. We accomplish these goals via 1) fabrication of new or higher-quality materials using NM approaches, 2) growth of new combinations, or 3) transfer and stacking to create new composites. The range of materials included combinations of Si, Ge, graphene, and several III-V compounds. The work has foundations in both nano- and mesoscale science.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electronic structure of Humble defects in Ge and Ge 0.8⁢ Si 0.2

The group-IV diamond-structure elements are known to host a variety of planar defects, including {001} planar defects in C and {001}, {111}, and {113} planar defects in Si and Ge. Among the {001} planar defects, the Humble defect, known for some time to occur in Ge, has recently also been observed in Si-Ge alloys, but the details of its electronic structure remain poorly understood. Here, in this work, we perform first-principles density-functional calculations to study Humble defects in both Ge and Ge 0.8⁢ Si 0.2 . We also measure the Si L 2,3 -edge electron energy-loss spectra both at the defect and in a bulk-like region far from the defect and compare with theoretical calculations on corresponding Si sites in our first-principles calculations. We find that inclusion of core-hole effects in the theory is essential for reproducing the observed L 2,3 edge spectra, and that once they are included, the results provide a set of fingerprints for different types of local atomic bonding environments in Ge 0.8⁢ Si 0.2 . Our first-principles calculations reveal that the Humble defects have a tendency to enlarge the electronic band gap, which may have potential uses in band engineering. The use of hybrid functionals for an improved description of the band gap in these systems is also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Superconductivity and strong correlations in moiré flat bands

Strongly correlated systems can give rise to spectacular phenomenology, from high-temperature superconductivity to the emergence of states of matter characterized by long-range quantum entanglement. Low-density flat-band systems play a vital role because the energy range of the band is so narrow that the Coulomb interactions dominate over kinetic energy, putting these materials in the strongly-correlated regime. Experimentally, when a band is narrow in both energy and momentum, its filling may be tuned in situ across the whole range, from empty to full. Recently, one particular flat-band system—that of van der Waals heterostructures, such as twisted bilayer graphene—has exhibited strongly correlated states and superconductivity, but it is still not clear to what extent the two are linked. As a result, we review the status and prospects for flat-band engineering in van der Waals heterostructures and explore how both phenomena emerge from the moiré flat bands.

Balents, Leon↗
DOE OSTI2021

Finding the order in complexity: The electronic structure of 14-1-11 zintl compounds

Yb 14 MnSb 11 and Yb 14 MgSb 11 have rapidly risen to prominence as high-performing p-type thermoelectric materials. However, the fairly complex crystal structure of A 14 MX 11 Zintl compounds renders the interpretation of the electronic band structure obscure, making it difficult to chemically guide band engineering and optimization efforts. In this work, we delineate the valence-balanced Zintl chemistry of A 14 MX 11 compounds using the molecular orbital theory. By analyzing the electronic band structures of Yb 14 MgSb 11 and Yb 14 AlSb 11 , we show that the conduction band minimum is composed of either an antibonding molecular orbital originating from the (Sb 3 ) 7– trimer or a mix of atomic orbitals of A, M, and X. The singly degenerate valence band is comprised of non-bonding Sb pz orbitals primarily from the Sb atoms in the (MSb 4 ) m– tetrahedra and of isolated Sb atoms distributed throughout the unit cell. Such a chemical understanding of the electronic structure enables strategies to engineer electronic properties (e.g., the bandgap) of A 14 MX 11 compounds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Experimental determination of the valence band offsets of ZnGeN 2 and (ZnGe) 0.94 Ga 0.12 N 2 with GaN

A predicted type-II staggered band alignment with an approximately 1.4 eV valence band offset at the ZnGeN 2 /GaN heterointerface has inspired novel band-engineered III-N/ZnGeN 2 heterostructure-based device designs for applications in high performance optoelectronics. We report on the determination of the valence band offset between metalorganic chemical vapor deposition grown (ZnGe) 1- x Ga 2 x N 2 , for x = 0 and 0.06, and GaN using x-ray photoemission spectroscopy. The valence band of ZnGeN 2 was found to lie 1.45–1.65 eV above that of GaN. This result agrees well with the value predicted by first-principles density functional theory calculations using the local density approximation for the potential profile and quasiparticle self-consistent GW calculations of the band edge states relative to the potential. For (ZnGe) 0.94 Ga 0.12 N 2 the value was determined to be 1.29 eV, ~10%–20% lower than that of ZnGeN 2 . The experimental determination of the large band offset between ZnGeN 2 and GaN provides promising alternative solutions to address challenges faced with pure III-nitride-based structures and devices.

Physics↗
DOE OSTI2022

Charge Separation in Monolayer WSe 2 by Strain Engineering: Implications for Strain-Induced Diode Action

Strain-engineering band structure in transition-metal dichalcogenides (TMDC) is a promising avenue toward capabilities in optoelectronics. For example, controlling the flow of optically generated quasiparticles can be achieved by a localized strain field which reduces the bandgap and generates an energy-band gradient that funnels neutral excitons to the strain apex. It would be even more advantageous to mimic a diode’s internal field, where both conduction and valence bands bend in the same direction, to separate electrons and holes. This can be achieved if the strain in the TMDC layer lowers both the conduction band minimum as well as the valence band maximum during strain-induced band narrowing. Here, we have used density functional theory (DFT) calculations of monolayer WSe 2 electronic structure under biaxial strain to show that WSe 2 has this property. In this work, to test the band bending experimentally, we combined localized strain with electrostatic doping to follow photoluminescence from excitons and positive or negative trions. In unstrained WSe 2 , both positive and negative trion emissions dominate over excitons away from charge neutrality. In contrast, for strained areas, negative trions accumulate, while positive trion emission is near zero away from charge neutrality, indicating a lack of holes. Hence, strain bends both conduction and valence bands down, similarly to the band bending in a PN-diode depletion region, providing an opportunity to separate electrons and holes via localized strain.

2D materials↗
DOE OSTI2024

High-gradient performance of a prototype accelerator cavity for a 3 GeV proton radiography booster

This paper reports the design, fabrication, and results of the high-gradient conditioning and testing for a two-cell, π -mode, standing wave normal-conducting prototype booster cavity for the proposed 3 GeV proton linac upgrade at Los Alamos Neutron Science Center. Increasing the energy of proton beam from the existing 800 MeV to 3 GeV will improve resolution of the proton radiography by up to 10 times. The proposed energy boost can be achieved with a compact normal-conducting high-gradient radio-frequency (rf) linac section. The C-band section of the booster linac was designed with optimized-shaped copper accelerator cavities with distributed rf coupling. A short two-cell test prototype structure was designed for the frequency of 5.712 GHz, fabricated, and tested at the C-band Engineering Research Test Facility in New Mexico (CERF-NM) at Los Alamos National Laboratory. The maximum klystron power coupled into the test structure was 8.3 MW with 1 μ s pulse length and 100 Hz repetition rate. The breakdown probabilities were recorded as functions of the accelerating gradient and peak surface fields. Operation of the test cavity at accelerating gradients of up to 100 MV / m was demonstrated. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Orientated Growth of Ultrathin Tellurium by van der Waals Epitaxy

Abstract Tellurium, as an elemental van der Waals semiconductor, has intriguing anisotropic physical properties owing to its inherent 1D crystal structure. To exploit the anisotropic and thickness‐dependent behavior, it is important to realize orientated growth of ultrathin tellurium. Here, van der Waals epitaxial growth of Te on the surface of 2D transition metal dichalcogenides is systematically investigated. Orientated growth of Te with a thickness down to 5 nm is realized on three‐fold symmetric substrates (WSe 2 , WS 2 , MoSe 2 , and MoS 2 ), where the atomic chains of Te are aligned with the armchair directions of substrates. 1D/2D moiré superlattices are observed for the Te/WSe 2 heterostructure. This method is extended to the growth of SeTe alloys, providing flexibility for band engineering. Finally, growth of textured Te film is demonstrated on the lower‐symmetry surface of WTe 2 .

Zhao, Chunsong↗
DOE OSTI2023

Photonics in Multimaterial Lateral Heterostructures Combining Group IV Chalcogenide van der Waals Semiconductors

Abstract Lateral heterostructures combining two multilayer group IV chalcogenide van der Waals semiconductors have attracted interest for optoelectronics, twistronics, and valleytronics, owing to their structural anisotropy, bulk‐like electronic properties, enhanced optical thickness, and vertical interfaces enabling in‐plane charge manipulation/separation, perpendicular to the trajectory of incident light. Group IV monochalcogenides support propagating photonic waveguide modes, but their interference gives rise to complex light emission patterns throughout the visible/near‐infrared range both in uniform flakes and single‐interface lateral heterostructures. Here, this work demonstrates the judicious integration of pure and alloyed monochalcogenide crystals into multimaterial heterostructures with unique photonic properties, notably the ability to select photonic modes with targeted discrete energies through geometric factors rather than band engineering. SnS‐GeS 1− x Se x ‐GeSe‐GeS 1− x Se x heterostructures with a GeS 1− x Se x active layer sandwiched laterally between GeSe and SnS, semiconductors with similar optical constants but smaller bandgaps, were designed and realized via sequential vapor transport synthesis. Raman spectroscopy, electron microscopy/diffraction, and energy‐dispersive X‐ray spectroscopy confirm a high crystal quality of the laterally stitched components with sharp interfaces. Nanometer‐scale cathodoluminescence spectroscopy provides evidence for a facile transfer of electron–hole pairs across the lateral interfaces and demonstrates the selection of photon emission at discrete energies in the laterally embedded active (GeS 1− x Se x ) part of the heterostructure.

2D layered crystals↗
DOE OSTI2020

Ligand-Dependent Tuning of Interband and Intersubband Transitions of Colloidal CdSe Nanoplatelets

Although surface ligands of colloidal nanocrystals are known to adjust the absolute energy levels of valence and conduction bands of semiconductor nanocrystals, they typically have only minor influence on the band gap or effective masses. This changes in nanoplatelets. Ligand exchange of CdSe colloidal nanoplatelets induces large (up to 300 meV) bathochromic shifts of both interband and intersubband transitions. Here, three families of ligands-halides, thiolates, and phosphonates-are used to tune interband transitions, reflecting electron and hole confinement, across visible wavelengths and intersubband transitions, reflecting electron confinement, across the near-infrared spectral window. Furthermore, careful examination shows that delocalization from expansion of the nanoplatelet short axis, which was reported previously, cannot alone explain observed red shifts. Instead, comparison of intersubband, interband, and hole energy levels shows that ligand head group chemistry confers specific, idiosyncratic adjustments of the contribution of conduction and valence bands to the observed bathochromic shifts. Phosphonate ligands show the largest band gap reductions but the smallest red shift of intersubband transition energies; halide-exchanged samples displayed smaller reductions in band gap but large red shifts of intersubband transitions; thiolates fall in between. A related specificity is observed in hole states, which implicates ligand-responsive valence band curvature as an additional contribution driving optical changes. For nanoplatelets, surface ligand chemistry offers not only a tool to adjust the absolute energy level of conduction and valence bands but also an alternative route to preferential electron or hole band engineering that is normally achieved with inorganic shells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗