Search NASA⌕ Search

SEARCH · Search NASA

Results for “band structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Three-dimensional nature of the band structure of ZrTe 5 measured by high-momentum-resolution photoemission spectroscopy [3D nature ZrTe 5 band structure measured by high-momentum-resolution photoemission spectroscopy]

Here, we have performed a systematic high-momentum-resolution photoemission study on ZrTe 5 using 6-eV photon energy. We have measured the band structure near the Γ point, and quantified the gap between the conduction and valence band as 18 ≤ Δ ≤ 29 meV. We have also observed photon-energy-dependent behavior attributed to final-state effects and the three-dimensional (3D) nature of the material's band structure. Our interpretation indicates the gap is intrinsic and reconciles discrepancies on the existence of a topological surface state reported by different studies. The existence of a gap suggests that ZrTe 5 is not a 3D strong topological insulator nor a 3D Dirac semimetal. Therefore, our experiment is consistent with ZrTe 5 being a 3D weak topological insulator.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure, optical property, and electronic band structure of cuprous oxide thin films

Cuprous oxide (Cu{sub 2}O) thin films were grown via radio frequency sputtering deposition at various temperatures. The dielectric functions and luminescence properties of the Cu{sub 2}O thin films were measured using spectroscopic ellipsometry and photoluminescence, respectively. High-energy peaks were observed in the photoluminescence spectra. Several critical points (CPs) were found using second derivative spectra of the dielectric functions and the standard critical point model. The electronic band structure and the dielectric functions were calculated using density functional theory, and the CP energies were estimated to compare with the experimental data. We identified the high-energy photoluminescence peaks to quasi-direct transitions which arose from the granular structures of the Cu{sub 2}O thin films.

36 MATERIALS SCIENCE↗

Intermetallic solid solution Fe{sub 1-x}Co{sub x}Ga{sub 3}: Synthesis, structure, NQR study and electronic band structure calculations

Unlimited solid solution Fe{sub 1-x}Co{sub x}Ga{sub 3} was prepared from Ga flux. Its crystal structure was refined for Fe{sub 0.5}Co{sub 0.5}Ga{sub 3} (P4{sub 2}/mnm, a=6.2436(9), c=6.4654(13), Z=4) and showed no ordering of the metal atoms. A combination of the electronic band structure calculations within the density functional theory (DFT) approach and {sup 69,71}Ga nuclear quadrupole resonance (NQR) spectroscopy clearly shows that the Fe-Fe and Co-Co dumbbells are preferred to the Fe-Co dumbbells in the crystals structure. The band structure features a band gap of about 0.4 eV, with the Fermi level crossing peaks of a substantial density of electronic states above the gap for x>0. The solid solution is metallic for x>0.025. The study of the nuclear spin-lattice relaxation shows that the rate of the relaxation, 1/T{sub 1}, is very sensitive to the Co concentration and correlates well with the square of the density of states at the Fermi level, N{sup 2}(E{sub F}). - Graphical abstract: Rate of the nuclear spin-lattice relaxation, 1/T{sub 1}, observed in the {sup 69}Ga NQR experiments for the intermetallic solid solution Fe{sub 1-x}Co{sub x}Ga{sub 3} is the highest for x=0.25 with the highest calculated density of electronic states at the Fermi level, N(E{sub F}); in general, 1/T{sub 1} correlates with N{sup 2}(E{sub F}). Highlights: Black-Right-Pointing-Pointer Fe{sub 1-x}Co{sub x}Ga{sub 3} solid solution is prepared in single crystalline form from Ga flux. Black-Right-Pointing-Pointer In the crystal structure Fe-Fe and Co-Co dumbbells are preferred to Fe-Co dumbbells. Black-Right-Pointing-Pointer Metal-to-semiconductor transition occurs at 0<x<0.025. Black-Right-Pointing-Pointer {sup 69,71}Ga NQR spectra efficiently probe local environment of two independent Ga atoms. Black-Right-Pointing-Pointer Rate of nuclear spin-lattice relaxation follows squared DOS at the Fermi level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloidal AInSe 2 (A = K, Rb, Cs) Nanocrystals with Tunable Crystal and Band Structures

Wide band gap AInSe 2 (A = K, Rb, Cs) is an important interlayer material for improving the efficiency of Cu(In,Ga)(S,Se) 2 (CIGS) solar cells. Compared to high-vacuum deposition and solid-state synthesis, a less energyintensive method is of interest for its fabrication. Herein, we present the rapid, low-temperature colloidal synthesis of AInSe 2 nanocrystals that opens a pathway for convenient solution processing. The crystal structures and electronic band structures of the nanocrystals were studied, and their particle morphology was found to be dependent on the choice of alkali metal and selenium precursors. Homogeneous solid solution (K,Rb,Cs)InSe 2 nanocrystals were synthesized using a mixture of alkali metal precursors. Their compositions, lattice parameters, and band gaps were easily tuned based on the K:Rb:Cs precursor ratio, providing potential for interface engineering of CIGS nanocrystal-based solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Band Structure of Strain-Balanced GaAsBi/GaAsN Super-lattices on GaAs

GaAs alloys with dilute content of Bi and N provide a large reduction in band-gap energy with increasing alloy composition. GaAsBi/GaAsN heterojunctions have a type-II band alignment, where superlattices based on these materials offer a wide range for designing effective band-gap energy by varying superlattice period and alloy composition. The miniband structure and effective band gap for strain-balanced GaAsBi/GaAsN superlattices with effective lattice match to GaAs are calculated for alloy compositions up to 5% Bi and N using the k·p method. The effective band gap for these superlattices is found to vary between 0.89 and 1.32 eV for period thickness ranging from 10 to 100 Å. The joint density of states and optical absorption of a 40/40 Å GaAs0.96Bi0.04/GaAs0.98N0.02 superlattice are reported demonstrating a ground-state transition at 1.005 eV and first excited transition at 1.074 eV. The joint density of states is similar in magnitude to GaAs, while the optical absorption is approximately one order of magnitude lower due to the spatially indirect optical transition in the type-II structure. The GaAsBi/GaAsN system may provide a new material system with lattice match to GaAs in a spectral range of high importance for optoelectronic devices including solar cells, photodetectors, and light emitters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First direct observation of a nearly ideal graphene band structure

Angle-resolved photoemission and x-ray diffraction experiments show that multilayer epitaxial graphene grown on the SiC(000{bar 1}) surface is a new form of carbon that is composed of effectively isolated graphene sheets. The unique rotational stacking of these films causes adjacent graphene layers to electronically decouple leading to a set of nearly independent linearly dispersing bands (Dirac cones) at the graphene K point. Each cone corresponds to an individual macroscale graphene sheet in a multilayer stack where AB-stacked sheets can be considered as low density faults.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic band structure of ZnO-rich highly mismatched ZnO{sub 1−x}Te{sub x} alloys

We synthesized ZnO{sub 1−x}Te{sub x} alloys with Te composition x < 0.23 by using pulsed laser deposition. Alloys with x < 0.06 are crystalline with a columnar growth structure while samples with higher Te content are polycrystalline with random grain orientation. Electron microscopy images show a random distribution of Te atoms with no observable clustering. We found that the incorporation of a small concentration of Te (x ∼ 0.003) redshifts the ZnO optical absorption edge by more than 1 eV. The minimum band gap obtained in this work is 1.8 eV for x = 0.23. The optical properties of the alloys are explained by the modification of the valence band of ZnO, due to the anticrossing interactions of the localized Te states with the ZnO valence band extended states. Hence, the observed large band gap reduction is primarily originating from the upward shift of the valence band edge. We show that the optical data can be explained by the band anticrossing model with the localized level of Te located at 0.95 eV above the ZnO valence band and the band anticrossing coupling constant of 1.35 eV. These parameters allow the prediction of the compositional dependence of the band gap as well as the conduction and the valence band offsets in the full composition range of ZnO{sub 1−x}Te{sub x} alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimal band structure for thermoelectrics with realistic scattering and bands

Abstract Understanding how to optimize electronic band structures for thermoelectrics is a topic of long-standing interest in the community. Prior models have been limited to simplified bands and/or scattering models. In this study, we apply more rigorous scattering treatments to more realistic model band structures—upward-parabolic bands that inflect to an inverted-parabolic behavior—including cases of multiple bands. In contrast to common descriptors (e.g., quality factor and complexity factor), the degree to which multiple pockets improve thermoelectric performance is bounded by interband scattering and the relative shapes of the bands. We establish that extremely anisotropic “flat-and-dispersive” bands, although best-performing in theory, may not represent a promising design strategy in practice. Critically, we determine optimum bandwidth, dependent on temperature and lattice thermal conductivity, from perfect transport cutoffs that can in theory significantly boost z T beyond the values attainable through intrinsic band structures alone. Our analysis should be widely useful as the thermoelectric research community eyes z T > 3.

97 MATHEMATICS AND COMPUTING↗

Interface Structure, Band Alignment, and Built-In Potentials at LaFeO 3 / n - SrTiO 3 Heterojunctions

We demonstrate that LaFeO 3 /n-SrTiO 3 (001) heterojunctions engineered to have opposite interface polarities exhibit very similar band offsets and built-in potentials within the LaFeO 3 layer of the same sign. However, heterojunctions with the TiO20-LaO+ interface structure attract electronic charge from the n-STO substrate, whereas those with the SrO0-FeO2-1 interface structure do not. These results suggest that the latter would more effectively facilitate photogenerated electron-hole pair separation than the former, an important result for photoelectrochemical water splitting

36 MATERIALS SCIENCE↗