Search NASA⌕ Search

SEARCH · Search NASA

Results for “band-to-band”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

ALMA Band-to-band Phase Referencing: Imaging Capabilities on Long Baselines and High Frequencies

High-frequency long-baseline experiments with the Atacama Large Millimeter/submillimeter Array were organized to test the high angular resolution imaging capabilities in the submillimeter wave regime using baselines up to 16 km. Four experiments were conducted, two Band 7 (289 GHz) and two Band 8 (405 GHz) observations. Phase correction using band-to-band (B2B) phase referencing was used with a phase calibrator only [[Formula]] away observed in Band 3 (96 GHz) and Band 4 (135 GHz), respectively. In Band 8, we achieved the highest resolution of 14 × 11 mas. We compared the synthesis images of the target quasar using 20 and 60 s switching cycle times in the phase referencing. In Band 7, the atmosphere had good stability in phase rms (<0.5 rad over 2 minutes), and there was little difference in image coherence between the 20 and 60 s switching cycle times. One Band 8 experiment was conducted under a worse phase rms condition (>1 rad over 2 minutes), which led to a significantly reduced coherence when using the 60 s switching cycle time. One of our four experiments indicates that the residual phase rms error after phase referencing can be reduced to 0.16 rad at 289 GHz in using the 20 s switching cycle time. Such conditions would meet the phase correction requirement of image coherence of >70% in Band 10, assuming a similar phase calibrator separation angle, emphasizing the need for such B2B phase referencing observing at high frequencies.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1972

Apollo 9 multiband photography experiment S065

Fourier analysis was applied to microdensitometer scans of a selected region of one SO65 frame in each of the three black-and-white bands. The approach was unique because a somewhat arbitrary section of the image was used and not limited to available targets as in edge analysis. Comparison of duplicates and calculation of absolute SO65 MTF were done by applying linear systems theory to the spatial spectra of the image scans. It was found that the duplication process was nonlinear and resulted in general amplification of spatial frequency modulation. However, the increase in modulation was offset by a corresponding increase in the granularity of the copies. The amount of increase seemed to be related to the initial granularity, but a direct relationship was not verified. Band-to-band comparison of image quality was achieved in the form of signal-to-noise ratio curves as a function of spatial frequency for each band. From this standpoint the DD band was an order of magnitude better than the other two. These were several factors that restricted the analysis of the Apollo 9 imagery. Among these were the lack of precise sensitometric and optical system data on the high altitude photography. In addition it was determined that there was only one simultaneous pair of high altitude and SO65 frames. Finally, the original SO65 photography was not available for scanning (for obvious reasons), thus eliminating a reference base for granularity and SO65 MTF determination.

Schowengerdt, R. A.↗
NASA NTRS1971

G-r noise for Auger band-to-band processes.

Expressions for band-to-band Auger recombination, including the effects of photoinduced carriers in intrinsic photoconductors, are presented. They show good agreement with the expressions published by van Vliet (1958) and Long (1967) for g-r noise in intrinsic photoconductors for the case of band-to-band radiative recombination.

Breitzer, D.↗
NASA NTRS1973

Monitoring the vernal advancement and retrogradation (green wave effect) of natural vegetation

The author has identified the following significant results. A comprehensive review of ERTS-1 MSS color composite imagery, obtained during the autumnal and vernal phases over the Great Plains Corridor test sites, shows that temporal changes in rangeland vegetation can be manually interpreted. The degree to which manual interpretations can be made from the MSS color composites appears to be limited primarily by variations in image reproduction quality. The vernal advancement and other phenophase related phenomena are observable from cycle to cycle and within a single frame for rangeland vegetation. Vegetation changes due to environmental conditions among the test sites and among grazing treatments within test sites are readily observable. An investigation has been initiated which will evaluate band-to-band ratios as an index of rangeland vegetation condition. Data currently available from August 1972 through April 1973 for the five southern test sites are being used to characterize band-to-band ratios as a function of quantity and quality of rangeland vegetation at each of the test sites.

Rouse, J. W., Jr.↗
NASA NTRS1973

Phenology satellite experiment

The author has identified the following significant results. The 1972 Brown Wave and 1973 Green Wave were detected at 24 sites located in four north-south corridors across the United States through analysis of ERTS-1 imagery and multispectral scanner digital tapes. Ground observations from these sites were correlated with ERTS data. These two phenological events were documented by observations from more than 3200 sites across the United States. The problem of changing atmospheric and illumination conditions were studied and corrections to ERTS data suggested. Band-to-band ratios were developed and correlated with the fall and spring phenological changes in field crops and forests. The results to date show the feasibility of developing and refining phenoclimatic models for use in characterizing crop status and as an aid to yield prediction.

Dethier, B. E.↗
NASA NTRS1975

Seasonal vegetation differences from ERTS imagery

Knowledge of the times when crop and forest vegetation experience seasonally related changes in development is important in understanding growth and yield relationships. This article describes how densitometry of earth resources technology satellite (ERTS-1) multispectral scanner (MSS) imagery can be used to identify such phenological events. Adjustments for instrument calibration, aperture size, gray-scale differences between overpasses, and normalization of changing solar elevation are considered in detail. Seasonal vegetation differences can be identified by densitometry of band 5 (0.6-0.7 microns) and band 7 (0.8-1.1 microns) MSS imagery. Band-to-band ratios of the densities depicted the changes more graphically than the individual band readings.

Ashley, M. D.↗
NASA NTRS1975

The four- and five-band multispectral scanners for Landsat

The earth resources sensing Multispectral Scanner (MSS) for the Landsat satellite has two versions; one with four spectral bands from 0.5 to 1.1 microns, and one with five bands, the added band being 10.4 to 12.6 microns. This paper describes optical design and performance. The instrument uses a flat, object-space scanning mirror of near-linear motion, with a sensitive optical position monitor to detect mirror angular position. The 22.9-cm aperture telescope images the scene on an array of fiber optics, which dissect and transmit the scene energy to photomultiplier tubes detecting in Bands 1, 2, and 3, and silicon photodiodes detecting Band 4. Band 5 energy passes the fiber optic assembly and is reimaged on a radiatively cooled mercury cadmium telluride (HgCdTe) detector. The orbiting four-band scanner is furnishing data registered to better than 50-m band-to-band and resolving 80-m repetitive pattern over a 185-km swath width from 907-km altitude.

Lansing, J. C., Jr.↗
NASA NTRS1976

InSb arrays with CCD readout for 1.0- to 5.5-microns infrared applications

There were two approaches for fabricating indium antimonide (InSb) arrays with CCD readout discussed. The hybrid approach integrated InSb detectors and silicon CCDs in a modular assembly via an advanced interconnection technology. In the monolithic approach, the InSb infrared detectors and the CCD readout were integrated on the same InSb chip. Both approaches utilized intrinsic (band-to-band) photodetection with the attendant advantages over extrinsic detectors. The status of each of these detector readout concepts, with pertinent performance characteristics, was presented.

Phillips, J. D.↗
NASA NTRS1977

Detection of alteration associated with a porphyry copper deposit in southern Arizona

Computer processing of Landsat MSS data was performed using contrast stretching and band-to-band ratioing. A false color ratio composite picture showed color anomalies which coincided with known areas of alteration on and about Red Mountain. A helicopter survey of the study area was undertaken using a portable field reflectance spectrometer. One hundred fifty-six spectra were obtained in the 0.4 to 2.5 micrometer wavelength region. The spectra were digitized, and contour maps for 24 wavelength intervals were produced; no spectral anomalies were evident for the known altered areas. A contour map produced from the 1.6 and 2.2 micrometer ratio generally delineated the alteration areas. The 1.3, 1.6, and 2.2 micrometer wavelength data were canonically transformed using a transformation empirically derived from discriminant function analysis of altered and unaltered materials for the Goldfield, Nevada region, and a contour map was produced for the first canonical variable. The known areas of alteration were clearly defined on the contour map.

Abrams, M. J.↗
NASA NTRS1978

Infrared photoresponse of silicon devices at 1.15 microns

The photoconductive absorption of silicon devices at 1.15 microns is through band-to-band transitions with the simultaneous absorption of a 57.7 meV phonon. Its temperature dependence arises both from the changing phonon population and, more significantly, from the change in silicon bandgap with temperature. The temperature dependence of the photoresponse of quasi-intrinsic silicon samples is in good agreement with the optical absorption data of Macfarlane et al. More heavily doped silicon devices show a photoresponse extending to a lower temperature and having a smaller temperature dependence than intrinsic silicon. This is explained in terms of bandgap narrowing. Comparison with theoretical curves enables the resolution of bandgap reductions at the meV level.

Lanyon, H. P. D.↗
NASA NTRS1980

Thematic Mapper - An interim report on anticipated performance

The requirements and design concept of the Thematic Mapper are briefly reviewed. Emphasis is placed on the anticipated on-orbit performance based on subsystem and system level test results obtained from Engineering Model and Protoflight Model hardware. The anticipated performance of the Thematic Mapper is discussed in four key areas: spectral response, radiometric sensitivity, square-wave response, and band-to-band registration.

Engel, J. L.↗
NASA NTRS1981

Cathodoluminescence of InP

Cathodoluminescence studies were carried out on p-type InP having carrier concentrations ranging from 7.2 x 10 to the 16th to 7.4 x 10 to the 18th per cu cm in the temperature range of 80-580 K. It was found that low-temperature spectra exhibited peaks at 1.41 and 1.38 eV. These peaks were attributed to band-to-band and band-acceptor transitions, respectively. The dependence of the band-to-band peak on temperature was used to extend knowledge of the temperature dependence of the energy gap of InP to 550 K. It was shown that the half-width of the cathodoluminescence peak can be used for the determination of carrier concentration and carrier-concentration inhomogeneities in the material. The variations of the cathodoluminescence peak height with temperature indicated the possibility of Auger recombination for high carrier concentrations (7.4 x 10 to the 18th per cu cm) at temperatures above 450 K.

Gatos, C. H.↗
NASA NTRS1980

Alignment techniques required by precise measurement of effective focal length

The characteristics of false color imagery produced by instrumentation on earth resource mapping satellites are examined. The spatial fidelity of the imagery is dependent upon the geometric accuracy (GA) and the band-to-band registration (BBR) with which the telescope instrument is assembled. BBR and GA require knowledge of telescope effective focal length (EFL) to one part in 10,000 in order that the next generation of earth mappers be able to carry out their missions. The basis for this level of precision is briefly considered, and a description is given of the means by which such precise EFL measurements have been carried out. Attention is given to accuracy requirements, the technique used to measure effective focal length, possible sources of error in the EFL measurement, approaches for eliminating errors, and the results of the efforts to control measurement errors in EFL determinations.

Wise, T. D.↗
NASA NTRS1982

A quantitative applications-oriented evaluation of Thematic Mapper design specifications

Simulated Thematic Mapper data sets were created from aircraft Multispectral Scanner data in order to predict the sensitivity of applications-oriented classification results to variations in selected sensor parameters. It was found that band-to-band misregistration as little as 0.3 pixel can have a pronounced effect on the classification of both field-center pixels and pixels associated with edges and small objects in the scene. It was also determined that a significant improvement in classification accuracy could be achieved if the resolution of the thermal band of the Thematic Mapper were comparable to the resolution of its other spectral bands.

Swain, P. H.↗
NASA NTRS1983

Geometric and radiometric characterization of LANDSAT-D thematic mapper and multispectral scanner data

A geometrically raw image of Washington, D.C. was acquired and radiometrically corrected. The data show little of the detector stripping common in earlier MSS images. The radiometrically corrected data have uniform means and standard deviations for the detectors in each band; however, the data for different detectors utilize a different pattern of DN levels, resulting in ubiquitous stripping of 1 DN amplitude. Band-to-band registration was assessed using color composites and small area correlation techniques. The spectral equivalency of the first four bands of the thematic mapper with the four bands of the MSS is being examined. Geometric analysis of the Washington, D.C. scene have started and a generalized routine for examining the contents of the label files and nonvideo data files was implemented. Several discrepancies from the documentation are described. Night scenes and daytime ocean scenes required for radiometric purposes were identified and the data ordered.

Kieffer, H. H.↗
NASA NTRS1983

Evaluation of LANDSAT-4 TM and MSS ground segment geometry performance without ground control

The along-line one dimensional FFT algorithm was successfully used to test band-to-band, swath-to-swath, and inter-swath registration of a Washington, D.C. scene. Analysis of the tabulated and plotted results of the MSS and TM P-data shows that a slow spacecraft roll condition of under one hertz exists in this scene. Characteristics of the data for both instruments are listed.

Source record↗
NASA NTRS1983

Assessment of Thematic Mapper band-to-band registration by the block correlation method

Rectangular blocks of pixels from one band image were statistically correlated against blocks centered on identical pixels from a second band image. The block pairs were shifted in pixel increments both vertically and horizontally with respect to each other and the correlation coefficient to the maximum correlation was taken as the best estimate of registration error for each block pair. For the band combinations of the Arkansas scene studied, the misregistration of TM spectral bands within the noncooled focal plane lie well within the 0.2 pixel target specification. Misregistration between the middle IR bands is well within this specification also. The thermal IR band has an apparent misregistration with TM band 7 of approximately 3 pixels in each direction. The TM band 3 has a misregistration of approximately 0.2 pixel in the across-scan direction and 0.5 pixel in the along-scan direction, with both TM bands 5 and 7.

Card, D. H.↗