Search NASA⌕ Search

SEARCH · Search NASA

Results for “bandstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Topological surface currents accessed through reversible hydrogenation of the three-dimensional bulk

Hydrogen, the smallest and most abundant element in nature, can be efficiently incorporated within a solid and drastically modify its electronic and structural state. In most semiconductors interstitial hydrogen binds to defects and is known to be amphoteric, namely it can act either as a donor (H + ) or an acceptor (H - ) of charge, nearly always counteracting the prevailing conductivity type. Here we demonstrate that hydrogenation resolves an outstanding challenge in chalcogenide classes of three-dimensional (3D) topological insulators and magnets — the control of intrinsic bulk conduction that denies access to quantum surface transport, imposing severe thickness limits on the bulk. With electrons donated by a reversible binding of H + ions to Te(Se) chalcogens, carrier densities are reduced by over 10 20 cm -3 , allowing tuning the Fermi level into the bulk bandgap to enter surface/edge current channels without altering carrier mobility or the bandstructure. The hydrogen-tuned topological nanostructures are stable at room temperature and tunable disregarding bulk size, opening a breadth of device platforms for harnessing emergent topological states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of a phase transition within the domain walls of ferromagnetic Co3Sn2S2

Abstract The ferromagnetic phase of Co 3 Sn 2 S 2 is widely considered to be a topological Weyl semimetal, with evidence for momentum-space monopoles of Berry curvature from transport and spectroscopic probes. As the bandstructure is highly sensitive to the magnetic order, attention has focused on anomalies in magnetization, susceptibility and transport measurements that are seen well below the Curie temperature, leading to speculation that a “hidden” phase coexists with ferromagnetism. Here we report spatially-resolved measurements by Kerr effect microscopy that identify this phase. We find that the anomalies coincide with a deep minimum in domain wall (DW) mobility, indicating a crossover between two regimes of DW propagation. We demonstrate that this crossover is a manifestation of a 2D phase transition that occurs within the DW, in which the magnetization texture changes from continuous rotation to unidirectional variation. We propose that the existence of this 2D transition deep within the ferromagnetic state of the bulk is a consequence of a giant quality factor for magnetocrystalline anisotropy unique to this compound. This work broadens the horizon of the conventional binary classification of DWs into Bloch and Néel walls, and suggests new strategies for manipulation of domain walls and their role in electron and spin transport.

36 MATERIALS SCIENCE↗

A microscopic Kondo lattice model for the heavy fermion antiferromagnet CeIn 3

Electrons at the border of localization generate exotic states of matter across all classes of strongly correlated electron materials and many other quantum materials with emergent functionality. Heavy electron metals are a model example, in which magnetic interactions arise from the opposing limits of localized and itinerant electrons. This remarkable duality is intimately related to the emergence of a plethora of novel quantum matter states such as unconventional superconductivity, electronic-nematic states, hidden order and most recently topological states of matter such as topological Kondo insulators and Kondo semimetals and putative chiral superconductors. The outstanding challenge is that the archetypal Kondo lattice model that captures the underlying electronic dichotomy is notoriously difficult to solve for real materials. Here we show, using the prototypical strongly-correlated antiferromagnet CeIn 3 , that a multi-orbital periodic Anderson model embedded with input from ab initio bandstructure calculations can be reduced to a simple Kondo-Heisenberg model, which captures the magnetic interactions quantitatively. We validate this tractable Hamiltonian via high-resolution neutron spectroscopy that reproduces accurately the magnetic soft modes in CeIn 3 , which are believed to mediate unconventional superconductivity. Our study paves the way for a quantitative understanding of metallic quantum states such as unconventional superconductivity.

36 MATERIALS SCIENCE↗

Many-body enhancement of high-harmonic generation in monolayer MoS2

Abstract Many-body effects play an important role in enhancing and modifying optical absorption and other excited-state properties of solids in the perturbative regime, but their role in high harmonic generation (HHG) and other nonlinear response beyond the perturbative regime is not well-understood. We develop here an ab initio many-body method to study nonperturbative HHG based on the real-time propagation of the non-equilibrium Green’s function with the GW self energy. We calculate the HHG of monolayer MoS 2 and obtain good agreement with experiment, including the reproduction of characteristic patterns of monotonic and nonmonotonic harmonic yield in the parallel and perpendicular responses, respectively. Here, we show that many-body effects are especially important to accurately reproduce the spectral features in the perpendicular response, which reflect a complex interplay of electron-hole interactions (or exciton effects) in tandem with the many-body renormalization and Berry curvature of the independent quasiparticle bandstructure.

36 MATERIALS SCIENCE↗

pyGWBSE: a high throughput workflow package for GW-BSE calculations

Abstract We develop an open-source python workflow package, py GWBSE to perform automated first-principles calculations within the GW-BSE (Bethe-Salpeter) framework. GW-BSE is a many body perturbation theory based approach to explore the quasiparticle (QP) and excitonic properties of materials. GW approximation accurately predicts bandgaps of materials by overcoming the bandgap underestimation issue of the more widely used density functional theory (DFT). BSE formalism produces absorption spectra directly comparable with experimental observations. py GWBSE package achieves complete automation of the entire multi-step GW-BSE computation, including the convergence tests of several parameters that are crucial for the accuracy of these calculations. py GWBSE is integrated with Wannier90 , to generate QP bandstructures, interpolated using the maximally-localized wannier functions. py GWBSE also enables the automated creation of databases of metadata and data, including QP and excitonic properties, which can be extremely useful for future material discovery studies in the field of ultra-wide bandgap semiconductors, electronics, photovoltaics, and photocatalysis.

36 MATERIALS SCIENCE↗

Diffraction line-shapes, Fermi surface nesting, and quantum criticality in antiferromagnetic chromium at high pressure.

We explore the behavior of the nested bandstructure of chromium as a function of temperature and pressure to the point where magnetism disappears. X-ray diffraction measurements of the charge order parameter suggest that the nesting condition is maintained at high pressure, where the spin density wave ground state is destabilized by a continuous quantum phase transition. By comparing diffraction line-shapes measured throughout the temperature-pressure phase diagram we are able to identify and describe three regimes: thermal near-critical, weak coupling ground state, and quantum critical.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Finite difference method for solving the Schroedinger equation with band nonparabolicity in mid-infrared quantum cascade lasers

The nonparabolic Schroedinger equation for electrons in quantum cascade lasers (QCLs) is a cubic eigenvalue problem (EVP) which cannot be solved directly. While a method for linearizing this cubic EVP has been proposed in principle for quantum dots [Hwang et al., Math. Comput. Modell., 40, 519 (2004)] it was deemed too computationally expensive because of the three-dimensional geometry under consideration. We adapt this linearization approach to the one-dimensional geometry of QCLs, and arrive at a direct and exact solution to the cubic EVP. The method is then compared with the well established shooting method, and it is shown to be more accurate and reliable for calculating the bandstructure of mid-infrared QCLs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Increased photoluminescence of strain-reduced, high-Sn composition Ge{sub 1-x}Sn{sub x} alloys grown by molecular beam epitaxy

We synthesized up to Ge{sub 0.914}Sn{sub 0.086} alloys on (100) GaAs/In{sub y}Ga{sub 1-y}As buffer layers using molecular beam epitaxy. The buffer layers enable engineered control of strain in the Ge{sub 1-x}Sn{sub x} layers to reduce strain-related defects and precipitation. Samples grown under similar conditions show a monotonic increase in the integrated photoluminescence (PL) intensity as the Sn composition is increased, indicating changes in the bandstructure favorable for optoelectronics. We account for bandgap changes from strain and composition to determine a direct bandgap bowing parameter of b = 2.1 {+-} 0.1. According to our models, these are the first Ge{sub 1-x}Sn{sub x} samples that are both direct-bandgap and exhibit PL.

36 MATERIALS SCIENCE↗

Intrinsic ultrathin topological insulators grown via molecular beam epitaxy characterized by in-situ angle resolved photoemission spectroscopy

We demonstrate the capability of growing high quality ultrathin (10 or fewer quintuple layers) films of the topological insulators Bi{sub 2}Se{sub 3} and Bi{sub 2}Te{sub 3} using molecular beam epitaxy. Unlike previous growth techniques, which often pin the Fermi energy in the conduction band for ultrathin samples, our samples remain intrinsic bulk insulators. We characterize these films using in-situ angle resolved photoemission spectroscopy, which is a direct probe of bandstructure, and ex-situ atomic force microscopy. We find that the conduction band lies above the Fermi energy, indicating bulk insulating behavior with only the surface states crossing the Fermi energy. The use of a thermal cracker allows for more stoichiometric flux rates during growth, while still creating intrinsically doped films, paving the way for future improvements in growth of topological insulators.

36 MATERIALS SCIENCE↗

Feasibility study of electron transfer quantum well infrared photodetectors for spectral tuning in the long-wave infrared band

An electron transfer quantum well infrared photodetector (QWIP) consisting of repeating units of two coupled quantum wells (QWs) is capable of exhibiting a two color voltage dependent spectral response. However, significant electron transfer between the coupled QWs is required for spectral tuning, which may require the application of relatively high electric fields. Also, the band structure of coupled quantum wells is more complicated in comparison to a regular quantum well and, therefore, it is not always obvious if an electron transfer QWIP can be designed such that it meets specific performance characteristics. This paper presents a feasibility study of the electron transfer QWIP and its suitability for spectral tuning. Self consistent calculations have been performed of the bandstructure and the electric field that results from electron population within the quantum wells, from which the optical characteristics have been obtained. The band structure, spectral response, and the resonant final state energy locations have been compared with standard QWIPs. It is shown that spectral tuning in the long-wave infrared band can be achieved over a wide wavelength range of several microns while maintaining a relatively narrow spectral response FWHM. However, the total absorption strength is more limited in comparison to a standard QWIP, since the higher QW doping densities require much higher electric fields for electron transfer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Recent progress in III-V based ferromagnetic semiconductors: Band structure, Fermi level, and tunneling transport

Spin-based electronics or spintronics is an emerging field, in which we try to utilize spin degrees of freedom as well as charge transport in materials and devices. While metal-based spin-devices, such as magnetic-field sensors and magnetoresistive random access memory using giant magnetoresistance and tunneling magnetoresistance, are already put to practical use, semiconductor-based spintronics has greater potential for expansion because of good compatibility with existing semiconductor technology. Many semiconductor-based spintronics devices with useful functionalities have been proposed and explored so far. To realize those devices and functionalities, we definitely need appropriate materials which have both the properties of semiconductors and ferromagnets. Ferromagnetic semiconductors (FMSs), which are alloy semiconductors containing magnetic atoms such as Mn and Fe, are one of the most promising classes of materials for this purpose and thus have been intensively studied for the past two decades. Here, we review the recent progress in the studies of the most prototypical III-V based FMS, p-type (GaMn)As and its heterostructures with focus on tunneling transport, Fermi level, and bandstructure. Furthermore, we cover the properties of a new n-type FMS, (In,Fe)As, which shows electron-induced ferromagnetism. These FMS materials having zinc-blende crystal structure show excellent compatibility with well-developed III-V heterostructures and devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunnel-injection quantum dot deep-ultraviolet light-emitting diodes with polarization-induced doping in III-nitride heterostructures

Efficient semiconductor optical emitters in the deep-ultraviolet spectral window are encountering some of the most deep rooted problems of semiconductor physics. In III-Nitride heterostructures, obtaining short-wavelength photon emission requires the use of wide bandgap high Al composition AlGaN active regions. High conductivity electron (n-) and hole (p-) injection layers of even higher bandgaps are necessary for electrical carrier injection. This approach requires the activation of very deep dopants in very wide bandgap semiconductors, which is a difficult task. In this work, an approach is proposed and experimentally demonstrated to counter the challenges. The active region of the heterostructure light emitting diode uses ultrasmall epitaxially grown GaN quantum dots. Remarkably, the optical emission energy from GaN is pushed from 365 nm (3.4 eV, the bulk bandgap) to below 240 nm (>5.2 eV) because of extreme quantum confinement in the dots. This is possible because of the peculiar bandstructure and band alignments in the GaN/AlN system. This active region design crucially enables two further innovations for efficient carrier injection: Tunnel injection of carriers and polarization-induced p-type doping. The combination of these three advances results in major boosts in electroluminescence in deep-ultraviolet light emitting diodes and lays the groundwork for electrically pumped short-wavelength lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Above-bandgap optical properties of biaxially strained GeSn alloys grown by molecular beam epitaxy

The complex dielectric function of biaxially strained Ge{sub 1−x}Sn{sub x} (0 ≤ x ≤ 0.17) alloys grown on Ge (100) has been determined by spectroscopic ellipsometry from 1.2 to 4.7 eV. The effect of substitutional Sn incorporation and the epitaxial strain on the energy transitions E{sub 1}, E{sub 1} + Δ{sub 1}, E{sub 0}′, and E{sub 2} of GeSn alloys is investigated. Our results indicate that the strained GeSn alloys show Ge-like electronic bandstructure with all the transitions shifted downward due to the alloying of Sn. The strain dependence of E{sub 1} and E{sub 1} + Δ{sub 1} transitions is explained using the deformation potential theory, and values of −5.4 ± 0.4 eV and 3.8 ± 0.5 eV are obtained for the hydrostatic and shear deformation potentials, respectively.

36 MATERIALS SCIENCE↗

Coulomb impurity scattering in topological insulator thin films

Inter-surface coupling in thin-film topological insulators can reduce the surface state mobility by an order of magnitude in low-temperature transport measurements. The reduction is caused by a reduction in the group velocity and an increased s{sub z} component of the surface-state spin which weakens the selection rule against large-angle scattering. An intersurface potential splits the degenerate bands into a Rashba-like bandstructure. This reduces the intersurface coupling, it largely restores the selection rule against large angle scattering, and the ring-shaped valence band further reduces backscattering by requiring, on average, larger momentum transfer for backscattering events. The effects of temperature, Fermi level, and intersurface potential on the Coulomb impurity scattering limited mobility are analyzed and discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative analysis of hole transport in compressively strained InSb and Ge quantum well heterostructures

Compressively strained InSb (s-InSb) and Ge (s-Ge) quantum well heterostructures are experimentally studied, with emphasis on understanding and comparing hole transport in these two-dimensional confined heterostructures. Magnetotransport measurements and bandstructure calculations indicate 2.5× lower effective mass for s-InSb compared to s-Ge quantum well at 1.9 × 10{sup 12} cm{sup –2}. Advantage of strain-induced m* reduction is negated by higher phonon scattering, degrading hole transport at room temperature in s-InSb quantum well compared to s-Ge heterostructure. Consequently, effective injection velocity is superior in s-Ge compared to s-InSb. These results suggest s-Ge quantum well heterostructure is more favorable and promising p-channel candidate compared to s-InSb for future technology node.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gated Si nanowires for large thermoelectric power factors

We investigate the effect of electrostatic gating on the thermoelectric power factor of p-type Si nanowires (NWs) of up to 20 nm in diameter in the [100], [110], and [111] crystallographic transport orientations. We use atomistic tight-binding simulations for the calculation of the NW electronic structure, coupled to linearized Boltzmann transport equation for the calculation of the thermoelectric coefficients. We show that gated NW structures can provide ∼5× larger thermoelectric power factor compared to doped channels, attributed to their high hole phonon-limited mobility, as well as gating induced bandstructure modifications which further improve mobility. Despite the fact that gating shifts the charge carriers near the NW surface, surface roughness scattering is not strong enough to degrade the transport properties of the accumulated hole layer. The highest power factor is achieved for the [111] NW, followed by the [110], and finally by the [100] NW. As the NW diameter increases, the advantage of the gated channel is reduced. We show, however, that even at 20 nm diameters (the largest ones that we were able to simulate), a ∼3× higher power factor for gated channels is observed. Our simulations suggest that the advantage of gating could still be present in NWs with diameters of up to ∼40 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tunable ultrasonic phononic crystal controlled by infrared radiation

A tunable phononic crystal based ultrasonic filter was designed by stimulating the phase of the polymeric material embedded in a periodic structure using infrared radiation. The acoustic filter can be tuned remotely using thermal stimulation induced by the infrared radiation. The filter is composed of steel cylinder scatterers arranged periodically in a background of bulk poly (N-isopropylacrylamide) polymer hydrogel. The lattice structure creates forbidden bands for certain sets of mechanical waves that cause it to behave as an ultrasonic filter. Since the bandstructure is determined by not only the arrangement of the scatterers but also the physical properties of the materials composing the scatterers and background, modulating either the arrangement or physical properties will alter the effect of the crystal on propagating mechanical waves. Here, the physical properties of the filter are varied by inducing changes in the polymer hydrogel using an electromagnetic thermal stimulus. With particular focus on the k{sub 00}-wave, the transmission of ultrasonic wave changes by as much as 20 dBm, and band widths by 22% for select bands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the role of disorder on graphene and graphene nanoribbon-based vertical tunneling transistors

In this work, the characteristics of vertical tunneling field-effect transistors based on graphene (VTGFET) and graphene nanoribbon heterostructure (VTGNRFET) in the presence of disorder are theoretically investigated. An statistical analysis based on an atomistic tight-binding model for the electronic bandstructure along with the non-equilibrium Green's function formalism are employed. We study the dependence of the averaged density of states, transmission probability, on- and off-state conductances, on/off conductance ratio, and transfer characteristics on the substrate induced potential fluctuations and vacancies. In addition, the variabilities of the device characteristics due to the presence of disorder are evaluated. It can be inferred from the results that while introducing vacancies cause a relatively modest suppression of the transmission probability, potential fluctuations lead to the significant increase of transmission probability and conductance of the device. Moreover, the results show that the transport properties of VTGFET are more robust against disorder compared to VTGNRFET.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗