Search NASA⌕ Search

SEARCH · Search NASA

Results for “breathing mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Stroboscopic ultrafast imaging using RF strip-lines in a commercial transmission electron microscope

The development of ultrafast electron microscopy (UEM), specifically stroboscopic imaging, has brought the study of structural dynamics to a new level by overcoming the spatial limitations of ultrafast spectroscopy and the temporal restrictions of traditional TEM simultaneously. Combining the concepts governing both techniques has enabled direct visualization of dynamics with spatiotemporal resolutions in the picosecond-nanometer regime. Here, in this study, we push the limits of imaging using a pulsed electron beam via RF induced transverse deflection based on the newly developed 200 keV frequency-tunable strip-line pulser. We demonstrate 0.2 nm spatial resolution at high magnifications and elucidation of Lorentz imaging using the phase-microscopy method. We also present beam coherence measurements and expand our study using the breathing modes of a silicon interdigitated comb under RF excitation which achieves improved temporal synchronization between the electron pulse-train and electric field. A new RF holder has also been developed with impedance matching to the RF signal to minimize transmission power loss to samples and its performance is compared with a conventional sample holder.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Resonance-Enhanced Excitation of Interlayer Vibrations in Atomically Thin Black Phosphorus

The strength of interlayer coupling critically affects the physical properties of 2D materials such as black phosphorus (BP), where the electronic structure depends sensitively on layer thickness. Rigid-layer vibrations reflect directly the interlayer coupling strength in 2D van der Waals solids, but measurement of these characteristic frequencies is made difficult by sample instability and small Raman scattering cross sections in atomically thin elemental crystals. Here, we overcome these challenges in BP by performing resonance-enhanced low-frequency Raman scattering under an argon-protective environment. Interlayer breathing modes for atomically thin BP were previously unobservable under conventional (nonresonant) excitation but became strongly enhanced when the excitation energy matched the sub-band electronic transitions of few-layer BP, down to bilayer thicknesses. The measured out-of-plane interlayer force constant was found to be 10.1 × 10 19 N/m 3 in BP, which is comparable to graphene. Accurate characterization of the interlayer coupling strength lays the foundation for future exploration of BP twisted structures and heterostructures.

interlayer interaction↗
DOE OSTI2024

Environmental damping and vibrational coupling of confined fluids within isolated carbon nanotubes

Abstract Because of their large surface areas, nanotubes and nanowires demonstrate exquisite mechanical coupling to their surroundings, promising advanced sensors and nanomechanical devices. However, this environmental sensitivity has resulted in several ambiguous observations of vibrational coupling across various experiments. Herein, we demonstrate a temperature-dependent Radial Breathing Mode (RBM) frequency in free-standing, electron-diffraction-assigned Double-Walled Carbon Nanotubes (DWNTs) that shows an unexpected and thermally reversible frequency downshift of 10 to 15%, for systems isolated in vacuum. An analysis based on a harmonic oscillator model assigns the distinctive frequency cusp, produced over 93 scans of 3 distinct DWNTs, along with the hyperbolic trajectory, to a reversible increase in damping from graphitic ribbons on the exterior surface. Strain-dependent coupling from self-tensioned, suspended DWNTs maintains the ratio of spring-to-damping frequencies, producing a stable saturation of RBM in the low-tension limit. In contrast, when the interior of DWNTs is subjected to a water-filling process, the RBM thermal trajectory is altered to that of a Langmuir isobar and elliptical trajectories, allowing measurement of the enthalpy of confined fluid phase change. These mechanisms and quantitative theory provide new insights into the environmental coupling of nanomechanical systems and the implications for devices and nanofluidic conduits.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Chemical control of competing electron transfer pathways in iron tetracyano-polypyridyl photosensitizers

Photoinduced intramolecular electron transfer dynamics following metal-to-ligand charge-transfer (MLCT) excitation of [Fe(CN) 4 (2,2'-bipyridine)] 2- (1), [Fe(CN) 4 (2,3-bis(2-pyridyl)pyrazine)] 2- (2) and [Fe(CN) 4 (2,2'-bipyrimidine)] 2- (3) were investigated in various solvents with static and time-resolved UV-Visible absorption spectroscopy and Fe 2p3d resonant inelastic X-ray scattering (RIXS). This series of polypyridyl ligands, combined with the strong solvatochromism of the complexes, enables the 1 MLCT vertical energy to be varied from 1.64 eV to 2.64 eV and the 3 MLCT lifetime to range from 180 fs to 67 ps. The 3 MLCT lifetimes in 1 and 2 decrease exponentially as the MLCT energy increases, consistent with electron transfer to the lowest energy triplet metal-centred ( 3 MC) excited state, as established by the Tanabe–Sugano analysis of the Fe 2p3d RIXS data. In contrast, the 3 MLCT lifetime in 3 changes non-monotonically with MLCT energy, exhibiting a maximum. This qualitatively distinct behaviour results from a competing 3 MLCT → ground state (GS) electron transfer pathway that exhibits energy gap law behaviour. The 3 MLCT → GS pathway involves nuclear tunnelling for the high-frequency polypyridyl breathing mode (hν = 1530 cm -1 ), which is most displaced for complex 3, making this pathway significantly more efficient. Our study demonstrates that the excited state relaxation mechanism of Fe polypyridyl photosensitizers can be readily tuned by ligand and solvent environment. Furthermore, our study reveals that extending charge transfer lifetimes requires control of the relative energies of the 3 MLCT and the 3 MC states and suppression of the intramolecular distortion of the acceptor ligand in the 3 MLCT excited state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mitigation of breathing oscillations and focusing of the plume in a segmented electrode wall-less Hall thruster

We report in the absence of the channel walls bounding the plasma, a wall-less Hall thruster is a promising configuration with a potentially longer lifetime and easier scalability than conventional Hall thrusters. Because the ion acceleration takes place in the fringing magnetic field with a strong axial component, the operation of a typical wall-less thruster is characterized by a large beam divergence of the plasma flow, which reduces the thrust. In this work, the addition of a biased segmented electrode to the wall-less thruster is shown to significantly narrow the plasma plume and suppress large amplitude breathing oscillations of the discharge current commonly associated with ionization instability. Both effects result in improvements to the thruster performance. Physical mechanisms responsible for these effects are unclear, but they are apparently associated with the reduction of the electron cross field transport to the anode and a transition in the breathing mode frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

High-pressure high-temperature synthesis and characterization of B 10 C

The boron-rich boron carbide materials have been traditionally synthesized by adding boron powder to B 4 C material and subjecting it to hot pressing sintering for materials composition containing 8.8–20 at. % carbon in boron (composition range of B 10.4 C to B 4 C). Our study explores a synthesis route for B 10 C starting from high-purity boron and carbon and direct conversion under high pressure and high temperature (HPHT) conditions of 2000 °C and 6–8 GPa. Synthesis was verified via x-ray diffraction analysis, showing the conversion of the high-purity boron and carbon powder mixture into a hexagonal B 10 C structure (R-3m space group) with lattice parameters of a = b = 5.6115 Å and c = 12.197 Å. The concentration of boron was measured through x-ray photoelectron spectroscopy, confirming the B 10 C ratio. The measured nanoindentation mean hardness of B 10 C was 40 GPa. Raman spectroscopy of the HPHT synthesized sample shows characteristic vibrational breathing modes of boron icosahedron and an additional intense band at a vibrational frequency of 380 cm –1 . This Raman band, which appears notably weaker in earlier studies and B 4 C samples, is assigned to the linear chain of B–B–B and attributed to the maximal incorporation of boron within the hexagonal structure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tip- and Plasmon-Enhanced Infrared Nanoscopy for Ultrasensitive Molecular Characterizations

Herein, we propose a method for ultrasensitive infrared (IR) vibrational spectroscopy of molecules with nanoscale footprints by combining the tip enhancement of a scattering-type scanning near-field optical microscope (s-SNOM) and the plasmon enhancement of breathing-mode (BM) plasmon resonances of graphene nanodisks (GNDs). To demonstrate this, we develop a quantitative model that is capable of computing accurately the s-SNOM signals of nanoscale samples. With our modeling, we show that the s-SNOM tip can effectively excite gate-tunable BM plasmonic resonances in GNDs with strong field enhancement and sensitive dependence on the size of GND. Moreover, we demonstrate that the intense electric field of tip-excited plasmonic BMs can strongly enhance the IR vibrational modes of molecules. As a result, IR vibrational signatures of individual molecular particles with sizes down to 1–2 nm are readily observable by s-SNOM. Our study sheds light on future ultrasensitive IR biosensing that takes advantage of both the tip and plasmon enhancement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Sublattice-Dependent Antiferromagnetic Transitions in Rare Earth Nickelates

Perovskite rare earth nickelates exhibit remarkably rich physics in their metal-insulator and antiferromagnetic transitions, and there has been a long-standing debate on whether their magnetic structures are collinear or noncollinear. Through symmetry consideration based on the Landau theory, we discover that the antiferromagnetic transitions on the two nonequivalent Ni sublattices occur separately at different Néel temperatures induced by the O breathing mode. It is manifested by two kinks on the temperature-dependent magnetic susceptibilities with the secondary kink being continuous in the collinear magnetic structure but discontinuous in the noncollinear one. Here, the prediction on the secondary discontinuous kink is corroborated by an existing magnetic susceptibility measurement on bulk single-crystalline nickelates, thus strongly supporting the noncollinear nature of the magnetic structure in bulk nickelates, thereby shedding new light on the long-standing debate.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Description of the Proton-Decaying 0 2 + Resonance of the α Particle

The recent precise experimental determination of the monopole transition form factor from the ground state of 4 He to its $0$$^{+}_{2}$ resonance via electron scattering has reinvigorated discussions about the nature of this first excited state of the α particle. The $0$$^{+}_{2}$ state has been traditionally interpreted in the literature as the isoscalar monopole resonance (breathing mode) or, alternatively, as a particle-hole shell-model excitation. To better understand the nature of this state, which lies only ~410 keV above the proton emission threshold, we employ the coupled-channel representation of the no-core Gamow shell model. By considering the [ 3 H + p], [ 3 He + n], and [ 2 H + 2 H] reaction channels, we explain the excitation energy and monopole form factor of the $0$$^{+}_{2}$ state. Furthermore, we argue that the continuum coupling strongly impacts the nature of this state, which carries characteristics of the proton decay threshold.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Studies of a modulated Hall thruster

A typical Hall thruster is powered from a DC power supply and operates with a constant discharge voltage. In operation, the discharge current is subject to strong low frequency oscillations (so-called breathing oscillations). Recent studies have shown that not only can these breathing oscillations be correlated with improved performance, but these oscillations can be induced and controlled by modulating the anode voltage. In this work, a systematic experimental study of the plasma flow in a modulated cylindrical Hall thruster was performed to characterize the effect of natural and modulated breathing oscillations on thruster performance. Measurements suggest that modulating the anode voltage in resonance with the natural breathing frequency does increase the thrust, but a corresponding phase alignment of discharge current and discharge voltage causes the efficiency gains to be insignificant. In addition, the outward shift of the acceleration region causes the plasma plume divergence to increase at the resonance condition and thereby, limit the thrust increase. Further, mechanisms underlying the relative phase between discharge current, ion current, and discharge voltage are investigated experimentally and corroborated with one-dimensional hybrid simulations of the thruster discharge.

modelling↗
DOE OSTI2021

Charge Density Waves and Electronic Properties of Superconducting Kagome Metals

We report that kagome metals AV 3 Sb 5 (A = K, Rb, and Cs) exhibit intriguing superconductivity below 0.9 ~ 2.5 K, a charge density wave (CDW) transition around 80 ~ 100 K, and $\mathbb{Z}$ 2 topological surface states. The nature of the CDW phase and its relation to superconductivity remains elusive. In this work, we investigate the electronic and structural properties of CDW by first-principles calculations. We reveal an inverse Star of David deformation as the 2 x 2 x 2 CDW ground state of the kagome lattice. The kagome lattice shows softening breathing-phonon modes, indicating the structural instability. However, electrons play an essential role in the CDW transition via Fermi surface nesting and van Hove singularity. The inverse Star of David structure agrees with recent experiments by scanning tunneling microscopy (STM). The CDW phase inherits the nontrivial $\mathbb{Z}$ 2 -type topological band structure. Further, we find that the electron-phonon coupling is too weak to account for the superconductivity T c in all three materials. It implies the existence of unconventional pairing of these kagome metals. Our results provide essential knowledge toward understanding the superconductivity and topology in kagome metals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

The Modulated Crystal Structure of K 2 V 3 O 8

Weak lattice distortions can tune exchange pathways and magnetic interactions in square-lattice quantum magnets. K 2 V 3 O 8 is a mixed valence (V 4+ /V 5+ ) fresnoite oxide that exhibits strong spin–lattice coupling at low temperature. Here, we combine single-crystal neutron diffraction (90 K) and laboratory X-ray diffraction (50 K) to solve the low-temperature structure as an orthorhombic (3 + 1)D incommensurately modulated phase in superspace group Cmm2(β,0,1/2)0s0 [No. 196]. What initially appeared as two independent modulation vectors, q 1 = 0.3132(6)[$110$] + 1/2c* and q 2 = 0.3132(6)[$1\bar{10}$] + 1/2c*, are more naturally described as a single one-dimensional modulation wave q = 0.626(1)a* + 1/2c* in a C-centered orthorhombic lattice, related to the parent tetragonal cell by the transformation a + b, −a + b, c. Refinement with a 4-fold rotational twin inherited from the P4bm parent structure solves oxygen-dominated framework distortions and K + displacements. A de Wolff section (t = 0.40) enables a symmetry-mode decomposition, identifying three dominant mm2 (C 2v ) modes: GM3 for framework tilt, A5 for interlayer shear, and Z5 for c-axis breathing. The mode-resolved structure provides a unified, symmetry-based explanation for reported low-temperature Raman and IR anomalies and clarifies the structural origin of the spin–lattice coupling in the S = 1/2 two-dimensional quantum spin compound.

K2V3O8↗
DOE OSTI2021

Structure and dynamical properties of two-dimensional dusty plasmas on one-dimensional periodic substrates

In the presence of the substrate, various structural and dynamical properties of two-dimensional dusty plasma (2DDP) were investigated using Langevin dynamical simulations. This paper reviews a series of results of the structural and dynamical properties of 2DDP modified by one-dimensional periodic substrates (1DPSs) as follows. First, when the depth of the 1DPS increases gradually, it is found that the static structural order of 2DDP along each potential well of the 1DPS increases first, and then decreases gradually. When the width of the 1DPS increases gradually, the particle arrangement in each potential well of the 1DPS changes from one straight row gradually to two rows, including the stable zigzag structure. Second, when there are two rows in each potential well of the 1DPS, the phonon spectra are split into two branches, corresponding to the breathing and sloshing modes, respectively. In addition, due to the pure repulsion between dust particles, from the obtained phonon spectra, the sloshing wave propagates backward at small wave numbers. Third, the calculated mean-square displacement (MSD) shown that, at the intermediate timescale between the initial ballistic and final diffusive motions, the particle motion tends to be more subdiffusive while the depth of the 1DPS increases. While the width of the 1DPS increases gradually, the long-time diffusive motion first increases, then decreases, and finally increases again, exhibiting the oscillation-like diffusion, due to the stable zigzag structure. Finally, when an external direct-current driving force is applied on all particles of 2DDP, three different depinning phases are discovered, which are the pinned, disordered plastic flow, and moving ordered states, respectively, as the driving force increases from zero. In addition, the continuous/discontinuous property of the phase transition between these different depinning states is investigated, showing that the transition property is modulated by the depth of the applied 1DPS

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Giant electron–phonon coupling of the breathing plane oxygen phonons in the dynamic stripe phase of $\hbox {La}_{1.67}\hbox {Sr}_{0.33}\hbox {NiO}_4$

Doped antiferromagnets host a vast array of physical properties and learning how to control them is one of the biggest challenges of condensed matter physics. La 1.67 Sr 0.33 NiO 4 (LSNO) is a classic example of such a material. At low temperatures holes introduced via substitution of La by Sr segregate into lines to form boundaries between magnetically ordered domains in the form of stripes. The stripes become dynamic at high temperatures, but LSNO remains insulating presumably because an interplay between magnetic correlations and electron–phonon coupling localizes charge carriers. Magnetic degrees of freedom have been extensively investigated in this system, but phonons are almost completely unexplored. We searched for electron–phonon anomalies in LSNO by inelastic neutron scattering. Giant renormalization of plane Ni–O bond-stretching modes that modulate the volume around Ni appears on entering the dynamic charge stripe phase. Other phonons are a lot less sensitive to stripe melting. Dramatic overdamping of the breathing modes indicates that dynamic stripe phase may host small polarons. We argue that this feature sets electron–phonon coupling in nickelates apart from that in cuprates where breathing phonons are not overdamped and point out remarkable similarities with the colossal magnetoresistance manganites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Low-frequency Raman signature of Ag-intercalated few-layer MoS 2

Density functional theory based calculations and experimental analysis on a limited number of real samples are performed to study how the presence of silver intercalated in the van der Waals gap of few-layer MoS 2 affects the low-frequency Raman active modes of this material. Silver is found to predominantly affect the breathing-like and shear-like vibrational modes of MoS 2 . These modes correspond to quasi-rigid movements of each individual layer with a restoring force (and, in turn, frequency) that is determined by modulations in the weak interlayer interactions. Noticeable red-shifts with increasing Ag concentration are found for all low-frequency modes. This finding indicates the potential for low-frequency vibrations as useful gauges for practical determination of silver concentration using low-frequency Raman spectroscopy. Finally, this work also describes a semi-classical linear chain model that allows to extrapolate results to a large number of layers. Further, first-principles calculations show how Raman spectroscopy can be used to characterize the quality of the two-dimensional interface between MoS 2 and a silver substrate.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Decoding THz‐Driven Dynamic Fingerprints of Ferroelectric Nanotwin Networks

Ultrafast polarization dynamics in ferroelectrics are of considerable interest for high-speed tunable dielectrics and electro-optics. Extended domain wall networks formed in ferroelectric twin nanodomains can support collective dynamics in the terahertz regime but require techniques that track polarization and strain evolution driven by ultrafast stimulus. Here, we use multi-modal probing of THz-pulse-driven excitations in PbTiO 3 /SrTiO 3 superlattices by combining X-ray free electron laser measurements that directly tracks lattice changes, with optical second harmonic generation that tracks the electronic potential coupled with the lattice potential. Dynamical phase-field modeling enables fingerprinting of these collective modes as superpositions of domain “breathing” through wall oscillations and polarization “rotations” with still walls. Ultrafast domain wall motion at 0.1–0.5 THz is observed at practical fields of 100 kV/cm with wall velocities of >4000 m/s, approaching typical speed of sound in PbTiO 3 . A unique “charging” mode is discovered that can electrically charge and discharge domain walls on ∼4 ps time scale thus dynamically tuning wall conductivity. Integrated experimental and theoretical fingerprinting of the dynamical landscape presented here enables ultrafast control of ferroics for high-speed microelectronics and optical applications.

THz dynamics↗
DOE OSTI2022

Size dependent infectivity of SARS-CoV-2 via respiratory droplets spread through central ventilation systems

In this work, we evaluate the transport of respiratory droplets that carry SARS-CoV-2 through central air handling systems in multiroom buildings. Respiratory droplet size modes arise from the bronchioles representing the lungs and lower respiratory tract, the larynx representing the upper respiratory tract including vocal cords, or the oral cavity. The size distribution of each mode remains largely conserved, although the magnitude of each droplet mode changes as infected individuals breathe, speak, sing, laugh, cough, and sneeze. Here we evaluate how each type of respiratory droplet transits through central ventilation systems and the implications thereof for infectivity of COVID-19. We find that while larger oral droplets can transmit through the air handling systems, their size and concentration are greatly reduced with but few oral droplets leaving the source room. In contrast, the smaller droplets that originate from the bronchioles and larynx are much more effective in transiting through the air handling system into connected rooms. This suggests that the ratio of lower respiratory or deep lung infections may increase relative to upper respiratory infections in rooms connected by central air handling systems. Also, increasing the temperature and humidity in the range considered after the droplets have achieved an “equilibrium” size reduces the probability of infection.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Face mask integrated with flexible and wearable manganite oxide respiration sensor

Face masks are key personal protective equipment for reducing exposure to viruses and other environmental hazards such as air pollution. Integrating flexible and wearable sensors into face masks can provide valuable insights into personal and public health. The advantages that a breath-monitoring face mask requires, including multi-functional sensing ability and continuous, long-term dynamic breathing process monitoring, have been underdeveloped to date. Here, we design an effective human breath monitoring face mask based on a flexible La 0.7 Sr 0.3 MnO 3 (LSMO)/Mica respiration sensor. The sensor’s capabilities and systematic measurements are investigated under two application scenes, namely clinical monitoring mode and daily monitoring mode, to monitor, recognise, and analyse different human breath status, i.e., cough, normal breath, and deep breath. This sensing system exhibits super-stability and multi-modal capabilities in continuous and long-time monitoring of the human breath. We determine that during monitoring human breath, thermal diffusion in LSMO is responsible for the change of resistance in flexible LSMO/Mica sensor. Both simulated and experimental results demonstrate good discernibility of the flexible LSMO/Mica sensor operating at different breath status. Our work opens a route for the design of novel flexible and wearable electronic devices.

36 MATERIALS SCIENCE↗