Search NASA⌕ Search

SEARCH · Search NASA

Results for “canting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Magnetoelastic distortion of multiferroic BiFeO 3 in the canted antiferromagnetic state

Using THz spectroscopy, here we show that the spin-wave spectrum of multiferroic BiFeO 3 in its high-field canted antiferromagnetic state is well described by a spin model that violates rhombohedral symmetry. We demonstrate that the monoclinic distortion of the canted antiferromagnetic state is induced by the single-ion magnetoelastic coupling between the lattice and the two nearly antiparallel spins. The revised spin model for BiFeO 3 contains two new single-ion anisotropy terms that violate rhombohedral symmetry and depend on the direction of the magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Canted antiferromagnetic phases in the candidate layered Weyl material EuMnSb 2

EuMnSb 2 is a candidate topological material which can be tuned towards a Weyl semimetal, but there are differing reports for its antiferromagnetic (AFM) phases. The coupling of bands dominated by pure Sb layers hosting topological fermions to Mn and Eu magnetic states provides a potential path to tune the topological properties. In this study we present single-crystal neutron diffraction, magnetization, and heat-capacity data as well as polycrystalline 151 Eu Mössbauer data which show that three AFM phases exist as a function of temperature, and we present a detailed analysis of the magnetic structure in each phase. The Mn magnetic sublattice orders into a C-type AFM structure below T N Mn = 323 (1) K with the ordered Mn magnetic moment μ Mn lying perpendicular to the layers. AFM ordering of the Eu sublattice occurs below T N Eu1 = 23 (1) K with the ordered Eu magnetic moment μ Eu canted away from the layer normal and μ Mn retaining its higher temperature order. μ Eu is ferromagnetically aligned within each Eu layer but exhibits a complicated AFM layer stacking. Both of these higher-temperature phases are described by magnetic space group (MSG) $\mathcal{Pn'm'a'}$ with the chemical and magnetic unit cells having the same dimensions. Cooling below T N Eu2 =9 (1) K reveals a third AFM phase where μ Mn remains unchanged but μ Eu develops an additional substantial in-plane canting. This phase has MSG $\mathcal{P11}$ $\frac{2_1}{a′}$. We also find some evidence of short-range magnetic correlations associated with the Eu between 12 K≲ T≲ 30 K . Using the determined magnetic structures, we postulate the signs of nearest-neighbor intralayer and interlayer exchange constants and the magnetic anisotropy within a general Heisenberg model. We then discuss implications of the various AFM states in EuMnSb 2 and their potential for tuning topological properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-Canting-Induced Band Reconstruction in the Dirac Material Ca 1 – x Na x MnBi 2

The ternary A MnBi 2 ( A is alkaline as well as rare-earth atom) materials provide an arena for investigating the interplay between low-dimensional magnetism of the antiferromagnetic MnBi layers and the electronic states in the intercalated Bi layers, which harbor relativistic fermions. We report on a comprehensive study of the optical properties and magnetic torque response of Ca 1–x Na x MnBi 2 . Our findings give evidence for a spin canting occurring at T s ~50–100 K. Thus, with the support of first-principles calculations we establish a direct link between the spin canting and the reconstruction of the electronic band structure, having immediate implications for the spectral weight reshuffling in the optical response, signaling a partial gapping of the Fermi surface, and the dc transport properties below T s .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transonic analysis of canted winglets

A computational method developed to provide a transonic analysis for upper/lower surface wing-tip mounted winglets is described. Winglets with arbitrary planform, cant and toe angle, and airfoil section can be modeled. The embedded grid approach provides high flow field resolution and the required geometric flexibility. In particular, coupled Cartesian/cylindrical grid systems are used to model the complex geometry presented by canted upper/lower surface winglets. A new rotated difference scheme is introduced in order to maintain the stability of the small-disturbance formulation in the presence of large spanwise velocities. Wing and winglet viscous effects are modeled using a two-dimensional 'strip' boundary layer analysis. Correlations with wind tunnel and flight test data for three transport configurations are included.

Rosen, B. S.↗

Measured Base Pressures on Several Twin Rocket-Nozzle Configurations at Mach Numbers of 0.6 to 1.4 with Effects Due to Nozzle Canting and Stabilizing Fins

An experimental investigation has been conducted at Mach numbers of 0.6 to 1.4 to determine the base pressures on several cylindrical afterbody configurations having two propulsive nozzles and to determine the effect on base pressure of stabilizing fins and the canting outward of the propulsive nozzles. Nozzle design Mach numbers of 2.0 and 3.43 were employed in this investigation and cold air at total pressures up to 120 times the free-stream static pressure was used to simulate nozzle flow. The results show that canting the nozzles outward 11 degrees was effective in increasing base pressures at supersonic speeds and that stabilizing fins caused a decrease in base pressure. The magnitudes of base pressure coefficients obtained in this investigation were consistent with those obtained on similar configurations in previous jet-effect investigations.

Cubbage, James M.↗

Multi-Canted Coils, Tubes, and Structures

Coil, tube, and other structures configured with a plurality of individual coils, internal structures, legs or extensions with each having multiple cants per coil, internal structure, leg or extension, and wherein the cants formed therein allow for a load-deflection force when each is compressed. In addition, any horizontal or moment forces are substantially reduced and/or eliminated when a downward vertical force is applied, as minimal or no torsion is created in the individual coils, legs or extensions.

Jaster, Mark L.↗

Synthesis, structure and canted antiferromagnetism of layered cobalt hydroxide sorbate

Layered hybrid organic–inorganic compounds of the transition metal hydroxides, in which part of the hydroxide ions are exchanged for organic ligands that act as spacers of the 2-dimensional inorganic layers, elicit new or enhanced properties. The interlayer ligands enable fine-tuning of the physicochemical properties of the metal hydroxide layers, including their magnetism. Specifically, within the Co(OH) 2 family of transition ion hydroxides, this approach has been leveraged to stabilize antiferromagnetic and ferrimagnetic ground states for pillared and layered complexes, respectively. Here, in this work, we further investigate the effects of changing dimensionality, local Co coordination, and interlayer spacing on the magnetic ground state of brucite-like β-Co(OH) layered complexes. We report the hydrothermal synthesis of a new crystalline material, Co(OH)(sorb), where the inorganic layers are spaced by monotopic, doubly unsaturated sorbate ligands (sorb = [C 6 H 7 O 2 ] – ). The material was structurally characterized using powder X-ray and neutron diffraction measurements and the crystal structure was solved ab initio from powder diffraction data and refined using the Rietveld method. The magnetic susceptibility and magnetization measurements reveal canted antiferromagnetic ordering with T N = 41.7 K. This report augments our understanding of tuning magnetism through dimensionality in layered complexes and represents a step forward in the design of new 2D layered hybrid compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chloride Reduction of Mn 3+ in Mild Hydrothermal Synthesis of a Charge Ordered Defect Pyrochlore, CsMn 2+ Mn 3+ F 6 , a Canted Antiferromagnet with a Hard Ferromagnetic Component

Geometrically frustrated systems play an important role in studying new physical phenomena and unconventional thermodynamics. Charge ordered defect pyrochlores AM 2+ M 3+ F 6 offer a convenient platform for probing the interplay between electron distribution over M 2+ and M 3+ sites and structural distortions; however, they are limited to compounds with M 2+/3+ = V, Fe, Ni, and Cu due to difficulties in the simultaneous stabilization of other 3d elements in the +2 and +3 oxidation states. Herein, we employ Cl– anions under hydrothermal conditions for the mild reduction of Mn 2 O 3 in concentrated HF to obtain the CsMn 2+ Mn 3+ F 6 composition as a phase pure sample and study its properties. The magnetism of CsMn 2 F 6 was characterized by measuring the magnetic susceptibility and isothermal magnetization data, and a magnetic transition to a canted antiferromagnet state was found at 24.1 K. We determined the magnetic structure of CsMn 2 F 6 using powder neutron diffraction, which revealed successive long-range ordering of the Mn 2+ and Mn 3+ sites that is accompanied by a second transition. As a result, the role and strength of magnetic exchange interactions were characterized using DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analytical expression of a finite, long, conical canted-cosine-theta coil for particle collider interaction regions

Magnets in the accelerator interaction region (IR) present significant challenges because of high field requirements and limited available space. Conical-shaped magnets offer advantages in these environments by allowing closer placement to the interaction point while maintaining clearance from synchrotron radiation. Interestingly, numerical studies have shown that conical canted-cosine-theta (CCT) designs produce a constant field distribution along the axial direction in the IR quadrupoles for the Electron-Ion Collider (EIC) at Brookhaven National Laboratory. However, the field harmonics generated by conical CCT windings are not yet fully understood. This paper presents an analytical approach to describe the magnetic field produced by a conical surface current and proposes a method for designing conical CCT magnets for accelerator applications. First, we begin with a surface current sheet having a general cosine-theta distribution in spherical coordinates and solve the vector potential using the Green’s function. The magnetic fields generated by the conical current sheet are expressed using associated Legendre polynomials. These results are then related to circular field harmonics and integral field harmonics for designing a coil that produces a pure multipole field. Next, a single layer of the conical CCT winding path is produced based on the cosine-theta current distribution. Finally, the magnetic field quality of dipole and quadrupole conical CCT coils with multiple layers is verified using the Biot-Savart law.

Yang, Ye↗

Producing circular field harmonics inside elliptic magnet apertures with superconducting canted-cosine-theta coils

Superconducting magnets with noncircular aperture are desired for accelerators and many other high-field applications. This paper presents new methods for the analytic design of elliptic bore superconducting accelerator magnets. Part 1 of this work shares the derivation of current to field relations between a sheet current density on an elliptic cylinder and the magnetic field harmonics inside the aperture. This result is explored in the general context of elliptic bore magnet design with relevant scaling laws compared between elliptic and circular bore magnets. In part 2, this approach is applied to the specific geometry of canted-cosine-theta (CCT) accelerator magnets, enabling analytic winding design for single or mixed circular harmonics within elliptic aperture CCT magnets. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗

Canted Eu magnetic structure in EuMnSb 2

Magnetic ordering breaks the time-reversal symmetry, greatly impacting material topological properties. Here, we report the investigation of the magnetic properties of the layered EuMnSb 2 , which has two sets of magnetic sublattices. Both the magnetization and electrical resistivity reveal two phase transitions with one at T N,Eu ~21K and the other at T N,Mn ~346K. Single crystal neutron diffraction refinement indicates that both transitions are originated from magnetic ordering. Below T N,Mn , the Mn sublattice forms the C-type antiferromagnetic (AFM) structure with moments [(4.5±0.6)μB at 7 K] pointing along the a axis. Below T N,Eu , the Eu sublattice forms the canted A-type AFM structure with moments [(5.9±0.8)μB at 7 K] lying in the ac plane but pointing (41 ± 1)° away from the a axis. Quantitative analysis indicates that the spin-spin correlation length, while anisotropic, has long-range characteristic in all directions for both the Eu and Mn sublattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Canted antiferromagnetism in the quasi-one-dimensional iron chalcogenide BaFe 2 Se 4

We report the synthesis and physical properties studies of quasi-one-dimensional (quais-1D) iron chalcogenide BaFe 2 Se 4 which shares the FeSe 4 tetrahedra building motif commonly seen in the iron chalcogenide superconductors. A high-quality polycrystalline sample was achieved by solid-state reaction method and characterized by x-ray diffraction, electrical resistivity, magnetic susceptibility, and neutron diffraction measurements. BaFe 2 Se 4 is a narrow gap semiconductor that magnetically orders at ~310 K. Therefore, both neutron powder diffraction results and isothermal M-H loops suggest a canted antiferromagnetic structure where Fe sublattices are antiferromagnetically ordered along the c-axis quasi-1D chain direction, resulting in a net ferromagnetic moment in the perpendicular direction along the a axis with tilted angle of 18.7° towards the b axis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Three-dimensional stacking of canted antiferromagnetism and pseudospin current in undoped Sr 2 IrO 4 : Symmetry analysis and microscopic model realization

Recent optical second-harmonic generation experiments observed unexpected broken spatial symmetries in the undoped spin-orbit Mott insulator Sr2 IrO4, leading to intensive debates on the nature of its ground state. Here we propose that it is a canted antiferromagnetism (CAF) with a hidden order of circulating staggered pseudospin current. Symmetry analysis shows that a proper c-axis stacking of the CAF and the pseudospin current lead to a magnetoelectric coexistence state that breaks the twofold rotation, inversion, and time-reversal symmetries, consistent with experimental observations. We construct a three-dimensional Hubbard model with spin-orbit coupling and structural distortion for the five localized 5d Wannier orbitals centered at Ir sites and demonstrate the microscopic realization of the desired coexistence state in a wide range of band parameters via a combination of self-consistent Hartree-Fock and variational calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Geometric origin of the intrinsic transverse spin transport in a canted-antiferromagnet/heavy-metal heterostructure

We theoretically study the conditions under which an intrinsic spin Nernst effect–a transverse spin current induced by an applied temperature gradient–can occur in a canted-antiferromagnet insulator, such as LaFeO 3 and other materials of the same family. The spin Nernst effect may provide a microscopic mechanism for an experimentally observed anomalous thermovoltage in LaFeO 3 /Pt heterostructures, where spin is transferred across the insulator/metal interface when a temperature gradient is applied to LaFeO 3 parallel to the interface. We find that LaFeO 3 exhibits an intrinsic spin Nernst effect when inversion symmetry is broken on the axes parallel to both the applied temperature gradient and the direction of spin transport, which can result in a spin injection across the insulator/metal interface. Furthermore, our paper provides a general derivation of a symmetry-breaking-induced spin Nernst effect, which may open a path to engineering a finite spin Nernst effect in systems where it would otherwise not arise.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Canted antiferromagnetic order in the monoaxial chiral magnets V 1/3 TaS 2 and V 1/3 NbS 2

The Dzyaloshinskii-Moriya (DM) interaction is present in the transition metal dichalcogenides (TMDC) magnets of form M 1 / 3 T S 2 ( M = 3 d transition metal, T ϵ { Nb , Ta } ), given that the intercalants M form 3 × 3 superlattices within the structure of the parent materials T S 2 and break the centrosymmetry. Competition between DM and ferromagnetic exchange interactions has been shown to stabilize a topological defect known as a chiral soliton in select intercalated TMDCs, initiating interest both in terms of fundamental physics and the potential for technological applications. In the current article we report on our study of the materials V 1 / 3 TaS 2 and V 1 / 3 NbS 2 , using a combination of x-ray powder diffraction, magnetization, and single crystal neutron diffraction. Historically identified as ferromagnets, our diffraction results instead reveal that vanadium spins in these compounds are arranged into an A-type antiferromagnetic configuration at low temperatures. Refined moments are 1.37(6) and 1.50(9) μ B for V 1 / 3 TaS 2 and V 1 / 3 NbS 2 , respectively. Transition temperatures T c = 32 K for V 1 / 3 TaS 2 and 50 K for V 1 / 3 NbS 2 are obtained from the magnetization and neutron diffraction results. We attribute the small net magnetization observed in the low-temperature phases to a subtle ( ~ 2 ° ) canting of XY spins in the out-of-plane direction. These new results are indicative of dominant antiferromagnetic exchange interactions between the vanadium moments in adjacent a b planes, likely eliminating the possibility of identifying stable chiral solitons in the current materials.

36 MATERIALS SCIENCE↗

A Field Quality Modeling in Canted Cosine Theta Dipole Magnets Wound Using REBCO Cables

In accelerator magnets the magnetic field quality is an important parameter. Using REBCO tapes or cables in magnet windings affects the magnetic field quality because of a quite high magnetization generated by these conductors. In this paper we analyzed numerically (using FEM) an effect of various REBCO cables’ magnetization on the field quality of canted cosine theta (CCT) dipole magnets. The magnetic properties of the cables were taken from our measurements of their M (H) curves at 4.2 K and magnetic fields up to 12 T. Also, flux creep effects were measured and their effects on field quality analyzed. Here we present a modeling of a CCT magnet containing 1 dipole double layer wound using a CORC and STAR cable. To make the FEM modeling less computationally “expensive”, we modelled only a section of 10 turns of the magnet's central part and calculated b3 fields on a circle of 2/3 of the innermost layer center line. Special M (H) curves measured during various field cycles (the so called “pre-injection cycles”) are effective in decreasing b 3 fields of the magnets. Flux creep effects suppress the b 3 fields further. In conclusion, using these techniques b 3 fields less than 10 units can be achieved.

36 MATERIALS SCIENCE↗

Structural Analysis of Multilayer Tapered Canted-Cosine-Theta Superconducting Magnet for the Interaction Region of Electron Ion Collider

The electron ion collider (EIC) will collide high energy and highly polarized hadron and electron beams with luminosities up to 10 34 cm -2 s -1 . The magnet designs at the interaction region (IR) are challenging due to the close proximity of the hadron and electron beams. A canted cosine theta (CCT) quadrupole magnet was designed due to the space restrictions at the IR. The CCT magnet has a tapered aperture, which allows higher gradients at the interaction point (IP) side of the magnet. The tapered geometry makes the magnet not symmetrical along the axial direction. In conclusion, to validate the design in terms of the mechanical strength and the allowed deformations, a detailed structural mechanical analysis for the tapered CCT quadrupole magnet has been carried out using the finite element method (FEM) considering both the shrinking due to cool down and the electromagnetic force on the conductors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fabrication and Test of C3a: A Six-Layer Subscale Canted $\cos \theta$ Dipole Magnet Using High-Temperature Superconducting corc Wires

REBCO coated conductors have a strong potential for high-field magnet applications. The REBCO technology, however, is still in its infancy for accelerator magnet applications. As part of the U.S. Magnet Development Program (MDP), we developed a six-layer canted cos θ dipole magnet, C3a, using CORC® wires developed by Advanced Conductor Technologies LLC. All the layers were wound using a semi-automated winding machine. Three layers of the magnet used CORC® wires containing the SuperPower “AP” REBCO tapes and the remaining layers used the wires containing the “HM” tapes. At 77 K, both kinds of CORC® wires showed 5% to 10% degradation, after bending to a minimum bend radius of 30 or 35 mm, with respect to the self-field critical current measured before winding. At 4.2 K, the magnet reached 9.5 kA at a ramp rate of 9 A s -1 and generated a dipole field of 1.4 T. Further, the critical current of one layer degraded by 4% after a current transient up to 10.5 kA ramped in an averaged rate of 175 kA s -1 or 20 T s -1 . We confirmed the HM CORC® wire can carry a higher current than the AP CORC® wire at 4.2 K. The test results of the C3a magnet showed that the fabrication and assembly procedure can be used for the upcoming full-scale C3 magnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗