Search NASA⌕ Search

SEARCH · Search NASA

Results for “capillary interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Laboratory investigations related to microwaves

The investigation in a laboratory controlled environment was of the structure of the water surface and the immediate layers above and below the surface. The scope included: (1) the investigation of the capillary waves and their interaction with gravity waves, (2) the formation of whitecaps at different wind speeds and the influence of gravity waves on whitecaps, and (3) the wind-generated spray under different wind and wave conditions.

Shemdin, O. H.↗
NASA NTRS1993

A Simple Theory of Capillary-Gravity Wave Turbulence

Employing a recently proposed 'multi-wave interaction' theory [JFM, 243, 623-625], spectra of capillary-gravity waves are derived. This case is characterized by a rather high degree of nonlinearity and a complicated dispersion law. The resultant absence of scale invariance makes this and some other problems of wave turbulence (e.g., nonlinear Rossby waves) intractable by small-perturbation techniques, even in the weak turbulence limit. The analytical solution obtained in the present work is shown to be in good agreement with experimental data. Its low- and high-frequency limits yield power-laws characterizing spectra of purely gravity and capillary waves, respectively. In the limits of weak and strong linearity, these reduce of the Zakharov-Filonenko and Phillips spectra, respectively.

Glazman, Roman E.↗
DOE OSTI2016

Capillary pressure-saturation relations in quartz and carbonate sands: Limitations for correlating capillary and wettability influences on air, oil, and supercritical CO 2 trapping

Capillary pressure (P c )-saturation (S w ) relations are essential for predicting equilibrium and flow of immiscible fluid pairs in soils and deeper geologic formations. In systems that are difficult to measure, behavior is often estimated based on capillary scaling of easily measured P c –S w relations (e.g., air-water, and oil-water), yet the reliability of such approximations needs to be examined. In this study, 17 sets of brine drainage and imbibition curves were measured with air-brine, decane-brine, and supercritical (sc) CO 2 -brine in homogeneous quartz and carbonate sands, using porous plate systems under ambient (0.1 MPa, 23°C) and reservoir (12.0 MPa, 45°C) conditions. Comparisons between these measurements showed significant differences in residual nonwetting phase saturation, S nw,r . Through applying capillary scaling, changes in interfacial properties were indicated, particularly wettability. With respect to the residual trapping of the nonwetting phases, S nwr, CO2 > S nwr, decane > S nwr, air . Decane-brine and scCO 2 -brine Pc–Sw curves deviated significantly from predictions assuming hydrophilic interactions. Moreover, neither the scaled capillary behavior nor S nw,r for scCO 2 -brine were well represented by decane-brine, apparently because of differences in wettability and viscosities, indicating limitations for using decane (and other organic liquids) as a surrogate fluid in studies intended to apply to geological carbon sequestration. Thus, challenges remain in applying scaling for predicting capillary trapping and multiphase displacement processes across such diverse fields as vadose zone hydrology, enhanced oil recovery, and geologic carbon sequestration.

58 GEOSCIENCES↗
NASA NTRS1974

Ocean dynamics studies

Both the theoretical and experimental investigations into current-wave interactions are discussed. The following three problems were studied: (1) the dispersive relation of a random gravity-capillary wave field; (2) the changes of the statistical properties of surface waves under the influence of currents; and (3) the interaction of capillary-gravity with the nonuniform currents. Wave current interaction was measured and the feasibility of using such measurements for remote sensing of surface currents was considered. A laser probe was developed to measure the surface statistics, and the possibility of using current-wave interaction as a means of current measurement was demonstrated.

Source record↗
DOE OSTI2018

Gas Flow and Ion Transfer in Heated ESI Capillary Interfaces

Transfer capillaries are the preferred means to transport ions, generated by electrospray ionization, from ambient conditions to vacuum. During the transfer of ions through the narrow, long tubes into vacuum, substantial losses are typical. However, recently it was demonstrated that these losses can be avoided altogether. To understand the experimental observation and provide a general model for the ion transport, here, we investigate the ion transport through capillaries by numerical simulation of interacting ions. The simulation encompasses all relevant factors, such as space charge, diffusion, gas flow, and heating. Special attention is paid to the influence of the gas flow on the transmission and especially the change imposed by heating. The gas flow is modeled by a one-dimensional gas dynamics description. A large number of ions are treated as point particles in this gas flow. This allows to investigate the influence of the capillary heating on the gas flow and by this on the ion transport. The results are compared with experimental findings. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1996

Influence of Thermocapillary Flow on Capillary Stability: Long Float-Zones in Low Gravity

A model problem is posed to study the influence of flow on the interfacial stability of a nearly cylindrical liquid bridge for lengths near its circumference (the Plateau-Rayleigh limit). The flow is generated by a shear stress imposed on the deformable interface. The symmetry of the imposed shear stress mimics the thermocapillary stress induced on a float-zone by a ring heater (i.e. a full zone). Principal assumptions are (1) zero gravity, (2) creeping flow, and (3) that the imposed coupling at the free surface between flow and temperature fields is the only such coupling. A numerical solution, complemented by a bifurcation analysis, shows that bridges substantially longer than the Plateau-Rayleigh limit are possible. An interaction of the first two capillary instabilities through the stress-induced flow is responsible. Time-periodic standing waves are also predicted in certain parameter ranges. Motivation comes from extra-long float-zones observed in MEPHISTO space lab experiments (June 1994).

Chen, Yi-Ju↗
NASA NTRS2019

The Unrealized Potential of Superhydrophobic Substrates in Advanced Life Support Systems

Nearly all water processing equipment aboard spacecraft is to a large extent controlled by capillary forces arising from substrate wetting conditions. Superhydrophobic wetting conditions provide an essentially passive means to keep water away from certain substrates providing a level of no-moving-parts phase separation and control. This work presents a host of non-wetting aqueous microgravity capillary fluidics phenomena arising from interactions with easily fabricated superhydrophobic substrates. The value of such phenomena for potential life support applications aboard spacecraft is clear, especially for substrate properties that are thermally robust, corrosion resistant, and self-cleaning for both long- and short term applications. Large length scale low-g demonstrations of the phenomena are provided in HD video format for the extensive drop tower tests conducted. The broader crosscutting impacts to numerous fluids processing operations for life support are discussed. Current practical applications addressed in light of superhydrophobicity include urine-processing, water recovery, fire safety, and others.

Superhydrophoic↗
NASA NTRS2001

Investigation of Capillary Limit in a Loop Heat Pipe

This paper presets an experimental study on the capillary limit of a loop heat pipe (LHP) at low powers. The slow thermal response of the loop at low powers made it possible to observe interactions among various components after the capillary limit was exceeded. The capillary limit at low powers was achieved by imposing additional pressure drops on the vapor line through the use of a metering valve. A differential pressure transducer was also used to measure the pressure drop across the evaporator and the compensation chamber (CC). Test results show that when the capillary limit is exceeded, vapor will penetrate the primary wick, resulting in a partial dry-out of the evaporator and a rapid increase of the CC temperature. Because the evaporator can tolerate vapor bubbles, the LHP will continue to function and may reach a new steady state at the higher temperature. Thus, the LHP will exhibit a graceful degradation in performance rather than a complete failure. Moreover, the loop can recover from a partial dry-out by reducing the heat load without a re-start.

Ku, Jentung↗
NASA NTRS1996

Waves in Radial Gravity Using Magnetic Fluid

We are beginning laboratory experiments using magnetically active ferrofluids to study surface waves in novel geometries. Terrestrial gravity is eliminated from the dynamics, and the magnetic body force felt by ferrofluid in the presence of a magnetic field gradient is used to create a geopotential field which is a section of or an entire sphere or cylinder. New optical, electromagnetic and ultrasonic diagnostic techniques are under development to initially study capillary-gravity wave propagation and interaction in such geometries.

Ohlsen, Daniel R.↗
NASA NTRS1993

Water Surface Currents, Short Gravity-Capillary Waves and Radar Backscatter

Despite their importance for air-sea interaction and microwave remote sensing of the ocean surface, intrinsic properties of short gravity-capillary waves are not well established. This is largely due to water surface currents and their effects on the direct measurements of wave parameters conducted at a fixed point. Frequencies of small scale waves propagating on a surface which itself is in motion, are subject to Doppler shifts. Hence, the high frequency tail of the wave spectra obtained from such temporal observations is smeared. Conversion of this smeared measured-frequency spectra to intrinsic-frequency (or wavenumber) spectra requires corrections for the Doppler shifts. Such attempts in the past have not been very successful in particular when field data were used. This becomes evident if the amplitude modulation of short waves by underlying long waves is considered. Microwave radar studies show that the amplitude of a short wave component attains its maximum value near the crests and its minimum in the troughs of the long waves. Doppler-shifted wave data yield similar results but much larger in modulation magnitude, as expected. In general, Doppler shift corrections reduce the modulation magnitude. Overcorrection may result in a negligible modulation or even in a strong modulation with the maximum amplitude in the wave troughs. The latter situation is clearly contradictory to our visual observations as well as the radar results and imply that the advection by currents is overestimated. In this study, a differential-advection approach is used in which small scale waves are advected by the currents evaluated not at the free surface, but at a depth proportional to their wavelengths. Applicability of this approach is verified by the excellent agreement in phase and magnitude of short-wave modulation between results based on radar and on wave-gauge measurements conducted on a lake.

Atakturk, Serhad S.↗
NASA NTRS1995

Cell shape, cytoskeletal mechanics, and cell cycle control in angiogenesis

Capillary endothelial cells can be switched between growth and differentiation by altering cell-extracellular matrix interactions and thereby, modulating cell shape. Studies were carried out to determine when cell shape exerts its growth-regulatory influence during cell cycle progression and to explore the role of cytoskeletal structure and mechanics in this control mechanism. When G0-synchronized cells were cultured in basic fibroblast growth factor (FGF)-containing defined medium on dishes coated with increasing densities of fibronectin or a synthetic integrin ligand (RGD-containing peptide), cell spreading, nuclear extension, and DNA synthesis all increased in parallel. To determine the minimum time cells must be adherent and spread on extracellular matrix (ECM) to gain entry into S phase, cells were removed with trypsin or induced to retract using cytochalasin D at different times after plating. Both approaches revealed that cells must remain extended for approximately 12-15 h and hence, most of G1, in order to enter S phase. After this restriction point was passed, normally 'anchorage-dependent' endothelial cells turned on DNA synthesis even when round and in suspension. The importance of actin-containing microfilaments in shape-dependent growth control was confirmed by culturing cells in the presence of cytochalasin D (25-1000 ng ml-1): dose-dependent inhibition of cell spreading, nuclear extension, and DNA synthesis resulted. In contrast, induction of microtubule disassembly using nocodazole had little effect on cell or nuclear spreading and only partially inhibited DNA synthesis. Interestingly, combination of nocodazole with a suboptimal dose of cytochalasin D (100 ng ml-1) resulted in potent inhibition of both spreading and growth, suggesting that microtubules are redundant structural elements which can provide critical load-bearing functions when microfilaments are partially compromised. Similar synergism between nocodazole and cytochalasin D was observed when cytoskeletal stiffness was measured directly in living cells using magnetic twisting cytometry. These results emphasize the importance of matrix-dependent changes in cell and nuclear shape as well as higher order structural interactions between different cytoskeletal filament systems for control of capillary cell growth during angiogenesis.

Non-NASA Center↗
DOE OSTI2017

The effects of burial diagenesis on multiscale porosity in the St. Peter Sandstone: An imaging, small-angle, and ultra-small-angle neutron scattering analysis

To examine the effects of burial diagenesis on heirarchical pore structures in sandstone and compare those with the effects of overgrowth formation, we obtained samples of St. Peter Sandstone from drill cores obtained in the Illinois and Michigan Basins. The multiscale pore structure of rocks in sedimentary reservoirs and the mineralogy associated with those pores are critical factors for estimating reservoir properties, including fluid mass in place, permeability, and capillary pressures, as well as geochemical interactions between the rock and the fluid. The combination of small- and ultra-small-angle neutron scattering with backscattered electron or X ray-computed tomographic imaging, or both, provided a means by which pore structures were quantified at scales ranging from aproximately 1 nm to 1 cm—seven orders of magnitude. Larger scale (>10 µm) porosity showed the expected logarithmic decrease in porosity with depth, although there was significant variation in each sample group. However, small- and ultra-small-angle neutron scattering data showed that the proportion of small-scale porosity increased with depth. Porosity distributions were not continuous, but consisted of a series of log normal-like distributions at several distinct scales within these rocks. Fractal dimensions at larger scales decreased (surfaces smoothed) with increasing depth, and those at smaller scales increased (surfaces roughened) and pores become more isolated (higher lacunarity). Furthermore, data suggest that changes in pore-size distributions are controlled by both physical (compaction) and chemical effects (precipitation, cementation, dissolution).

58 GEOSCIENCES↗
DOE OSTI2018

Investigation of Adhesion Forces Between Dust Particles and Solar Glass

We investigate the adhesion mechanisms that occur in the first stages of soiling by measuring adhesion forces between different kinds of particles and solar glass, using force vs. distance curves in an atomic force microscope (AFM). To simulate several degrees of roughness, we polished the samples at different conditions. We studied the effects of relative humidity by performing the measurements in a glove box and in an AFM enclosure. The measurements revealed that the main interactions are van der Waals and capillary forces. We show the dependence of the adhesion force on the several parameters and provide an explanation of how they operate.

14 SOLAR ENERGY↗
NASA NTRS1989

Vibration isolation technology: Sensitivity of selected classes of space experiments to residual accelerations

Progress performed on each task is described. Order of magnitude analyses related to liquid zone sensitivity and thermo-capillary flow sensitivity are covered. Progress with numerical models of the sensitivity of isothermal liquid zones is described. Progress towards a numerical model of coupled buoyancy-driven and thermo-capillary convection experiments is also described. Interaction with NASA personnel is covered. Results to date are summarized and they are discussed in terms of the predicted space station acceleration environment. Work planned for the second year is also discussed.

Alexander, J. Iwan D.↗
DOE OSTI2021

Experimental study of three-dimensional CO 2 -water drainage and fracture-matrix interactions in fractured porous media

Estimation of CO 2 storage capacity in fractured porous reservoirs requires a better understanding of the CO 2 -water flow fundamentals in fracture-matrix systems. There are few core-flood experiments on three-dimensional CO 2 -water drainage in a fracture-matrix system, yet none have examined the impacts of the capillary continuity of fractures and fracture-matrix interactions. In this study, twelve drainage experiments were conducted in four fracture-matrix columns, each comprising a vertical stack of a cylindrical rock core, a filter paper serving as an analogue to a horizontal fracture, and a ceramic plate. Here, the core sample was surrounded by open space at the top and circumferential sides to model fractures, allowing for 3-D CO 2 -water drainage in the rock core and displaced water draining across the horizontal fracture. X-ray computed tomography was conducted to visualize the dynamic invasion/drainage processes in four rock core samples showing contrasts in anisotropy, permeability, and heterogeneity. Experimental results show (1) the equilibrium CO 2 saturations in the rock matrix vary from 0.10 to 0.60 at controlled capillary pressures up to 200 kPa, (2) the CO 2 saturations in the matrix increase with water saturation in the horizontal fracture resulting in better capillary continuity for water to drain across the fracture, and (3) the fracture water saturation can be enhanced by the non-uniform fracture capillary pressure and countercurrent flow of CO 2 and water across the fracture-matrix interface. In the case of high fracture water saturation, matrix CO 2 saturation largely depends on matrix anisotropy and heterogeneity. The core-scale experimental results contribute to understand the fracture-matrix interactions and CO 2 storage efficiency in fractured porous media.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

An extended numerical manifold method for unsaturated soil-water interaction analysis at micro-scale

To investigate unsaturated soil-water interaction at micro-scale, this work extends the numerical manifold method (NMM) by incorporating a soil-water coupling model considering specific capillary water distribution and capillary force calculation. The soil skeleton is constructed by a soil skeleton generation algorithm with random polygons. To more realistically capture the interaction between soil grains and capillary water, a capillary mechanics-based geometric algorithm is proposed to iteratively calculate the capillary water distribution. The capillary forces corresponding to the capillary water distribution are calculated based on the Young-Laplace equation. The proposed capillary water solving framework is first verified by reproducing the soil-water characteristic curve and the capillary water distribution of an ideal contact-disk model against analytical solutions. To further validate the ability of the capillary water solving framework to predict hydraulic behavior of the real soil, a laboratory test on the Toyoura sand is reproduced numerically. Then an ideal direct shear test is performed to further validate the two-way soil-water coupling procedure, in which a comparison between the numerical and analytical results regarding the shear strength and matric suction is presented. Finally, microscopic hydraulic and compression tests are conducted on two soil specimens with the same porosity and mean grain diameter but different uniformity coefficients. The results elucidate that the extended method is a potential tool to explore unsaturated soil behaviors at micro-scale.

58 GEOSCIENCES↗
DOE OSTI2023

Droplet-Gas Interactions in Nanoelectrospray Multiphase Flow

Electrospray (ES) is production of a charged droplet plume that transits from an electrically biased supply capillary to a counter electrode under the influence of an electric field. Drag interactions with the surrounding gas decelerate the droplets while transferring the momentum from droplets to accelerate the surrounding gas, resulting in an induced gas flow. This work seeks to characterize the structure of the resulting gas jet and identify the key mechanisms defining the flow structure. The phenomenon of gas jets produced by momentum transfer from nano-electrospray (nES) plumes is explored with schlieren visualization, thermal anemometry, and numerical simulations. Schlieren visualization experiments provide information on the flow structure in support of simulation predictions, and the hot thermistor anemometry measurements of gas velocities outside the spray demonstrate quantitatively validated simulation results. The study reveals the formation of a moderately high velocity coaxial gas jet within the nES plume and provides insight into the overall flow structure of the induced flow. The multiphase electrohydrodynamic simulations enable numerical experimentation to explore the fundamental physics of coupled droplet-gas transport and the resulting flow structure. The simulations, confirmed by the experiments, reveal gas jetting induced by nES with a narrow (sub hundred micrometers in diameter) core originating from the nES liquid-jet breakup region and a surrounding larger-in-extent zone (several hundred micrometers in diameter) of lower velocity gas flow within the electrospray plume. This behavior is due to nES ejecting a stream of droplets from the tip of a narrow liquid cone-jet, where the combined effect of many small droplets transferring momentum to a confined region of gas yields a narrow but high-velocity gas stream. Furthermore, the micro-jets produced by nES have practical utility for mass spectrometry, 3D printing and fabrication, and thermal management.

77 NANOSCIENCE AND NANOTECHNOLOGY↗