Preparation and Characterization of Polyethylene Copolymers with PAH Side Groups as Carbon Fiber Precursors
Not provided.
Materials Science↗
SEARCH · Search NASA
Results for “carbon precursor”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Deciphering the morphology of transition metal carbonate cathode precursors
The performance and life of Li-ion battery cathode materials are determined by both the composition (crystal structure and transition metal ratio) and the morphology (particle size, size distribution, and surface area). Careful control of these two aspects is the key to long lasting, high-energy batteries that can undergo fast charge. Developing such cathodes requires manipulation of the synthesis conditions, namely the coprecipitation process to develop the precursor and a calcination step to lithiate and convert it to a transition metal oxide. In this paper, we utilize a combination of controlled synthesis, microscopic and spectroscopic characterization, and multi-scale mathematical modeling to shed light on the synthesis of cathode precursors. The complex interplay between the various chemical reactions in the co-precipitation process is studied to provide experimentalists with guidance on achieving composition control during synthesis. Further, the formation of a variety of morphologies of the primary particles and the driving force for agglomeration is mathematically described, for the first time, based on an energy minimization approach. Results suggest that the presence of Ni and/or Co significantly lowers the reaction rate constant compared to Mn, resulting in agglomerated growth in the former and single crystal growth in the latter. Modeling studies are used to provide a phase map describing the synthesis conditions needed to control the secondary particle size and corresponding size distribution. Finally, this paper represents an important step in developing a computationally guided approach to the synthesis of battery cathode materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Atomic Layer Deposition of Nanolayered Carbon Films
In this paper, carbon thin films were grown using the plasma-enhanced atomic layer deposition (PE-ALD). Methane (CH4) was used as the carbon precursor to grow the carbon thin film. The grown film was analyzed by the high-resolution transmission electron micrograph (TEM), X-ray photoelectron spectroscopy (XPS) analysis, and Raman spectrum analysis. The analyses show that the PE-ALD-grown carbon film has an amorphous structure. It was found that the existence of defective sites (nanoscale holes or cracks) on the substrate of copper foil could facilitate the formation of nanolayered carbon films. The mechanism for the formation of nanolayered carbon film in the nanoscale holes was discussed. This finding could be used for the controlled growth of nanolayered carbon films or other two-dimensional nanomaterials while combining with modern nanopatterning techniques.
Xiao, Zhigang (ORCID:0000000215950565)↗
Metallic and ferromagnetic carbon allotrope discovered using molecular precursors
Although carbon materials are known for their versatile structures and properties, a crystalline phase of carbon being both metallic and ferromagnetic is yet to be found. Here, using an organic molecular precursor 3,3-dimethyl-1-butene ( C 6 H 12 ) and a comprehensive theoretical study, we have discovered a metastable crystalline carbon phase that is both metallic and ferromagnetic under ambient conditions. The new carbon structures, produced by stacking puckered layers of 4,6-membered rings, are found to exhibit exotic electronic, magnetic, and mechanical properties originating from a special s p 2 − s p 3 bonding topology. These findings open the prospect of realizing the metallic and ferromagnetic carbon allotrope in practice. Published by the American Physical Society 2025
Fang, Hong (ORCID:0000000209688687)↗
Phenolic Resin Derived Hard Carbon Anode for Sodium-Ion Batteries: A Review
Sodium-ion batteries are complementary to lithium-ion batteries for grid-scale energy storage applications due to lower cost, safety, and potential for sustainable supply chains. The past decade has witnessed enormous research efforts in developing hard carbon anode materials for sodium-ion batteries. Phenolic resins have received significant attention as hard carbon precursors due to their high carbon yield, highly cross-linked structure, low cost, mature technology, and excellent electrochemical performance of corresponding hard carbon anode. This Review exclusively highlights the state-of-the-art preparation of hard carbon from phenolic resins, and the electrochemical performance in sodium-ion batteries. Cross-linked resins are prepared from three phenolic monomers (phenol, resorcinol, and phloroglucinol) to produce hard carbon. The effects of carbonization temperature on the microstructure, and electrochemical properties of hard carbon have been summarized here. Hard carbon formation, and sodium storage mechanisms have been briefly outlined. Finally, this Review provides an industrial perspective on hard carbon production at scale.
aromatic compounds↗
Cellulose regulated lignin/cellulose-based carbon materials with hierarchical porous structure for energy storage
Lignin has gained extensive attention as an ideal carbon precursor due to its abundance and high carbon content. However, the agglomeration of lignin and additional corrosive and unrecyclable reagents in direct pyrolysis still limit the development of lignin-based porous carbons. Herein, a facile and eco-friendly strategy was proposed to fabricate hierarchical porous lignin/cellulose-based carbon materials (LCs). In the process, cellulose nanofibrils acted as the skeleton of the bio-aerogels, which supported lignin and benefit the preparation of the LCs. Moreover, the specific surface area and the graphitization degree of LCs can be regulated by varying the cellulose content. Without activation, the bio-based carbon material (LC30) had a high specific surface area of 1770 m 2 g –1 , which displayed high specific capacitance of 216.2 F g –1 at the current density of 0.5 A g –1 . The supercapacitor based on LC30 also showed outstanding energy density of 12.3 Wh kg –1 at the power density of 50 W kg –1 . The sustainable raw material, simple and harmless preparation process, and remarkable electrochemical performance enable LC30, a promising supercapacitor electrode for energy storage.
25 ENERGY STORAGE↗
Prediction of curing kinetics of resorcinol‐added resole phenolic resins using differential scanning calorimetry for the fabrication of carbon/carbon composites
Phenolic resins are commonly used as carbon precursors for the fabrication of carbon/carbon composites due to their high carbon yield and aromatic nature. To decrease curing times, acid catalysts are generally used, but the addition of resorcinol was found to have a similar effect while being incorporated into the resin matrix with no contamination or corrosion issues. In this work, the curing kinetics of pure, 10, 20, and 30 wt% resorcinol-added phenolic resins were investigated through differential scanning calorimetry. Heating rates of 0.5, 1, 2.5, and 5°C min -1 were used with several curing models to predict isothermal curing. Averaged mean absolute error (MAE) for the isoconversional mathematical approaches namely Kissinger–Akahira–Sunose (MAE = 12.9 min), Flynn–Wall–Ozawa (15.8 min), and Vyazovkin (14 min) show that these methods provide the best predictions, attributed to their adoption of an activation energy that depends on the extent of cure (E a (α)). The Kissinger method (MAE = 36 min), which depends only on peak temperature with a constant activation energy assumption, and the data noise sensitive Friedman model (MAE = 1144.7 min) provide the least accurate results. Thermogravimetric analysis revealed that resorcinol decreases the curing times by up to 71% without lowering carbon yield.
36 MATERIALS SCIENCE↗
Tailoring Mesopores and Nitrogen Groups of Carbon Nanofibers for Polysulfide Entrapment in Lithium–Sulfur Batteries
In the current work, we combined different physical and chemical modifications of carbon nanofibers through the creation of micro-, meso-, and macro-pores as well as the incorporation of nitrogen groups in cyclic polyacrylonitrile (CPAN) using gas-assisted electrospinning and air-controlled electrospray processes. We incorporated them into electrode and interlayer in Li–Sulfur batteries. First, we controlled pore size and distributions in mesoporous carbon fibers (mpCNF) via adding polymethyl methacrylate as a sacrificial polymer to the polyacrylonitrile carbon precursor, followed by varying activation conditions. Secondly, nitrogen groups were introduced via cyclization of PAN on mesoporous carbon nanofibers (mpCPAN). We compared the synergistic effects of all these features in cathode substrate and interlayer on the performance Li–Sulfur batteries and used various characterization tools to understand them. Our results revealed that coating CPAN on both mesoporous carbon cathode and interlayer greatly enhanced the rate capability and capacity retention, leading to the capacity of 1000 mAh/g at 2 C and 1200 mAh/g at 0.5 C with the capability retention of 88% after 100 cycles. The presence of nitrogen groups and mesopores in both cathodes and interlayers resulted in more effective polysulfide confinement and also show more promise for higher loading systems.
25 ENERGY STORAGE↗
Sulfur-Enriched Nanoporous Carbon: A Novel Approach to CO 2 Adsorption
Carbon dioxide (CO 2 ) intake plays a vital role in sustaining the environmental balance by influencing global carbon dynamics and climatic stability. This work addresses the production of sulfur-doped porous nanocarbons (SDCs) as prospective sorbents for CO 2 capture. SDCs were fabricated by utilizing coconut shell as a carbon precursor and potassium persulfate as both a chemical activating agent and a sulfur dopant. The incorporation of sulfur functionalities into carbon matrices creates structural variability and active sites, boosting CO 2 absorption capabilities. Sulfur's peculiar electrical structure allows greater intermolecular interactions with CO 2 , enhancing adsorption affinities. According to the experimental data, the CO 2 uptake was best measured as 3.37 mmol/g at 0(degrees)C and 1 bar and 2.56 mmol/g at 25 C-degrees and 1 bar. The results show that the higher porosity of SDC materials adds to a large amplification in the CO 2 uptake capability. The work underlines the delicate interaction between sulfur doping, morphological porosity, and surface reactivity in enhancing the effectiveness of CO 2 sequestration. SDC materials hold considerable promise in tackling the present ecological concerns and developing CO 2 collection techniques. The suggested single-step synthesis technique described here provides a sustainable and environmentally friendly method for synthesizing SDCs for carbon capture applications.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Tailoring Polymer Colloids Derived Porous Carbon Spheres Based on Specific Chemical Reactions
Porous carbon spheres derived from polymer colloids with regular geometry, monodispersed morphology, well-controlled contents and structures play important roles in many areas of application, such as energy storage/conversion, gas adsorption/separation, catalysis, and chemo-photothermal therapy. Suitable polymerization reaction and synthetic strategy are both critical for the obtainment of stable polymer colloids as carbon precursors. Basic polymerization reactions are the cornerstones of synthetic strategies, which directly provides the direct molecular-based design of functionalized polymer/ carbon spheres. Thus, this progress report mainly focuses on the summary of suitable polymerization reactions for colloidal polymer derived porous carbon spheres. Recent advances in the synthetic strategies and applications are also discussed, including their corresponding polymerization reactions. Finally, the perspectives for the development of polymer derived porous carbon spheres are provided based on the controlled synthesis of polymer colloids and optimization over the carbonization process to achieve highly functionalized carbon spheres for practical applications.
36 MATERIALS SCIENCE↗
Heterostructured Lepidocrocite Titanate-Carbon Nanosheets for Electrochemical Applications
Lepidocrocite-type titanates that reversibly intercalate sodium ions at low potentials (~0.6 V vs Na/Na + ) are promising anode candidates for sodium-ion batteries. However, large amounts of carbon additives are often used to improve their electrical conductivity and overcome poor cycling performance in the electrode composites. To ameliorate electronic transport issues of lepidocrocite titanate (K 0.8 Ti 1.73 Li 0.27 O 4 , KTL) in sodium-ion batteries, we have designed and synthesized heterostructures of exfoliated lepidocrocite-type titanium oxide (LTO) nanosheets with alternating carbon layers via a solution-based self-assembly approach. Positively charged dopamine (Dopa) was used as the carbon precursor and intercalated between negatively charged exfoliated titania nanosheets through electrostatic interaction. Dopa-intercalated LTO was then annealed under argon to form conductive carbon layers between titania sheets. The carbon content in the heterostructures was controlled by modifying the self-assembly conditions (i.e., pH, stirring duration, and Dopa-to-LTO ratio). Electrodes were prepared using carbonized heterostructures (LTO-C) without adding more carbon to the composites and tested in sodium half-cell configurations. Further, higher capacities and improved capacity retention over 250 cycles and lower impedance were observed, as the carbon content of LTO-C heterostructures was increased from 0% (LTO nanosheets) to 30%. These results indicate that the self-assembly approach for 2D heterostructured electrode materials is a promising strategy to overcome electronic transport limitations of layered transition-metal oxides and improve their electrochemical performance for next-generation energy storage applications.
25 ENERGY STORAGE↗
Boosting the activity of non-platinum group metal electrocatalyst for the reduction of oxygen via dual-ligated atomically dispersed precursors immobilized on carbon supports
This paper describes the use of both atomically dispersed precursors (ADPs) and conductive carbon dispersion towards the synthesis of iron-based single atom electrocatalysts for the oxygen reduction reaction (ORR). For non-platinum group metal (non-PGM) catalysts, single iron, cobalt or manganese atoms coordinated with nitrogen are the most active structures towards the ORR. Achieving a high density of active sites made of single atoms is still challenging, requiring careful controls of pyrolysis to reduce the sintering of metal active sites. Herewith, we present a new strategy to synthesize iron-based single atom ORR electrocatalysts using a two pronged approach. We first designed a dual-ligated metal organic framework (MOF) precursor. This MOF was then immobilized onto Ketjen black carbon that serves as a conductive dispersion medium for creating the highly dispersed single atom sites. In this work, we demonstrate a near complete dispersion of the iron sites without obvious formation of nanoparticles. The activity of the resulting electrocatalyst exhibited an onset potential of 0.96 V and a half-wave potential of 0.84 V vs. reversible hydrogen electrode (RHE).
42 ENGINEERING↗
Phase transformation and electrochemical charge storage properties of vanadium oxide/carbon composite electrodes synthesized via integration with dopamine
Abstract Chemically preintercalated dopamine (DOPA) molecules were used as both a reducing agent and a carbon precursor to prepare δ‐V 2 O 5 · n H 2 O/C, H 2 V 3 O 8 /C, VO 2 (B)/C, and V 2 O 3 /C nanocomposites via hydrothermal treatment or hydrothermal treatment followed by annealing under Ar flow. We found that the phase composition and morphology of the produced composites are influenced by the DOPA:V 2 O 5 ratio used to synthesize (DOPA) x V 2 O 5 precursors through DOPA diffusion into the interlayer region of the δ‐V 2 O 5 · n H 2 O framework. The increase of DOPA concentration in the reaction mixture led to a more pronounced reduction of vanadium and a higher fraction of carbon in the composites’ structure, as evidenced by X‐ray photoelectron spectroscopy and Raman spectroscopy measurements. The electrochemical charge storage properties of the synthesized nanocomposites were evaluated in Li‐ion cells with nonaqueous electrolytes. δ‐V 2 O 5 · n H 2 O/C, H 2 V 3 O 8 /C, VO 2 (B)/C, and V 2 O 3 /C electrodes delivered high initial capacities of 214, 252, 279, and 637 mAh g –1 , respectively. The insights provided by this investigation open up the possibility of creating new nanocomposite oxide/carbon electrodes for a variety of applications, such as energy storage, sensing, and electrochromic devices.
Materials Science↗
Hollow nanoparticles with hybrid double layers
The present invention discloses the morphology of hollow, double-shelled submicrometer particles generated through a rapid aerosol-based process. The inner shell is an essentially hydrophobic carbon layer of nanoscale dimension (5-20 nm), and the outer shell is a hydrophilic silica layer of approximately 5-40 nm, with the shell thickness being a function of the particle size. The particles are synthesized by exploiting concepts of salt bridging to lock in a surfactant (CTAB) and carbon precursors together with iron species in the interior of a droplet. This deliberate negation of surfactant templating allows a silica shell to form extremely rapidly, sealing in the organic species in the particle interior. Subsequent pyrolysis results in a buildup of internal pressure, forcing carbonaceous species against the silica wall to form an inner shell of carbon. The incorporation of magnetic iron oxide into the shells opens up applications in external stimuli-responsive nanomaterials.
John, Vijay T.↗
Halide-free synthesis of metastable graphitic BC 3
A halide-free route to the synthesis of graphitic BC 3 was discovered via decomposition temperature matching: benzene (C 6 H 6 ) as the carbon precursor and the borohydride anion (BH 4 − ) as the boron precursor.
08 HYDROGEN↗
Synthesis of wafer-scale SWCNT forests with remarkably invariant structural properties in a bulk-diffusion-controlled kinetic regime
Robust synthesis of vertically aligned carbon nanotubes (VACNT) at large scale is required to accelerate deployment of numerous cutting-edge devices to emerging commercial applications. To address this need, this work demonstrates that the structural characteristics of single-walled CNTs (SWCNTs) produced in a growth regime dominated by bulk diffusion of the gaseous carbon precursor are remarkably invariant over a broad range of process conditions (precursor concentration increased up to 30-fold, catalyst substrate area from 1 cm 2 to 180 cm 2 , growth pressure from 20 to 790 mbar, and gas flowrates up to 8-fold). A simple growth kinetics model is derived that accounts for both reactant bulk diffusion and competing byproduct formation in the presence of excess hydrogen, which quantitatively reproduces the experimental data in the entire isothermal parameter space. The model enables critical predictions for process scale-up optimization including a potential 6-fold increase in CNT production rate, a ~90% carbon conversion efficiency in select conditions, and elimination of reaction rate decay observed at high pressures by using a hydrogen-free growth environment. This model-guided opportunity to substantially improve synthesis throughput and efficiency, in conjunction with the remarkably invariant CNT properties, is appealing for reliable VACNT device fabrication at both small and industrial scales.
36 MATERIALS SCIENCE↗
Synergy of Graphene Nanoribbons and Graphene Sheets for High-Rate Lithium-Sulfur Batteries
According to the increasing demands for shortening the battery charging time, high current rate (C-rate) performances become more significant in practical applications. With a higher theoretical capacity, lithium-sulfur batteries are treated as promising candidates for the next-generation batteries. In this work, the utilization of graphene nanoribbons (GNRs) exhibits the benefits in conductivity and other electrochemical performances, especially for high-rate applications. With air-controlled electrospray as the method, carbon encapsulated sulfur particles, poly(acrylic acid), reduced graphene oxide (rGO) sheets, and GNRs are mixed and directly deposited onto the carbon coated aluminum collector, to employ as the cathode. The scanning electron microscopy (SEM) imaging exhibits that the two-dimensional structure of GNRs helps construct inter-connected networks. This improved structure of cathode can increase the electroconductivity, confirmed by the electrochemical impedance spectroscopy (EIS), and modify the porosity, indicated through pore size distribution profiles. In this way, the polysulfides can be more efficiently trapped and utilized, realizing the promising behavior with faster charge transfer. In terms of the cycling performance at 0.2 C, the batteries with GNRs can perform 18% higher in capacity than those without GNRs, without decreasing the charge retention. According to the rate-capability tests, systems with GNRs can achieve enhanced performance compared to batteries with precursor carbon nanotubes (CNTs), especially at high C-rates. At 2 C, with 80 wt % of graphene-based materials as GNRs, batteries can achieve an increase in capacity by 78% and 41% compared with systems without GNRs and those with CNTs, respectively. Accordingly, the results testify the synergy of GNRs and rGO sheets in Li-S batteries.
25 ENERGY STORAGE↗
Growth and Performance of High-Quality SWCNT Forests on Inconel Foils as Lithium-Ion Battery Anodes
Large-scale production of vertically aligned single-walled carbon nanotubes (VA-SWCNTs) on metal foils promises to enable technological advancements in many fields, from functional composites to energy storage to thermal interfaces. In this work, we demonstrate growth of high-quality (G/D > 6, average diameters ~ 2–3 nm, densities > 10 12 cm –2 ) VA-SWCNTs on Inconel metal for use as a lithium-ion battery (LIB) anode. Scale-up of SWCNT growth on Inconel 625 to 100 cm 2 exhibits nearly invariant CNT structural properties, even when synthesis is performed near atmospheric pressure, and this robustness is attributed to a growth kinetic regime dominated by the carbon precursor diffusion in the bulk gas mixture. SWCNT forests produced on large-area metal substrates at close to atmospheric pressure possess a combination of structural features that are among the best demonstrated so far in the literature for growth on metal foils. Leveraging these achievements for energy applications, we demonstrate a VA-SWCNT LIB anode with capacity >1200 mAh/g at 1.0C and stable cycling beyond 300 cycles. Furthermore, this robust synthesis of high-quality VA-SWCNTs on metal foils presents a promising route toward mass production of high-performance CNT devices for a broad range of applications.
Energy↗