Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

In situ Characterization of Pt Catalysts Supported on Ceria Modified TiO(2) for the WGS reaction: Influence of Ceria Loading

This work analyzes the influence of cerium content (6-15 wt%) on a TiO{sub 2} support over the structure and water gas shift (WGS) activity of Pt catalysts. The structural properties of these Pt/Ce-TiO{sub 2} catalysts were characterized by XRD, TEM and XANES. Physicochemical characterization of the catalysts showed differences in the structure and dispersion of Ce entities on the support with Ce loading. For the samples with low ceria content (6 wt%), cerium is deposited on the support in the form of CeO{sub x} clusters in a highly dispersed state in close interaction with the Ti atoms. The formation of CeO{sub x} clusters at low Ce-loading on the support facilitates the dispersion of small particles of Pt and improves the reducibility of ceria component at low temperatures. The changes in platinum dispersion and support reducibility with Ce-loading on the TiO{sub 2} support lead to significant differences in the WGS activity. Pt supported on the sample with lower Ce content (6 wt%) shows better activity than those corresponding to catalysts with higher Ce content (15 wt%). Activity measurements coupled with catalysts characterization suggest that the improvement in the reducibility of the support with lower Ce content was associated with the presence of CeO{sub x} clusters of high reducibility that improve the chemical activity of the oxide-metal interfaces at which the WGS reaction takes place.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comprehensive Characterization of Mixed Metal Oxide Catalysts for Enhanced Catalyst Lifetime During Bio-Based C2-C6 Oxygenates to Olefins Processes (CRADA CRD-18-00728 Final Report)

Participant has developed mixed metal oxide (MMO) catalysts to selectively convert biomass-derived C2-C6 oxygenates to olefins and then hydrocarbon fuels to meet DOE 2022 fuel targets. Selective conversion ethanol to isobutylene with MMO catalysts (ZnOZrOx) requires low ethanol feeds to maintain performance. Increasing the feed results in rapid catalyst deactivation. Participant has increased catalyst stability by adding additional metal oxides. However, variations in performance based on the level and type of additive and catalytic conditions have been observed. This project will use advanced catalyst characterization methods through the ChemCatBio Advanced Catalyst Synthesis and Characterization (ACSC) project to gain insight into key catalyst features and deactivation modes with the goal of tailoring catalyst composition to improve performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen Reduction at PtNi Alloys in Direct Methanol Fuel Cells—Electrode Development and Characterization

Catalyst layers made from novel catalysts must be fabricated in a way that the catalyst can function to its full potential. To characterize a PtNi alloy catalyst for use in the cathode of Direct Methanol Fuel Cells (DMFCs), the effects of the manufacturing technique, ink composition, layer composition, and catalyst loading were here studied in order to reach the maximum performance potential of the catalyst. For a more detailed understanding, beyond the DMFCs performance measurements, we look at the electrochemically active surface area of the catalyst and charge-transfer resistance, as well as the layer quality and ink properties, and relate them to the aspects stated above. As a result, we make catalyst layers with optimized parameters by ultrasonic spray coating that shows the high performance of the catalyst even when containing less Pt than commercial products. Using this approach, we can adjust the catalyst layers to the requirements of DMFCs, hydrogen fuel cells, or polymer electrolyte membrane electrolysis cells.

30 DIRECT ENERGY CONVERSION↗

BETO 2021 Peer Review - Overview of the Chemical Catalysis for Bioenergy Consortium

Catalysis plays a central role in converting biomass and carbon-rich waste feedstocks into fuels and chemicals; however, critical catalysis challenges exist that are limiting commercialization of emerging bioenergy technologies. By leveraging unique U.S. Department of Energy National Laboratory capabilities and expertise, the Chemical Catalysis for Bioenergy consortium seeks to overcome these catalysis challenges and accelerate the catalyst and process development cycle. The foundation of the consortium consists of an integrated and collaborative portfolio of catalytic technologies and enabling capabilities, which positions ChemCatBio to address both technology-specific and overarching catalysis challenges across the development cycle from discovery to scale-up. The core catalysis projects target technological advancements for specific conversion processes, such as catalytic upgrading of biochemical process intermediates, catalytic fast pyrolysis, C1 and C2 upgrading, and electrochemical CO2 reduction, while the enabling technologies provide access to world-class capabilities and expertise in computational modeling, materials synthesis, advanced in situ and in operando catalyst characterization, and catalyst design tools.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

CO2 Hydrogenation to Hydrocarbons over Fe/BZY Catalysts

This manuscript reports a CO2 hydrogenation process in a catalytic laboratory-scale packed-bed reactor using an Fe/BZY15 (BaZr0.8Y0.15O3-d) catalyst to form hydrocarbons (e.g., CH4, C2+) at elevated pressure of 30 bar and temperatures in the range 270 = T = 375 degrees C. The effects of temperature, feed composition (i.e., CO2/H2 ratio, and residence time (i.e., Weight Hourly Space Velocity (WHSV) are studied to understand the relationship between CO2 conversion and carbon selectivity. Catalyst characterization elucidates the relationships between the catalyst structure, surface adsorbates, and reaction pathways. Thermodynamic analyses guide the experimental conditions and assist interpreting results. While the feed composition and temperature influence the product distribution, the results suggest that the higher-carbon (C2+) selectivity and yield depend strongly on residence time. The results suggest that the CO2 hydrogenation reaction pathway is similar to Fischer-Tropsch (FT) synthesis. The reaction begins with CO2 activation to form CO, followed by chain-growth reactions similar to the FT process. The CO2 activation depends on the redox activity of the catalyst. However, the carbon chain growth depends primarily on the residence time. as is the case for the FT synthesis, high residence time (on the orders of hours) is required to achieve high C2+ yield. For such high residence times, catalyst-fouling carbon deposition can be problematic. The coke-resistant BZY15 catalyst support contributes to the catalytic activity and enables a coke-free operation for more than 100 h time-on-stream.

bi-functional catalyst↗

The Development of Catalysts for Upgrading of Pyrolysis Vapor for Refinery Feedstocks and Intermediates: Cooperative Research and Development, CRADA Number CRD-12-00497 (Final Report)

Fast pyrolysis of biomass with vapor phase upgrading (VPU) can produce refinery feedstocks or intermediates that can meet the Department of Energy’s goal of cost-competitive hydrocarbon fuels by 2017. A key technical barrier for this technology is the lack of selective, cost effective catalysts that can produce high yields of fuel-appropriate hydrocarbons from the pyrolysis vapors. In overcoming this barrier, it will be important to engage leading catalyst development companies to devote their resources and expertise to the development of these materials. Thus, we propose a Cooperative Research and Development Agreement (CRADA) between the National Renewable Energy Laboratory (NREL), a world leader in biomass pyrolysis research and Johnson Matthey (JM), a world leader in the production of advanced catalyst materials to develop and test novel catalysts for efficient VPU. Through its Intercat Inc. subsidiary in Savannah, Ga., Johnson Matthey is internationally recognized as a leader in zeolite-based vapor phase upgrading in refinery duties and an emerging developer of biomass conversion technologies. The research and development efforts described in the proposed work will build upon existing collaborations between NREL and JM and play to the strengths of both institutions. NREL will analyze the composition of pyrolysis vapors as an input to catalyst design, screen and test catalysts, characterize the resulting oil and conduct techno-economic analysis. Catalyst samples will be produced and funded by JM. JM will design and synthesize catalysts, characterize fresh and used catalysts and develop catalyst supports needed to achieve commercially meaningful lifetimes. The project will span catalyst development and testing from the fundamental stage using quantum mechanical modeling and chemical reaction analysis to catalyst screening to integrated pilot studies.

09 BIOMASS FUELS↗

Characterization of Catalyst Materials for Production of Aerospace Fuels

Due to environmental, economic, and security issues, there is a greater need for cleaner alternative fuels. There will undoubtedly be a shift from crude oil to non-petroleum sources as a feedstock for aviation (and other transportation) fuels. Additionally, efforts are concentrated on reducing costs coupled with fuel production from non-conventional sources. One solution to this issue is Fischer-Tropsch gas-to-liquid technology. Fischer-Tropsch processing of synthesis gas (CO/H2) produces a complex product stream of paraffins, olefins, and oxygenated compounds such as alcohols and aldehydes. The Fisher-Tropsch process can produce a cleaner diesel oil fraction with a high cetane number (typically above 70) without any sulfur or aromatic compounds. This process is most commonly catalyzed by heterogeneous (in this case, silver and platinum) catalysts composed of cobalt supported on alumina or unsupported alloyed iron powders. Physisorption, chemisorptions, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) are described to better understand the potential performance of Fischer-Tropsch cobalt on alumina catalysts promoted with silver and platinum. The overall goal is to preferentially produce C8 to C18 paraffin compounds for use as aerospace fuels. Progress towards this goal will eventually be updated and achieved by a more thorough understanding of the characterization of catalyst materials. This work was supported by NASA s Subsonic Fixed Wing and In-situ Resource Utilization projects.

DeLaRee, Ana B.↗

Characterization of Catalyst Materials for Production of Aerospace Fuels

Due to environmental, economic, and security issues, there is a greater need for cleaner alternative fuels. There will undoubtedly be a shift from crude oil to non-petroleum sources as a feedstock for aviation (and other transportation) fuels. Additionally, efforts are concentrated on reducing costs coupled with fuel production from non-conventional sources. One solution to this issue is Fischer-Tropsch gas-to-liquid technology. Fischer-Tropsch processing of synthesis gas (CO/H2) produces a complex product stream of paraffins, olefins, and oxygenated compounds such as alcohols and aldehydes. The Fisher-Tropsch process can produce a cleaner diesel oil fraction with a high cetane number (typically above 70) without any sulfur or aromatic compounds. This process is most commonly catalyzed by heterogeneous (in this case, silver and platinum) catalysts composed of cobalt supported on alumina or unsupported alloyed iron powders. Physisorption, chemisorptions, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) are described to better understand the potential performance of Fischer-Tropsch cobalt on alumina catalysts promoted with silver and platinum. The overall goal is to preferentially produce C8 to C18 paraffin compounds for use as aerospace fuels. Progress towards this goal will eventually be updated and achieved by a more thorough understanding of the characterization of catalyst materials. This work was supported by NASA s Subsonic Fixed Wing and In-situ Resource Utilization projects.

Best, Lauren M.↗

Enhanced Hydrothermal Stability and Catalytic Activity of LaxZryOz Mixed Oxides for the Ketonization of Acetic Acid in the Aqueous Condensed Phase

Common ketonization catalysts such as ZrO2, CeO2, and TiO2-based catalysts have been reported to lose surface area, undergo phase transformation, and lose catalytic activity when utilized in the condensed aqueous phase. In this work, we synthesized a series of LaxZryOz mixed-metal oxides with different La:Zr atomic ratios with the goal of enhancing the catalytic activity and stability for the ketonization of acetic acid in condensed aqueous media at 568 K. We synthesized a hydrothermally stable LaxZryOz mixed-metal oxide catalyst with ketonization activity360 and 40 times more active than La2O3 and ZrO2, respectively. Catalyst characterization techniques suggest that the enhanced stability of the LaxZryOz catalysts is observed with the formation of a phase isomorphic with tetragonal ZrO2. DRIFT spectroscopy measurements indicated the enhanced catalytic activity of LaxZryOz catalysts correlated with greater acetic acid surface population in the presence of H2O versus pure ZrO2.

ketonization, deoxygenation, carboxylic acid, acet↗

Iron-oxide Aerogel and Xerogel Catalyst Formulations: Characterization by 57Fe Mössbauer and XAFS Spectroscopies

Iron in various iron-oxide aerogel and xerogel catalyst formulations ({ge}85% Fe{sub 2}O{sub 3}; {le}10% K, Co, Cu, or Pd) developed for possible use in Fischer-Tropsch synthesis (FTS) or the water-gas-shift (WGS) reaction has been examined by {sup 57}Fe Moessbauer spectroscopy. The seventeen samples consisted of both as-prepared and calcined aerogels and xerogels and their products after use as catalysts for FTS or the WGS reaction. Complementary XAFS spectra were obtained on the occurrence of the secondary elements in some of the same materials. A broad, slightly asymmetric, two-peak Moessbauer spectrum was obtained from the different as-prepared and calcined catalyst formulations in the majority of cases. Such spectra could only be satisfactorily fit with three quadrupole doublet components, but no systematic trends in the isomer shift and quadrupole splitting parameters and area ratios of the individual components could be discerned that reflected variations in the composition or preparation of the aerogel or xerogel materials. However, significant reductions were noted in the Moessbauer effective thickness (recoilless absorption effect per unit mass of iron) parameter, {chi}{sub eff}/g, determined at room temperature, for aerogels and xerogels compared to bulk iron oxides, reflecting the openness and lack of rigidity of the aerogel and xerogel structures. Moessbauer measurements for two aerogels over the range from 15 to 292 K confirmed the greatly diminished nature of this parameter at room temperature. Major increases in the effective thickness parameter were observed when the open structure of the aerogel or xerogel collapsed during calcination resulting in the formation of iron oxides (hematite, spinel ferrite). Similar structural changes were indicated by increases in this parameter after use of iron-oxide aerogels as catalysts for FTS or the WGS reaction, during which the iron-oxide aerogel was converted to a mixture of nonstoichiometric magnetite and the Haegg carbide, {chi}-Fe{sub 5}C{sub 2}, or nonstoichiometric magnetite, respectively.

01 COAL, LIGNITE, AND PEAT↗

Microwave catalytic conversion of acetylene for co-production of hydrogen and carbon nanotubes

Natural gas conversion to hydrogen and solid carbon can drastically reduce the carbon footprint. Microwave plasma pyrolysis is an emerging process for chemical industries to directly convert methane (CH 4 ), the major component of natural gas, to hydrogen and carbon, which offers benefits such as fast process dynamics, flexibility, and high product yield. However, the formation of unwanted by-products, like acetylene (C 2 H 2 ), will require extra cost for gas separation. Plasma pyrolysis of CH 4 produces large amount of acetylene at downstream, which is currently used mainly for welding. Here, to avoid gas separation and upgrade acetylene from the downstream of methane plasma reactor, a novel approach toward its transformation to carbon nanotubes (CNT) and pure hydrogen (H 2 ) over Ni-based bimetallic catalyst driven by microwave irradiation has been reported in this work. The dominant gas product was hydrogen. Low concentrations of methane, ethane, and ethylene were observed in the product stream. Catalytic acetylene decomposition was carried out at 400 °C over Al 2 O 3 supported Ni catalyst. The results showed that, at 400 °C, acetylene was dehydrogenated to CNT and hydrogen was the dominant gas in product stream over 10Ni-1Pd-Al 2 O 3 catalyst. Characterizations of spent catalysts was conducted using Raman spectroscopy and transmission electron microscopy (TEM) to investigate the properties of carbon deposited over the catalyst during the catalytic acetylene decomposition. The results highlight that methane can be efficiently converted to hydrogen and CNT through 2-step process, microwave plasma and microwave catalytic conversion of intermediate acetylene, operated in a single reactor system driven by microwave.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Catalyst Durability and Sulfur Tolerance by Atomic Layer Deposition (CRADA Final Report)

This CRADA advanced the use of atomic layer deposition (ALD) catalyst coatings to improve sulfur tolerance and demonstrate improved catalyst durability for biomass conversion chemistries. This project leveraged National Laboratory and industry expertise for ALD catalyst coating development between NREL, ALD NanoSolutions, Inc. ("ALD NanoSolutions"), and Johnson Matthey PLC ("Johnson Matthey"). To better understand the role of ALD coatings on catalyst activity and durability, a joint experimental and computational effort combined bench-scale ALD catalyst synthesis, material characterization, catalyst testing, and modeling of catalyst surface energetics. In addition, to demonstrate the commercial relevance of this technology, scaled ALD coated catalysts were subjected to continuous testing and accelerated aging to validate performance gains. Results were used to inform ALD catalyst coating manufacturing cost models, as well as biobased chemical process cost models.

09 BIOMASS FUELS↗

A simultaneous depolymerization and hydrodeoxygenation process to produce lignin-based jet fuel in continuous flow reactor

Economical production of lignin-based jet fuel (LJF) can improve the sustainability of sustainable aviation fuels (SAFs) as well as can reduce the overall greenhouse gas emissions. However, the challenge lies in converting technical lignin polymer from biorefinery directly to jet fuel in a continuous operation. In this work, we demonstrate a simultaneous depolymerization and hydrodeoxygenation (SDHDO) process to produce lignin-based jet fuel from the alkali corn stover lignin (ACSL) using engineered Ru-HY-60-MI catalyst in a continuous flow reactor at first time. The maximum carbon yield of LJF of 17.9wt% was obtained, and it comprised of 60.2wt% monocycloalkanes, and 21.6wt% polycycloalkanes. Catalyst characterization of Ru-HY-60-MI suggested there was no significant change in HY zeolite structure and its crystallinity after catalyst engineering. Catalyst characterizations performed post the SDHDO experiments indicate presence of carbon and K content in the catalyst. K content presence in the spent catalyst was due to K + ion was exchanged between lignin solution and HY-60 while carbon presence validated the SDHDO chemistry on the catalyst surface. Tier a fuel property testing indicates that LJF production using SDHDO chemistry can offer SAF with high compatibility, good sealing properties, low emissions, and high energy density for aircraft.

09 BIOMASS FUELS↗

Multiscale Evaluation of Catalytic Upgrading of Biomass Pyrolysis Vapors on Ni- and Ga-Modified ZSM-5

Metal-impregnated (Ni or Ga) ZSM-5 catalysts were studied for biomass pyrolysis vapor upgrading to produce hydrocarbons using three reactors constituting a 100 000x change in the amount of catalyst used in experiments. Catalysts were screened for pyrolysis vapor phase upgrading activity in two small-scale reactors: (i) a Pyroprobe with a 10 mg catalyst in a fixed bed and (ii) a fixed-bed reactor with 500 mg of catalyst. The best performing catalysts were then validated with a larger scale fluidized-bed reactor (using ~1 kg of catalyst) that produced measurable quantities of bio-oil for analysis and evaluation of mass balances. Despite some inherent differences across the reactor systems (such as residence time, reactor type, analytical techniques, mode of catalyst and biomass feed) there was good agreement of reaction results for production of aromatic hydrocarbons, light gases, and coke deposition. Relative to ZSM-5, Ni or Ga addition to ZSM-5 increased production of fully deoxygenated aromatic hydrocarbons and light gases. In the fluidized bed reactor, Ga/ZSM-5 slightly enhanced carbon efficiency to condensed oil, which includes oxygenates in addition to aromatic hydrocarbons, and reduced oil oxygen content compared to ZSM-5. Ni/ZSM-5, while giving the highest yield of fully deoxygenated aromatic hydrocarbons, gave lower overall carbon efficiency to oil but with the lowest oxygen content. Reaction product analysis coupled with fresh and spent catalyst characterization indicated that the improved performance of Ni/ZSM-5 is related to decreasing deactivation by coking, which keeps the active acid sites accessible for the deoxygenation and aromatization reactions that produce fully deoxygenated aromatic hydrocarbons. The addition of Ga enhances the dehydrogenation activity of the catalyst, which leads to enhanced olefin formation and higher fully deoxygenated aromatic hydrocarbon yields compared to unmodified ZSM-5. Catalyst characterization by ammonia temperature programmed desorption, surface area measurements, and postreaction temperature-programmed oxidation (TPO) also showed that the metal-modified zeolites retained a greater percentage of their initial acidity and surface area, which was consistent between the reactor scales. These results demonstrate that the trends observed with smaller (milligram to gram) catalyst reactors are applicable to larger, more industrially relevant (kg) scales to help guide catalyst research toward application.

09 BIOMASS FUELS↗