Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyzers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Cobalt-Group 13 Complexes Catalyze CO 2 Hydrogenation via a Co(-I)/Co(I) Redox Cycle

The Co(-I) dihydrogen complexes, [(η 2 -H 2 )CoML]-, where ML is the group 13 metalloligand, N(o-(NCH 2 PiPr 2 )C 6 H 4 ) 3 M, and M is Al, Ga, or In, were previously reported ( J. Am. Chem. Soc. 2017, 139, 6570-6573). In this work, the related Co(-I) end-on dinitrogen adducts, [(N 2 )CoML]-, were isolated and investigated as precatalysts for CO 2 hydrogenation. The Co–Ga catalyst was highly active, achieving 19,200 formate turnovers with an initial turnover frequency of 27,000 h –1 under 34 atm of 1:1 CO 2 /H 2 and using Verkade’s proazaphosphatrane as a base at ambient temperature. The Co–Al catalyst was moderately active, while the Co–In complex was inactive. Hence, tuning the group 13 ion greatly influences the catalytic activity at the Co site. To elucidate the role of the group 13 support, experimental and theoretical mechanistic studies of the Co–Ga and Co–Al catalysts were conducted. The Co(-I) H 2 species are potent hydride donors with estimated thermodynamic hydricities (ΔG° H– ) of 32.0(1) and 37.4(1) kcal/mol in CH 3 CN for M = Al and Ga, respectively. By acting as masked Co(I) dihydrides, the Co(-I) H 2 species operate via an unusual Co(-I)/Co(I) redox cycle. After hydride transfer to CO 2 , the resulting intermediate is the Co(I) hydride complex, HCoML, which was independently synthesized and structurally characterized for M = Al and Ga. The Gibbs free energy for H 2 binding, ΔG° bind (1 atm), to generate (η 2 -H 2 )HCoML was slightly more favorable for HCoGaL (-4.2(1) kcal/mol) than for HCoAlL (-2.7(1) kcal/mol). In the subsequent step, the deprotonation reaction to regenerate the initial catalyst was much more favorable for (η 2 -H 2 )HCoGaL (pK a of 31.4, CH 3 CN) than for (η 2 -H 2 )HCoAlL (pK a of 34.3). Finally, the straightforward substitution of Al with Ga perturbs the energy profile of the catalytic reaction (|ΔΔG° H– | = 5.4 kcal/mol, |ΔΔG° bind | = 1.5 kcal/mol, and |ΔΔG° K a | = 4.0 kcal/mol) and thus provides a thermodynamic rationale for the higher catalytic efficiency of Co–Ga over Co–Al.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Cationic Tantalum Hydrides Catalyze Hydrogenolysis and Alkane Metathesis Reactions of Paraffins and Polyethylene

Sulfated aluminum oxide (SAO), a high surface area material containing sulfate anions that behave like weakly coordinating anions, reacts with Ta(=CH t Bu)(CH 2 t Bu) 3 to form [Ta(CH 2 t Bu) 2 (O–) 2 ][SAO] (1). Subsequent treatment with H 2 forms Ta–H + sites supported on SAO that are active in hydrogenolysis and alkane metathesis reactions. In both reactions Ta–H + is more active than related neutral Ta–H sites supported on silica. This reaction chemistry extends to melts of high-density polyethylene (HDPE), where Ta–H + converts 30% of a low molecular weight HDPE (M n = 2.5 kg mol –1 ; D = 3.6) to low molecular weight paraffins under hydrogenolysis conditions. Under alkane metathesis conditions Ta–H + converts this HDPE to a high MW fraction (M n = 6.2 kDa; D = 2.3) and low molecular weight alkane products (C 13 –C 32 ). Furthermore, these results show that incorporating charge as a design element in supported d 0 metal hydrides is a viable strategy to increase the reaction rate in challenging reactions involving reorganization of C–C bonds in alkanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Proton-Coupled Electron Transfer Mechanisms for CO 2 Reduction to Methanol Catalyzed by Surface-Immobilized Cobalt Phthalocyanine

Immobilized cobalt phthalocyanine (CoPc) is a highly promising architecture for the six-proton, six-electron reduction of CO 2 to methanol. This electroreduction process relies on proton-coupled electron transfer (PCET) reactions that can occur by sequential or concerted mechanisms. Immobilization on a conductive support such as carbon nanotubes or graphitic flakes can fundamentally alter the PCET mechanisms. We use density functional theory (DFT) calculations of CoPc adsorbed on an explicit graphitic surface model to investigate intermediates in the electroreduction of CO 2 to methanol. Our calculations show that the alignment of the CoPc and graphitic electronic states influences the reductive chemistry. These calculations also distinguish between charging the graphitic surface and reducing the CoPc and adsorbed intermediates as electrons are added to the system. This analysis allows us to identify the chemical transformations that are likely to be concerted PCET, defined for these systems as the mechanism in which protonation of a CO 2 reduction intermediate is accompanied by electron abstraction from the graphitic surface to the adsorbate without thermodynamically stable intermediates. Furthermore, this work establishes a mechanistic pathway for methanol production that is consistent with experimental observations and provides fundamental insight into how immobilization of the CoPc impacts its CO 2 reduction chemistry.

Adsorption↗
DOE OSTI2025

Inorganic acid-catalyzed hydrogen peroxide-acetic acid pretreatment for selective delignification of poplar

Effects of different inorganic acids as catalysts on the delignification ability of hydrogen peroxide-acetic acid (HPAA) pretreatment were unclear. Herein, the oxidizability of HCl, HBr, H 2 SO 4 , and H 3 PO 4 -catalyzed HPAA on the delignification of poplar were investigated. The ionized H + from inorganic acids catalyzed the synthesis of peracetic acid and improved the oxidizability of HPAA. The anion of inorganic acids caused ineffective decomposition of peroxides and inorganic acids. After the addition of poplar, the H 2 SO 4 -catalyzed HPAA pretreatment exhibited the lowest pH than other inorganic acids catalyzed systems. After the catalysis by inorganic acid, HPAA removed 78.1–91.4 % poplar lignin. Compared with other inorganic acids, the H + of H 2 SO 4 exhibited superior retention in HPAA pretreatment of poplar. After poplar pretreated with the same initial pH value of inorganic acid-catalyzed HPAA, the H 2 SO 4 -catalyzed HPAA showed the strongest delignification ability of poplar. The presence of free radicals in inorganic acid-catalyzed HPAA was unnecessary for the delignification of poplar. Furthermore, this paper elucidated that the ionized H + of inorganic acid mainly enhanced the oxidizability of HPAA for the selectively delignification of ability of HPAA pretreatment.

In-situ synthesis↗
DOE OSTI2022

Cu-Catalyzed Atom Transfer Radical Polymerization: The Effect of Cocatalysts

Atom transfer radical polymerization (ATRP) is one of the most powerful methods to prepare well-defined (co)polymers. Cu-catalyzed ATRP methods are most commonly used because of the excellent control and tunable catalytic activities via ligand functionalization. This minireview summarizes the development of Cu-catalyzed ATRP in the presence of cocatalysts, which are used to regenerate Cu I complex activators during polymerizations. Fundamentals of Cu-based ATRP catalysts are first introduced, followed by the discussion of different types of cocatalysts in different Cu-catalyzed ATRP methods. Recent developments of photochemical cocatalysts for oxygen-tolerant ATRP and ATRP using long-wavelength irradiation are highlighted, which significantly expand the applications of Cu-catalyzed ATRP. Methods to study the properties of cocatalysts and their roles in Cu-catalyzed ATRP are discussed, with an outlook for the future development of cocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Flavin-dependent halogenases catalyze enantioselective olefin halocyclization

Abstract Halocyclization of alkenes is a powerful bond-forming tool in synthetic organic chemistry and a key step in natural product biosynthesis, but catalyzing halocyclization with high enantioselectivity remains a challenging task. Identifying suitable enzymes that catalyze enantioselective halocyclization of simple olefins would therefore have significant synthetic value. Flavin-dependent halogenases (FDHs) catalyze halogenation of arene and enol(ate) substrates. Herein, we reveal that FDHs engineered to catalyze site-selective aromatic halogenation also catalyze non-native bromolactonization of olefins with high enantioselectivity and near-native catalytic proficiency. Highly selective halocyclization is achieved by characterizing and mitigating the release of HOBr from the FDH active site using a combination of reaction optimization and protein engineering. The structural origins of improvements imparted by mutations responsible for the emergence of halocyclase activity are discussed. This expansion of FDH catalytic activity presages the development of a wide range of biocatalytic halogenation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Metal-Catalyzed Thermo-Catalytic Decomposition and Continuous Catalyst Generation

In this study, metal dusting is utilized to initiate a two-stage thermo-catalytic decomposition (TCD) process. Stage 1 starts with metal-catalyzed TCD, and in stage 2 the metal-catalyzed carbon catalyzes additional TCD. TEM is presented of the early- versus late-stage TCD to qualitatively illustrate the second-stage TCD by the metal-catalyzed carbons. Corresponding SEM illustrates differences in growth type and surface density between early versus late reaction times, with backscattered imaging differentiating the first- versus second-stage TCD. TGA supports the microscopic inference of a second carbon phase by the presence of an early (low-temperature) reaction peak, characteristic of low-structure or disordered carbon as the second-stage TCD carbon. Raman analysis confirms that the second-stage carbon deposit is more disordered and unstructured, especially at 1000 °C, supported by the ID/IG and La value changes from 0.068 to 0.936 and 65 nm to 4.7 nm, respectively. To further confirm second-stage TCD occurrence upon pre-catalyzed carbons, two carbon blacks are tested. Exposing a combination of edge and basal or exclusively basal sites for the graphitized form, they afford a direct comparison of TCD carbon nanostructure dependence upon the initial carbon catalyst nanostructure. Pre-oxidation of the stainless-steel wool (SSW) prior to TCD is advantageous, accelerating TCD rates and increasing carbon yield relative to the nascent SSW for an equivalent reaction duration.

Chemistry↗
DOE OSTI2023

Mineral surface-catalyzed oxidation of Mn(II) by bromate: Implications for the occurrence of Mn oxides on Mars

The occurrence of manganese (Mn) oxides on Mars is believed to be an indicator of an O 2 -rich paleoenvironment of Mars because Mn oxides often form through the oxidation of Mn(II) by O 2 on the surface of Earth. An alternative formation pathway was recently proposed, in which Mn(II) is oxidized by bromate (BrO 3 - ), a common oxidant in contemporary Martian regolith. However, the oxidation of Mn(II) by bromate in solution is kinetically controlled and slow unless using very high concentrations (100 mM) of reactants that may be irrelevant to the conditions of Mars. We conducted laboratory simulations to determine whether iron (Fe) oxides (hematite and goethite) and a phyllosilicate (montmorillonite), abundant minerals on the surface of Mars, could catalyze the oxidation of Mn(II) by bromate. Hematite and goethite, but not montmorillonite, dramatically accelerated the oxidation with a low concentration (1 mM) of Mn(II) and bromate under various solution conditions. Further, the reaction system was autocatalytic with Fe oxides initiating the oxidation of Mn(II) at the early stage and the subsequent catalysis mainly provided by the Mn oxide products. In contrast to producing Mn(IV)O 2 only during the homogeneous oxidation of Mn(II) by bromate in solutions, the heterogeneous mineral-surface catalyzed oxidation resulted in a mixture of Mn(III)OOH and Mn(IV)O 2 phases. Mn(III)OOH was an intermediate product and can be further oxidized by bromate to Mn(IV)O 2 . The occurrence and accumulation of the intermediate product MnOOH can be attributed to its rapid formation due to surface-enhanced nucleation and growth on Fe oxide surfaces and to its higher resistance to oxidation by bromate than Mn(III) ions or clusters. Overall, mineralsurface catalyzed oxidation of Mn(II) by bromate is favorable from both thermodynamic and kinetic perspectives, and can be a major pathway for the occurrence of Mn oxides on Mars where microorganisms are lacking to catalyze the reaction. Our study further improves our understanding of the thermodynamic and kinetic controls on Mn(II) oxidation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Effect of Mixed-Solvent Environments on the Selectivity of Acid-Catalyzed Dehydration Reactions

The composition of the liquid phase can alter the rates of individual reaction steps and thus alter the selectivity of acid-catalyzed reactions, but these solvent effects are difficult to anticipate for design purposes. Herein, we report the kinetics and selectivity of Brønsted acid-catalyzed 1,2-propanediol dehydration in pure water and in aqueous mixtures of the polar aprotic cosolvents γ-valerolactone, 1,4-dioxane, tetrahydrofuran, N-methyl-2-pyrrolidone, tetramethylene sulfoxide, and dimethyl sulfoxide at 433 K. We find that the major product of 1,2-propanediol dehydration is propanal in most mixed-solvent environments with selectivities between 1 and 68 mol %. In contrast, 1,2-propanediol dehydration in aqueous mixtures of dimethyl sulfoxide affords acetone as the major product with up to 48% selectivity with minimal propanal formation. We use classical molecular dynamics simulations to probe these solvent effects by computing the difference between the solvation free energies of 1,2-propanediol and propanal in aqueous mixtures of polar aprotic cosolvents and in pure water. We find that the difference in the solvation free energies is correlated with the rates of propanal formation in all mixed-solvent environments, indicating that the solvent-mediated stabilization of the product state relative to the reactant state translates to increased selectivity toward the same product. Similar agreement between simulated solvation free energies and experimental reaction rates/selectivities is established for the acid-catalyzed dehydration of cis- and trans-1,2-cyclohexanediol and 1,3-cyclohexanediol. Finally, analysis of the solvation environment around 1,2-propanediol shows that dimethyl sulfoxide uniquely competes against water to solvate reactive hydroxyl groups, which causes a change in reaction mechanism in this solvent system that leads to the formation of acetone rather than propanal. Here, these results represent a step toward the computationally efficient screening of solvent systems for acid-catalyzed, liquid-phase processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Formic acid catalyzed isomerization and adduct formation of an isoprene-derived Criegee intermediate: experiment and theory

Isoprene is the most abundant non-methane hydrocarbon emitted into the Earth's atmosphere. Ozonolysis is an important atmospheric sink for isoprene, which generates reactive carbonyl oxide species (R 1 R 2 C[double bond, length as m-dash]O + O – ) known as Criegee intermediates. This study focuses on characterizing the catalyzed isomerization and adduct formation pathways for the reaction between formic acid and methyl vinyl ketone oxide (MVK-oxide), a four-carbon unsaturated Criegee intermediate generated from isoprene ozonolysis. syn-MVK-oxide undergoes intramolecular 1,4 H-atom transfer to form a substituted vinyl hydroperoxide intermediate, 2-hydroperoxybuta-1,3-diene (HPBD), which subsequently decomposes to hydroxyl and vinoxylic radical products. In this paper, we report direct observation of HPBD generated by formic acid catalyzed isomerization of MVK-oxide under thermal conditions (298 K, 10 torr) using multiplexed photoionization mass spectrometry. The acid catalyzed isomerization of MVK-oxide proceeds by a double hydrogen-bonded interaction followed by a concerted H-atom transfer via submerged barriers to produce HPBD and regenerate formic acid. The analogous isomerization pathway catalyzed with deuterated formic acid (D2-formic acid) enables migration of a D atom to yield partially deuterated HPBD (DPBD), which is identified by its distinct mass (m/z 87) and photoionization threshold. In addition, bimolecular reaction of MVK-oxide with D 2 -formic acid forms a functionalized hydroperoxide adduct, which is the dominant product channel, and is compared to a previous bimolecular reaction study with normal formic acid. Complementary high-level theoretical calculations are performed to further investigate the reaction pathways and kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Gold Catalyzed Polymerization Reactions of Unsaturated Substrates: Towards New Functional, Recyclable, and Upcycled Aromatic Polymers (Final Report)

The overarching goal of this project lied in the translation of gold (Au) catalyzed small molecule synthetic transformations to the field of polymer science, the generation of new macromolecular structures, and the application of the materials and methodologies produced toward sustainable polymer development and chemical upcycling. Specifically, this project aimed to polymerize monomers based on unsaturated precursors and access novel polymeric materials through the extension of Au catalyzed intermolecular processes. The specific objectives of this project comprised: (1) the extension of Au-catalyzed intermolecular reactions to bifunctional monomers and the polycondensation of diverse nucleophiles; (2) to gain fundamental mechanistic insight into Au-catalyzed polymerizations; (3) the application of these reactions to the synthesis of new classes of aromatic polymers that can be readily and/or selectively deconstructed; and (4) to apply these chemistries to post-polymerization modification (PPM) of commercially relevant polyaromatic substrates, including post-industrial plastics and post-consumer waste.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Two–Photon Printing of Base–Catalyzed Resins Involving Thiol–Michael Network Formation

Two-photon printing is accomplished using a photobase generator, 2-(2-nitrophenyl)-propyloxycarbony tetramethyl guanidine, to locally catalyze thiol-ene coupling between multifunctional monomers while mitigating chain-growth polymerization with free radical scavengers. Microstructures printed from base-catalyzed resins exhibit higher resolution (linewidths < 400 nm) and lower print error (<3%) than analogous microstructures printed using a photosensitive, free radical initiator. Further, Raman spectroscopy reveals that resins polymerized using the photobase generator in the presence of free radical scavengers exhibit higher selectivity of thiol-ene coupling over radical polymerization, resulting in stiffer, more uniform polymer networks. The base-catalyzed resins are capable of producing 3D microstructures printed with high accuracy and minimal post-processing defects. As a result, a direct comparison between free radical and base-initiated resins highlights the need for mindful consideration of how chemical reaction pathway influences printability and network end-properties when designing resins.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Carbonic Anhydrase Variants Catalyze the Reduction of Dialkyl Ketones with High Enantioselectivity

Abstract Human carbonic anhydrase II (hCAII) naturally catalyzes the reaction between two achiral molecules—water and carbon dioxide—to yield the achiral product carbonic acid through a zinc hydroxide intermediate. We have previously shown that a zinc hydride, instead of a hydroxide, can be generated in this enzyme to create a catalyst for the reduction of aryl ketones. Dialkyl ketones are more challenging to reduce, and the enantioselective reduction of dialkyl ketones with two alkyl groups that are similar in size and electronic properties, is a particularly challenging transformation to achieve with high activity and selectivity. Here, we show that hCAII, as well as a double mutant of it, catalyzes the enantioselective reduction of dialkyl ketones with high yields and enantioselectivities, even when the two alkyl groups are similar in size. We also show that variants of hCAII catalyze the site‐selective reduction of one ketone over the other in an unsymmetrical aliphatic diketone. Computational docking of a dialkyl ketone to variants of hCAII containing the zinc hydride provides insights into the origins of the reactivity of various substrates and the high enantioselectivity of the transformations and show how a confined environment can control the enantioselectivity of an abiological intermediate.

Chen, Reichi↗
DOE OSTI2024

Facile Access to Organostibines via Selective Organic Superbase Catalyzed Antimony‐Carbon Protonolysis

Abstract The selective formation of antimony‐carbon bonds via organic superbase catalysis under metal‐ and salt‐free conditions is reported. This novel approach utilizes electron‐deficient stibine, Sb(C 6 F 5 ) 3 , to give upon base‐catalyzed reactions with weakly acidic aromatic and heteroaromatic hydrocarbons access to a range of new aromatic and heteroaromatic stibines, respectively, with loss of C 6 HF 5 . Also, the significantly less electron‐deficient stibines, Ph 2 SbC 6 F 5 and PhSb(C 6 F 5 ) 2 smoothly underwent base‐catalyzed exchange reactions with a range of terminal alkynes to generate the stibines of formulae PhSb(C≡CPh) 2 , and Ph 2 SbC≡CR [R=C 6 H 5 , C 6 H 4 ‐NO 2 , COOEt, CH 2 Cl, CH 2 NEt 2 , CH 2 OSiMe 3 , Sb(C 6 H 5 ) 2 ], respectively. These formal substitution reactions proceed with high selectivity as only the C 6 F 5 groups serve as a leaving group to be liberated as C 6 HF 5 upon formal proton transfer from the alkyne. Kinetic studies of the base‐catalyzed reaction of Ph 2 SbC 6 F 5 with phenyl acetylene to form Ph 2 SbC≡CPh and C 6 HF 5 suggested the empirical rate law to exhibit a first‐order dependence with respect to the base catalyst, alkyne and stibine. DFT calculations support a pathway proceeding via a concerted σ‐bond metathesis transition state, where the base catalyst activates the Sb‐C 6 F 5 bond sequence through secondary bond interactions.

Culvyhouse, Jacob↗
DOE OSTI2024

Facile Access to Organostibines via Selective Organic Superbase Catalyzed Antimony‐Carbon Protonolysis

The selective formation of antimony-carbon bonds via organic superbase catalysis under metal- and salt-free conditions is reported. Here, this novel approach utilizes electron-deficient stibine, Sb(C 6 F 5 ) 3 , to give upon base-catalyzed reactions with weakly acidic aromatic and heteroaromatic hydrocarbons access to a range of new aromatic and heteroaromatic stibines, respectively, with loss of C 6 HF 5 . Also, the significantly less electron-deficient stibines, Ph 2 SbC 6 F 5 and PhSb(C 6 F 5 ) 2 smoothly underwent base-catalyzed exchange reactions with a range of terminal alkynes to generate the stibines of formulae PhSb(C≡CPh) 2 , and Ph 2 SbC≡CR [R=C 6 H 5 , C 6 H 4 -NO 2 , COOEt, CH 2 Cl, CH 2 NEt 2 , CH 2 OSiMe 3 , Sb(C 6 H 5 ) 2 ], respectively. These formal substitution reactions proceed with high selectivity as only the C 6 F 5 groups serve as a leaving group to be liberated as C 6 HF 5 upon formal proton transfer from the alkyne. Kinetic studies of the base-catalyzed reaction of Ph 2 SbC 6 F 5 with phenyl acetylene to form Ph 2 SbC≡CPh and C 6 HF 5 suggested the empirical rate law to exhibit a first-order dependence with respect to the base catalyst, alkyne and stibine. DFT calculations support a pathway proceeding via a concerted σ-bond metathesis transition state, where the base catalyst activates the Sb-C 6 F 5 bond sequence through secondary bond interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Surface Protected Organozirconium Catalyzes C─H Alumination of Saturated Hydrocarbons

Surface grafted organozirconium catalyzes C─H/Et─Al exchange reactions, involving saturated hydrocarbons and AlEt 3 , to afford organoaluminum compounds and ethane. The Zr(O t Bu) 3 @SiO 2 -Al 2 O 3 –700 (1) catalyst contains monopodal ≡SiO─Zr(O t Bu) 3 and only a few residual silanols (<5%). Nonetheless, these silanols are the Achille's heel of 1, providing a pathway for surface and catalyst degradation during catalysis, limiting the alkylaluminum yield and catalyst turnover. Support degradation, involving the cleavage of Si─O bonds by activated surface organometallics, is inhibited by capping silanols with ─SiMe 3 . Residual silanols in 1 react with allyltrimethylsilane, as determined by solid-state 13 C and 29 Si nuclear magnetic resonance (NMR) spectroscopy, infrared (IR) spectroscopy, and reaction stoichiometry, to form Zr(O t Bu) 3 /SiMe 3 @SiO 2 -Al 2 O 3–700 (2), which is resistant to degradation by AlEt 3 . C─H alumination of dodecane catalyzed by 2 produces higher yields of the 1-dodecylaluminum product in comparison to 1, and in >95% selectivity. Additionally, methane undergoes 2-catalyzed C─H alumination, providing a route to AlMe 3 .

Banerjee, Sayak [Iowa State Univ., Ames, IA (Unite↗
DOE OSTI2020

Towards understanding and predicting the hydronium ion catalyzed dehydration of cyclic-primary, secondary and tertiary alcohols

The varying steric environment of zeolites subtly influences the rates of hydronium-ion-catalyzed dehydration of alcohols containing a cyclohexyl group in aqueous phase. Here, the investigated primary, secondary, and tertiary alcohols show an increasing stabilization of an ionic transition state in this sequence, i.e., an increasing tendency to move from a concerted (E2 mechanism) to a stepwise dehydration (E1 mechanism). Hydronium ions confined in the micropores of MFI and BEA zeolites induced much higher catalyzed rates than those in the aqueous phase. Independent of the reaction mechanism and the environment, however, all alcohols investigated follow one compensation correlation between activation enthalpy and entropy for primary, secondary, and tertiary alcohols, respectively. For a given transition enthalpy, the rate of dehydration is the higher the larger the reaction space (translated to the reaction entropy). Surprisingly, all compensation relations intersect in one point. These dependences for the different alcohols are also reflected in the turnover rates, for which all alcohols also intersect in a common point, which appears to mark the highest reaction rate for dehydration catalyzed by hydronium ions at the investigated temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Hole-scavenging in photo-driven N 2 reduction catalyzed by a CdS-nitrogenase MoFe protein biohybrid system

The light-driven reduction of dinitrogen (N 2 ) to ammonia (NH 3 ) catalyzed by a cadmium sulfide (CdS) nanocrystal-nitrogenase MoFe protein biohybrid is dependent on a range of different factors, including an appropriate hole-scavenging sacrificial electron donor (SED). Here, the impact of different SEDs on the overall rate of N 2 reduction catalyzed by a CdS quantum dot (QD)-MoFe protein system was determined. The selection of SED was guided by several goals: (i) molecules with standard reduction potentials sufficient to reduce the oxidized CdS QD, (ii) molecules that do not absorb the excitation wavelength of the CdS QD, and (iii) molecules that could be readily reduced by sustainable processes. Earlier studies utilized buffer molecules or ascorbic acid as the SED. The effectiveness of ascorbic acid as SED was compared to dithionite (DT), triethanolamine (TEOA), and hydroquinone (HQ) across a range of concentrations in supporting N 2 reduction to NH 3 in a CdS QD-MoFe protein photocatalytic system. It was found that TEOA supported N 2 reduction rates comparable to those observed for dithionite and ascorbic acid. HQ was found to support significantly higher rates of N 2 reduction compared to the other SEDs at a concentration of 50 mM. A comparison of the rates of N 2 reduction by the biohybrid complex to the standard reduction potential (E o ) of the SEDs reveals that E o is not the only factor impacting the efficiency of hole-scavenging. These findings reveal the importance of the SED properties for improving the efficiency of hole-scavenging in the light-driven N 2 reduction reaction catalyzed by a CdS QD–MoFe protein hybrid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗