Emergence of A-Site Cation Order in the Small Rare-Earth Melilites SrREGa[subscript 3]O[subscript 7]
Explore the source record for details and available documents.
Genevois, Cecile↗
SEARCH · Search NASA
Results for “cation order”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Low-temperature synthesis of cation-ordered bulk Zn 3 WN 4 semiconductor via heterovalent solid-state metathesis
Metathesis reactions can synthesize a semiconductor Zn 3 WN 4 from Li 6 WN 4 combined with a ZnX 2 salt (where X = Br, Cl, F).
36 MATERIALS SCIENCE↗
Local cation ordering in compositionally complex Ruddlesden–Popper n = 1 oxides
The Ruddlesden–Popper (RP) layered perovskite structure is of great interest due to its inherent tunability, and the emergence and growth of the compositionally complex oxide (CCO) concept endows the RP family with further possibilities. Here, a comprehensive assessment of thermodynamic stabilization, local order/disorder, and lattice distortion was performed in the first two reported examples of lanthanum-deficient La n+1 B n O 3n+1 (n = 1, B = Mg, Co, Ni, Cu, Zn) obtained via various processing conditions. Chemical short-range order (CSRO) at the B-site and the controllable excess interstitial oxygen (δ) in RP-CCOs are uncovered by neutron pair distribution function analysis. Reverse Monte Carlo analysis of the data, Metropolis Monte Carlo simulations, and extended x-ray absorption fine structure analysis implies a modest degree of magnetic element segregation on the local scale. Further, ab initio molecular dynamics simulations results obtained from special quasirandom structure disagree with experimentally observed CSRO but confirm Jahn–Teller distortion of CuO 6 octahedra. These findings highlight potential opportunities to control local order/disorder and excess interstitial oxygen in layered RP-CCOs and demonstrate a high degree of freedom for tailoring application-specific properties. They also suggest a need for expansion of theoretical and data modeling approaches in order to meet the innate challenges of CCO and related high-entropy phases.
36 MATERIALS SCIENCE↗
Comparing the influence of cation order and composition in simulated Zn(Sn, Ge)N 2 on structure, elastic moduli, and polarization for solid state lighting
Alloying and site ordering play complementary roles in dictating a material’s properties. However, deconvolving the impacts of these separate phenomena can be challenging. In this work, we simulate structures of Zn(Sn,Ge)N 2 with varied Sn content and site ordering to determine the impacts of order and composition on structural and electronic properties. We assess the formation enthalpy, lattice parameters, elastic constants, spontaneous polarization, and piezoelectric coefficients. In mostly disordered structures (order parameters ranging from 0.2 to 0.4), the formation enthalpy exhibits local extrema as a function of the order parameter, deviating from the more linear trends seen in both fully disordered and fully ordered systems. This anomalous deviation from the otherwise linear trend in formation enthalpy with order manifests in each of the other properties calculated. This range of order parameters of interest may be caused by a transition in the ordering of the quaternary material similar to phase changes seen in ternary compounds but stretched over a region inclduing 20% of the order parameter range. Most parameters calculated are more sensitive to order than to composition in the limited composition range tested; however, the lattice parameter c, piezoelectric coefficient e 33 , and elastic moduli C 12 , C 13 , and C 23 are more sensitive to composition. Of the properties compared, the piezoelectric coefficients are influenced most significantly by changes in both the composition and order parameter. Lattice parameters undergo the smallest changes with order and composition, but these small differences appear to impart large trends in the other properties. Better understanding the effects of disorder and group IV alloying in Zn(Sn,Ge)N 2 allows for more accurate modeling of characteristics of this material system for solid state lighting and other applications.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Clinopyroxenes from Apollo 12 and 14 - Exsolution, domain structure, and cation order.
Explore the source record for details and available documents.
Ghose, S.↗
The Fe2(+)-Mg interdiffusion in orthopyroxene: Constraints from cation ordering and structural data and implications for cooling rates of meteorites
Orthopyroxene crystals in a number of meteorites exhibit compositional zoning of Fe and Mg, which provide important constraint on their cooling rates. However, attempts to model cooling rate of these crystals from Fe-Mg zoning profiles suffer from the lack of any measured or theoretically well constrained Fe-Mg interdiffusion data in OP(x) It has been assumed that Fe-Mg interdiffusion in OP(x) only slightly slower than that in olivine. The purpose of this paper is to (1) calculate the Fe-Mg fractionation, and (2) provide analytical formulation relating cooling rate to the length of the diffusion zone across the interface of the overgrowth of a mineral on itself with application to Mg diffusion profile across OP(x) growth on OP(x) in certain mesosiderites.
Ganguly, J.↗
High-throughput investigation of the formation of double spinels
Spinel compounds, with the general chemical formula AB 2 O 4 , are a wide class of materials, where A and B can be a variety of cations, providing this structure with a great deal of functional flexibility and giving rise to its considerable scientific interest. Recently, a spinel with the general formula ABB'O 4 has been predicted, increasing the possible usability of the spinels due to the higher cation diversity in the so-called double spinel structure. In this study, we use density functional theory calculations to predict if double spinels can be formed between experimentally synthesized normal and inverse single spinels. Our computations reveal that 49 double spinels have negative mixing enthalpies and are thus thermodynamically stable, with most of the stable compounds being formed from one of two distinct cation orderings. We show that the 17 different cations that form the different double spinels have a preferred site, tetrahedral or octahedral, except for Mn, Fe and Co which can occupy both sites interchangeably. We also study the relation between mixing enthalpies and cation-specific properties, as well as ways to classify the double spinels into distinct types and spinel groups depending on the cation ordering and cation oxidation states, respectively. Furthermore, by applying the Sure Independence Screening and Sparsifying Operator (SISSO) approach on the coordination-dependent ionic radii of the elemental constituents, we show that an interplay of local strain and electrostatic dominated terms can be used to separate the double spinels into distinct structural types depending on the cation order and their oxidation states.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Unveiling and Mapping Polymorphs in Fluorite Y2TiO5 Using 4D-STEM and Unsupervised Machine Learning
Y2TiO5 belongs to the Ln2TiO5 (Ln = lanthanide or Y) family of ceramic materials and exhibits a range of desirable material properties such as radiation tolerance, frustrated magnetism, and large dielectric constant. However, understanding the complex crystal structure of Y2TiO5 remains elusive, given that Y2TiO5 can adopt multiple polymorphs such as cubic, orthorhombic, and hexagonal phases within the lattice. In this work, we report a detailed structural analysis of Y2TiO5 using four-dimensional scanning transmission electron microscopy coupled with unsupervised machine learning. The pyrochlore nanodomains, characterized by the ordered arrangement of yttrium cations on the A site of their A2BO5 structure, are present within the matrix of a predominantly fluorite-structured Y2TiO5 along with a third polymorph, the hexagonal phase. The pyrochlore phase is found to form 2 nm boundary regions around hexagonal phase stacking faults, highlighting the potential influence of the hexagonal phase on the occurrence and distribution of the pyrochlore phase. Lastly, we identify a unique pyrochlore phase with asymmetric arrangement of cation ordering along a single planar direction. Our findings provide invaluable insights into the possible mechanisms stabilizing pyrochlore nanodomains within the fluorite lattice of Y2TiO5.
36 MATERIALS SCIENCE↗
Using resonant energy X-ray diffraction to extract chemical order parameters in ternary semiconductors
II–IV–V 2 materials, ternary analogs to III–V materials, are emerging for their potential applications in devices such as LEDs and solar cells. Controlling cation ordering in II–IV–V 2 materials offers the potential to tune properties at nearly fixed compositions and lattice parameters. While tuning properties at a fixed lattice constant through ordering has the potential to be a powerful tool used in device fabrication, cation ordering also creates challenges with characterization and quantification of ordering. In this work, we investigate two different methods to quantify cation ordering in ZnGeP 2 thin films: a stretching parameter calculated from lattice constants , and an order parameter determined from the cation site occupancies ( S ). We use high resolution X-ray diffraction (HRXRD) to determine and resonant energy X-ray diffraction (REXD) to extract S . REXD is critical to distinguish between elements with similar Z -number ( e.g. Zn and Ge). We found that samples with a corresponding to the ordered chalcopyrite structure had only partially ordered S values. The optical absorption onset for these films occurred at lower energy than expected for fully ordered ZnGeP 2 , indicating that S is a more accurate descriptor of cation order than the stretching parameter. Since disorder is complex and can occur on many length scales, metrics for quantifying disorder should be chosen that most accurately reflect the physical properties of interest.
36 MATERIALS SCIENCE↗
Simulation and characterization of cation disorder in ZnGeP 2
New optoelectronic materials are needed for improving the efficiency and reliability of devices such as solar cells. Cation ordering presents one means of controlling optoelectronic properties while introducing potential to also diversify the mineral constituents of electronic devices; however, the mechanisms of ordering are not yet well understood. To better understand cation ordering in a system integratable with current devices, we assess short- and long-range order parameters of ZnGeP 2 , a material closely lattice matched to Si. Structures are simulated using cluster-based Monte Carlo and first-principles calculations to compare structural distortions, periodicity, and local coordination environments in ZnGeP 2 to experimental data both from the literature and presented here. Comparing order parameters, we relate the transition in order parameters of ZnGeP 2 to that of ZnGeP 2 , discuss the reduction of band gaps with disorder, and show that traditional structural characterization alone is insufficient for understanding order in ZnGeP 2 .
14 SOLAR ENERGY↗
Disorder-Tunable ZnGeP2 for Epitaxial Top Cells on Si
There has been a longstanding search for top cell materials for Si-based tandems. ZnGeP 2 is one material that could fit this need. It is lattice matched to Si and has the potential for tuning its band gap at fixed lattice constant via cation ordering. In this study, we investigate the effects of growth and annealing conditions on the structure of ZnGeP 2 thin films. Films were deposited amorphous and then annealed ex-situ. Using low anneal temperatures or short anneal times, we were able to kinetically trap the disordered phase. We also found composition to play a role in the degree of ordering in our films. Our findings support the hypothesis that ZnGeP 2 could be implemented as a material with tunable properties at fixed lattice constant through cation ordering.
14 SOLAR ENERGY↗
Importance of Superstructure in Stabilizing Oxygen Redox in P3‐Na 0.67 Li 0.2 Mn 0.8 O 2
Abstract Activation of oxygen redox represents a promising strategy to enhance the energy density of positive electrode materials in both lithium and sodium‐ion batteries. However, the large voltage hysteresis associated with oxidation of oxygen anions during the first charge represents a significant challenge. Here, P3‐type Na 0.67 Li 0.2 Mn 0.8 O 2 is reinvestigated and a ribbon superlattice is identified for the first time in P3‐type materials. The ribbon superstructure is maintained over cycling with very minor unit cell volume changes in the bulk while Li ions migrate reversibly between the transition metal and Na layers at the atomic scale. In addition, a range of spectroscopic techniques reveal that a strongly hybridized Mn 3d–O 2p favors ligand‐to‐metal charge transfer, also described as a reductive coupling mechanism, to stabilize reversible oxygen redox. By preparing materials under three different synthetic conditions, the degree of ordering between Li and Mn is varied. The sample with the maximum cation ordering delivers the largest capacity regardless of the voltage windows applied. These findings highlight the importance of cationic ordering in the transition metal layers, which can be tuned by synthetic control to enhance anionic redox and hence energy density in rechargeable batteries.
36 MATERIALS SCIENCE↗
Ultrahigh power and energy density in partially ordered lithium-ion cathode materials
There is an intensive search for high-performance cathode materials for rechargeable batteries. In this work the authors report that oxyfluorides with partial spinel-like cation order, made from earth-abundant elements, display both exceptionally high energy and power. The rapid market growth of rechargeable batteries requires electrode materials that combine high power and energy and are made from earth-abundant elements. In this paper we show that combining a partial spinel-like cation order and substantial lithium excess enables both dense and fast energy storage. Cation overstoichiometry and the resulting partial order is used to eliminate the phase transitions typical of ordered spinels and enable a larger practical capacity, while lithium excess is synergistically used with fluorine substitution to create a high lithium mobility. With this strategy, we achieved specific energies greater than 1,100 Wh kg -1 and discharge rates up to 20 A g -1 . Remarkably, the cathode materials thus obtained from inexpensive manganese present a rare case wherein an excellent rate capability coexists with a reversible oxygen redox activity. Our work shows the potential for designing cathode materials in the vast space between fully ordered and disordered compounds.
25 ENERGY STORAGE↗
Realizing continuous cation order-to-disorder tuning in a class of high-energy spinel-type Li-ion cathodes
Conventional Li-ion cathode materials are dominated by well-ordered structures, in which Li and transition metals occupy distinct crystallographic sites. Here, we show in this paper that profoundly new degrees of freedom for the optimization of electrochemical properties may be accessed if controllable cation disorder is introduced. In a class of high-capacity spinel-type cathode materials, we identify cation to anion ratio in synthesis as a key parameter for tuning the structure continuously from a well-ordered spinel, through a partially ordered spinel, to rocksalt. We find that the varying degree of cation disorder modifies the voltage profile, rate capability, and charge-compensation mechanism in a rational and predictable way. Our results indicate that spinel-type order is most beneficial for achieving high-rate performance as long as the cooperative 8a to 16c phase transition is suppressed, while more rocksalt-like disorder facilitates O redox, which can increase capacity. Our findings reveal an important tuning handle for achieving high energy and power in the vast space of partially ordered cathode materials.
25 ENERGY STORAGE↗
A formal Fe III/V redox couple in an intercalation electrode
Iron redox cycling between low-valent oxidation states of Fe II and Fe III drives crucial processes in nature. The Fe II/III redox couple charge compensates the cycling of lithium iron phosphate, a positive electrode (cathode) for lithium-ion batteries. High-valent iron redox couples, involving formal oxidation higher than Fe III , could deliver higher electrochemical potentials and energy densities. However, because of the instability of high-valent Fe electrodes, they have proven difficult to probe and exploit in intercalation systems. Here, in this study, we report and characterize a formal Fe III/V redox couple by revisiting the charge compensation mechanism of (de)lithiation in Li 4 FeSbO 6 . Valence-sensitive experimental and computational core-level spectroscopy reveal a direct transition from Fe III (3d 5 ) to a negative-charge-transfer FeV (3d 5 L 2 ) ground state on delithiation, without forming Fe IV , or oxygen dimers. We identify that the cation ordering in Li 4 FeSbO 6 drives a templated phase transition to stabilize the unique Fe V species and demonstrate that disrupting cation ordering suppresses the Fe III/V redox couple. Exhibiting resistance to calendar aging, high operating potential and low voltage hysteresis, the Fe III/V redox couple in Li 4 FeSbO 6 provides a framework for developing sustainable, Fe-based intercalation cathodes for high-voltage applications.
Ramachandran, Hari [Stanford Univ., CA (United Sta↗
Layered Double Perovskites
Successful strategies for the design of crystalline materials with useful function are frequently based on the systematic tuning of chemical composition within a given structural family. Perovskites with the formula ABX 3 , perhaps the best-known example of such a family, have a vast range of elements on A, B, and X sites, which are associated with a similarly vast range of functionality. Layered double perovskites (LDPs), a subset of this family, are obtained by suitable slicing and restacking of the perovskite structure, with the additional design feature of ordered cations and/or anions. In addition to inorganic LDPs, we also discuss hybrid (organic-inorganic) LDPs here, where the A-site cation is a protonated organic amine. Several examples of inorganic LDPs are presented with a discussion of their ferroic, magnetic, and optical properties. The emerging area of hybrid LDPs is particularly rich and is leading to exciting discoveries of new compounds with unique structures and fascinating optoelectronic properties. We provide context for what is important to consider when designing new materials and conclude with a discussion of future opportunities in the broad LDP area.
Materials Science↗
Effects of Calcination Conditions on the Structural and Electrochemical Behaviors of High‐Nickel, Cobalt‐Free LiNi 0.9 Mn 0.1 O 2 Cathode
Abstract Eliminating cobalt from high‐nickel layered oxide cathodes lowers the cost of lithium‐ion batteries for electric vehicles. However, cobalt‐free cathodes with high Mn 4+ and Ni 2+ contents are prone to Li/Ni mixing after synthesis, potentially compromising battery energy density, rate capability, and cycling stability. Without cobalt facilitating cation ordering in the layered structure, the degree of Li/Ni mixing in cobalt‐free cathodes depends heavily on the calcination conditions. In this study, a systematic exploration of calcination temperatures and LiOH ratio for LiNi 0.9 Mn 0.1 O 2 (NM‐90) provides detailed insights into the optimal synthesis conditions for high‐capacity cobalt‐free cathodes with extended cycle life. Surprisingly, high Li/Ni mixing does not necessarily lead to poor cycling stability whereas low Li/Ni mixing does not guarantee a long cycle life. More importantly, although excessive calcination temperature can further decrease Li/Ni mixing, it does not necessarily enhance capacity. Instead, the pernicious effects from the H2 → H3 phase transition are amplified due to a pronounced two‐phase reaction. An extensive suite of chemical and structural characterization methods uncovers a correlation between elevated calcination temperature, phase transformation, cation ordering, and capacity fading behavior: “overcooking” high‐nickel, cobalt‐free cathodes induce structural arrangement toward that of LiNiO 2 , with exacerbated lattice distortion and surface instability accelerating capacity fade.
Lee, Steven↗