Search NASA⌕ Search

SEARCH · Search NASA

Results for “cationic dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Impact of exposure to brine/CO 2 on the mechanical and transport properties of the Mt. Simon Sandstone

When sandstone rocks are exposed to CO 2 -saturated brine, their transport and mechanical properties can, potentially, change due to chemical reactions as a result of such exposure. This paper investigates changes in the flow-through characteristics, porosity, and the mechanical properties of Mt. Simon Sandstone samples caused by such exposure to brine/CO 2 . A core, extracted from the Mt. Simon formation, was first characterized for its porosity and relevant transport properties, and it was then aged for over 500 hr in CO 2 -saturated brine at formation-relevant pressure, temperature, and confining stress conditions. The deformation of the sample was measured in situ during aging via strain gauges attached to the core's surface. Following the aging experiment, the sample's porosity and transport properties were again analyzed. Our experiments show that both the porosity and permeability of the Mt. Simon sandstone sample increase due to exposure to brine/CO 2 , with the impact on permeability being more significant. The deformation measurements employing strain gauges indicate a weakening of the core material. Analysis of the composition of the brine at the conclusion of the testing reveals changes, specifically, an increase in the concentration of several of the cations. These changes are indicative of mineral/clay dissolution, consistent with the porosity, permeability, and strain gauge measurements.

58 GEOSCIENCES↗
DOE OSTI2020

Investigation and Analysis of Dolomite Dissolution in Variable Strength Systems Relevant to the WIPP

The Waste Isolation Pilot Plant (WIPP) was opened in 1999 as a solution to the long-term disposal of the nation's nuclear defense-generated transuranic (TRU) waste. The salt beds were recommended as the ideal location because they are free from flowing fresh water, easily mined, impermeable, and geologically stable. However, for performance assessment modeling, release scenarios must be considered. The most likely release scenario was determined to be human intrusion leading to direct and/or long-term brine release (US DOE 1995, US DOE 1996, Perkins et al., 1999). The focus of this research is the Rustler formation because it is located above the WIPP and is the most transmissive layer (Perkins et al., 1999). Objective: To determine the effect of chelating ligands ( e.g. EDTA) on dissolution of dolomite in high ionic strength systems. Do brines impact dolomite dissolution and how is it affected by EDTA binding with cations? By varying the ionic strengths, different brine conditions can be simulated similar to those in and around the Culebra member and evaluate trends of dissolved Ca and Mg in the aqueous phase from the quantified data. Conclusions: <2% of dolomite dissolved over one week at pH 8.5. Greater dissolution occurred at higher ionic strength and in the presence of NaCl with approximately 0.4 vs. 0.9% of Mg removed from dolomite in 0.1 and 1.0 M Na. Further, 0.3 vs. 0.9% of Mg was removed from dolomite in 1.0 M IS CaCl{sub 2} versus NaCl. EDTA increased dissolution of dolomite at low ionic strength due to its strong complexation affinity for Ca/Mg with slightly greater removal of Ca than Mg. Significant differences were not observed at high ionic strength due to the presence of large concentrations of competing cations (Na, Ca, Mg). Slightly higher concentrations of Ca were removed from dolomite than Mg after one week, suggesting either incongruent dissolution or release through ion exchange of Ca from trace mineral impurities. Further, when EDTA was present, it may have increased Ca removal due to its greater complexation for Ca than Mg. Environmental Implications: High ionic strength brines and low ionic strength solutions with organic ligands increase dissolution of dolomite. Due to the long half-lives of radionuclides in the TRU waste, it may be important to consider the long term impact of dolomite dissolution for potential release scenarios.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Well-designed Crosslinked Polymer Electrolyte Enables High Ionic Conductivity and Enhanced Salt Solvation

A new facile single-step method to fabricate crosslinked polymer electrolyte membranes consisting of branched poly(ethyleneimine), (PEI) and poly(ethylene oxide), (PEO) is demonstrated. The membranes exhibit excellent ionic conductivity (1.2 × 10 –3 S cm –1 at 80 °C) with minimal addition of plasticizer (20 wt%). The amine functional group in the PEI-PEO crosslinked matrix provides Lewis basic and hydrogen bonding characteristics that facilitate the dissolution of lithium salt and enables a higher cation transport number than a PEO crosslinked matrix. The glass transition temperature, degree of crystallinity, and room temperature storage modulus increases with decreasing crosslink density and increasing ratio of free amines. The resultant ionic conductivity and mechanical strength can be flexibly tailored by varying the molar ratio of free amine moieties in the crosslinked PEI-PEO matrix. This study provides an improved synthesis method, in-depth characterization, and fundamental insights on the effect of free amine moieties on the transport properties of a highly conductive gel polymer electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mark-18A Cold Runs

The Savannah River National Laboratory (SRNL) is tasked by the National Nuclear Security Administration (NNSA) to recover highly valued isotopes from irradiated Mark-18A (Mk-18A) targets. The Savannah River Site (SRS) has sixty-five Mk-18A targets available for the recovery of the high valued materials. The sixty-five Mk-18A targets are currently stored in the L-Area Basin and will be removed one at a time and individually transported to SRNL. Upon receipt at SRNL, the Mk-18A target material will be removed from the confinement, dissolved, chemically separated, and calcined to a stable oxide. The flowsheet is designed to recover the plutonium as well as the trivalent actinides. The remaining unrecovered material will be discarded to the high activity drain (HAD) system in SRNL. A specially designed cask was procured for transport of the targets from L-Area to SRNL. Once received at SRNL, the targets will be loaded into the back of Cell 7 and resized as they enter the cell. The resized targets (1/4 lengths) will then be processed one at a time through the following processes: caustic dissolution and filtration; acidic dissolution and filtration, Reillex anion exchange, diglycolamide (DGA) cation exchange; and DGA calcination. This processing will result in two product streams. The first is an aqueous plutonium solution which will be removed from the shielded cells and taken to a glovebox for further purification and conversion to an oxide. The second is a calcined oxide containing the Am and Cm as well as other lanthanide fission products which will be removed from the shielded cells using a bagless transfer system. Both materials will be packaged for shipment to Oak Ridge National Laboratory (ORNL). All equipment to carry out this process was designed, procured or fabricated, and installed in a mock-up facility (716-4A) at SRS to allow for simulation testing in a non-radioactive area. This equipment was then dismantled and transferred from 716-4A to 773-A and installed in the SRNL Shielded Cells. After installation in the shielded cells facility testing was performed using water followed by surrogates and cold chemicals. Issues were identified during these evaluations, including equipment issues as well as technical challenges. Many of the issues were rectified during performance of the cold runs, and the remaining have a resolution identified. Table ES-1 provides a summary of all issues identified during the cold run operations, as well as the status and identified resolutions to outstanding issues.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Multiscale molecular simulations for the solvation of lignin in ionic liquids

Lignin, the second most abundant biopolymer found in nature, has emerged as a potential source of sustainable fuels, chemicals, and materials. Finding suitable solvents, as well as technologies for efficient and affordable lignin dissolution and depolymerization, are major obstacles in the conversion of lignin to value-added products. Certain ionic liquids (ILs) are capable of dissolving and depolymerizing lignin but designing and developing an effective IL for lignin dissolution remains quite challenging. To address this issue, the COnductor-like Screening MOdel for Real Solvents (COSMO-RS) model was used to screen 5670 ILs by computing logarithmic activity coefficients (ln(γ)) and excess enthalpies (H E ) of lignin, respectively. Based on the COSMO-RS computed thermodynamic properties (ln(γ) and H E ) of lignin, anions such as acetate, methyl carbonate, octanoate, glycinate, alaninate, and lysinate in combination with cations like tetraalkylammonium, tetraalkylphosphonium, and pyridinium are predicted to be suitable solvents for lignin dissolution. The dissolution properties such as interaction energy between anion and cation, viscosity, Hansen solubility parameters, dissociation constants, and Kamlet–Taft parameters of selected ILs were evaluated to assess their propensity for lignin dissolution. Furthermore, molecular dynamics (MD) simulations were performed to understand the structural and dynamic properties of tetrabutylammonium [TBA] + -based ILs and lignin mixtures and to shed light on the mechanisms involved in lignin dissolution. MD simulation results suggested [TBA] + -based ILs have the potential to dissolve lignin because of their higher contact probability and interaction energies with lignin when compared to cholinium lysinate.

09 BIOMASS FUELS↗
DOE OSTI2023

Stabilizing Ni-rich layered cathode for high-voltage operation through hierarchically heterogeneous doping with concentration gradient

High-nickel LiNi x Mn y Co 1-x-y O 2 (NMC) cathodes have demonstrated superior energy density, yet their stability is compromised under high voltage conditions. To address this, here we propose a strategy of heterogeneous doping with a concentration gradient, specifically through Sr–Zr co-modification. We synthesized Ni-rich NMC particles featuring several micron-sized secondary particles composed of micron-sized primary grains. This design aims to harness the structural robustness of single-crystalline grains and the favorable diffusion kinetics of polycrystalline secondary particles. Systematic characterization using a combination of electrochemical measurements and synchrotron analytics reveals an intriguing pattern of hierarchically heterogeneous Sr–Zr co-doping. It demonstrates a depth-dependent concentration gradient at the secondary particle level and competing dopant segregation over the buried grain boundaries. This unique characteristic creates opportunities for enhancing battery performance, particularly by optimizing precursors and implementing advanced modulation techniques. We also investigate the dissolution and precipitation of the cathode's transition metal cations upon high-voltage cycling. These insights suggest that a tailored compositional variation can be a viable approach to effectively design the next-generation high-Ni NMC cathode materials for high-voltage lithium batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Acidic Oxygen Evolution Reaction Activity–Stability Relationships in Ru-Based Pyrochlores

Ru-based oxygen evolution reaction (OER) catalysts show significant promise for efficient water electrolysis, but rapid degradation poses a major challenge for commercial applications. In this work, we explore several Ru-based pyrochlores (A 2 Ru 2 O 7 , A = Y, Nd, Gd, Bi) as OER catalysts and demonstrate improved activity and stability of catalytic Ru sites relative to RuO 2 . Furthermore, we combine complementary experimental and theoretical analysis to understand how the A-site element impacts activity and stability under acidic OER conditions. Among the A 2 Ru 2 O 7 studied herein, we find that a longer Ru–O bond and a weaker interaction of the Ru 4d and O 2p orbitals compared with RuO 2 results in enhanced initial activity. We observe that the OER activity of the catalysts changes over time and is accompanied by both A-site and Ru dissolution at different relative rates depending on the identity of the A-site. Pourbaix diagrams constructed using density functional theory (DFT) calculations reveal a driving force for this experimentally observed dissolution, indicating that all compositions studied herein are thermodynamically unstable in acidic OER conditions. Theoretical activity predictions show consistent trends between A-site cation leaching and OER activity. These trends coupled with Bader charge analysis suggest that dissolution exposes highly oxidized Ru sites that exhibit enhanced activity. Overall, using the stability number (molO2 evolved/molRu dissolved) as a comparative metric, the A 2 Ru 2 O 7 materials studied in this work show substantially greater stability than a standard RuO2 and commensurate stability to some Ir mixed metal oxides. Finally, the insights described herein provide a pathway to enhanced Ru catalyst activity and durability, ultimately improving the efficiency of water electrolyzers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Calorimetric Study of Functionalized Uranyl Peroxide Nanoclusters and Their Monomeric Building Block

The description of the energy landscape of polyoxometalates (POMs) enriches our understanding of their solution behavior through quantitative information that can be used to predict their existence, stability, and properties. Herein, we report thermodynamic values that describe the energy landscape of four uranyl peroxide nanoclusters (UPCs) (LiRb–U@U 24 , LiNa–U 24 Pp 12 , NaK–U 24 Pp 12 , and U 60 Ox 30 ) and a building block of UPCs, lithium uranyl triperoxide monomer (Li–UT). Furthermore, the results reveal relationships between the affinity of counter cations and the anionic uranyl peroxide units, enthalpy of dissolution, as well as enthalpy of crystallization and cluster solubility. Additionally, the calorimetric measurements of Li–UT allowed us to calculate a favorable enthalpy of formation of Li–U 24 and Li–U 28 from their monomeric units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Elemental characterization of crystalline silicotitanate following Hanford tank waste processing

To expedite vitrification of low activity waste at the Hanford Site, a Tank-Side Cesium Removal system is being evaluated. This method utilizes an inorganic ion exchange (IX) media, crystalline silicotitanate (CST), to remove 99.9% of the 137Cs from tank waste supernate. Laboratory scale testing of the ion exchange process has been conducted by Pacific Northwest National Laboratory to evaluate Cs removal with CST in supernates collected from Hanford tanks 241-AP-107 and 241-AW-102 under prototypic plant operating conditions. In an effort to understand the selectivity and partitioning of other analytes toward CST, specifically Resource Conservation and Recovery Act (RCRA) hazardous metals, selected +2 cations, and transuranic elements, a method for the complete dissolution of CST and Cs removal from the digestate was applied to the spent CST post-processing Hanford tank waste. The CST was shown to adsorb a relevant fraction of Ca, Cd, Pb, Sr, and potentially Fe by IX and/or other mechanisms. The spent CST also adsorbed actinides, including U, Pu, Np, and Am. This work discusses digestion of CST and removal of Cs from the digestate allowing effective analysis and provides insight as to what analytes may be competing for IX sites on the CST media.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2022

Effect of Ni2+, Zn2+, and Co2+ on green rust transformation to magnetite

In this study, we investigated Ni2+, Zn2+, and Co2+ mineralogical incorporation and its effect on green rust transformation to magnetite. Mineral transformation experiments were conducted by heating green rust suspensions at 85 °C in the presence of Ni2+, Zn2+, or Co2+ under strict anoxic conditions. Transmission electron microscopy and powder X-ray diffraction showed the conversion of hexagonal green rust platelets to fine grained cubic magnetite crystals. The addition of Ni2+, Zn2+, and Co2+ resulted in faster rates of mineral transformation. The conversion of green rust to magnetite was concurrent to significant increases in metal uptake, demonstrating a strong affinity for metal sorption/ co-precipitation by magnetite. Dissolution ratio curves showed that Ni2+, Zn2+, and Co2+ cations were incorporated into the mineral structure during magnetite crystal growth. The results indicate that the transformation of green rust to magnetite is accelerated by metal impurities, and that magnetite is a highly effective scavenger of trace metals during mineral transformation. The implications for using diagenetic magnetite from green rust precursors as paleoproxies of Precambrian ocean chemistry are discussed.

Hydrosulfate green rust↗
DOE OSTI2020

Phyllosilicate mineral dissolution upon alkaline treatment under aerobic and anaerobic conditions

The dissolution of phyllosilicate minerals exposed to high-pH environments has been studied to determine the influence of alkaline treatments and variable redox conditions on clay dissolution and the potential formation of new phases via incongruent dissolution phenomena. The present study focused on the dissolution of phyllosilicate minerals (illite, muscovite, and montmorillonite) under anaerobic and aerobic conditions using comparative solutions (sodium hydroxide and ammonium hydroxide) at similar ionic strength in the presence and absence of oxygen. Our batch data show that there is a rapid decrease in aluminum dissolution (< 240 hrs) and slow increase in silica over time (up to 1440 hrs). This trend was particularly evident for montmorillonite which shows the greatest dissolution for ammonium hydroxide, likely due to intercalation of the polyatomic cation ammonium into the mineral’s expandable layers. When comparing alkaline treatments, the strong base, sodium hydroxide, dissolved more of the mica minerals, illite and muscovite, likely due to ion-pairing between the silicate tetrahedra [SiO4]n- and Na+ cations in solution. In addition, redox conditions affect the systems similarly with treatment, although the sodium hydroxide treatment results in greater variability in solution redox conditions. For all investigated phyllosilicates, the calculated aqueous aluminum and silicon ratios over time are significantly different from the minerals’ stoichiometric ratios. As a result, we conclude that incongruent dissolution occurred and suggest formation of secondary precipitates. Understanding the potential for clay mineral alterations from interaction with alkaline solutions has implications for in situ remediation, mining operations, and waste interactions with the subsurface. This research shows that incongruent dissolution is likely and will lead to secondary precipitation which may have long term physical and chemical impacts in the subsurface.

mineral dissolution, phyllosilicate, alkaline, amm↗
DOE OSTI2025

Toward Stable, High‐Energy, Partially Disordered Mn‐Rich Spinel Cathodes by Revealing and Mitigating Surface Degradation

Mn-rich cathodes balance performance and sustainability but suffer from limited cyclability due to Mn dissolution and cathode-to-anode crosstalk. The Jahn-Teller (J-T) effect of Mn 3+ is often linked to the above phenomena, such as in spinel LiMn 2 O 4 . However, in typical voltage ranges, significant Mn 3+ only appears near the end of discharge, highlighting the need to reassess its role in driving Mn dissolution, structural degradation, and battery performance. Here, the spinel cathode's degree of disorder is tailored to expand the Mn redox range, enabling segmentation into J-T active and less active voltage ranges. Cycling at segmented voltage windows reveals surface degradation mechanisms with and without the major J-T effect. Despite a stronger J-T effect below 3.6 V vs. Li/Li + , Mn dissolution is less significant than above 3.6 V. Expanding the cycling window to 2.0–4.3 V causes severe degradation as the J-T active range induces a tetragonal phase and Mn 2+ -rich surface, driving Mn dissolution and consuming Li-ion inventory in full cells. Reducing electrolyte acidity minimizes Mn 3+ disproportionation, enabling a stable dopant-free Mn-only cathode with a 250 mAh g −1 specific capacity. These findings demonstrate that full cells using Mn-rich cathodes have the potential to avoid the notorious crosstalk problem through electrolyte engineering.

25 ENERGY STORAGE↗
DOE OSTI2021

Dissolution kinetics of a sodium borosilicate glass in Tris buffer solutions: impact of Tris concentration and acid (HCl/HNO 3 ) identity

Here, understanding the corrosion behavior of glasses in near-neutral environments is crucial for many technologies including glasses for regenerative medicine and nuclear waste immobilization. To maintain consistent pH values throughout experiments in the pH = 7 to 9 regime, buffer solutions containing tris(hydroxymethyl)aminomethane (“Tris”, or sometimes called THAM) are recommended in ISO standards 10993-14 and 23317 for evaluating biomaterial degradation and utilized throughout glass dissolution behavior literature—a key advantage being the absence of dissolved alkali/alkaline earth cations (i.e. Na + or Ca 2+ ) that can convolute experimental results due to solution feedback effects. Although Tris is effective at maintaining the solution pH, it has presented concerns due to the adverse artificial effects it produces while studying glass corrosion, especially in borosilicate glasses. Therefore, many open questions still remain on the topic of borosilicate glass interaction with Tris-based solutions. We have approached this topic by studying the dissolution behavior of a sodium borosilicate glass in a wide range of Tris-based solutions at 65 °C with varied acid identity (Tris–HCl vs. Tris–HNO 3 ), buffer concentration (0.01 M to 0.5 M), and pH (7–9). The results have been discussed in reference to previous studies on this topic and the following conclusions have been made: (i) acid identity in Tris-based solutions does not exhibit a significant impact on the dissolution behavior of borosilicate glasses, (ii) ~0.1 M Tris-based solutions are ideal for maintaining solution pH in the absence of obvious undesirable solution chemistry effects, and (iii) Tris–boron complexes can form in solution as a result of glass dissolution processes. The complex formation, however, exhibits a distinct temperature-dependence, and requires further study to uncover the precise mechanisms by which Tris-based solutions impact borosilicate glass dissolution behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

First-Principles Examination of Multiple Criteria of Organic Solvent Oxidative Stability in Batteries

Oxidative instability of the liquid electrolyte at or near battery cathode oxide surfaces has significant detrimental effects on batteries. Organic solvent molecules are often the fuel and precursors of such degradation processes, releasing electrons and protons that react with cathode oxides and electrolyte anions. These reactions contribute to cathode–electrolyte interphase (CEI) film formation, transition-metal ion dissolution, and phase transformation of the surface regions of the cathode. Here we apply density functional theory calculations to examine four criteria of oxidative stability (oxidation potential, hydrogen removal energies, and initial reactivity on two types of oxide facets) using four different solvent/additive molecules (ethylene carbonate, fluoroethylene carbonate, 1,3-dioxolane, and dimethyl ether). The ranking of molecular stability differs with each criterion. Surprisingly, the all-oxygen-terminated basal planes of layered oxides exhibit lower reaction barriers than spinel surface facets with exposed transition-metal cations, especially for ether solvents; the calculations also suggest basal planes contribute to the dissolution of transition-metal ions. Further, the structure–degradation relation complexity underscores the challenge of understanding the function of the CEI but also offers a guide to future degradation-mitigation strategies including facet engineering. Our predictions and models help establish a framework for future studies relevant to high-voltage conditions.

25 ENERGY STORAGE↗
NASA NTRSDate not supplied

Investigating Fifth Oxide Effect on CMXAS Glass Properties

Coatings for hot section aero turbine engine structural materials are subject to thermochemical degradation after interacting with calcium-magnesium-aluminosilicates (CMAS). Molten CMAS viscosity is the primary glass property of importance, correlating with coating infiltration and reaction depth. CMAS viscosity was measured using a spindle-dipped viscometer at temperatures between 1300-1550°C in 25°C increments. Experimental data were compared to Thermo-Calc and FactSage computational models, which showed good agreement with experimental trends. CMXAS compositions, where X denotes a fifth oxide, of Ca30.75-Mg9-X5-Al13-Si42.25 (single cation oxide mol%) for X = Fe2+, Fe3+, Gd3+, Hf4+, Na1+, Ti4+, Y3+, Yb3+, Zr4+ additions were used. Oxide precipitation was observed in X = Hf4+ , Zr4+ CMXAS specimens, indicating coating dissolution is an increased threat for T ≥ 1390°C. Molten CMAS and CMXAS viscosity measurements were shown to correlate with net cation field strength, offering an alternative in property prediction where thermodynamic data are unavailable.

Clark Avery Luckhardt↗
DOE OSTI2024

Geochemical-hydromechanical couplings during water-serpentinized harzburgite interactions at 20° C and 30 bars

Interaction of groundwater with the serpentinized harzburgites of the upper mantle plays an important role in the geologic carbon cycle and serpentinization processes. Here, in this study, an intact serpentinized harzburgite with more than 60% lizardite from the Semail ophiolite in Oman was reacted with water at near neutral pH and low PCO 2 to observe its dissolution behavior and reaction path within the CaO-MgO-SiO 2 -CO 2 -H 2 O system at 20 °C and 30 bars. In the experiment, mass (i.e. H 2 O, ions) transfer is by diffusion and the selected temperature and pressure conditions mimic water-rock interactions at the shallow portions of most ultramafic rock hosted aquifers. Equilibrium activity-activity diagrams and thermodynamic data were used to compare the experimentally determined reaction path with the theoretical stability boundaries for minerals involved to investigate the evolution of bulk chemical composition, mineralogy, and water composition. The experiments demonstrated that (i) the water-rock interactions increased the pH of the aqueous phase from 5.9 to 7.5 over a period of 18 weeks; (ii) the dissolution of lizardite, orthopyroxene (enstatite), and clinopyroxene (diopside and augite) increased the concentration of Mg, Ca, and Si in the aqueous phase; (iii) the dissolution was incongruent with respect to Mg and Si, favoring Si release at pH > 6 due to (a) breaking of more reactive cation‑oxygen bonds that is consistent with the stoichiometry of magnesium for proton exchange reaction which favors a surface that is enriched in Mg at basic conditions, and (b) preferential dissolution of clinopyroxene Mg 1.30 Ca 0.52 Fe 0.06 Si 2 O 6 ; (iv) the aqueous phase was undersaturated with respect to carbonate (e.g. calcite, magnesite, and hydromagnesite) and hydrous (e.g. lizardite, chrysotile, brucite, and talc) minerals; (v) the bulk chemical composition and mineralogy of the intact serpentinized harzburgite matrix did not change; (vi) the thermodynamic data can successfully predict water-intact serpentinized harzburgite behavior if the water chemical composition can be constrained; and (vii) no detectable macroscopic form of damage (e.g. microcracks forming as a result of differential stress fields due to changes in volume during chemical reaction) was observed.

Carbonation↗
DOE OSTI2024

Understanding Europium and Terbium Speciation and Ion Pairing in Carbonate Complexes Using Advanced Spectroscopy Techniques

Lanthanide (Ln) elements are critical materials that are typically extracted/mined together. Their separation by solvent extraction from acidic media is well known; however, there are few studies in basic media with carbonate anions. We investigated the complexation of Eu(III) and Tb(III) carbonates as solids and solutions in alkaline K2CO3, wherein we sought to access a Tb(IV) carbonate complex through ozonolysis. L3-edge XANES of Eu and Tb carbonate solids, colorless solutions, and a red-hued Tb solution (obtained by ozonolysis) all showed Ln(III) cations. The absence of evidence for a Tb(IV) complex was confirmed through XAS and EPR analyses, despite the solution exhibiting a deep red color. For solids and solutions, EXAFS results indicate molecular Ln(III)-carbonato anions. In terms of the Eu(III) carbonate coordination number, the coordination does not change upon dissolution of the solid sample. Furthermore, EXAFS for the solutions revealed evidence for the association of potassium cations with the Ln(III)-carbonato anions. Furthermore, this direct observation of contact ion pairing by EXAFS at room temperature is rare. The insights into Ln(III) carbonate complexation and solution speciation afforded by XANES-EXAFS, FT-IR, and EPR provides perspectives that serve as benchmarks for future computational and experimental efforts focused on caustic-side solvent extraction of Ln(III) ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2022

Abundant phosphorus expected for possible life in Enceladus’s ocean

Saturn’s moon Enceladus has a potentially habitable subsurface water ocean that contains canonical building blocks of life (organic and inorganic carbon, ammonia, possibly hydro-gen sulfide) and chemical energy (disequilibria for methanogenesis). However, its habit-ability could be strongly affected by the unknown availability of phosphorus (P). Here, we perform thermodynamic and kinetic modeling that simulates P geochemistry based on recent insights into the geochemistry of the ocean–seafloor system on Enceladus. We find that aqueous P should predominantly exist as orthophosphate (e.g., HPO422), and total dissolved inorganic P could reach 1027to 1022mol/kg H2O, generally increasing with lower pH and higher dissolved CO2, but also depending upon dissolved ammonia and silica. Levels are much higher than<10210mol/kg H2Ofrompreviousestimatesand close to or higher than∼1026mol/kg H2O in modern Earth seawater. The high P concentration is primarily ascribed to a high (bi)carbonate concentration, which decreases the concentrations of multivalent cations via carbonate mineral formation, allowing phosphate to accumulate. Kinetic modeling of phosphate mineral dissolution suggests that geologically rapid release of P from seafloor weathering of a chondritic rocky core could supply millimoles of total dissolved P per kilogram of H2Owithin105y, much less than the likely age of Enceladus’s ocean (108to 109y). These results provide further evidence of habitable ocean conditions and show that any oceanic life would not be inhibited by low P availability.

Enceladus ocean↗