Search NASA⌕ Search

SEARCH · Search NASA

Results for “cell temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Cracked Solar Cell Performance Depends on Module Temperature

When cells in a crystalline silicon photovoltaic module crack, packaging materials hold the fragments together. Changes in module temperature cause cell fragments to move, allowing cracked metallization to lose and regain contact. We intentionally cracked cells in commercial PV modules and characterized the modules’ temperature-dependent electroluminescence (EL) response. Here we show that (1) metallization makes contact across cracks in a way that is temperature dependent and (2) this contact is not a function of temperature, but is hysteretic. We expect that any electro-optical characterization made at a single temperature will be misleading as to the effects of cracked cells at different temperatures. And we expect that a single temperature sweep cannot fully characterize the temperature dependence of electro-optical performance of modules with cracked cells.

crack↗
DOE OSTI2024

High-angular-momentum Rydberg states in a room-temperature vapor cell for dc electric-field sensing

We prepare and analyze Rydberg states with orbital quantum numbers ℓ ≤ 6 using three-optical-photon electromagnetically induced transparency (EIT) and radio frequency (rf) dressing, and employ the high- ℓ states in electric-field sensing. Rubidium-85 atoms in a room-temperature vapor cell are first promoted into the 25 F 5 / 2 state via Rydberg-EIT with three infrared laser beams. Two rf dressing fields then (near-)resonantly couple the 25 F , 25 H ( ℓ = 5 ) , and 25 I ( ℓ = 6 ) Rydberg states. The dependence of the rf-dressed Rydberg-state level structure on rf powers, rf and laser frequencies is characterized using EIT. Furthermore, we discuss the principles of dc-electric-field sensing using high- ℓ Rydberg states and experimentally demonstrate the method using test electric fields of ≲ 50 V/m induced via photo-illumination of the vapor-cell wall. We measure the highly nonlinear dependence of the dc-electric-field strength on the power of the photo-illumination laser. Numerical calculations, which reproduce our experimental observations well, elucidate the underlying physics. Our paper is relevant to high-precision spectroscopy of high- ℓ Rydberg states, Rydberg-atom-based electric-field sensing, and plasma electric-field diagnostics. Published by the American Physical Society 2024

Duspayev, Alisher (ORCID:0000000153225762)↗
DOE OSTI2022

Reference Cell Performance and Modeling on a One-Axis Tracking Surface: Preprint

Performance of five silicon-based reference cells is examined on a single-axis tracking surface. The reference cells' output are modeled using one-minute sampled spectral irradiance and reference cell temperature measurements. The model also incorporates spectral responsivity data for the reference cell. The transmission of light through the glazing multiplies the sum over all appropriate wavelengths of temperature adjusted reference cell responsivity times the measured spectral irradiance. Modeled reference cell output is compared with measured reference cell output under clear sky and totally cloudy sky conditions. For each reference cell the ratio of modeled to measured output varies by less than 2% over the year.

modeling↗
DOE OSTI2024

High throughput battery failure experimental platform

Addressing the need to increase the sample set to understand the causes of lithium battery thermal runaway, we conceived of an experimental platform with capability to increase the number of runaway experiments (currently 3-5 per week), while also collecting detailed electrochemical impedance spectroscopy measurements (EIS). Once expanded, the platform would enable data collection on 10s to 100s of cells that all experience runaway, thereby creating a statistical database necessary to identify early indication of risk. A primary containment unit to house cylindrical cells of variety NMC811 and of size 21700 (21 mm diameter by 70 mm length) was designed with features such as debris containment, preloaded cells in an exchangeable port, nitrogen ventilation, and exhaust containment. We performed the first overcharge abuse experiments of several 21700 cells, handpicked because of different initial EIS, and demonstrated that EIS changes dramatically during early stages of overcharge, but in a different manner than previous pouch cell experiments. The abuse experiments also revealed the discharge pattern and debris field created during runaway, as well as the cell temperature control and overheat, that must be considered in the primary containment apparatus. We designed and built a switching relay system to permit measurement of EIS without an active charging circuit, and created instrument control software for charging, EIS, and cell temperature control. The late-start funding was insufficient to fully construct the primary containment unit, but the foundational design and knowhow is available for any future work.

25 ENERGY STORAGE↗
DOE OSTI2020

High Performing and Durable Pyrophosphate Based Composite Membranes for Intermediate Temperature Fuel Cells [Slides]

Objective: Develop a novel proton conducting electrolyte operating at >200°C with conductivity σ ≥ 100 mScm –1 and RH < 1%. Fabrication of membranes of less than 40μm thickness while retaining high conductivity will result in ASR <0.04 Ωcm 2 . Evaluate membrane durability in terms of crossover, shorting resistance, and open circuit voltage, as well as against temperature cycling. Relevance: Operating FCs in the intermediate temperature range has the potential to greatly reduce cost and simplify water and thermal management. This effort requires novel materials and approaches to meet DOE membrane performance and durability targets. MPP/Polymer composite membranes show promise in early development for application in IT-FCs for transportation applications. Approach: We have demonstrated that both cation dopants and phosphate precursor influence MPP conductivity and identified the most promising MPP compositions for membrane fabrication. The ceramic MPP materials are fabricated as a composite membrane in a 90:10 wt% ratio with Nafion. We have modified our membrane fabrication procedure to improve the density of our membranes. Accomplishments: We demonstrated through-plane membrane conductivity of 95mScm -1 at T > 200°C and RH<0.04bar with a thickness 50μm. We demonstrated FC performance up to 94hrs at 220°C and <1% RH with a 50μm thick membrane exhibiting an OCV of 0.98V and ASR of 0.08 Wcm 2 . Future work: Further decrease in ASR is expected by decreasing the membrane thickness to <40μm. ITPP with higher P:M ratio will be used to increase the conductivity of the starting material. Long term durability will be assessed against DOE technical targets

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Comparative Study and Validation of Photovoltaic Model Formulations for the IBPSA Modelica Library based on Rooftop Measurement Data

Domain-overarching system models are crucial to investigate sector coupling concepts. Specifically, the coupling of building and electrical energy systems becomes crucial to integrate renewable energy sources such as photovoltaic power systems (PV). For such interdisciplinary simulation models, Modelica is a suitable language. However, most open-source Modelica libraries are either domain-specific or lack simple-to-parameterize PV models. We close this gap by developing a PV model for the IBPSA Modelica library. The model comprises two I-V-characteristic models and three mounting-dependent approaches to calculate the cell temperature. The I-V-characteristic models follow a single- and two-diodes approach. This study uses measurement data from a rooftop PV system in Berlin, Germany, for validation. The focus lies on comparing the implemented single- and two-diodes approach. Results prove that both models accurately calculate the modules’ DC power output and cell temperature. The two-diodes approach slightly outperforms the single-diode one at the expense of a higher parameterization effort.

Maier, Laura↗
DOE OSTI2021

Scaling plant responses to high temperature from cell to ecosystem

Plant survival and productivity decrease with exposure to less favourable environments. The negative effects of environmental factors such as water-deficit and salinity stress on vegetation are relatively well studied, primarily due to the large losses in crop yield and forest biomass caused by these stresses. Although the impact of combined heat and drought on plants has received considerable interest in recent years due to climate change, there has been less focus on ascertaining the impact of heat stress alone at a range of temporal and spatial scales. The steady increase in global mean temperatures and (more importantly) variability in extreme temperatures is translating into more frequent and extreme heat stress episodes, which in turn reduce plant productivity. Further, projected increases in both day and night temperatures and the predicted impact of these changes on agricultural and forest productivity have drawn attention to the need to better address the direct effects of heat on plants. In particular, there has been tremendous interest in understanding the short- and long-term effects of heat at the cellular and whole-plant levels, including work on crops of agricultural importance and species from less managed ecosystems. Hence, we made a concerted effort in this Special Issue to capture recent progress in our ability to quantify the impact of heat stress, and identify new tools and approaches that have been developed and implemented to capture a wide range of responses in plants. The series of reviews and research articles presented here captures our current understanding of plant physiological and molecular responses to heat stress, as well as covering phenotyping methods, genetic diversity and potential routes through which plants can acclimate and adapt to warming climates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Editorial for the Virtual Special Issue of Journal of Power Sources “Low temperature fuel cells and electrolysers” - Science and engineering: Let's play this game hand in hand!

Electrochemistry is already and will increasingly be amongst the major drivers of our energetic mix decarbonization, so to fight anthropogenic global warming. The hydrogen economy vector (ideally produced in water electrolysers using renewable electricity and transformed back into electricity in fuel cells), in parallel with the conversion of carbon dioxide and nitrogen gas into value-added products are seen as pillars of the so-called green and sustainable Energy Revolution. The hydrogen technologies presently attract increasing interest, their momentum growing irremediably in Europe, Asia and Americas. Here, this Virtual Special Issue (VSI) gathers the latest scientific results of major research laboratories worldwide, all addressing various aspects of electrochemical energy and material conversion processes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Energetics of Base–Acid Pairs for the Design of High-Temperature Fuel Cell Polymer Electrolytes

The interaction energy of base–acid plays a key role in acid retention of phosphoric acid (PA)-doped polymer electrolytes under fuel cell operating conditions. Here, we investigate the energetics of proton-accepting and hydroxide-donating organic bases using density functional theory calculations. Because of their weak basicity, proton-accepting organic bases such as benzimidazole have relatively low interaction energy with the acid in the absence of water (15.3–28.0 kcal mol –1 ). Energetics of the proton-accepting base–PA complex increases by adding water, indicating that the interactions in the base–acid complex strengthen in the presence of water. On the other hand, hydroxide-donating organic bases, such as tetramethylammonium hydroxide, have high interaction energy with PA (~110 kcal mol –1 ), which remains high in the presence of water. The chemical shifts of 31P NMR support the energetics of the base–acid complexes. Overall, this study further discusses the benefit of incorporating hydroxide-donating organic bases into the polymeric structure over proton-accepting bases as a way to increase acid retention.

25 ENERGY STORAGE↗
DOE OSTI2024

Dual Mode Intermediate Temperature Fuel Cell: Liquid Fuels and Electricity - CRADA 351 (Abstract)

FuelCell Energy, Inc. (FCE) in collaboration with Pacific Northwest National Laboratory (PNNL), The University of Connecticut (UCONN), The Energy and Environmental Research Center at The University of North Dakota (EERC-UND), and Massachusetts Institute of Technology (MIT), has entered into a co-operative agreement with the U.S. Department of Energy Advanced Research Project Agency – Energy (ARPA-E), agreement number DE-AR0000503, to develop an electrochemical device for conversion of methane gas to a usable liquid product, such as methanol or formaldehyde. The objective of this CRADA is to develop the anode electro-catalyst for the aforementioned electrochemical cell during Q1-Q8. PNNL will utilize thermodynamic modeling, batch-mode reactor screening and button-scale electrochemical testing to develop this anode."

09 BIOMASS FUELS↗
DOE OSTI2023

Compact high temperature electrochemical cell stack architecture

An electrochemical cell unit comprises a first electrochemical cell comprising a first oxidant electrode and a first fuel electrode, and a second electrochemical cell comprising a second oxidant electrode and a second fuel electrode. An interconnect interposed between the first electrochemical cell and the second electrochemical cell. The interconnect comprises an interconnect main body defining a longitudinal channel along a longitudinal axis thereof. The interconnect main body includes a plurality of corrugations defining a plurality of fuel channels on a first surface of the interconnect main body facing the first electrochemical cell, and a plurality of oxidant channels on a second surface of the interconnect main body facing the second electrochemical cell. Each of the plurality of fuel channels and the plurality of oxidant channel positioned around the longitudinal channel.

Brown, Casy Cloudless↗
DOE OSTI2020

Design and performance of high-temperature furnace and cell holder for in situ spectroscopic, electrochemical, and radiolytic investigations of molten salts

To facilitate the development of molten salt reactor technologies, a fundamental understanding of the physical and chemical properties of molten salts under the combined conditions of high temperature and intense radiation fields is necessary. Optical spectroscopic (UV–Vis–near IR) and electrochemical techniques are powerful analytical tools to probe molecular structure, speciation, thermodynamics, and kinetics of solution dynamics. In this paper, we report the design and fabrication of three custom-made apparatus: (i) a multi-port spectroelectrochemical furnace equipped with optical spectroscopic and electrochemical instrumentation, (ii) a high-temperature cell holder for time-resolved optical detection of radiolytic transients in molten salts, and (iii) a miniaturized spectroscopy furnace for the investigation of steady-state electron beam effects on molten salt speciation and composition by optical spectroscopy. Initial results obtained with the spectroelectrochemical furnace (i) and high-temperature cell holder (ii) are reported.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗