Search NASA⌕ Search

SEARCH · Search NASA

Results for “chemical additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Impact of Laboratory-Accelerated Aging Methods to Study Alkali–Silica Reaction and Reinforcement Corrosion on the Properties of Concrete

This study focuses on two separate investigations of the main aging mechanisms: alkali–silica reactivity (ASR) and the corrosion of reinforcing steel (rebar) concrete, both of which may result in a premature failure to meet the serviceability or strength requirements of a concrete structure. However, these processes occur very slowly, spanning decades. The impact of direct chemical additives to fresh concrete to accelerate ASR and the corrosion of reinforcing steel on the fresh and hardened properties of the ensuing material are investigated to inform the potential use of chemicals in large-scale studies. The deterioration of reinforced concrete (RC) is determined by means of expansion, cracking, bulk diffusivity and surface resistivity measurements, and compressive, split tensile and flexural strength tests. The results indicate that the addition of sodium hydroxide and calcium chloride can effectively accelerate the crack formation and propagation in concrete due to ASR and the corrosion of rebar, respectively. The ASR-induced cracks maintained a constant crack width from 0.05 mm to 0.1 mm over the measurement period regardless of the intensity of aging acceleration. Adding 4% chloride by weight of cement for accelerating rebar corrosion resulted in an average crack that was 82% larger than in the case of ASR accelerated with the addition of sodium hydroxide. The addition of alkali resulted in an increase in early-age (7-day) strength. At a total alkali loading of 2.98 kg/m3, 3.84 kg/m3 and 5.57 kg/m3, the 28-day compressive strength of concrete decreased by 3%, 10% and 24%, respectively. Similarly, a higher early-age strength and a lower later-age strength was observed for the concrete in the presence of corrosive calcium chloride. The results from this research are expected to inform future studies on the long-term performance of RC structures under accelerated ASR and corrosion.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tunable structure and reinforcement of polyvinyl alcohol (PVA) hydrogels using fungal chitin particles

Polysaccharides, including chitin, are one of the most abundant biopolymers in nature and are increasingly recognized as a sustainable alternative to petroleum-derived plastics and synthetic fillers in polymer composites. Traditionally sourced from crustacean shells, chitin offers mechanical strength and biocompatibility with limitations also in processability and functionality. Fungal-derived chitin material represents a promising alternative, with advantages including scalable fermentation on low-cost substrates, absence of shellfish allergens, and tunable molecular architectures that vary by species, developmental stage, and growth environment. Here, in this study, we systematically examined chitinous materials obtained from taxonomically and functionally distinct fungi, Laccaria bicolor, Trichoderma reesei and Rhizopus oryzae, to assess their structural, chemical, and morphological properties as reinforcement agents in polymer composites. Mild alkaline pretreatment was employed to obtain mycelium chitin particles, thereby improving accessibility to chitin and co-occurring β-D-glucans while maintaining microparticle integrity. Comprehensive FTIR and solid-state NMR analyses revealed species-specific differences in chemical composition and microstructure, with R. oryzae exhibiting a unique spectral signature. These fungal-derived chitin were then incorporated into poly(vinyl alcohol) (PVA) hydrogels, where they acted as reinforcing fillers without the need for additional chemical crosslinkers. Comparative evaluation of hydrogel properties demonstrated that fungal chitin significantly enhanced mechanical performance, with all mycelium fillers mitigating the water weakening in PVA hydrogels. R. oryzae-derived composites tripled the hydrogel tensile strength while the submicron fibrous morphology in L. bicolor contributes to over 45 % tensile improvement in dry PVA composites. Our findings highlight the potential of fungal biomass as a tunable, sustainable platform for producing chitin-based reinforcing agents.

Chitin↗
DOE OSTI2020

Report for Department of State (DoS) V-Fund Project "Tying Moment Tensor Solutions to Explosive Yield"

The goal of this study was to use U.S. nuclear explosions with known source parameters (yield, depth, shot point material and/or parameters) to determine moment-derived yield estimates. This work has been accomplished by performing full moment tensor solutions using regional network data from the LLNL network, and other regional broadband stations. As part of this study, we have calculated solutions for 130 U.S. nuclear explosions and 12 additional chemical explosions. We then take several approaches to using moment tensors to estimate yield, considering both the full and isotropic moment tensors, doing straight regression analysis on the whole dataset, then successively refining the calibration with additional information about material and overburden. We have also tried a completely new approach of using the seismic moment to help estimate the radiated seismic energy and tying this to yield through a seismic efficiency. Results appear to be promising, but more work might be required to make this more useful in an operational sense.

58 GEOSCIENCES↗
DOE OSTI2020

Reduced Models for Chemical Kinetics derived from Parallel Ensemble Simulations of Stirred Reactors

Detailed chemical kinetic models are essential to improve the predictive capability of computational fluid dynamics (CFD) simulations and to impact the development of next generation combustion technologies. However, such detailed kinetic models are beyond the reach of CFD codes due to the computational cost of transporting additional chemical degrees of freedom. Reduced order models for combustion kinetics exploit the presence of lower dimensional manifolds in the state space and require far fewer number of scalars to be transported as part of CFD simulations. In this paper, we describe the software infrastructure developed to allow large ensembles of stirred reactor configurations with detailed chemical kinetics. The canonical reactor simulations are incorporated in a workflow with sparse grid and data reduction methodologies aimed at development of reduced order models. We present results from analyzing the results of the stirred reactor calculations for syngas mixture using principal component analysis (PCA) and neural network methodologies. The results show that nonlinear autoencoder model can surpass PCA in representing the original dataset with far fewer degrees of freedom.

Zhang, Pei↗
DOE OSTI2022

Effects of non-thermal termolecular reactions on detonation development in hydrogen (H 2 )/methane (CH 4 ) - air mixtures

The binary fuel blend of H 2 /CH 4 is one of the most promising hydrogen-enriched hydrocarbon fuels in spark-ignition (SI) engines. Yet, the undesirable phenomenon of super-knock, which can severely and in-stantaneously damage an SI engine, limits its widespread adoption. Moreover, there is still a lack of con-sensus on the precise mechanism by which this phenomenon occurs i.e. via flame acceleration or spon-taneous ignition, despite numerous previous investigations. At the same time, recent studies [M. P. Burke, S. J. Klippenstein, Nat. Chem. 9 (2017) 1078 -1082, Y. Tao, A. W. Jasper, Y. Georgievskii, S. J. Klippenstein, R. Sivaramakrishnan, Proc. Combust. Inst. 38 (2021) 515-522] have demonstrated a high probability of occurrence of non-thermal reactions in premixed flames of such H 2 /CH 4 fuel blends with air due to the presence of non-trivial amounts of highly reactive radicals including H, O and OH apart from O 2 . The present study focuses on the evolution of an initial deflagration front to a detonation wave in H 2 /CH 4 - air mixtures under SI engine relevant conditions through fully resolved, constant volume 1D simulations with and without non-thermal reactivity. Non-thermal reactions were included in the macroscopic kinetics model as chemically termolecular reactions facilitated by the H + CH 3 and H + OH radical-radical recombination and the H + O 2 radical-molecule association reactions. Further, the nonthermal reactions result in a corresponding decrease in the reaction fluxes of the incipient recombination/association reactions. Therefore, an additional set of simulations were performed by applying corrections to the respective incipient recombination/association rate constants using the methodology demonstrated by Tao et al. [Y. Tao, A. W. Jasper, Y. Georgievskii, S. J. Klippenstein, R. Sivaramakrishnan, Proc. Combust. Inst. 38 (2021) 515-522]. Compared to the baseline case, the onset of spontaneous ignition in the end-gas region was observed to be delayed in the presence of non-thermal termolecular reactions. Concurrently, the developing detonation was observed to be significantly stronger. In contrast, applying corrections to the recombi-nation/association rate constants resulted in a completely different behavior. Specifically, detonation was observed to occur due to self acceleration of the primary flame in the absence of spontaneous ignition in the end-gas region. Sensitivity analysis was performed to quantify the effects of non-thermal reactions on the duration of heat release rate and thereby the mechanism of detonation formation. In addition, chemical explosive mode analysis (CEMA) was performed to identify the dominant species/reactions re-sponsible for the observed results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Exploring filamentous fungi depolymerization of corn stover in the context bioenergy queuing operations

Recalcitrance of lignocellulosic feedstocks to depolymerization is a significant barrier for bioenergy production approaches that require conversion of monomeric carbohydrates to renewable energy sources. This study assesses how low-cost modifications in the feedstock supply chain can be transformed into targeted pretreatments in the context of the entire bioenergy supply chain. The aim of this research is to overcome the physiochemical barriers in corn stover that necessitate increased severity in conversion in terms of chemical loading, temperature, and residence time. Corn stover samples were inoculated with a selective (Ceriporiopsis subvermispora) and non-selective (Phaenarochaete chrysosporium) lignin degrading filamentous fungal strains, then stored aerobically to determine the working envelope for fungal pretreatment to achieve lignin degradation. Dry matter loss and gross chemical makeup of corn stover varied by the length of treatment (2 and 4 weeks) and by the moisture content of the treated corn stover samples (40 and 60%, wet basis). Dry matter loss in P. chrysosporium inoculated biomass was elevated compared to the C. subvermispora inoculated biomass; however, treatment also induced additional chemical composition changes suggestive of depolymerization. Scanning electron microscope images reveal hyphae attached within cell lumen and suggest structural changes within P. chrysosporium treated corn stover after 60% moisture storage. These results highlight that fungal treatment approaches must balance loss of convertible material with the potential for reduction in recalcitrance. Techno-economic assessment (TEA) of fungal pretreatment in a short-term queuing system indicated the viability of this approach compared to conventional queuing operations. The total queuing system cost was estimated at $\$$1.65/tonne of biomass stored. After applying the credit of $\$$1.48/tonne from energy savings in the conversion phase using fungal pretreated biomass, the total system cost was $0.80 lower than traditional biomass queueing approach. While the TEA results suggested that treating biomass with C. subvermispora is the most economically viable storage method in the designed fungal-assisted queuing system, future research should focus on additional fungal depolymerization such as those observed in the P. chrysosporium inoculated biomass.

09 BIOMASS FUELS↗
DOE OSTI2021

Separation of cobalt, nickel, and manganese in leach solutions of waste lithium-ion batteries using Dowex M4195 ion exchange resin

Current methods to separate and recover critical metals from waste lithium-ion battery (LIB) scrap require multiple unit operations that involve selective leaching and a combination of separation methods. These methods include impurity removal, solvent extraction, ion exchange, and precipitation, to achieve high purity Co and Ni products. In this paper an efficient extraction strategy was developed to individually separate Ni and Co from a LIB leachate that was generated from an electrochemical leaching process. By using Dowex M4195 resin, as the only method of separation, additional impurity removal operations were not needed. After loading and eluting, three different fractions were obtained: 99.0% Ni concentrate, 98.5% Co concentrate, and a Li/Mn rich concentrate allowing the separation of Ni, Co and Mn. Here, the developed process is then presented as an alternative for metal recovery from leachates from scrap LIBs with minimum chemical addition and pH adjustment.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effects of Plasma on Physical Properties of Water: Nanocrystalline-to-Amorphous Phase Transition and Improving Produce Washing

Washing fresh produce using Plasma-activated water recently became a promising eco-friendly alternative to using chemical additives such as Chlorine. We discuss the produce-washing experiments that illustrate that addition of plasma to washing water is a multi-faced phenomena. Not only it increases the sterilization ability of water by killing pathogens, but it also has improved washibility: the ability to remove pathogens from the cleaning surface. We propose an explanation of these features based on the recently discoveries that many physical and chemical properties of water change their temperature dependence between about 35 and 60 degrees Celsius. In particular, heat conductance, light absorption, and surface tension all change their temperature dependence. These drastic changes were associated with water gradually changing its mesoscopic structure: while at the higher temperatures water is a uniform media (amorphous state), at the temperatures below transition it consists of many nano-to-micro-scale clusters (crystalline state). This transition is similar to the second order phase transition. In the present paper we propose that treating water with non-thermal plasma (adding plasma-created active compounds) can lower the temperature of the transition and thus cause a significant change in such physical quantities as surface tension, viscosity, freezing rate, and wettability and washability.

He, Jinjie↗
DOE OSTI2024

The water-soluble fraction of extracellular polymeric substances from a resource recovery demonstration plant: characterization and potential application as an adhesive

Currently, there is a growing interest in transforming wastewater treatment plants (WWTPs) into resource recovery plants. Microorganisms in aerobic granular sludge produce extracellular polymeric substances (EPS), which are considered sustainable resources to be extracted and can be used in diverse applications. Exploring applications in other high-value materials, such as adhesives, will not only enhance the valorization potential of the EPS but also promote resource recovery. This study aimed to characterize a water-soluble fraction extracted from the EPS collected at the demonstration plant in the Netherlands based on its chemical composition (amino acids, sugar, and fatty acids) and propose a proof-of-concept for its use as an adhesive. This fraction comprises a mixture of biomolecules, such as proteins (26.6 ± 0.3%), sugars (21.8 ± 0.2%), and fatty acids (0.9%). The water-soluble fraction exhibited shear strength reaching 36–51 kPa across a pH range of 2–10 without additional chemical treatment, suggesting a potential application as an adhesive. The findings from this study provide insights into the concept of resource recovery and the valorization of excess sludge at WWTPs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Advanced Brine Processing to Enable U.S. Lithium Independence (CRADA Report)

Current production of LiOH, which is needed to make Li-ion battery cathode active materials, utilizes a multistep process including solar evaporation, precipitation with Na 2 CO 3 and then conversion to LiOH using Ca(OH) 2 . This process requires a large amount of land area for solar evaporation, the right weather conditions, and chemicals for the conversion process that result in NaCl and CaCO 3 waste products. The production of Ca(OH) 2 is very energy intensive and evolves significant quantities of CO 2 . An alternative process flow utilizing direct lithium extraction techniques, followed by a chemical free conversion process can have benefits in reducing the needed land requirements and chemicals for traditional brine processing. There are many potential direct lithium extraction technologies that are currently being developed. The direct lithium extraction process from typical brine sources will produce a LiCl solution with some impurities including typically high concentrations of Na. This brine then needs to be converted to LiOH for use in battery cathode production. Ideally this conversion could occur without the use of additional chemicals. Electrochemistry can do this conversion either via electrolysis or bipolar membrane electrodialysis (BPED) to produce LiOH and HCl in solution. BPED utilized bipolar membranes to split water, which has a reduced potential as compared to splitting water at electrodes into hydrogen and oxygen gas. This reduced potential required results in a significant energy savings for BPED over electrolysis methods. This CRADA project aimed to develop such an integrated process using direct lithium extraction followed by BPED to produce a LiOH solution. That solution can then be crystallized into battery grade LiOH. In particular, Albemarle utilized a direct lithium extraction process to produce a concentrated LiCl solution that could be used for the BPED process. The BPED process was first tested using various LiCl solutions with impurity ions added at bench scale to understand the effects of impurities and determine processing parameters. Then testing was performed using the direct lithium extracted brine at the bench scale before scaling the process up. After the process was scaled up a long duration test was carried out to estimate the lifetime of the membranes, which is key to the economics of the BPED process.

25 ENERGY STORAGE↗
DOE OSTI2022

Additive‐Free, Low‐Temperature Crystallization of Stable α‐FAPbI 3 Perovskite

Abstract Formamidinium lead triiodide (FAPbI 3 ) is attractive for photovoltaic devices due to its optimal bandgap at around 1.45 eV and improved thermal stability compared with methylammonium‐based perovskites. Crystallization of phase‐pure α‐FAPbI 3 conventionally requires high‐temperature thermal annealing at 150 °C whilst the obtained α‐FAPbI 3 is metastable at room temperature. Here, aerosol‐assisted crystallization (AAC) is reported, which converts yellow δ‐FAPbI 3 into black α‐FAPbI 3 at only 100 °C using precursor solutions containing only lead iodide and formamidinium iodide with no chemical additives. The obtained α‐FAPbI 3 exhibits remarkably enhanced stability compared to the 150 °C annealed counterparts, in combination with improvements in film crystallinity and photoluminescence yield. Using X‐ray diffraction, X‐ray scattering, and density functional theory simulation, it is identified that relaxation of residual tensile strains, achieved through the lower annealing temperature and post‐crystallization crystal growth during AAC, is the key factor that facilitates the formation of phase‐stable α‐FAPbI 3 . This overcomes the strain‐induced lattice expansion that is known to cause the metastability of α‐FAPbI 3 . Accordingly, pure FAPbI 3 p–i–n solar cells are reported, facilitated by the low‐temperature (≤100 °C) AAC processing, which demonstrates increases of both power conversion efficiency and operational stability compared to devices fabricated using 150 °C annealed films.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Extremely Bright, Near-IR Emitting Spontaneously Blinking Fluorophores Enable Ratiometric Multicolor Nanoscopy in Live Cells

New bright, photostable, emission-orthogonal fluorophores that blink without toxic additives are needed to enable multicolor, live-cell, single-molecule localization microscopy (SMLM). Here we report the design, synthesis, and biological evaluation of Yale676sb, a photostable, near-IR-emitting fluorophore that achieves these goals in the context of an exceptional quantum yield (0.59). When used alongside HMSiR, Yale676sb enables simultaneous, live-cell, two-color SMLM of two intracellular organelles (ER + mitochondria) with only a single laser and no chemical additives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Advancing Post-Combustion CO 2 Capture through Increased Mass Transfer and Lower Degradation

The over-arching goal of the proposed project is to develop three techniques to enable aqueous post-combustion CO 2 capture technologies to meet the DOE performance and cost targets of 90% CO 2 capture, 95% purity, at a cost of less than $30/tonne CO 2 captured. This will be accomplished by the development of materials and processes to increase mass transfer in the absorber and reduce the environmental impacts. While constantly working to reduce the cost of CO 2 capture via solvent development and process & heat integration, increasing CO 2 mass transfer through development of custom dynamic packing materials and tuning solvent physical properties may offer a route to increased solvent capacity, lower energy consumption and reduced aerosol formation. The environmental concerns that have been identified in amine-based CO 2 capture systems, nitrosamines specifically, are another critical element that will be addressed in this project. The specific objectives of the project were to: 1) conduct detailed studies to understand how solvent physical properties and aerosol formation are impacted by additives; 2) quantify the CO 2 mass transfer improvement from the dynamic polarity packing in the absorber and the additive-modified solvent using the existing UK bench-scale CO 2 capture unit; 3) quantify the energy consumption savings associated with enhanced mass transfer; 4) quantify the benefits of the UK’s electrochemical cell to decompose nitrosamines; and 5) collect the necessary information/data to conduct a high-level TEA assessment of the proposed technologies. The project involved the fabrication and installation of customized dynamic polarity packing and an investigation into the understanding of the impact of chemical additives on solvent properties to increase CO 2 mass transfer in the absorber column, and lastly the design of an electrochemical cell to decompose nitrosamines in a water wash. After both systems were fabricated, they were tested at UK facilities, including on the bench-scale CO 2 capture unit under parametric and long-term operation.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Full Moment Tensor Solutions of U.S. Underground Nuclear Tests for Event Screening and Yield Estimation

Moment tensor (MT) solutions are proving increasingly valuable in explosion monitoring, especially now that they are more routinely calculated for the unconstrained, full (six component) MT. In this study, we have calculated MTs for U.S. underground nuclear tests conducted at the Nevada National Security Site using seismic recordings primarily from the Livermore Nevada Network. We are able to determine them for 130 nuclear explosions from 1970 to 1996 for a range of yields and under a variety of material conditions, which we have supplemented with 10 additional chemical explosions at the test site. The result is an extensive database of MTs that can be used to assess the performance of important monitoring tasks such as event identification and yield determination. We test the explosion event screening on the fundamental lune of the MT eigensphere and find MT screening to be a robust discriminant between earthquakes and explosions. We then explore the estimation of moment-derived yield, in which we find that material properties are the largest contributor to differences in the estimated moment-to-yield ratio. Additionally, further research conducted on this dataset can be used to develop, test, and improve various explosion monitoring methodologies.

58 GEOSCIENCES↗
DOE OSTI2021

Corrosion Behavior of Laser-Interference Structured AA2024 Coated with a Chromate-Containing Epoxy Primer

In this study, the corrosion behavior of laser-interference treated AA2024-T3 specimens, which are coated with a primer, is presented. The surface of as-received AA2024-T3 specimens were laser-interference structured by splitting the primary beam of a Q-switched Nd:YAG pulsed nanosecond laser into two beams and focusing them to the same spot on the specimen surface. After being stored in plastic cases for up to 70 d, without any additional cleaning, the specimens were spray painted with a chromate-containing epoxy primer, CA7233, compliant to MIL-PRF-23377 Type I Class C2 specification. The corrosion behavior of laser-interference specimens was assessed against that of specimens prepared by chromated conversion coating and sulfuric acid anodizing treatments. After the ASTM B117 corrosion exposure, it was found that the laser processed specimens exhibited only few blisters. On one hand, most specimens prepared at a laser fluence of 1.78 J/cm 2 , without any additional chemical cleaning, were found to develop one very small blister after only 96 h of exposure. However, the growth of these blisters was not significant even after 1,000 h of salt spray exposure. On the other hand, only a fraction of the specimens prepared at a laser fluence of 1.24 J/cm 2 and acetone wiped right after the laser structuring were found to develop several tiny blisters after 790 h and longer exposure. Overall, it was found that the corrosion damage was minimized at a laser rastering speed of 4 mm/s, a condition for which only 33% of specimens developed very minor corrosion damage. Furthermore, the ASTM D1654 creepage ratings, which was used to evaluate the corrosion damage along the scribe lines, were found to be at least nine for all coated panels. These results indicate that the laser-interference technique with the additional acetone wiping has the potential to be further developed as a nonchemical surface preparation technique for chromate-containing epoxy primers coating systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Scalable & Non-Destructive Characterization Strategy to Study Semiconductor/Dielectric Interfaces and Predict Wafer-Level Device Performance

The defect density present at the dielectric-semiconductor interface in an MOS structure directly influences the channel carrier characteristics in semiconductor devices, especially in wide bandgap material systems used in power devices. While these trap defects are typically quantified through electrical characterization of MOS-capacitor test structures, this treatment offers very little insight into the physical nature of interface defects. Such shortcomings demand a physical characterization strategy to guide fabrication optimization. X-ray photoelectron spectroscopy (XPS) is suggested as a viable technique to determine chemical data for dielectric interfaces formed using atomic layer deposition (ALD) on GaN substrates. Previously, 1-D XPS characterization has confirmed the presence of a Ga x O y interlayer between ALD dielectrics and the GaN substrate. In this work, XPS data is serially collected to form 2-D images of an ALD-Al 2 O 3 /GaN interface as a proof-of-concept experiment for in-situ XPS quality monitoring during ALD processing. The information provided by this work reveals some of the challenges for incorporating XPS characterization as an in-situ strategy during fabrication of GaN-based devices. Separately, electrical mapping of a 2-D array of ALD-Al 2 O 3 /GaN MOS-capacitor devices provide a means to quantify the spatial variations in interface quality across a single wafer. Physical characterization techniques, such as time-of-flight secondary ion mass spectroscopy, provide additional chemical information about the Al 2 O 3 /Ga x O y /GaN structure that complement the electrical mapping results. This analysis shows that a higher Ga x O y content correlates with higher interface state defects for trap energies deep in the band gap.

42 ENGINEERING↗
DOE OSTI2023

Detection and confirmation of fentanyls in high clay‐content soil by electron ionization gas chromatography‐mass spectrometry

Abstract Detection of illicit drugs in the environment, particularly in soils, often suggests the present or past location of a clandestine production center for these substances. Thus, development of efficient methods for the analysis and detection of these chemicals is of paramount importance in the field of chemical forensics. In this work, a method involving the extraction and retrospective confirmation of fentanyl, acetylfentanyl, thiofentanyl, and acetylthiofentanyl using trichloroethoxycarbonylation chemistry in a high clay‐content soil is presented. The soil was spiked separately with each fentanyl at two concentrations (1 and 10 μg/g) and their extraction accomplished using ethyl acetate and aqueous NH 4 OH (pH ~ 11.4) with extraction recoveries ranging from ~56% to 82% for the high‐concentration (10 μg/g) samples while ranging from ~68% to 83% for the low‐concentration (1 μg/g) samples. After their extraction, residues containing each fentanyl were reacted with 2,2,2‐trichloroethoxycarbonyl chloride (Troc‐Cl) to generate two unique and predictable products from each opioid that can be used to retrospectively confirm their presence and identity using EI‐GC‐MS. The method's limit of detection (MDL/LOD) for Troc‐norfentanyl and Troc‐noracetylfentanyl were estimated to be 29.4 and 31.8 ng/mL in the organic extracts. In addition, the method's limit of quantitation for Troc‐norfentanyl and Troc‐noracetylfentanyl were determined to be 88.2 and 95.5 ng/mL, respectively. Collectively, the results presented herein strengthen the use of chloroformate chemistry as an additional chemical tool to confirm the presence of these highly toxic and lethal substances in the environment.

Valdez, Carlos A.↗