Search NASA⌕ Search

SEARCH · Search NASA

Results for “climatology data products”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Can ERA5 Be Used to Study Mesoscale Convective System Climatological Characteristics?

Mesoscale convective systems (MCSs) produce more than half of tropical rainfall and are central to the global hydrologic cycle. As the climate warms, environments favorable for MCSs may become more common; however, limited observational records hamper understanding of how MCSs respond to variations and changes in their environments. Here, we evaluate how well MCSs are represented in ERA5, a widely used global high‐resolution reanalysis product. Using PyFLEXTRKR, which jointly tracks top‐of‐atmosphere infrared brightness temperature and surface precipitation, we identified MCSs in ERA5 and compared them with those identified in satellite observations using the same detection algorithm. This comparison analysis spans 2007–2020 using hourly data at 0.25° horizontal resolution focusing over the tropics. ERA5 reproduces observed brightness‐temperature statistics and captures the geographic distribution and seasonal and diurnal cycles of MCS cold cloud shields. However, ERA5 precipitation exhibits an intensity bias—too much light rain and too little heavy rain—which shifts the rain‐rate distribution and reduces the frequency of MCSs relative to observations. Within MCSs, ERA5 precipitation exhibits the same pattern of bias, yielding a systematic underestimation of MCS precipitation intensity. Consistent with these biases, ERA5 underestimates the contribution of MCS to tropical rainfall by 25%–34% in key regions. Overall, ERA5 is suitable for studying MCS cold cloud‐shield climatology and evolution, but precipitation‐based MCS characteristics (including event‐level precipitation features and the geospatial distribution of MCS precipitation) should be interpreted with caution. These findings clarify which aspects of MCS behavior are robustly represented in ERA5 for climatological applications.

mesoscale convection↗
DOE OSTI2022

Further improvement and evaluation of nudging in the E3SM Atmosphere Model version 1 (EAMv1): simulations of the mean climate, weather events, and anthropogenic aerosol effects

Abstract. A previous study on the use of nudging in E3SM Atmosphere Model version 1 (EAMv1) had an unresolved issue; i.e., a simulation nudged to EAMv1's own meteorology showed non-negligible deviations from the free-running baseline simulation over some of the subtropical marine stratocumulus and trade cumulus regions. Here, we demonstrate that the deviations can be substantially reduced by (1) changing where the nudging tendency is calculated in the time integration loop of a nudged EAM simulation so as to improve consistency with the free-running baseline and (2) increasing the frequency of the constraining data so as to better capture strong sub-diurnal variations. The fact that modification (2) improves the climate representativeness of the nudged simulations has motivated us to investigate whether the use of newer reanalysis products with higher data frequency can help improve nudged hindcast simulations by better capturing the observed weather events. To answer this question, we present simulations conducted at EAMv1's standard horizontal resolution (approximately 1∘) with nudging towards 6-hourly ERA-Interim reanalysis or 6-hourly, 3-hourly, or hourly ERA5 reanalysis. These simulations are evaluated against the climatology of free-running EAMv1 simulations as well as reanalyses, satellite retrievals, and in situ measurements from the Atmospheric Radiation Measurement user facility. For the 1∘ EAMv1 simulations, we recommend using the relocated nudging tendency calculation and the ERA5 reanalysis at 3-hourly or higher frequency. Simulations used for estimating the anthropogenic aerosol effects often use nudging to help discern signal from noise. The sensitivity of such estimates to the configuration of nudging is investigated in EAMv1, again using the standard 1∘ horizontal resolution. We find that, when estimating the global mean effects, the frequency of constraining data has relatively small impacts, while the choice of nudged variables can change the results substantially. The nudging of air temperature (in addition to horizontal winds) has two non-negligible effects. First, when the constraining data come from reanalysis, the nudging-induced mean bias correction can cause significant changes in the simulated clouds and hence substantially different estimates of the aerosol effects. The impact of the mean bias correction on ice cloud formation has been noted in previous studies and is also seen in EAMv1. For applications like ours, where the preferred configurations of nudging are those capable of providing results consistent with the multi-year free-running simulations, the consequence of the mean bias correction is undesirable. The second important impact of temperature nudging is a significant suppression of adjustments to aerosol forcing, which also causes changes in the estimated aerosol effects. This effect can be seen in simulations nudged to either reanalysis or EAM's own meteorology. These results suggest that nudging horizontal winds but not temperature is a better choice for estimating the anthropogenic aerosol effects.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Identification of Climatological Representative Days in the Mid-Atlantic for High-Fidelity Offshore Wind Energy Modeling

The goal of reaching 30 GW of offshore wind energy by 2030 becomes more realistic with the continued approval of offshore wind energy areas by the Biden Administration. In the Mid-Atlantic, where wind energy projects are in the most advanced stages of development, there is increased research focus on the eventual interaction of these wind farms. These interactions, in the form of wakes and cluster wakes, or wakes from multiple wind farms, could have detrimental effects on power production and forecastability for downwind wind farms (Pryor et al. 2022, Golbazi et al. 2022, Rosencrans et al. 2023). To help alleviate these issues, numerical simulations in the form of numerical weather prediction (NWP) and large eddy simulations (LES) can provide insight into when cluster wake situations may occur, but running such simulations can be expensive and difficult to run for multiple years. In this study, we leverage and build upon existing techniques in the literature (Fischereit et al. 2022) to identify climatologically representative days for wind energy areas in the Mid-Atlantic where conditions would promote cluster wake situations. We select meteorological variables (wind speed, wind direction, atmospheric stability, boundary-layer height, TKE) critical to understanding wind energy production and wake propagation. We then consider two different NWP datasets of varying spatial and temporal resolution: ERA5 provides data at hourly intervals from 1940 to present at 0.25 deg (31 km) spatial resolution (Hersbach et al. 2020), and the NOW-23 dataset provides data at 5-minute resolution for 21 years at 2-km spatial resolution (Bodini et al. 2020). Our first step is to compare these two datasets for an overlapping 21-year time period. Initial results show that the required number of days to represent the long-term climate increases with each additional variable considered. In their study of the German Bight, Fischereit et al. (2022) found that they could represent the long-term wind and wave climate in a "near-perfect" way with -180 days, by reaching a Perkins Skill Score (PSS) of 0.9; our investigation of the mid-Atlantic wind resource region with ERA5 and NOW-23 data suggests that we will need -100 days to reach a PSS of 0.9. As we expand our parameter space to include multiple variables, the number of required days will likely grow. These results will ultimately be used to select case studies to best represent cluster wake conditions that apply to this region for the lifetime of likely wind farms in this mid-Atlantic region.

clusterwakes↗
DOE OSTI2020

PERSIANN Dynamic Infrared–Rain Rate Model (PDIR) for High-Resolution, Real-Time Satellite Precipitation Estimation

Precipitation measurements with high spatiotemporal resolution are a vital input for hydrometeorological and water resources studies; decision-making in disaster management; and weather, climate, and hydrological forecasting. Moreover, real-time precipitation estimation with high precision is pivotal for the monitoring and managing of catastrophic hydroclimate disasters such as flash floods, which frequently transpire after extreme rainfall. While algorithms that exclusively use satellite infrared data as input are attractive owing to their rich spatiotemporal resolution and near-instantaneous availability, their sole reliance on cloud-top brightness temperature (T b ) readings causes underestimates in wet regions and overestimates in dry regions—this is especially evident over the western contiguous United States (CONUS). We introduce an algorithm, the Precipitation Estimations from Remotely Sensed Information Using Artificial Neural Networks (PERSIANN) Dynamic Infrared–Rain rate model (PDIR), which utilizes climatological data to construct a dynamic (i.e., laterally shifting) T b –rain rate relationship that has several notable advantages over other quantitative precipitation-estimation algorithms and noteworthy skill over the western CONUS. Validation of PDIR over the western CONUS shows a promising degree of skill, notably at the annual scale, where it performs well in comparison to other satellite-based products. Analysis of two extreme landfalling atmospheric rivers show that solely IR-based PDIR performs reasonably well compared to other IR- and PMW-based satellite rainfall products, marking its potential to be effective in real-time monitoring of extreme storms. This research suggests that IR-based algorithms that contain the spatiotemporal richness and near-instantaneous availability needed for rapid natural hazards response may soon contain the skill needed for hydrologic and water resource applications.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Development of a Random-Forest Cloud-Regime Classification Model Based on Surface Radiation and Cloud Products

Various methods have been developed to characterize cloud type, otherwise referred to as cloud regime. These include manual sky observations, combining radiative and cloud vertical properties observed from satellite, surface-based remote sensing, and digital processing of sky imagers. While each method has inherent advantages and disadvantages, none of these cloud-typing methods actually includes measurements of surface shortwave or longwave radiative fluxes. Here, a method that relies upon detailed, surface-based radiation and cloud measurements and derived data products to train a random-forest machine-learning cloud classification model is introduced. Measurements from five years of data from the ARM Southern Great Plains site were compiled to train and independently evaluate the model classification performance. A cloud-type accuracy of approximately 80% using the random-forest classifier reveals that the model is well suited to predict climatological cloud properties. Furthermore, an analysis of the cloud-type misclassifications is performed. While physical cloud types may be misreported, the shortwave radiative signatures are similar between misclassified cloud types. From this, we assert that the cloud-regime model has the capacity to successfully differentiate clouds with comparable cloud–radiative interactions. Therefore, we conclude that the model can provide useful cloud-property information for fundamental cloud studies, inform renewable energy studies, and be a tool for numerical model evaluation and parameterization improvement, among many other applications.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Using CESM-RESFire to understand climate–fire–ecosystem interactions and the implications for decadal climate variability

Large wildfires exert strong disturbance on regional and global climate systems and ecosystems by perturbing radiative forcing as well as the carbon and water balance between the atmosphere and land surface, while short- and long-term variations in fire weather, terrestrial ecosystems, and human activity modulate fire intensity and reshape fire regimes. The complex climate–fire–ecosystem interactions were not fully integrated in previous climate model studies, and the resulting effects on the projections of future climate change are not well understood. Here we use the fully interactive REgion-Specific ecosystem feedback Fire model (RESFire) that was developed in the Community Earth System Model (CESM) to investigate these interactions and their impacts on climate systems and fire activity. We designed two sets of decadal simulations using CESM-RESFire for present-day (2001–2010) and future (2051–2060) scenarios, respectively, and conducted a series of sensitivity experiments to assess the effects of individual feedback pathways among climate, fire, and ecosystems. Our implementation of RESFire, which includes online land–atmosphere coupling of fire emissions and fire-induced land cover change (LCC), reproduces the observed aerosol optical depth (AOD) from space-based Moderate Resolution Imaging Spectroradiometer (MODIS) satellite products and ground-based AErosol RObotic NETwork (AERONET) data; it agrees well with carbon budget benchmarks from previous studies. We estimate the global averaged net radiative effect of both fire aerosols and fire-induced LCC at –0.59±0.52 W m –2 , which is dominated by fire aerosol–cloud interactions (–0.82±0.19 W m –2 ), in the present-day scenario under climatological conditions of the 2000s. The fire-related net cooling effect increases by ~170 % to –1.60±0.27 W m –2 in the 2050s under the conditions of the Representative Concentration Pathway 4.5 (RCP4.5) scenario. Such considerably enhanced radiative effect is attributed to the largely increased global burned area (+19 %) and fire carbon emissions (+100 %) from the 2000s to the 2050s driven by climate change. The net ecosystem exchange (NEE) of carbon between the land and atmosphere components in the simulations increases by 33 % accordingly, implying that biomass burning is an increasing carbon source at short-term timescales in the future. High-latitude regions with prevalent peatlands would be more vulnerable to increased fire threats due to climate change, and the increase in fire aerosols could counter the projected decrease in anthropogenic aerosols due to air pollution control policies in many regions. We also evaluate two distinct feedback mechanisms that are associated with fire aerosols and fire-induced LCC, respectively. On a global scale, the first mechanism imposes positive feedbacks to fire activity through enhanced droughts with suppressed precipitation by fire aerosol–cloud interactions, while the second one manifests as negative feedbacks due to reduced fuel loads by fire consumption and post-fire tree mortality and recovery processes. These two feedback pathways with opposite effects compete at regional to global scales and increase the complexity of climate–fire–ecosystem interactions and their climatic impacts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Subtropical Jet in Reanalysis Data from STJ_PV

Subtropical jet position from a new method for locating the subtropical jet, called the tropopause gradient method. It is based on the peak gradient in potential temperature along the dynamic tropopause. This data has the identified subtropical jet latitude, level, and intensity across four different reanalysis products (CFSR-2, ERA-Interim, JRA-55, and MERRA-2), at both daily and monthly output frequency.

58 GEOSCIENCES↗
DOE OSTI2020

Radar-derived precipitation climatology for wind turbine blade leading edge erosion

Wind turbine blade leading edge erosion (LEE) is a potentially significant source of revenue loss for wind farm operators. Thus, it is important to advance understanding of the underlying causes, to generate geospatial estimates of erosion potential to provide guidance in pre-deployment planning, and ultimately to advance methods to mitigate this effect and extend blade lifetimes. This study focuses on the second issue and presents a novel approach to characterizing the erosion potential across the contiguous USA based solely on publicly available data products from the National Weather Service dual-polarization radar. The approach is described in detail and illustrated using six locations distributed across parts of the USA that have substantial wind turbine deployments. Results from these locations demonstrate the high spatial variability in precipitation-induced erosion potential, illustrate the importance of low-probability high-impact events to cumulative annual total kinetic energy transfer and emphasize the importance of hail as a damage vector.

Letson, Frederick (ORCID:0000000192750359)↗
DOE OSTI2024

The High-resolution Urban Meteorology for Impacts Dataset (HUMID) daily for the Conterminous United States

Many current gridded surface meteorological datasets are inadequate for quantifying near surface spatiotemporal variability because they do not fully represent the impacts of land surface heterogeneity. Of note, explicit representation of the spatial structure and magnitude of local urban warming are usually lacking. Here we enhance the representation of spatial meteorological variability over urban areas in the conterminous United States (CONUS) by employing the High-Resolution Land Data Assimilation System (HRLDAS), which accounts for the fine-scale impacts of spatiotemporally varying land surfaces on weather. We also synthesize in situ meteorological data including local mesonets to create a 1 km grid spacing model-observation fusion product spanning 1981-2018 over the CONUS. Daily maximum, minimum, and mean values for a variety of temperature estimates, humidity, and surface energy budget terms, among others, are included. This High-resolution Urban Meteorology for Impacts Dataset (HUMID) will be useful for studies examining spatial variability of near surface meteorology and the impacts of urban heat islands across many disciplines including epidemiology, ecology, and climatology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Site B - NREL ASSIST (SN11) Thermodynamic Retrievals TROPoe / Derived Data

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe v0.12 (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). The profiles are retrieved every 10 minutes from instantaneous observations from the NREL ASSIST-II (SN 11) infrared spectrometer. Observations are noise-filtered but not averaged in time to minimize errors due to non-uniform clouds. Additional input data in TROPoe are cloud base height (CBH), which is a combined data product that uses data from ceilometers at sites A1 and H and scanning lidars from ARM sites C1 and E37. The CBH is weighted inversely proportionally to the distance to the respective site to take into account the spatial variability of clouds (see https://github.com/StefanoWind/ASSIST_analysis/blob/main/awaken_processing/combine_cbh.py). The full pipeline for running the retrieval is available at https://github.com/StefanoWind/TROPoe_processor. Met data was not ingested. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at ARM SGP, OK.

17 WIND ENERGY↗
DOE OSTI2025

Site G - NREL ASSIST (SN10) Thermodynamic Retrievals TROPoe / Derived Data

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe v0.12 (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). The profiles are retrieved every 10 minutes from instantaneous observations from the NREL ASSIST-II (SN 10) infrared spectrometer. Observations are noise-filtered but not averaged in time to minimize errors due to non-uniform clouds. Additional input data in TROPoe are cloud base height (CBH), which is a combined data product that uses data from ceilometers at sites A1 and H and scanning lidars from ARM sites C1 and E37. The CBH is weighted inversely proportionally to the distance to the respective site to take into account the spatial variability of clouds (see https://github.com/StefanoWind/ASSIST_analysis/blob/main/awaken_processing/combine_cbh.py). The full pipeline for running the retrieval is available at https://github.com/StefanoWind/TROPoe_processor. Met data was not ingested. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at ARM SGP, OK.

17 WIND ENERGY↗
DOE OSTI2025

Site C1a - NREL ASSIST (SN12) Thermodynamic Retrievals TROPoe / Derived Data

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe v0.12 (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). The profiles are retrieved every 10 minutes from instantaneous observations from the NREL ASSIST-II (SN 12) infrared spectrometer. Observations are noise-filtered but not averaged in time to minimize errors due to non-uniform clouds. Additional input data in TROPoe are cloud base height (CBH), which is a combined data product that uses data from ceilometers at sites A1 and H and scanning lidars from ARM sites C1 and E37. The CBH is weighted inversely proportionally to the distance to the respective site to take into account the spatial variability of clouds (see https://github.com/StefanoWind/ASSIST_analysis/blob/main/awaken_processing/combine_cbh.py). The full pipeline for running the retrieval is available at https://github.com/StefanoWind/TROPoe_processor. Met data was not ingested. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at ARM SGP, OK.

17 WIND ENERGY↗
DOE OSTI2022

Biomass sorghum production in Iowa, USA

This dataset includes field measurement and model simulation data from Josh Bendorf's (former MS student with Drs. VanLoocke & Heaton, ISU Dept. of Agronomy) thesis project focusing on the simulation of biomass sorghum ( Sorghum bicolor L. Moench) in the state of Iowa. Measured field data are provided in CSV file format for 2019 & 2020. Model output files are provided as NetCDF file format for the state of Iowa (1998-2007) & the larger US region (1969-2018).

Agricultural production systems simulation↗
DOE OSTI2024

Assessing Spatial Representativeness of Global Flux Tower Eddy-Covariance Measurements Using Data from FLUXNET2015

Large datasets of carbon dioxide, energy, and water fluxes were measured with the eddy-covariance (EC) technique, such as FLUXNET2015. These datasets are widely used to validate remote-sensing products and benchmark models. One of the major challenges in utilizing EC-flux data is determining the spatial extent to which measurements taken at individual EC towers reflect model-grid or remote sensing pixels. To minimize the potential biases caused by the footprint-to-target area mismatch, it is important to use flux datasets with awareness of the footprint. This study analyze the spatial representativeness of global EC measurements based on the open-source FLUXNET2015 data, using the published flux footprint model (SAFE-f). The calculated annual cumulative footprint climatology (ACFC) was overlaid on land cover and vegetation index maps to create a spatial representativeness dataset of global flux towers. The dataset includes the following components: (1) the ACFC contour (ACFCC) data and areas representing 50%, 60%, 70%, and 80% ACFCC of each site, (2) the proportion of each land cover type weighted by the 80% ACFC (ACFCW), (3) the semivariogram calculated using Normalized Difference Vegetation Index (NDVI) considering the 80% ACFCW, and (4) the sensor location bias (SLB) between the 80% ACFCW and designated areas (e.g. 80% ACFCC and window sizes) proxied by NDVI. Finally, we conducted a comprehensive evaluation of the representativeness of each site from three aspects: (1) the underlying surface cover, (2) the semivariogram, and (3) the SLB between 80% ACFCW and 80% ACFCC, and categorized them into 3 levels. The goal of creating this dataset is to provide data quality guidance for international researchers to effectively utilize the FLUXNET2015 dataset in the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A New CIERRA Gridded Product Climatology for LIS/OTD

The GLM-CIERRA processing generates two products: A level-2 cluster feature dataset that merges flashes that should have been a single flash following the clustering algorithm flash definition (for GLM, this is due to the LCFA thresholds); A set of level-3 gridded products including Flash Extent Density, Convective Probability, etc. The CIERRA Level-3 products are generated on a 0.1 degree grid. This is suboptimal given the spatial variations in GLM pixel size AND the size of gridpoints in the output grid. As a stepping-stone towards developing improved GLM-CIERRA grids, I am testing pixel matching techniques on the LIS/OTD data. The goal is to maintain accuracy while vastly improving computational efficiency. The CIERRA reclustering codes are also being applied to LIS / OTD to merge flashes split by the “first fit” clustering technique. The end result will be standardized grids at the nominal resolution of each instrument (5 km for LIS, 10 km for OTD) that take into account the pixel geometry for each event that comprises a given reclustered flash.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Unraveling the effects of management and climate on carbon fluxes of U.S. croplands using the USDA Long-Term Agroecosystem (LTAR) network

Understanding the carbon fluxes and dynamics from a broad range of agricultural systems has the potential to improve our ability to increase carbon sequestration while maintaining crop yields. Short-term, single-location studies have limited applicability, but long-term data from a network of many locations can provide a broader understanding across gradients of climate and management choices. Here we examine eddy covariance measured carbon dioxide (CO 2 ) fluxes from cropland sites across the United States Department of Agriculture's Long-Term Agroecosystem Research (LTAR) network. The dataset was collected between 2001 and 2020, spanning 13 sites for a total of 182 site-years. Average seasonal patterns of net ecosystem CO 2 exchange (NEE), gross primary productivity (GPP), and ecosystem respiration (R eco ) were determined, and subsequent regression analysis on these “flux climatologies” was used to identify relationships to mean annual temperature (MAT), mean annual precipitation (MAP), cropping systems, and management practices. At rainfed sites, carbon fluxes were better correlated with MAP (r2 ≤ 0.5) than MAT (r2 ≤ 0.22). Net carbon balance was different among cropping systems (p < 0.001), with the greatest net carbon uptake occurring in sugarcane (Saccharum spp. hybrids) and the least in soybean (Glycine max) fields. Crop type had a greater effect on carbon balance than irrigation management at a Nebraska site. Across cropping systems, grain crops often had higher GPP and were more likely to have net uptake when compared to legume crops. This multi-site analysis highlights the potential of the LTAR network to further carbon flux research using eddy covariance measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Optimal interpolation of global dissolved oxygen: 1965–2015

Oxygen inventory of the global ocean has declined in recent decades potentially due to the warming-induced reduction in solubility as well as the circulation and biogeochemical changes associated with ocean warming and increasing stratification. Earth System Models predict continued oxygen decline for this century with profound impacts on marine ecosystem and fisheries. Observational constraint on the rate of oxygen loss is crucial for assessing the ability of models to accurately simulate these changes. There are only a few observational assessments of the global oceanic oxygen inventory reporting a range of oxygen loss. This study develops a gridded data set of dissolved oxygen for the global oceans using optimal interpolation method. The resulting gridded product includes full-depth map of dissolved oxygen as 5-year moving average from 1965 to 2015 with uncertainty estimates. The uncertainty can come from unresolved small-scale and high-frequency variability and mapping errors. The multi-decadal trend of global dissolved oxygen is in the range of -281 to -373 Tmol/decade. This estimate is more conservative than previous works. In this study, the grid points far from the observations are essentially set equal to zero anomaly from the climatology. Calculating global inventory with this approach produces a relatively conservative estimate; thus, the results from this study likely provide a useful lower bound estimate of the global oxygen loss.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Technical descriptions of the experimental dynamical downscaling simulations over North America by the CAM–MPAS variable-resolution model

Abstract. Comprehensive assessment of climate datasets is important for communicating model projections and associated uncertainties to stakeholders. Uncertainties can arise not only from assumptions and biases within the model but also from external factors such as computational constraint and data processing. To understand sources of uncertainties in global variable-resolution (VR) dynamical downscaling, we produced a regional climate dataset using the Model for Prediction Across Scales (MPAS; dynamical core version 4.0) coupled to the Community Atmosphere Model (CAM; version 5.4), which we refer to as CAM–MPAS hereafter. This document provides technical details of the model configuration, simulations, computational requirements, post-processing, and data archive of the experimental CAM–MPAS downscaling data. The CAM–MPAS model is configured with VR meshes featuring higher resolutions over North America as well as quasi-uniform-resolution meshes across the globe. The dataset includes multiple uniform- (240 and 120 km) and variable-resolution (50–200, 25–100, and 12–46 km) simulations for both the present-day (1990–2010) and future (2080–2100) periods, closely following the protocol of the North American Coordinated Regional Climate Downscaling Experiment. A deviation from the protocol is the pseudo-warming experiment for the future period, using the ocean boundary conditions produced by adding the sea surface temperature and sea-ice changes from the low-resolution version of the Max Planck Institute Earth System Model (MPI-ESM-LR) in the Coupled Model Intercomparison Project Phase 5 to the present-day ocean state from a reanalysis product. Some unique aspects of global VR models are evaluated to provide background knowledge to data users and to explore good practices for modelers who use VR models for regional downscaling. In the coarse-resolution domain, strong resolution sensitivity of the hydrological cycles exists over the tropics but does not appear to affect the midlatitude circulations in the Northern Hemisphere, including the downscaling target of North America. The pseudo-warming experiment leads to similar responses of large-scale circulations to the imposed radiative and boundary forcings in the CAM–MPAS and MPI-ESM-LR models, but their climatological states in the historical period differ over various regions, including North America. Such differences are carried to the future period, suggesting the importance of the base state climatology. Within the refined domain, precipitation statistics improve with higher resolutions, and such statistical inference is verified to be negligibly influenced by horizontal remapping during post-processing. Limited (≈50 % slower) throughput of the current code is found on a recent many-core/wide-vector high-performance computing system, which limits the lengths of the 12–46 km simulations and indirectly affects sampling uncertainty. Our experience shows that global and technical aspects of the VR downscaling framework require further investigations to reduce uncertainties for regional climate projection.

58 GEOSCIENCES↗