Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Significant Features Found in Simulated Tropical Climates Using a Cloud Resolving Model

Cloud resolving model (CRM) has widely been used in recent years for simulations involving studies of radiative-convective systems and their role in determining the tropical regional climate. The growing popularity of CRMs usage can be credited for their inclusion of crucial and realistic features such like explicit cloud-scale dynamics, sophisticated microphysical processes, and explicit radiative-convective interaction. For example, by using a two-dimensional cloud model with radiative-convective interaction process, found a QBO-like (quasibiennial oscillation) oscillation of mean zonal wind that affected the convective system. Accordingly, the model-generated rain band corresponding to convective activity propagated in the direction of the low-level zonal mean winds; however, the precipitation became "localized" (limited within a small portion of the domain) as zonal mean winds were removed. Two other CRM simulations by S94 and Grabowski et al. (1996, hereafter G96), respectively that produced distinctive quasi-equilibrium ("climate") states on both tropical water and energy, i.e., a cold/dry state in S94 and a warm/wet state in G96, have later been investigated by T99. They found that the pattern of the imposed large-scale horizontal wind and the magnitude of the imposed surface fluxes were the two crucial mechanisms in determining the tropical climate states. The warm/wet climate was found associated with prescribed strong surface winds, or with maintained strong vertical wind shears that well-organized convective systems prevailed. On the other hand, the cold/dry climate was produced due to imposed weak surface winds and weak wind shears throughout a vertically mixing process by convection. In this study, considered as a sequel of T99, the model simulations to be presented are generally similar to those of T99 (where a detailed model setup can be found), except for a more detailed discussion along with few more simulated experiments. There are twelve major experiments chosen for presentations that are introduced in section two. Several significant feature analyses regarding the rainfall properties, CAPE (Convective Available Potential Energy), cloud-scale eddies, the stability issue, the convective system propagation, relative humidity, and the effect on the quasi-equilibrium state by the imposed constant. radiation or constant surface fluxes, and etc. will be presented in the meeting. However, only three of the subjects are discussed in section three. A brief summary is concluded in the end section.

Shie, C.-L.↗
NASA NTRS1988

Satellite remote sensing and cloud modeling of St. Anthony, Minnesota storm clouds and dew point depression

Rawinsonde data and geosynchronous satellite imagery were used to investigate the life cycles of St. Anthony, Minnesota's severe convective storms. It is found that the fully developed storm clouds, with overshooting cloud tops penetrating above the tropopause, collapsed about three minutes before the touchdown of the tornadoes. Results indicate that the probability of producing an outbreak of tornadoes causing greater damage increases when there are higher values of potential energy storage per unit area for overshooting cloud tops penetrating the tropopause. It is also found that there is less chance for clouds with a lower moisture content to be outgrown as a storm cloud than clouds with a higher moisture content.

Hung, R. J.↗
NASA NTRS2018

Modeling Clouds in Brown Dwarf and Exoplanet Giant Planet Atmospheres

Clouds and hazes are commonplace in the atmospheres of solar system planets and are likely ubiquitous in the atmospheres of extrasolar planets as well. Clouds affect every aspect of a planetary atmosphere, from the transport of radiation, to atmospheric chemistry, to dynamics and they influence - if not control - aspects such as surface temperature and habitability. In my presentations I aim to provide an introduction to the role and properties of clouds in exoplanetary atmospheres and will discuss the lessons learned from the past two decades of studying clouds in brown dwarf atmospheres. I will consider the role clouds play in influencing the spectra of extrasolar giant planets and will discuss the relative simple approaches that have been taken so far to model exoplanet clouds. I will also review how the scattering and extinction efficiencies of cloud particles may be approximated in certain limiting cases of small and large particles in order to facilitate physical understanding and will discuss the need for optimized cloud models that can be applied to exoplanet transmission spectra. Finally I will discuss the various sources of aerosol opacity, including photochemistry, disequilibrium chemistry, and equilibrium condensation.

Marley, Mark S.↗
NASA NTRS1989

Cumulus cloud model estimates of trace gas transports

Draft structures in convective clouds are examined with reference to the results of the NASA Amazon Boundary Layer Experiments (ABLE IIa and IIb) and calculations based on a multidimensional time dependent dynamic and microphysical numerical cloud model. It is shown that some aspects of the draft structures can be calculated from measurements of the cloud environment. Estimated residence times in the lower regions of the cloud based on surface observations (divergence and vertical velocities) are within the same order of magnitude (about 20 min) as model trajectory estimates.

Garstang, Michael↗
NASA NTRS1988

Simulations using a 3D-moment turbulence closure in a two-dimensional cloud model - Comparisons with observations

A method for deep cumulus cloud simulations is presented, in which the plumes or clouds are simulated using a two-dimensional axisymmetric numerical cloud model with third-moment turbulence closure. This method is based on the assumption that the only uncertainty in the turbulence closure is in the turbulent length scale specification. Therefore, the length scale is varied, and, using different length scales, the simulated plumes are compared to the observed ones, making it possible to optimize the length scale prescription.

Krueger, Steven K.↗
NASA NTRS2003

Cloud Modeling Using Field Project Data for the Study of Precipitation Processes

The use of cloud-resolving models (CRMs) in the study of precipitation process and their relation to the large-scale environment can be generally categorized into two approaches. The first approach is so called "cloud ensemble modeling". In this approach, many clouds of different size in various stages of their lifecycles can be present at any model simulation time. Large-scale effects are derived from observations and imposed into the model as the main forcing. The advantage of this approach is that the modeled convection will be forced to have the same intensity, thermodynamic budget and organization as the obserations.This approach will also allow CRMs to perform multi-day or multi-week time integrations. The second approach usually requires initial temperature and water vapor profiles that have a medium to large CAPE, and open lateral boundary conditions are used. The modeled clouds could be termed "self-forced convection". Model improvements, such as in the microphysics, are achieved using the second approach. In cloud ensemble modeling, accurate large-scale advective tendencies for temperature and water vapor are the main forcing for the CRMs. We found that the large-scale advective terms for temperature and water vapor are not always consistent, For example, large-scale forcing could indicate strong drying which would produce cooling in the model through evaporation but not contain large-scale advective heating to compensate. This discrepancy in forcing would cause differences between the observed and modeled latent heating profiles. Good measurements of other quantities (i.e., surface fluxes and radiation) are also required to perform variational objective analysis that computes and minimizes a "cost function" that constrains the difference between the large-scale advective forcing in temperature and water vapor. With self-forced convection, accurate vertical distributions of temperature, moisture (water vapor), and horizontal winds are required. The timing of the measurements relative to cloud development is crucial (i.e., prior to cloud triggering). Microphysical measurements (i.e., the cloud number concentration and size distribution) can also be used in this second approach but are of secondary importance with cloud ensemble modeling. In this paper, data collected during TRMM field campaigns (FCs; i.e., SCSMEX, LBA and KWAJEX) which were aimed at validating TRMM products (i.e., rainfall and the vertical distribution of latent heating) will be used to examine the impact of errors in the initial conditions (e.g.., soundings an large-scale forcing) on simulated rainfall distributions and brightness. Rainfall and precipitations simulated from a CRM will also be compared with those estimated by a schocastic model.

Tao, W.-K.↗
NASA NTRS1973

Development of a global cloud model for simulating earth-viewing space missions.

Existing global cloud models are improved and expanded so that they might be more effectively used in planning and evaluating potential earth-viewing space missions. A relationship is developed between the ground and satellite-derived cloud-amount frequency distributions. This relationship is used to improve internal consistency between the ground-observed unconditional statistics and the satellite-derived conditional statistics as tabulated in previous models. A statistical technique is developed which permits the scaling of the conditional statistics to time and distance separations other than those for which the data base is tabulated. A new technique to increase or decrease the representative area size of the statistical data base is developed. Both the scaling and area adjustment techniques are shown to represent significant improvements over the techniques previously employed.

Greaves, J. R.↗
NASA NTRS1980

Collapsing cloud models for Bok globules

The dynamic collapse of rotating gas clouds is calculated for a wide range of initial conditions. Properties of cloud models are compared with observed radio and optical properties of Bok globules, to test the hypothesis that globules undergo collapse and to determine parameters which are not easily observed. Five of the six globules studied are consistent with collapse models. It is inferred that these objects have masses of about 100 solar masses and ages smaller than their free-fall times. Inferred initial densities are much larger than minimum densities for gravitational collapse, suggesting that collapse is initiated by strong external compression or that globules are fragments of larger condensed clouds. Values inferred for the (C-13)O/H2 ratio are smaller than previous estimates and depend strongly on cloud density.

Villere, K. R.↗
NASA NTRS1994

Parameterization of bulk condensation in numerical cloud models

The accuracy of the moist saturation adjustment scheme has been evaluated using a three-dimensional explicit microphysical cloud model. It was found that the error in saturation adjustment depends strongly on the Cloud Condensation Nucleii (CCN) concentration in the ambient atmosphere. The scheme provides rather accurate results in the case where a sufficiently large number of CCN (on the order of several hundred per cubic centimeter) is available. However, under conditions typical of marine stratocumulus cloud layers with low CCN concentration, the error in the amounts of condensed water vapor and released latent heat may be as large as 40%-50%. A revision of the saturation adjustment scheme is devised that employs the CCN concentration, dynamical supersaturation, and cloud water content as additional variables in the calculation of the condensation rate. The revised condensation model reduced the error in maximum updraft and cloud water content in the climatically significant case of marine stratocumulus cloud layers by an order of magnitude.

Kogan, Yefim L.↗
NASA NTRSDate not supplied

Boundary-Layer Cloud Modeling Challenges on the North Slope of Alaska

The accurate modeling and prediction of cloud base heights is critical for energy balance calculations and aviation operations, alike. Low-level (i.e., boundary-layer) Arctic clouds can be difficult to model, making prediction of formation and dissipation challenging. Primarily mixed-phase, these clouds typically contain low quantities of supercooled liquid water and often slowly precipitate relatively small amounts of moderately and heavily rimed snow particles. While this appears to be the predominant cloudy state on the North Slope of Alaska (NSA), the delicate balance of microphysical, dynamical, radiative, surface coupling, and advective processes can rapidly shift to heavy snow (with various degrees of riming) or to a complete dissipation of the cloud layer without any precipitation, depending on the dominant processes. Here we strive to disentangle these various processes. First, we compare the predictive performances of four different numerical weather models in forecasting the presence and base-heights of low-level clouds: the High-Resolution Rapid Refresh - Alaska (HRRR-AK) model, the Polar Weather Research and Forecasting (Polar WRF) model, the Unified Model (UM), and the European Centre for Medium-range Weather Forecasting (ECMWF) model. Initial results comparing model output at two U.S. Department of Energy Atmospheric Radiation Measurement (AMT) NSA sites, during the fall season in 2019 and 2022, show that the UM slightly outperforms the HRRR-AK in terms of accurately forecasting the presence of a low-level cloud layer (89% of the time). All models have a significant bias of 300 to 800 meters in forecasting cloud base height (lower than is observed); however, the UM and ECMWF models have the lowest biases. Finally, a case study for a particularly challenging April 2017 thin-cloud event is presented, wherein we compare the performance of four different bulk microphysical parameterization schemes using a higher-resolution large eddy simulation (LES) model, the WRF-LES. Initial results show that the Thompson scheme was the only one able to reproduce and sustain a substantial supercooled liquid layer, but it was unable to reproduce the transition from a deep, liquid-rich cloud to a thin layer with moderately and heavily rimed precipitation. This is the first step in linking simulated LES-scale riming processes with those parameterized at a coarser mesoscale model scale. This has important implications for forecasting low-level clouds in an operational environment, given the efficiency of the riming process.

cloud base heights↗
NASA NTRS1988

Satellite microwave rainfall simulations with a three-dimensional dynamical cloud model

The three-dimensional, multicloud model of Tao and Soong (1986) is used to generate three-dimensional distribution of pertinent microphysical and state parameters which are used as input into a microwave radiative transfer model. The model is used to calculate upwelling radiance (brightness temperature) at microwave frequencies from 10 to 183 GHz with an ocean background. The model is used to study the relationship between simulated upwell brightness temperature and the cloud-model-generated rain rate at the surface. It is suggested that these calculations can be used to simulate satellite observed brightness temperature values and to make area-averaged rain rates.

Adler, Robert F.↗
NASA NTRS2005

Dynamical Zodiacal Cloud Models Constrained by High Resolution Spectroscopy of the Zodiacal Light

We have developed a set of self-consistent dynamical models of the Zodiacal cloud, following the orbital evolution of dust particles. Three populations were considered, originating from the Kuiper belt, asteroids and comets. Using the models developed, we investigated how the solar spectrum is changed by scattering by the zodiacal cloud grains and compared the obtained spectra with the observations.

Ipatov, S. I.↗
NASA NTRS1986

Vortex cloud model for body vortex shedding and tracking

The discrete vortex cloud approach models a missile airframe's vortex wake by means that are capable of treating a variety of configurations over a range of flow conditions. Attention is given to the sheets of vorticity formed on the lee side of a missile at moderate angles-of-attack. While three-dimensional attached flow models are used to represent the missile body, two-dimensional, incompressible, separated flow models are used to represent the separated vortex wake. The predicted pressure distribution of the body under the influence of the freestream and the separation vortex wake are used to calculate aerodynamic loads on the body. The separation vortex wake is represented by clouds of discrete vortices in cross flow planes normal to the body axis.

Mendenhall, Michael R.↗
NASA NTRS1989

Observational constraints on an embedded cloud model for the soft X-ray diffuse background

The reason for the observed anticorrelation between soft X-ray diffuse background (SXRB) and neutral hydrogen column densities are considered. Using the B and C band data from an all-sky survey of the SXRB, as well as data in the Be band, it is shown that the Jakobsen and Kahn (1986) embedded cloud model, in which several statistical properties of the SXRB in the B and C bands were used to constrain their model parameters, cannot fit the observed band ratios, except in the limit in which virtually all of the emission originates in the near side of the absorbing gas. It was also shown that model parameters corresponding to appreciably mixed emission and absorption, as proposed by Bunner et al. (1969) and Davidsen et al. (1972), do not fit the data. Model parameters corresponding to the absorption models of Bowyer et al. (1968), Bunner et al. (1969), Davidsen et al. (1972), and Yentis et al. (1972), cannot fit the data unless the absorbing material is more strongly clumped than is permitted by 21-cm observations.

Burrows, D. N.↗
NASA NTRS1990

The effect of convective life cycle stage on microwave brightness temperature/rainrate relations as determined from 3-D cloud model results

The relationship between the rain rate and the brightness temperature (Tb) was investigated using a cloud model/microwave radiative transfer model combination to obtain the rain-rate/Tb relations for four different frequencies: 10, 19, 37, and 86 GHz. The results at 19, 37, and 86 GHz were found to be significantly affected by ice in the modeled convective system, while the results at 10 GHz showed very little effect. Nonprecipitating cloud water was found to affect Tb in two ways. First, at low rain rates, the presence of significant cloud water produced higher Tb values than in cases with little cloud water. The second effects occurs at 19, 37, and 86 GHz at higher rainrates associated with significant ice formation; the scattering by ice lowered the Tb.

Adler, Robert F.↗
NASA NTRS2005

Comparison of Histograms for Use in Cloud Observation and Modeling

Cloud observation and cloud modeling data can be presented in histograms for each characteristic to be measured. Combining information from single-cloud histograms yields a summary histogram. Summary histograms can be compared to each other to reach conclusions about the behavior of an ensemble of clouds in different places at different times or about the accuracy of a particular cloud model. As in any scientific comparison, it is necessary to decide whether any apparent differences are statistically significant. The usual methods of deciding statistical significance when comparing histograms do not apply in this case because they assume independent data. Thus, a new method is necessary. The proposed method uses the Euclidean distance metric and bootstrapping to calculate the significance level.

Green, Lisa↗