Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud thickness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

CERES MODIS Cloud Product Retrievals for Edition 4--Part I: Algorithm Changes

The Edition 2 (Ed2) cloud property retrieval algorithm system was upgraded and applied to the MODerate-resolution Imaging Spectroradiometer (MODIS) data for the Clouds and the Earth's Radiant Energy System (CERES) Edition 4 (Ed4) products. New calibrations for solar channels and the use of the 1.24-μm channel for cloud optical depth (COD) over snow improve the daytime consistency between Terra and Aqua MODIS retrievals. Use of additional spectral channels and revised logic enhanced the cloud-top phase retrieval accuracy. A new ice crystal reflectance model and a CO₂-channel algorithm retrieved higher ice clouds, while a new regional lapse rate technique produced more accurate water cloud heights than in Ed2. Ice cloud base heights are more accurate due to a new cloud thickness parameterization. Overall, CODs increased, especially over the polar (PO) regions. The mean particle sizes increased slightly for water clouds, but more so for ice clouds in the PO areas. New experimental parameters introduced in Ed4 are limited in utility, but will be revised for the next CERES edition. As part of the Ed4 retrieval evaluation, the average properties are compared with those from other algorithms and the differences between individual reference data and matched Ed4 retrievals are explored. Part II of this article provides a comprehensive, objective evaluation of selected parameters. More accurate interpretation of the CERES radiation measurements has resulted from the use of the Ed4 cloud properties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Exploring Sources of Surface Bias in HRRR Using New York State Mesonet

In recent years, there has been increasing demand for applications of short-term forecasting of renewable energy potential and assessments of the likelihood of extreme weather events using the High-Resolution Rapid Refresh (HRRR) model. Examining the biases in the newest version of HRRR is necessary to promote further model development. Using data from one of the most comprehensive and dense monitoring networks, New York State Mesonet (NYSM), we evaluate the HRRR version 3 meteorological fields for an entire year. In this work, the land-atmosphere-cloud coupling system is evaluated as an integrated whole. We investigate the physical processes influencing the soil hydrological balance and the thermodynamic interactions, from surface fluxes up to the level of boundary layer convection from both temporal (seasonal and diurnal) and spatial perspectives. Results show that the model 2 m temperature and humidity biases are seasonally dependent, with warm and dry bias present during the warm season, and an extreme nocturnal cold bias in winter. The summer warm bias includes both a land-surface-induced bias and a cloud-induced bias. Inaccurate representation of energy partition and soil hydrological process across different land use types as well as a hydrological bias in describing spring snowmelt are identified as the main source of the land-surface-induced bias. A feedback loop linking cloud presence, flux changes, and temperature contributes to the cloud-induced bias. The positive solar radiation bias increases from clear sky to overcast sky conditions. The most significant bias occurs during overcast and thick cloud conditions associated with frontal passage and thunderstorms.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Relationships among diurnal variations of polar night cloud, precipitation, surface temperatures, and the fair-weather return current of the global electric circuit (GEC)

Over the past five years (June 2017-current), the vertical electric field (E z ) as well as numerous cloud, precipitation and radiation properties have been monitored at the Department of Energy-Atmospheric Radiation Measurement (DOE ARM) North Slope of Alaska (NSA) field site. Comparisons between the composite diurnal averaged fair-weather E z , and composite ceilometer derived cloud base height during the polar night, reveal a significant correlation between the parameters (r = 0.62), supporting previous studies that there is high correlation between local electric field and cloud properties. With the use of extensive instrumentation at the site, such as the Micro Pulse Lidar (MPL), Ka-band Zenith Radar (KAZR), ceilometer, SKYRAD, Precipitation Imaging Package (PIP), among others, this study provides a more comprehensive examination of the diurnal cycle of cloud and precipitation properties along with the localized fair-weather return current of the larger Global Electric Circuit (GEC) system. Comparisons between the composite diurnal averaged fair-weather E z , and cloud thickness, maximum column backscatter, and precipitation particle counts all show similar diurnal variability during the polar night, indicating that during the largest magnitude fair weather E z time periods, clouds bases tend to be higher, clouds are thicker, have a larger column backscatter, and display more precipitating particles. Furthermore, a slight diurnal variability in the polar night surface temperature was found to be highly correlated (r = 0.87) to the longwave downwelling irradiance measured by SKYRAD, indicating that the variations in the physical properties of local clouds could modulate the diurnal polar night surface temperature variability on the order of 0.5 °C/day. In conclusion, these findings emphasize the importance and global nature of the GEC system, with the global aggregate of thunderstorms and electrified clouds potentially influencing polar night cloud properties as well as diurnal wintertime polar surface temperature variation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Understanding the causes of satellite–model discrepancies in aerosol–cloud interactions using near-LES simulations of marine boundary layer clouds

Aerosol–cloud interactions (ACI) remain the largest source of uncertainty in model estimates of anthropogenic radiative forcing, primarily because of deficiencies in representing aerosol–cloud microphysical processes that lead to inconsistent cloud liquid water path (LWP) responses to aerosol perturbations between observations and models. To investigate this discrepancy, we conducted a series of large-eddy-scale simulations driven by realistic meteorology over the eastern North Atlantic, and evaluated LWP susceptibility, precipitation processes, and boundary layer thermodynamics using satellite and ground-based observations. Simulated LWP responses show a strong dependence on cloud state. Non-precipitating thin clouds exhibit a modest LWP decrease with increasing cloud droplet number concentration (N d ), consistent in sign but weaker in magnitude than satellite estimates, reflecting enhanced turbulent mixing and evaporation. The largest model-observation discrepancy occurs in non-precipitating thick clouds, where simulated LWP susceptibilities are strongly positive (+0.32) while observations indicate large negative values (−0.69). This discrepancy stems from excessive precipitation driven by underestimated entrainment, overly active accretion, and overly broad drop-size distributions in polluted conditions. While our high-resolution setup mitigates the excessive drizzling common in coarser models and captures key regime transitions, these biases persist – highlighting that improved parameterizations of cloud-top processes, precipitation, and aerosol effects are needed beyond simply increasing model resolution. Additionally, misrepresented moisture inversions in reanalysis introduce a moist bias in cloud-top relative humidity, further amplifying positive LWP susceptibility. Our results also suggest that large negative N d –LWP relationships in observations may reflect internal cloud processes rather than true ACI effects.

Aerosol-cloud interaction↗
DOE OSTI2020

Spectral solar irradiance on inclined surfaces: A fast Monte Carlo approach

Estimating spectral plane-of-array (POA) solar irradiance on inclined surfaces is an important step in the design and performance evaluation of both photovoltaic and concentrated solar plants. This work introduces a fast, line-by-line spectral, Monte Carlo (MC) radiative transfer model approach to simulate anisotropic distributions of shortwave radiation through the atmosphere as photon bundles impinge on inclined surfaces. This fast Monte Carlo approach reproduces the angular distribution of solar irradiance without the undesirable effects of spatial discretization and thus computes detailed POA irradiance values on surfaces at any orientation and also when surfaces are subjected to the anisotropic ground and atmospheric scattering. Polarization effects are also easily incorporated into this approach that can be considered as direct numerical simulation of the physics involved. Here, we compare our Monte Carlo radiative transfer model with the most widely used empirical transposition model, Perez4, under various conditions. The results show that the Perez4 model reproduces the more detailed Monte Carlo simulations with less than 10% deviation under clear skies for all relevant surface tilt and azimuth angles. When optically thin clouds are present, observed deviations are larger, especially when the receiving surface is strongly tilted. Deviations are also observed for large azimuth angle differences between the receiving surface and the solar position. When optically thick clouds are present, the two models agree within 15% deviation for nearly all surface orientation and tilt angles. The overall deviations are smaller when compared with cases for optically thin clouds. The Perez4 model performs very well (6.0% deviation) in comparison with the detailed MC simulations for all cases, thus validating its widespread use for practical solar applications. When detailed atmospheric profiles and cloud optical properties are available, the proposed fast Monte Carlo radiative model reproduces accurate spectral and angular POA irradiance levels for various atmospheric and cloud cover conditions, surface orientations, and different surface and ground properties.

42 ENGINEERING↗
DOE OSTI2022

Evaluating WRF-Solar EPS cloud mask forecast using the NSRDB

Improving the accuracy of day-ahead solar forecasts using numerical weather prediction models requires improving the forecasting of cloud occurrence and properties. Validating cloud forecasts is challenging because this requires evaluating different types of clouds over a wide variety of regions. This study analyzes the cloud occurrence (or cloud mask) over the contiguous United States (CONUS), predicted by the Weather Research and Forecasting-Solar Ensemble Prediction System (WRF-Solar EPS), to identify the strengths and limitations of the model in reproducing cloud fields. To enable the in-depth analysis of cloud mask forecasts covering CONUS, we use satellite observations from the National Solar Radiation Database (NSRDB). Two evaluation methods are implemented to consider all clouds and partially removed clouds from the 2-km NSRDB in evaluating the 9-km WRF-Solar EPS cloud mask. Cloud detection metrics as well as the frequency of cloud occurrence are used to quantify the monthly performance of WRF-Solar EPS. Mismatched cloud frequency (MCF) is used to assess the model's capability to predict different types of clouds, which are classified using three levels of cloud optical depth (COD) and cloud top height (CTH). The day-ahead forecasts covering the full year of 2018 demonstrate that WRF-Solar EPS produces MCFs ranging from 27%-46%, 13%-34%, and 8%-19% for thin, mid-thickness, and thick clouds, respectively. For three CTH levels, the model shows MCFs ranging from 19%-46%, 16%-33%, and 8%-27% for low-level, middle-level, and high-level clouds, respectively. This comprehensive characterization of model performance helps identify model weakness and will eventually lead to improvements in cloud and solar radiation forecasting.

14 SOLAR ENERGY↗
DOE OSTI2020

Cloud Atlas: Unraveling the Vertical Cloud Structure with the Time-series Spectrophotometry of an Unusually Red Brown Dwarf

Rotational modulations of emission spectra in brown dwarf and exoplanet atmospheres show that clouds are often distributed non-uniformly in these ultracool atmospheres. The spatial heterogeneity in cloud distribution demonstrates the impact of atmospheric dynamics on cloud formation and evolution. In this study, we update the Hubble Space Telescope (HST) time-series data analysis of the previously reported rotational modulations of WISEP J004701+680352—an unusually red late-L brown dwarf with a spectrum similar to that of the directly imaged planet HR 8799e. We construct a self-consistent spatially heterogeneous cloud model to explain the HST and the Spitzer time-series observations, as well as the time-averaged spectra of WISE 0047. Additionally, in the heterogeneous cloud model, a cloud thickness variation of around one pressure scale height explains the wavelength dependence in the HST near-IR spectral variability. By including disequilibrium CO/CH 4 chemistry, our models also reproduce the redder $J-{K}_{{\rm{s}}}$ color of WISE 0047 compared to that of field brown dwarfs. We discuss the impact of vertical cloud structure on atmospheric profile and estimate the minimum eddy diffusivity coefficient for other objects with redder colors. Our data analysis and forward modeling results demonstrate that time-series spectrophotometry with a broad wavelength coverage is a powerful tool for constraining heterogeneous atmospheric structure.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

AWARE: The Atmospheric Radiation Measurement (ARM) West Antarctic Radiation Experiment

The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) West Antarctic Radiation Experiment (AWARE) performed comprehensive meteorological and aerosol measurements and ground-based atmospheric remote sensing at two Antarctic stations using the most advanced instrumentation available. A suite of cloud research radars, lidars, spectral and broadband radiometers, aerosol chemical and microphysical sampling equipment, and meteorological instrumentation was deployed at McMurdo Station on Ross Island from December 2015 through December 2016. A smaller suite of radiometers and meteorological equipment, including radiosondes optimized for surface energy budget measurement, was deployed on the West Antarctic Ice Sheet between 4 December 2015 and 17 January 2016. AWARE provided Antarctic atmospheric data comparable to several well-instrumented high Arctic sites that have operated for many years and that reveal numerous contrasts with the Arctic in aerosol and cloud microphysical properties. These include persistent differences in liquid cloud occurrence, cloud height, and cloud thickness. Antarctic aerosol properties are also quite different from the Arctic in both seasonal cycle and composition, due to the continent’s isolation from lower latitudes by Southern Ocean storm tracks. Antarctic aerosol number and mass concentrations are not only non-negligible but perhaps play a more important role than previously recognized because of the higher sensitivities of clouds at the very low concentrations caused by the large-scale dynamical isolation. Antarctic aerosol chemical composition, particularly organic components, has implications for local cloud microphysics. The AWARE dataset, fully available online in the ARM Program data archive, offers numerous case studies for unique and rigorous evaluation of mixed-phase cloud parameterization in climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

SCOPE: Spectral cloud optical property estimation using real-time GOES-R longwave imagery

The output of ground-based, solar power generation systems is strongly dependent on cloud cover, which is the main contributor to solar power variability and uncertainty. Cloud optical properties are typically over-simplified in forecasting applications due to the lack of realtime, accurate estimates. In this work, we introduce a method, the Spectral Cloud Optical Property Estimation (SCOPE), for estimating cloud optical properties directly from high-resolution (5-min, 2 km) imagery from Geostationary Operational Environmental Satellite (GOES)-R, which is the newest generation of the GOES system. The SCOPE method couples a two-stream, spectrally resolved radiative model with the longwave GOES-R sensor output to simultaneously estimate the cloud optical depth, cloud top height, and cloud thickness during both day and night at 5-min intervals. The accuracy of SCOPE is evaluated using one year (2018) of downwelling longwave (DLW) radiation measurements from the Surface Radiation Budget Network, which consists of seven sites spread across climatically diverse regions of the contiguous United States. During daytime clear-sky periods, SCOPE predicts DLW within instrument uncertainty (10 W m -2 ) for four of the seven locations, with the remaining locations yielding errors of the order of 11.2, 17.7, and 20.2 W m -2 . For daytime cloudy-sky, daytime all-sky (clear or cloudy), and nighttime all-sky periods, SCOPE achieves root mean square error values of 23.0–34.5 W m -2 for all seven locations. These results, together with the low-latency of the method (1 s per sample), show that SCOPE provides a viable solution to real-time, accurate estimation of cloud optical properties for both day and night.

42 ENGINEERING↗
DOE OSTI2022

Investigation on cloud vertical structures based on Ka-band cloud radar observations at Wuhan in Central China

Based on vertically pointing observations of Ka-band frequency-modulated continuous millimeter wave cloud radar (MMCR) in 2020, we investigate cloud vertical structures at Wuhan in central China. Case comparison indicates that the cloud top locations in the MMCR observation are largely consistent with those in satellite data. The precipitation has the occurrence frequency of 9.5% over the year, with the maximum value of 16.3% in July and the submaximal value of 14.7% in January, showing the significant influences of monsoons on precipitation at Wuhan. As the humid, cloudy and rainy climate, the probability of precipitation and non-precipitation clouds increases gradually from 53.9% in January to a large value of 71.5% in July. The non-precipitation clouds have the probability of 44.5% in the year, with two prominent peaks at the reflectivities of -35 to -30 dBZ around 12 km in summer and - 37– -32 dBZ around 10 km in spring. The cloud top can reach the heights of 14.49, 16.62, 13.38 and 11.73 km from spring to winter, respectively. The monthly mean cloud layer thickness is the largest (2.18 km) in May and September, and the smallest (1.36 km) in November. The seasonally averaged base and top heights and thickness of clouds have small diurnal variations. The high cloud is predominant in the warm months from May to September, and in the other cool months, the middle cloud has the most fraction. The quantitative investigation of clouds is helpful in improving the cloud parameterization in climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Revisiting the Detection of Optical Lightning Superbolts

This study uses Fast On-Orbit Detection of Transient Events (FORTE) satellite observations to identify superbolt-class optical lightning events and evaluate their origins. Superbolts have been defined by Turman as lightning pulses whose peak optical power exceeds 1011 W. However, it has been unclear whether superbolts resulted from particular types of high-energy lightning process or whether they were the result of measurement bias. In the latter case, any decently bright lightning process could be recorded as a superbolt if the sensor had a particularly clear sight line to the hot channel without thick clouds diluting the optical signals. Here, our 12-year analysis of FORTE superbolt detections indicates that the lower optical superbolt energy range (~100 GW) is dominated by normal lightning, but brighter cases are predominantly strong +CG strokes that originate from specific types of storms. Oceanic storm systems, particularly during the winter, and especially those located around Japan are shown to produce these intense superbolts. We suggest that some optical superbolts result from favorable viewing conditions and would not be identified as such by another instrument located elsewhere and that others are associated with a unique set of physics that may merit the “superbolt” distinction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Afterpulse correction for micro-pulse lidar to improve middle and upper tropospheric aerosol measurements

Micro-pulse lidar (MPL) measurements have been widely used in atmospheric research over the past few decades. However, the MPL afterpulse noise has a large impact on the MPL aerosol measurement in the middle and upper troposphere, and an effective correction method is still lacking. Here, a new afterpulse correction approach is presented by using measurements with low-level optically thick clouds to act as the lids blocking atmospheric signals beyond the clouds completely. Examples are provided to illustrate the effectiveness of this correction method. Using one-year 2014 MPL measurements at the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) North Slope of Alaska (NSA) site, the impact of the correction on the aerosol measurements is quantified. The relative error (RE, %) of attenuated backscattering ratio (ABR) without the afterpulse correction is 30% and 190% at the height of 1.00 km and 9.00 km (AGL), and the RE is larger for weaker aerosol signals (ABR<2). The RE of linear depolarization ratio (LDR), which is significantly higher than that of ABR for a given aerosol layer, is highly non-linear above 3.00 km, with a value of 300%-900% for weak aerosols (ABR<2) above 3.00 km. Therefore, the afterpulse correction is critical for the middle and upper tropospheric aerosol observations. We demonstrated that our afterpulse correction can provide reasonable particle depolarization ratio (PDR) to properly identify dust aerosols. The newly developed method can be applied to long-term MPL measurements to support aerosol and mixed-phase/ice cloud interaction study at the NSA site.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

ARM shortwave spectrometers to study the clear-cloud transition zone and mixing processes

The proposed research is a collaborative effort between NASA/Goddard Space Flight Center and the Hebrew University of Jerusalem. While the NASA team focused on analyzing ground-based hyper-spectral radiance observations to understand cloud edge properties and their connection to mixing processes, the Hebrew University team tackled the problem through cloud modeling activities. By approximating the shortwave spectra in the cloud-clear transition zone as a linear combination of purely clear and purely cloudy spectra we can characterize the variations of cloud optical thickness and cloud droplet effective radius in the transition zone. When applying this method to the measurements of a ground-based shortwave spectroradiometer at the ARM’s SGP site, representing continental conditions, and MAGIC field campaign between Log Angeles, California and Honolulu, Hawaii, representing maritime scenarios, we found that cloud optical depth consistently decreases in both cases, but droplet size decreases much more substantially for the continental regime, suggesting different mixing processes for the continental and maritime conditions. The investigation and measurements of radiation clouds were coupled with a unique cloud modeling. A novel spectral bin microphysics was developed and implemented to the System of Atmospheric Modeling (SAM). In order to resolve cloud transition zones with high spatial gradients of microphysical variables a unique high resolution (10 m) was used in simulations. The model calculates droplet size distributions in each grid point. The model output was transferred to the NASA/GSFC team for utilization in radiative calculations and testing of both radiative algorithm and model representation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The Impact of Stochastic Perturbations in Physics Variables for Predicting Surface Solar Irradiance

We present a probabilistic framework tailored for solar energy applications referred to as the Weather Research and Forecasting-Solar ensemble prediction system (WRF-Solar EPS). WRF-Solar EPS has been developed by introducing stochastic perturbations into the most relevant physical variables for solar irradiance predictions. In this study, we comprehensively discuss the impact of the stochastic perturbations of WRF-Solar EPS on solar irradiance forecasting compared to a deterministic WRF-Solar prediction (WRF-Solar DET), a stochastic ensemble using the stochastic kinetic energy backscatter scheme (SKEBS), and a WRF-Solar multi-physics ensemble (WRF-Solar PHYS). The performances of the four forecasts are evaluated using irradiance retrievals from the National Solar Radiation Database (NSRDB) over the contiguous United States. We focus on the predictability of the day-ahead solar irradiance forecasts during the year of 2018. The results show that the ensemble forecasts improve the quality of the forecasts, compared to the deterministic prediction system, by accounting for the uncertainty derived by the ensemble members. However, the three ensemble systems are under-dispersive, producing unreliable and overconfident forecasts due to a lack of calibration. In particular, WRF-Solar EPS produces less optically thick clouds than the other forecasts, which explains the larger positive bias in WRF-Solar EPS (31.7 W/m 2 ) than in the other models (22.7–23.6 W/m 2 ). This study confirms that the WRF-Solar EPS reduced the forecast error by 7.5% in terms of the mean absolute error (MAE) compared to WRF-Solar DET, and provides in-depth comparisons of forecast abilities with the conventional scientific probabilistic approaches (i.e., SKEBS and a multi-physics ensemble). Guidelines for improving the performance of WRF-Solar EPS in the future are provided.

14 SOLAR ENERGY↗
DOE OSTI2020

The Hubble Space Telescope PanCET Program: An Optical to Infrared Transmission Spectrum of HAT-P-32Ab

We present a 0.3−5 μm transmission spectrum of the hot Jupiter HAT-P-32Ab observed with the Space Telescope Imaging Spectrograph and Wide Field Camera 3 instruments mounted on the Hubble Space Telescope, combined with Spitzer Infrared Array Camera photometry. The spectrum is composed of 51 spectrophotometric bins with widths ranging between 150 and 400 Å, measured to a median precision of 215 ppm. Comparisons of the observed transmission spectrum to a grid of 1D radiative-convective equilibrium models indicate the presence of clouds/hazes, consistent with previous transit observations and secondary eclipse measurements. To provide more robust constraints on the planet’s atmospheric properties, we perform the first full optical to infrared retrieval analysis for this planet. The retrieved spectrum is consistent with a limb temperature of 1248{sub −92}{sup +92} K, a thick cloud deck, enhanced Rayleigh scattering, and ∼10× solar H{sub 2}O abundance. We find log(Z/Z {sub ⊙}) = 2.41{sub −0.07}{sup +0.06}, and compare this measurement with the mass–metallicity relation derived for the solar system.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Machine-learning-based investigation of the variables affecting summertime lightning occurrence over the Southern Great Plains

Lightning is affected by many factors, many of which are not routinely measured, well understood, or accounted for in physical models. Several commonly used machine learning (ML) models have been applied to analyze the relationship between Atmospheric Radiation Measurement (ARM) data and lightning data from the Earth Networks Total Lightning Network (ENTLN) in order to identify important variables affecting lightning occurrence in the vicinity of the Southern Great Plains (SGP) ARM site during the summer months (June, July, August and September) of 2012 to 2020. Testing various ML models, we found that the random forest model is the best predictor among common classifiers. When convective clouds were detected, it predicts lightning occurrence with an accuracy of 76.9 % and an area under the curve (AUC) of 0.850. Using this model, we further ranked the variables in terms of their effectiveness in nowcasting lightning and identified geometric cloud thickness, rain rate and convective available potential energy (CAPE) as the most effective predictors. The contrast in meteorological variables between no-lightning and frequent-lightning periods was examined for hours with CAPE values conducive to thunderstorm formation. Besides the variables considered for the ML models, surface variables and mid-altitude variables (e.g., equivalent potential temperature and minimum equivalent potential temperature, respectively) have statistically significant contrasts between no-lightning and frequent-lightning hours. For example, the minimum equivalent potential temperature from 700 to 500 hPa is significantly lower during frequent-lightning hours compared with no-lightning hours. Finally, a notable positive relationship between the intracloud (IC) flash fraction and the square root of CAPE ($\sqrt{CAPE}$) was found, suggesting that stronger updrafts increase the height of the electrification zone, resulting in fewer flashes reaching the surface and consequently a greater IC flash fraction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Influence of covariance of aerosol and meteorology on co-located precipitating and non-precipitating clouds over the Indo-Gangetic Plain

Aerosol–cloud–precipitation interaction (ACPI) plays a pivotal role in the global and regional water cycle and the earth's energy budget; however, it remains highly uncertain due to the different underlying physical mechanisms. Therefore, this study aims to systematically analyze the effects of aerosols and meteorological factors on ACPI in the co-located precipitating clouds (PCs) and non-precipitating clouds (NPCs) in winter and summer seasons by employing the long-term (2001–2021) retrievals from the Moderate Resolution Imaging Spectroradiometer (MODIS) and Tropical Rainfall Measuring Mission (TRMM) coupled with the National Center for Environmental Prediction/National Center for Atmospheric Research (NCEP/NCAR) reanalysis-II datasets over the Indo-Gangetic Plain (IGP). The results exhibit a decadal increase in aerosol optical depth (AOD) over Lahore (5.2 %), Delhi (9 %), Kanpur (10.7 %), and Gandhi College (22.7 %) and a decrease over Karachi (-1.9 %) and Jaipur (-0.5 %). The most stable meteorology with high values of lower-tropospheric stability (LTS) is found in both seasons over Karachi. In the summer season, the occurrence frequency of clouds is high (74 %) over Gandhi College, 60 % of which are PCs. Conversely, the lowest number of PCs is found over Karachi. Similarly, in the winter season, the frequency of cloud occurrence is low over Karachi and high over Lahore and Gandhi College. The analysis of cloud top pressure (CTP) and cloud optical thickness (COT) indicates high values of cloud fraction (CF) for thick and high-level clouds over all study areas except Karachi. The microphysical properties such as cloud effective radius (CER) and cloud droplet number concentration (CDNC) bear high values (CER ≳ 15 µm and CDNC ≳ 50 cm -3 ) for both NPCs and PCs in summer. The AOD–CER correlation is good (weak) for PCs (NPCs) in winter. Similarly, the sensitivity value of the first indirect effect (FIE) is high (ranging from 0.2 ± 0.13 to 0.3 ± 0.01 in winter and from 0.19 ± 0.03 to 0.32 ± 0.05 in summer) for PCs and low for NPCs. The sensitivity value for the second indirect effect (SIE) is relatively higher (such as 0.6 ± 0.14 in winter and 0.4 ± 0.04 in summer) than FIE. Sensitivity values of the aerosol-cloud interaction (ACI) are low (i.e., -0.06 ± 0.09) for PCs in summer. Furthermore, the precipitation rate (PR) exhibits high values in the summer season, primarily due to the significant contribution from optically thick clouds with lower CDNC (≲ 50 cm -3 ) and larger CER and the intermediate contribution from optically thick clouds with higher CDNC ( ≳ 50 cm -3 ).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Understanding Biases in Simulated Cloud Radiative Effects in E3SMv3

This study systematically investigates biases in cloud radiative effects (CREs) within the recently released Energy Exascale Earth System Model version 3 (E3SMv3). Compared to its previous version (E3SMv2), E3SMv3 shows excessively strong shortwave CRE over tropical and subtropical oceans, the Southern Ocean, and the Northern Hemisphere storm tracks, which is primarily caused by an overestimation of optically intermediate low clouds. The model also displays excessive longwave CRE over the Maritime Continent and other tropical deep convection regions, resulting from an overestimation of optically thick high clouds. Implementing the Predicted Particle Properties (P3) scheme for stratiform clouds played the most significant role in these cloud changes. In addition, using a double-moment scheme for convective clouds contributed to the increase in intermediate low clouds and optically thick clouds in tropical deep convection regions. Error metrics for total cloud amount (E TCA ), cloud properties (E ctp-τ ), and cloud properties weighted by their SW and LW radiative impacts (E SW and E LW ) indicate that E3SMv3's ability to reproduce observed cloud radiative effect of low, middle, and high clouds has not been improved compared to E3SMv2. Nevertheless, the performance of E3SMv3 remains well within the spread of CMIP6 models, with E SW and E LW values smaller than those in most CMIP6 models. This study underscores the importance of integrating diverse satellite observations for robust cloud evaluation and using cloud-radiation relationships as consistency check for model errors. It suggests that further model developments focus on improving cloud microphysics and their interactions with radiation.

Environmental sciences↗